void pciscan(Console c) {
for (u8 bus = 0; bus < 255; bus++) {
for (u8 dev = 0; dev < 32; dev++) {
PciConf conf = pciconfread(bus, dev);
if ((conf.device_id == 0xffff) || (conf.vendor_id == 0xffff)) {
continue;
}
cprint(c, "pci(bus,dev): ("), cprintint(c, bus, 16, 0), cputc(c, ','),
cprintint(c, dev, 16, 0), cputc(c, ')'), cnl(c);
cprint(c, "device id: "), cprintint(c, conf.device_id, 16, 0),
cnl(c);
cprint(c, "vendor id: "), cprintint(c, conf.vendor_id, 16, 0),
cnl(c);
for (int i = 0; i < 6; ++i) {
u64 size = conf.dev.base_address_register[i].size;
if (size) {
switch (conf.dev.base_address_register[i].tag) {
case PciBarInvalid: {
cprint(c, " Invalid bar:");
break;
}
case PciBarM16: {
cprint(c, " M16 Bar:");
break;
}
case PciBarM32: {
cprint(c, " M32 Bar:");
break;
}
case PciBarM64: {
cprint(c, " M64 Bar:");
break;
}
case PciBarIO: {
cprint(c, " IO Bar:");
break;
}
}
cprintint(c, conf.dev.base_address_register[i].size, 16, 0);
}
}
cnl(c);
}
}
}
static void pciconfreadCall(const iocshArgBuf *args)
{
pciconfread(args[0].ival, args[1].ival, args[2].ival);
}
int kernel_main() {
ConsoleDesc cd = {0, 0xf0, (unsigned short *)0xb8000};
Console c = &cd;
cclear(c,0xff);
{
const u16 com1 = 0x3f8;
outb(com1 + 1, 0x00); // Disable all interrupts
outb(com1 + 3, 0x80); // Enable DLAB (set baud rate divisor)
outb(com1 + 0, 0x03); // Set divisor to 3 (lo byte) 38400 baud
outb(com1 + 1, 0x00); // (hi byte)
outb(com1 + 3, 0x03); // 8 bits, no parity, one stop bit
outb(com1 + 2, 0xC7); // Enable FIFO, clear them, with 14-byte threshold
outb(com1 + 4, 0x0B); // IRQs enabled, RTS/DSR set
if (0) {
for (;;) {
if(inb(com1 + 5) & 1) {
char ch = inb(com1);
cputc(c, ch);
}
}
}
}
pciscan(c); // This is to test pci traversal.
// Ethernet
if (0) {
PciConf eth = pciconfread(0, 3);
cprintpciconf(c, eth);
e1000init(0, ð, c);
}
// for (;;);
// Instead of a proper memory allocator we just allocate permanently
// from one large Arena, this is only a temporary solution.
// Eventually we want to guarantee that processes and tasks get
// different arenas with potential overlap in a single address
// space.
Arena* a;
arenainit(a, 1000*1000*1000*sizeof(u8), (void *)0x100000);
// Functions that need to allocate memory need to be passed a memory
// arena as part of their execution context.
// initialize all known hardware, so far there is no dynamic device
// discovery, instead we hardcode the locations of the devices on
// the pci bus
// AcpiDesc acpi = {};
// acpiinit(&acpi, c);
// nvme
if (0) {
PciConf conf = pciconfread(0,3);
cprintpciconf(c, conf);
nvmepciinit(a, c, conf);
}
// Ahci code doesn't work yet.
// ahcipciinit(a, c, 0, 4);
// Eventually we want to enable all CPU features found during detection.
cpudetect(c);
{
M44 m = (M44){1,1,0,0,
0,1,0,0,
0,0,1,0,
0,0,0,1};
V4 v = {1,
0,
0,
0};
V4 w = {0,
1,
0,
0};
V4 u = v4avv(v, w);
cprintv4(c, u);
cprintv4(c, v4msv(2, u));
cprintv4(c, v4mmv(m44i(), u));
cprintm44(c, m44i());
cprintm44(c, v4msm(2, m44i()));
cprintm44(c, v4mmm(v4msm(2, m44i()), m44i()));
cprintm44(c, v4mmm(m, m));
}
for (;;);
// Graphics only work with bochs emulator
{
u32 *framebufferaddr;
{
// 0x1234:0x1111
PciConf vesa = pciconfread(0, 2);
framebufferaddr = (u32 *)vesa.dev.base_address_register[0].address;
}
vbeset(1920, 1200, 32);
int offset = 0;
// clear the screen to light grey
for (int i = 0; i < 1920; ++i) {
for (int j = 0; j<1200; ++j) {
offset = (j * 1920 + i);
// Format is 0x00rrggbb, can use first byte for alpha blending / z-buffering
framebufferaddr[offset] = 0x00eeeeee;
}
}
// draw a "line"
for (int i = 0; i < 1920; ++i) {
offset = (50 * 1920 + i);
// Format is 0x00rrggbb, can use first byte for alpha blending
framebufferaddr[offset] = 0x00ff0000;
}
{
float t = 0;
BezierData b = {
4,
{{50, 68, 0, 0}, {70, 220, 0, 0}, {80, 40, 0, 0}, {90, 100, 0, 0}}};
while (t < 1) {
V4 v = evcubicbezier(b, t);
int offset = (u32)(v.v[1]) * 1920 + (u32)(v.v[0]);
framebufferaddr[offset] = 0x000000ff;
t += 0.00001;
}
}
{
float t = 0;
BezierData b = {
4,
{{10, 20, 0, 0}, {70, 10, 0, 0}, {80, 40, 0, 0}, {90, 100, 0, 0}}};
while (t < 1) {
V4 v = evcubicbezier(b, t);
int offset = (u32)(v.v[1]) * 1920 + (u32)(v.v[0]);
framebufferaddr[offset] = 0x0000ff00;
t += 0.00001;
}
}
for (;;);
u32* buf = renderglyphs(a);
copyrect(framebufferaddr, buf, 0, 20, 98);
rendertext(framebufferaddr, buf, "Hello World.", 0, 50);
rendertext(framebufferaddr, buf, "Hello World.", 0, 66);
rendertext(framebufferaddr, buf, "This is a test.", 0, 96);
rendertext(framebufferaddr, buf, "Hello World.", 8*20, 82);
rendertext(framebufferaddr, buf, "12 23 45 332", 8*20, 60*16);
}
for (;;) {}
}
