static void pca_stop(struct i2c_algo_pca_data *adap)
{
int sta = pca_get_con(adap);
DEB2("=== STOP\n");
sta |= I2C_PCA_CON_STO;
sta &= ~(I2C_PCA_CON_STA|I2C_PCA_CON_SI);
pca_set_con(adap, sta);
}
static int pca_repeated_start(struct i2c_algo_pca_data *adap)
{
int sta = pca_get_con(adap);
DEB2("=== REPEATED START\n");
sta |= I2C_PCA_CON_STA;
sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_SI);
pca_set_con(adap, sta);
return pca_wait(adap);
}
/*
* Generate a start condition on the i2c bus.
*
* returns after the start condition has occured
*/
static void pca_start(struct i2c_algo_pca_data *adap)
{
int sta = pca_get_con(adap);
DEB2("=== START\n");
sta |= I2C_PCA_CON_STA;
sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_SI);
pca_set_con(adap, sta);
pca_wait(adap);
}
static int pca_tx_byte(struct i2c_algo_pca_data *adap,
__u8 b)
{
int sta = pca_get_con(adap);
DEB2("=== WRITE %#04x\n", b);
pca_outw(adap, I2C_PCA_DAT, b);
sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI);
pca_set_con(adap, sta);
return pca_wait(adap);
}
static int pca_rx_ack(struct i2c_algo_pca_data *adap,
int ack)
{
int sta = pca_get_con(adap);
sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI|I2C_PCA_CON_AA);
if (ack)
sta |= I2C_PCA_CON_AA;
pca_set_con(adap, sta);
return pca_wait(adap);
}
static int pca_init(struct i2c_algo_pca_data *adap)
{
static int freqs[] = {330,288,217,146,88,59,44,36};
int own, clock;
own = pca_own(adap);
clock = pca_clock(adap);
DEB1(KERN_INFO DRIVER ": own address is %#04x\n", own);
DEB1(KERN_INFO DRIVER ": clock freqeuncy is %dkHz\n", freqs[clock]);
pca_outw(adap, I2C_PCA_ADR, own << 1);
pca_set_con(adap, I2C_PCA_CON_ENSIO | clock);
udelay(500); /* 500 µs for oscilator to stabilise */
return 0;
}
static int pca_address(struct i2c_algo_pca_data *adap,
struct i2c_msg *msg)
{
int sta = pca_get_con(adap);
int addr;
addr = ((0x7f & msg->addr) << 1);
if (msg->flags & I2C_M_RD)
addr |= 1;
DEB2("=== SLAVE ADDRESS %#04x+%c=%#04x\n",
msg->addr, msg->flags & I2C_M_RD ? 'R' : 'W', addr);
pca_outw(adap, I2C_PCA_DAT, addr);
sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI);
pca_set_con(adap, sta);
return pca_wait(adap);
}
static int pca_init(struct i2c_adapter *adap)
{
struct i2c_algo_pca_data *pca_data = adap->algo_data;
adap->algo = &pca_algo;
if (pca_probe_chip(adap) == I2C_PCA_CHIP_9564) {
static int freqs[] = {330, 288, 217, 146, 88, 59, 44, 36};
int clock;
if (pca_data->i2c_clock > 7) {
switch (pca_data->i2c_clock) {
case 330000:
pca_data->i2c_clock = I2C_PCA_CON_330kHz;
break;
case 288000:
pca_data->i2c_clock = I2C_PCA_CON_288kHz;
break;
case 217000:
pca_data->i2c_clock = I2C_PCA_CON_217kHz;
break;
case 146000:
pca_data->i2c_clock = I2C_PCA_CON_146kHz;
break;
case 88000:
pca_data->i2c_clock = I2C_PCA_CON_88kHz;
break;
case 59000:
pca_data->i2c_clock = I2C_PCA_CON_59kHz;
break;
case 44000:
pca_data->i2c_clock = I2C_PCA_CON_44kHz;
break;
case 36000:
pca_data->i2c_clock = I2C_PCA_CON_36kHz;
break;
default:
printk(KERN_WARNING
"%s: Invalid I2C clock speed selected."
" Using default 59kHz.\n", adap->name);
pca_data->i2c_clock = I2C_PCA_CON_59kHz;
}
} else {
printk(KERN_WARNING "%s: "
"Choosing the clock frequency based on "
"index is deprecated."
" Use the nominal frequency.\n", adap->name);
}
pca_reset(pca_data);
clock = pca_clock(pca_data);
printk(KERN_INFO "%s: Clock frequency is %dkHz\n",
adap->name, freqs[clock]);
pca_set_con(pca_data, I2C_PCA_CON_ENSIO | clock);
} else {
int clock;
int mode;
int tlow, thi;
/* Values can be found on PCA9665 datasheet section 7.3.2.6 */
int min_tlow, min_thi;
/* These values are the maximum raise and fall values allowed
* by the I2C operation mode (Standard, Fast or Fast+)
* They are used (added) below to calculate the clock dividers
* of PCA9665. Note that they are slightly different of the
* real maximum, to allow the change on mode exactly on the
* maximum clock rate for each mode
*/
int raise_fall_time;
/* Ignore the reset function from the module,
* we can use the parallel bus reset
*/
pca_data->reset_chip = pca9665_reset;
if (pca_data->i2c_clock > 1265800) {
printk(KERN_WARNING "%s: I2C clock speed too high."
" Using 1265.8kHz.\n", adap->name);
pca_data->i2c_clock = 1265800;
}
if (pca_data->i2c_clock < 60300) {
printk(KERN_WARNING "%s: I2C clock speed too low."
" Using 60.3kHz.\n", adap->name);
pca_data->i2c_clock = 60300;
}
/* To avoid integer overflow, use clock/100 for calculations */
clock = pca_clock(pca_data) / 100;
if (pca_data->i2c_clock > 10000) {
mode = I2C_PCA_MODE_TURBO;
min_tlow = 14;
min_thi = 5;
raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
} else if (pca_data->i2c_clock > 4000) {
mode = I2C_PCA_MODE_FASTP;
min_tlow = 17;
min_thi = 9;
raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
} else if (pca_data->i2c_clock > 1000) {
mode = I2C_PCA_MODE_FAST;
min_tlow = 44;
min_thi = 20;
raise_fall_time = 58; /* Raise 29e-8s, Fall 29e-8s */
} else {
mode = I2C_PCA_MODE_STD;
min_tlow = 157;
min_thi = 134;
raise_fall_time = 127; /* Raise 29e-8s, Fall 98e-8s */
}
/* The minimum clock that respects the thi/tlow = 134/157 is
* 64800 Hz. Below that, we have to fix the tlow to 255 and
* calculate the thi factor.
*/
if (clock < 648) {
tlow = 255;
thi = 1000000 - clock * raise_fall_time;
thi /= (I2C_PCA_OSC_PER * clock) - tlow;
} else {
tlow = (1000000 - clock * raise_fall_time) * min_tlow;
tlow /= I2C_PCA_OSC_PER * clock * (min_thi + min_tlow);
thi = tlow * min_thi / min_tlow;
}
pca_reset(pca_data);
printk(KERN_INFO
"%s: Clock frequency is %dHz\n", adap->name, clock * 100);
pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IMODE);
pca_outw(pca_data, I2C_PCA_IND, mode);
pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
pca_outw(pca_data, I2C_PCA_IND, tlow);
pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
pca_outw(pca_data, I2C_PCA_IND, thi);
pca_set_con(pca_data, I2C_PCA_CON_ENSIO);
}
udelay(500); /* 500 us for oscilator to stabilise */
return 0;
}
