/* raise irq to CPU if necessary. must be called every time the active
irq may change */
static int pic_update_irq(PDEVPIC pThis)
{
PicState *pics = &pThis->aPics[0];
int irq2, irq;
/* first look at slave pic */
irq2 = pic_get_irq(&pics[1]);
Log(("pic_update_irq irq2=%d\n", irq2));
if (irq2 >= 0) {
/* if irq request by slave pic, signal master PIC */
pic_set_irq1(&pics[0], 2, 1);
} else {
/* If not, clear the IR on the master PIC. */
pic_set_irq1(&pics[0], 2, 0);
}
/* look at requested irq */
irq = pic_get_irq(&pics[0]);
if (irq >= 0)
{
/* If irq 2 is pending on the master pic, then there must be one pending on the slave pic too! Otherwise we'll get
* spurious slave interrupts in picGetInterrupt.
*/
if (irq != 2 || irq2 != -1)
{
#if defined(DEBUG_PIC)
int i;
for(i = 0; i < 2; i++) {
Log(("pic%d: imr=%x irr=%x padd=%d\n",
i, pics[i].imr, pics[i].irr,
pics[i].priority_add));
}
Log(("pic: cpu_interrupt\n"));
#endif
pThis->CTX_SUFF(pPicHlp)->pfnSetInterruptFF(pThis->CTX_SUFF(pDevIns));
}
else
{
STAM_COUNTER_INC(&pThis->StatClearedActiveIRQ2);
Log(("pic_update_irq: irq 2 is active, but no interrupt is pending on the slave pic!!\n"));
/* Clear it here, so lower priority interrupts can still be dispatched. */
/* if this was the only pending irq, then we must clear the interrupt ff flag */
pThis->CTX_SUFF(pPicHlp)->pfnClearInterruptFF(pThis->CTX_SUFF(pDevIns));
/** @note Is this correct? */
pics[0].irr &= ~(1 << 2);
/* Call ourselves again just in case other interrupts are pending */
return pic_update_irq(pThis);
}
}
else
{
Log(("pic_update_irq: no interrupt is pending!!\n"));
/* we must clear the interrupt ff flag */
pThis->CTX_SUFF(pPicHlp)->pfnClearInterruptFF(pThis->CTX_SUFF(pDevIns));
}
return VINF_SUCCESS;
}
int pic_read_irq(PicState2 *s)
{
int irq, irq2, intno;
irq = pic_get_irq(&s->pics[0]);
if (irq >= 0) {
pic_intack(&s->pics[0], irq);
#ifndef TARGET_IA64
if (time_drift_fix && irq == 0) {
extern int64_t timer_acks, timer_ints_to_push;
timer_acks++;
if (timer_ints_to_push > 0) {
timer_ints_to_push--;
/* simulate an edge irq0, like the one generated by i8254 */
pic_set_irq1(&s->pics[0], 0, 0);
pic_set_irq1(&s->pics[0], 0, 1);
}
}
#endif
if (irq == 2) {
irq2 = pic_get_irq(&s->pics[1]);
if (irq2 >= 0) {
pic_intack(&s->pics[1], irq2);
} else {
/* spurious IRQ on slave controller */
irq2 = 7;
}
intno = s->pics[1].irq_base + irq2;
#if defined(DEBUG_PIC) || defined(DEBUG_IRQ_LATENCY)
irq = irq2 + 8;
#endif
} else {
intno = s->pics[0].irq_base + irq;
}
} else {
/* spurious IRQ on host controller */
irq = 7;
intno = s->pics[0].irq_base + irq;
}
pic_update_irq(s);
#ifdef DEBUG_IRQ_LATENCY
printf("IRQ%d latency=%0.3fus\n",
irq,
(double)(qemu_get_clock(vm_clock) -
irq_time[irq]) * 1000000.0 / get_ticks_per_sec());
#endif
#if defined(DEBUG_PIC)
printf("pic_interrupt: irq=%d\n", irq);
#endif
return intno;
}
/*
* raise irq to CPU if necessary. must be called every time the active
* irq may change
*/
static void pic_update_irq(struct kvm_pic *s)
{
int irq2, irq;
irq2 = pic_get_irq(&s->pics[1]);
if (irq2 >= 0) {
/*
* if irq request by slave pic, signal master PIC
*/
pic_set_irq1(&s->pics[0], 2, 1);
pic_set_irq1(&s->pics[0], 2, 0);
}
irq = pic_get_irq(&s->pics[0]);
if (irq >= 0)
s->irq_request(s->irq_request_opaque, 1);
else
s->irq_request(s->irq_request_opaque, 0);
}
/* XXX: should not export it, but it is needed for an APIC kludge */
void pic_update_irq(PicState2 *s)
{
int irq2, irq;
/* first look at slave pic */
irq2 = pic_get_irq(&s->pics[1]);
if (irq2 >= 0) {
/* if irq request by slave pic, signal master PIC */
pic_set_irq1(&s->pics[0], 2, 1);
pic_set_irq1(&s->pics[0], 2, 0);
}
/* look at requested irq */
irq = pic_get_irq(&s->pics[0]);
if (irq >= 0) {
#if defined(DEBUG_PIC)
{
int i;
for(i = 0; i < 2; i++) {
printf("pic%d: imr=%x irr=%x padd=%d\n",
i, s->pics[i].imr, s->pics[i].irr,
s->pics[i].priority_add);
}
}
printf("pic: cpu_interrupt\n");
#endif
qemu_irq_raise(s->parent_irq);
}
/* all targets should do this rather than acking the IRQ in the cpu */
/* vova: at least on x86 targets this is required to avoid crashed when
simulation speed is low (for example due to logging enabled */
//#if defined(TARGET_MIPS) || defined(TARGET_PPC) || defined(TARGET_ALPHA)
else {
qemu_irq_lower(s->parent_irq);
}
//#endif
}
/* XXX: should not export it, but it is needed for an APIC kludge */
void pic_update_irq(PicState2 *s)
{
int irq2, irq;
/* first look at slave pic */
irq2 = pic_get_irq(&s->pics[1]);
if (irq2 >= 0) {
/* if irq request by slave pic, signal master PIC */
pic_set_irq1(&s->pics[0], 2, 1);
pic_set_irq1(&s->pics[0], 2, 0);
}
/* look at requested irq */
irq = pic_get_irq(&s->pics[0]);
if (irq >= 0) {
#if defined(DEBUG_PIC)
{
int i;
for(i = 0; i < 2; i++) {
printf("pic%d: imr=%x irr=%x padd=%d\n",
i, s->pics[i].imr, s->pics[i].irr,
s->pics[i].priority_add);
}
}
printf("pic: cpu_interrupt\n");
#endif
qemu_irq_raise(s->parent_irq);
}
/* all targets should do this rather than acking the IRQ in the cpu */
#if defined(TARGET_MIPS) || defined(TARGET_PPC)
else {
qemu_irq_lower(s->parent_irq);
}
#endif
}
