示例#1
0
文件: flash.c 项目: abtink/openthread
otError utilsFlashStatusWait(uint32_t aTimeout)
{
    otError error = OT_ERROR_BUSY;

    if (aTimeout == 0)
    {
        if (!nrf5FlashIsBusy())
        {
            error = OT_ERROR_NONE;
        }
    }
    else
    {
        uint32_t startTime = otPlatAlarmMilliGetNow();

        do
        {
            if (!nrf5FlashIsBusy())
            {
                error = OT_ERROR_NONE;
                break;
            }
        } while (otPlatAlarmMilliGetNow() - startTime < aTimeout);
    }

    return error;
}
示例#2
0
void ExampleProcess(otInstance *aInstance)
{
    static int    aliveLEDcounter = 0;
    otDeviceRole  devRole;
    static int    thrValue;

    devRole = otThreadGetDeviceRole(aInstance);

    if (sBlink == false && otPlatAlarmMilliGetNow() != 0)
    {
        sMsCounterInit = otPlatAlarmMilliGetNow();
        sBlink = true;
    }

    sMsCounter = otPlatAlarmMilliGetNow() - sMsCounterInit;

    switch (devRole)
    {
    case OT_DEVICE_ROLE_LEADER:
        thrValue = LEADER_BLINK_TIME;
        break;

    case OT_DEVICE_ROLE_ROUTER:
        thrValue = ROUTER_BLINK_TIME;
        break;

    case OT_DEVICE_ROLE_CHILD:
        thrValue = CHILD_BLINK_TIME;
        break;

    default:
        thrValue = 0x00;
    }

    if ((thrValue != 0x00) && (sMsCounter >= thrValue))
    {
        hw_gpio_toggle(HW_GPIO_PORT_1, HW_GPIO_PIN_5);
        sMsCounterInit = otPlatAlarmMilliGetNow();
    }

    if (thrValue == 0)
    {
        // No specific role, let's generate 'alive blink'
        // to inform that we are running.
        // Loop counter is used to run even if timers
        // are not initialized yet.
        aliveLEDcounter++;

        if (aliveLEDcounter > ALIVE_LED_PERIOD)
        {
            aliveLEDcounter = 0;
            hw_gpio_set_active(HW_GPIO_PORT_1, HW_GPIO_PIN_5);
        }

        if (aliveLEDcounter > ALIVE_LED_DUTY)
        {
            hw_gpio_set_inactive(HW_GPIO_PORT_1, HW_GPIO_PIN_5);
        }
    }
}
示例#3
0
static void waitInState(SdFlashState state)
{
    uint32_t startTime = otPlatAlarmMilliGetNow();

    do
    {
        nrf_sdh_evts_poll();

        if (sState != state)
        {
            break;
        }
    }
    while (otPlatAlarmMilliGetNow() - startTime < FLASH_TIMEOUT);
}
示例#4
0
文件: alarm.c 项目: nodish/openthread
/**
 * Function documented in platform-cc2650.h
 */
void cc2650AlarmProcess(otInstance *aInstance)
{
    uint32_t offsetTime;

    if (sIsRunning)
    {
        /* unsinged subtraction will result in the absolute offset */
        offsetTime = otPlatAlarmMilliGetNow() - sTime0;

        if (sAlarmTime <= offsetTime)
        {
            sIsRunning = false;
#if OPENTHREAD_ENABLE_DIAG

            if (otPlatDiagModeGet())
            {
                otPlatDiagAlarmFired(aInstance);
            }
            else
#endif /* OPENTHREAD_ENABLE_DIAG */
            {
                otPlatAlarmMilliFired(aInstance);
            }
        }
    }
}
示例#5
0
static void cdcAcmUserEventHandler(app_usbd_class_inst_t const *aCdcAcmInstance, app_usbd_cdc_acm_user_event_t aEvent)
{
    app_usbd_cdc_acm_t const *cdcAcmClass = app_usbd_cdc_acm_class_get(aCdcAcmInstance);

    switch (aEvent)
    {
    case APP_USBD_CDC_ACM_USER_EVT_PORT_OPEN:
        // Setup first transfer.
        (void)app_usbd_cdc_acm_read_any(&sAppCdcAcm, sRxBuffer, sizeof(sRxBuffer));
        sUsbState.mOpenTimestamp = otPlatAlarmMilliGetNow();
        break;

    case APP_USBD_CDC_ACM_USER_EVT_PORT_CLOSE:
        break;

    case APP_USBD_CDC_ACM_USER_EVT_TX_DONE:
        sUsbState.mTransferDone = true;
        break;

    case APP_USBD_CDC_ACM_USER_EVT_RX_DONE:
        sUsbState.mReceiveDone = true;
        // Get amount of data received.
        sUsbState.mReceivedDataSize = app_usbd_cdc_acm_rx_size(cdcAcmClass);
        break;

    default:
        break;
    }
}
示例#6
0
文件: flash.c 项目: abtink/openthread
otError utilsFlashStatusWait(uint32_t aTimeout)
{
    otError  error = OT_ERROR_BUSY;
    uint32_t start = otPlatAlarmMilliGetNow();

    do
    {
        if (FTFA->FSTAT & FTFA_FSTAT_CCIF_MASK)
        {
            error = OT_ERROR_NONE;
            break;
        }
    } while (aTimeout && ((otPlatAlarmMilliGetNow() - start) < aTimeout));

    return error;
}
示例#7
0
文件: radio.c 项目: nodish/openthread
static void handleRx(void)
{
    if (sRxDone)
    {
        sRxDone = false;

        if (otPlatRadioGetPromiscuous(sInstance))
        {
            // Timestamp
            sReceiveFrame.mInfo.mRxInfo.mMsec = otPlatAlarmMilliGetNow();
            sReceiveFrame.mInfo.mRxInfo.mUsec = 0; // Don't support microsecond timer for now.
        }

#if OPENTHREAD_ENABLE_DIAG

        if (otPlatDiagModeGet())
        {
            otPlatDiagRadioReceiveDone(sInstance, &sReceiveFrame, OT_ERROR_NONE);
        }
        else
#endif
        {
            // signal MAC layer for each received frame if promiscous is enabled
            // otherwise only signal MAC layer for non-ACK frame
            if (sPromiscuous || sReceiveFrame.mLength > IEEE802154_ACK_LENGTH)
            {
                otLogDebgPlat(sInstance, "Radio receive done, rssi: %d", sReceiveFrame.mInfo.mRxInfo.mRssi);

                otPlatRadioReceiveDone(sInstance, &sReceiveFrame, OT_ERROR_NONE);
            }
        }
    }
}
示例#8
0
otError utilsFlashStatusWait(uint32_t aTimeout)
{
    otError  error = OT_ERROR_BUSY;
    uint32_t start = otPlatAlarmMilliGetNow();

    do
    {
        if (MSC->STATUS & MSC_STATUS_WDATAREADY)
        {
            error = OT_ERROR_NONE;
            break;
        }
    } while (aTimeout && ((otPlatAlarmMilliGetNow() - start) < aTimeout));

    return error;
}
示例#9
0
文件: flash.c 项目: abtink/openthread
otError utilsFlashStatusWait(uint32_t aTimeout)
{
    otError  error = OT_ERROR_BUSY;
    uint32_t start = otPlatAlarmMilliGetNow();

    do
    {
        if (nvm_is_ready())
        {
            error = OT_ERROR_NONE;
            break;
        }
    } while (aTimeout && ((otPlatAlarmMilliGetNow() - start) < aTimeout));

    return error;
}
示例#10
0
文件: radio.c 项目: nodish/openthread
otError otPlatRadioEnergyScan(otInstance *aInstance, uint8_t aScanChannel, uint16_t aScanDuration)
{
    (void)aInstance;

    sScanStartTime = otPlatAlarmMilliGetNow();
    sScanDuration  = aScanDuration;

    sMaxRssi = PHY_EdReq();

    sStartScan = true;

    return OT_ERROR_NONE;
}
示例#11
0
/* this should not be a WEAK function */
void otPlatLog(otLogLevel aLogLevel, otLogRegion aLogRegion, const char *aFormat, ...)
{
    OT_UNUSED_VARIABLE(aLogLevel);
    OT_UNUSED_VARIABLE(aLogRegion);

    va_list  ap;
    uint32_t now;

    now = otPlatAlarmMilliGetNow();
    otPlatDebugUart_printf("%3d.%03d | ", (int)(now / 1000), (int)(now % 1000));
    va_start(ap, aFormat);
    otPlatDebugUart_vprintf(aFormat, ap);
    va_end(ap);

    otPlatDebugUart_putchar('\n');
}
示例#12
0
文件: alarm.c 项目: turon/openthread
void platformAlarmProcess(otInstance *aInstance)
{
    int32_t remaining;

    if (sIsMsRunning)
    {
        remaining = (int32_t)(sMsAlarm - otPlatAlarmMilliGetNow());

        if (remaining <= 0)
        {
            sIsMsRunning = false;

#if OPENTHREAD_ENABLE_DIAG

            if (otPlatDiagModeGet())
            {
                otPlatDiagAlarmFired(aInstance);
            }
            else
#endif
            {
                otPlatAlarmMilliFired(aInstance);
            }
        }
    }

#if OPENTHREAD_CONFIG_ENABLE_PLATFORM_USEC_TIMER

    if (sIsUsRunning)
    {
        remaining = (int32_t)(sUsAlarm - otPlatAlarmMicroGetNow());

        if (remaining <= 0)
        {
            sIsUsRunning = false;

            otPlatAlarmMicroFired(aInstance);
        }
    }

#endif // OPENTHREAD_CONFIG_ENABLE_PLATFORM_USEC_TIMER
}
示例#13
0
void efr32AlarmProcess(otInstance *aInstance)
{
    uint32_t now = otPlatAlarmMilliGetNow();
    uint32_t expires;
    bool     fire = false;

    otEXPECT(sIsRunning);

    expires = sAlarmT0 + sAlarmDt;

    if (sAlarmT0 <= now)
    {
        fire = (expires >= sAlarmT0 && expires <= now);
    }
    else
    {
        fire = (expires >= sAlarmT0 || expires <= now);
    }

    if (fire)
    {
        sIsRunning = false;

#if OPENTHREAD_ENABLE_DIAG

        if (otPlatDiagModeGet())
        {
            otPlatDiagAlarmFired(aInstance);
        }
        else
#endif
        {
            otPlatAlarmMilliFired(aInstance);
        }
    }

exit:
    return;
}
示例#14
0
文件: radio.c 项目: nodish/openthread
static void handleEnergyScan()
{
    if (sStartScan)
    {
        if ((otPlatAlarmMilliGetNow() - sScanStartTime) < sScanDuration)
        {
            int8_t curRssi = PHY_EdReq();

            if (curRssi > sMaxRssi)
            {
                sMaxRssi = curRssi;
            }
        }
        else
        {
            sStartScan = false;

            otPlatRadioEnergyScanDone(sInstance, sMaxRssi);

            radioRestore();
        }
    }
}
示例#15
0
static bool hasPortOpenDelayPassed(void)
{
    int32_t timeDiff = otPlatAlarmMilliGetNow() - sUsbState.mOpenTimestamp;

    return (timeDiff < 0) || (timeDiff > USB_HOST_UART_CONFIG_DELAY_MS);
}