/**
* spl_relocate_stack_gd() - Relocate stack ready for board_init_r() execution
*
* Sometimes board_init_f() runs with a stack in SRAM but we want to use SDRAM
* for the main board_init_r() execution. This is typically because we need
* more stack space for things like the MMC sub-system.
*
* This function calculates the stack position, copies the global_data into
* place, sets the new gd (except for ARM, for which setting GD within a C
* function may not always work) and returns the new stack position. The
* caller is responsible for setting up the sp register and, in the case
* of ARM, setting up gd.
*
* All of this is done using the same layout and alignments as done in
* board_init_f_init_reserve() / board_init_f_alloc_reserve().
*
* @return new stack location, or 0 to use the same stack
*/
ulong spl_relocate_stack_gd(void)
{
#ifdef CONFIG_SPL_STACK_R
gd_t *new_gd;
ulong ptr = CONFIG_SPL_STACK_R_ADDR;
#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
if (CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN) {
if (!(gd->flags & GD_FLG_SPL_INIT))
panic_str("spl_init must be called before heap reloc");
ptr -= CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN;
gd->malloc_base = ptr;
gd->malloc_limit = CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN;
gd->malloc_ptr = 0;
}
#endif
/* Get stack position: use 8-byte alignment for ABI compliance */
ptr = CONFIG_SPL_STACK_R_ADDR - roundup(sizeof(gd_t),16);
new_gd = (gd_t *)ptr;
memcpy(new_gd, (void *)gd, sizeof(gd_t));
#if !defined(CONFIG_ARM)
gd = new_gd;
#endif
return ptr;
#else
return 0;
#endif
}
static void serial_find_console_or_panic(void)
{
struct udevice *dev;
#ifdef CONFIG_OF_CONTROL
int node;
/* Check for a chosen console */
node = fdtdec_get_chosen_node(gd->fdt_blob, "stdout-path");
if (node < 0)
node = fdt_path_offset(gd->fdt_blob, "console");
if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node, &dev)) {
gd->cur_serial_dev = dev;
return;
}
/*
* If the console is not marked to be bound before relocation, bind
* it anyway.
*/
if (node > 0 &&
!lists_bind_fdt(gd->dm_root, gd->fdt_blob, node, &dev)) {
if (!device_probe(dev)) {
gd->cur_serial_dev = dev;
return;
}
}
#endif
/*
* Try to use CONFIG_CONS_INDEX if available (it is numbered from 1!).
*
* Failing that, get the device with sequence number 0, or in extremis
* just the first serial device we can find. But we insist on having
* a console (even if it is silent).
*/
#ifdef CONFIG_CONS_INDEX
#define INDEX (CONFIG_CONS_INDEX - 1)
#else
#define INDEX 0
#endif
if (uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &dev) &&
uclass_get_device(UCLASS_SERIAL, INDEX, &dev) &&
(uclass_first_device(UCLASS_SERIAL, &dev) || !dev))
panic_str("No serial driver found");
#undef INDEX
gd->cur_serial_dev = dev;
}
static void serial_find_console_or_panic(void)
{
const void *blob = gd->fdt_blob;
struct udevice *dev;
int node;
if (CONFIG_IS_ENABLED(OF_CONTROL) && blob) {
/* Check for a chosen console */
node = fdtdec_get_chosen_node(blob, "stdout-path");
if (node < 0) {
const char *str, *p, *name;
/*
* Deal with things like
* stdout-path = "serial0:115200n8";
*
* We need to look up the alias and then follow it to
* the correct node.
*/
str = fdtdec_get_chosen_prop(blob, "stdout-path");
if (str) {
p = strchr(str, ':');
name = fdt_get_alias_namelen(blob, str,
p ? p - str : strlen(str));
if (name)
node = fdt_path_offset(blob, name);
}
}
if (node < 0)
node = fdt_path_offset(blob, "console");
if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node,
&dev)) {
gd->cur_serial_dev = dev;
return;
}
/*
* If the console is not marked to be bound before relocation,
* bind it anyway.
*/
if (node > 0 &&
!lists_bind_fdt(gd->dm_root, blob, node, &dev)) {
if (!device_probe(dev)) {
gd->cur_serial_dev = dev;
return;
}
}
}
if (!SPL_BUILD || !CONFIG_IS_ENABLED(OF_CONTROL) || !blob) {
/*
* Try to use CONFIG_CONS_INDEX if available (it is numbered
* from 1!).
*
* Failing that, get the device with sequence number 0, or in
* extremis just the first serial device we can find. But we
* insist on having a console (even if it is silent).
*/
#ifdef CONFIG_CONS_INDEX
#define INDEX (CONFIG_CONS_INDEX - 1)
#else
#define INDEX 0
#endif
if (!uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &dev) ||
!uclass_get_device(UCLASS_SERIAL, INDEX, &dev) ||
(!uclass_first_device(UCLASS_SERIAL, &dev) && dev)) {
gd->cur_serial_dev = dev;
return;
}
#undef INDEX
}
#ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
panic_str("No serial driver found");
#endif
}
static void serial_find_console_or_panic(void)
{
const void *blob = gd->fdt_blob;
struct udevice *dev;
#ifdef CONFIG_SERIAL_SEARCH_ALL
int ret;
#endif
if (CONFIG_IS_ENABLED(OF_PLATDATA)) {
uclass_first_device(UCLASS_SERIAL, &dev);
if (dev) {
gd->cur_serial_dev = dev;
return;
}
} else if (CONFIG_IS_ENABLED(OF_CONTROL) && blob) {
/* Live tree has support for stdout */
if (of_live_active()) {
struct device_node *np = of_get_stdout();
if (np && !uclass_get_device_by_ofnode(UCLASS_SERIAL,
np_to_ofnode(np), &dev)) {
gd->cur_serial_dev = dev;
return;
}
} else {
if (!serial_check_stdout(blob, &dev)) {
gd->cur_serial_dev = dev;
return;
}
}
}
if (!SPL_BUILD || !CONFIG_IS_ENABLED(OF_CONTROL) || !blob) {
/*
* Try to use CONFIG_CONS_INDEX if available (it is numbered
* from 1!).
*
* Failing that, get the device with sequence number 0, or in
* extremis just the first working serial device we can find.
* But we insist on having a console (even if it is silent).
*/
#ifdef CONFIG_CONS_INDEX
#define INDEX (CONFIG_CONS_INDEX - 1)
#else
#define INDEX 0
#endif
#ifdef CONFIG_SERIAL_SEARCH_ALL
if (!uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &dev) ||
!uclass_get_device(UCLASS_SERIAL, INDEX, &dev)) {
if (dev->flags & DM_FLAG_ACTIVATED) {
gd->cur_serial_dev = dev;
return;
}
}
/* Search for any working device */
for (ret = uclass_first_device_check(UCLASS_SERIAL, &dev);
dev;
ret = uclass_next_device_check(&dev)) {
if (!ret) {
/* Device did succeed probing */
gd->cur_serial_dev = dev;
return;
}
}
#else
if (!uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &dev) ||
!uclass_get_device(UCLASS_SERIAL, INDEX, &dev) ||
(!uclass_first_device(UCLASS_SERIAL, &dev) && dev)) {
gd->cur_serial_dev = dev;
return;
}
#endif
#undef INDEX
}
#ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
panic_str("No serial driver found");
#endif
}
