void __init auxio_power_probe(void)
{
struct linux_prom_registers regs;
int node;
struct resource r;
/* Attempt to find the sun4m power control node. */
node = prom_getchild(prom_root_node);
node = prom_searchsiblings(node, "obio");
node = prom_getchild(node);
node = prom_searchsiblings(node, "power");
if (node == 0 || node == -1)
return;
/* Map the power control register. */
if (prom_getproperty(node, "reg", (char *)®s, sizeof(regs)) <= 0)
return;
prom_apply_obio_ranges(®s, 1);
memset(&r, 0, sizeof(r));
r.flags = regs.which_io & 0xF;
r.start = regs.phys_addr;
r.end = regs.phys_addr + regs.reg_size - 1;
auxio_power_register = (unsigned char *) of_ioremap(&r, 0,
regs.reg_size, "auxpower");
/* Display a quick message on the console. */
if (auxio_power_register)
printk(KERN_INFO "Power off control detected.\n");
}
void __init auxio_power_probe(void)
{
struct linux_prom_registers regs;
phandle node;
struct resource r;
node = prom_getchild(prom_root_node);
node = prom_searchsiblings(node, "obio");
node = prom_getchild(node);
node = prom_searchsiblings(node, "power");
if (node == 0 || (s32)node == -1)
return;
if (prom_getproperty(node, "reg", (char *)®s, sizeof(regs)) <= 0)
return;
prom_apply_obio_ranges(®s, 1);
memset(&r, 0, sizeof(r));
r.flags = regs.which_io & 0xF;
r.start = regs.phys_addr;
r.end = regs.phys_addr + regs.reg_size - 1;
auxio_power_register = (unsigned char *) of_ioremap(&r, 0,
regs.reg_size, "auxpower");
if (auxio_power_register)
printk(KERN_INFO "Power off control detected.\n");
}
void __init auxio_probe(void)
{
int node, auxio_nd;
struct linux_prom_registers auxregs[1];
struct resource r;
switch (sparc_cpu_model) {
case sun4d:
case sun4:
auxio_register = 0;
return;
default:
break;
}
node = prom_getchild(prom_root_node);
auxio_nd = prom_searchsiblings(node, "auxiliary-io");
if(!auxio_nd) {
node = prom_searchsiblings(node, "obio");
node = prom_getchild(node);
auxio_nd = prom_searchsiblings(node, "auxio");
if(!auxio_nd) {
#ifdef CONFIG_PCI
/* There may be auxio on Ebus */
auxio_register = 0;
return;
#else
if(prom_searchsiblings(node, "leds")) {
/* VME chassis sun4m machine, no auxio exists. */
auxio_register = 0;
return;
}
prom_printf("Cannot find auxio node, cannot continue...\n");
prom_halt();
#endif
}
}
prom_getproperty(auxio_nd, "reg", (char *) auxregs, sizeof(auxregs));
prom_apply_obio_ranges(auxregs, 0x1);
/* Map the register both read and write */
r.flags = auxregs[0].which_io & 0xF;
r.start = auxregs[0].phys_addr;
r.end = auxregs[0].phys_addr + auxregs[0].reg_size - 1;
auxio_register = (unsigned char *) sbus_ioremap(&r, 0,
auxregs[0].reg_size, "auxio");
/* Fix the address on sun4m and sun4c. */
if((((unsigned long) auxregs[0].phys_addr) & 3) == 3 ||
sparc_cpu_model == sun4c)
auxio_register = (unsigned char *) ((int)auxio_register | 3);
TURN_ON_LED;
}
void __init auxio_probe(void)
{
phandle node, auxio_nd;
struct linux_prom_registers auxregs[1];
struct resource r;
switch (sparc_cpu_model) {
case sparc_leon:
case sun4d:
case sun4:
return;
default:
break;
}
node = prom_getchild(prom_root_node);
auxio_nd = prom_searchsiblings(node, "auxiliary-io");
if(!auxio_nd) {
node = prom_searchsiblings(node, "obio");
node = prom_getchild(node);
auxio_nd = prom_searchsiblings(node, "auxio");
if(!auxio_nd) {
#ifdef CONFIG_PCI
return;
#else
if(prom_searchsiblings(node, "leds")) {
return;
}
prom_printf("Cannot find auxio node, cannot continue...\n");
prom_halt();
#endif
}
}
if(prom_getproperty(auxio_nd, "reg", (char *) auxregs, sizeof(auxregs)) <= 0)
return;
prom_apply_obio_ranges(auxregs, 0x1);
r.flags = auxregs[0].which_io & 0xF;
r.start = auxregs[0].phys_addr;
r.end = auxregs[0].phys_addr + auxregs[0].reg_size - 1;
auxio_register = of_ioremap(&r, 0, auxregs[0].reg_size, "auxio");
if((((unsigned long) auxregs[0].phys_addr) & 3) == 3 ||
sparc_cpu_model == sun4c)
auxio_register += (3 - ((unsigned long)auxio_register & 3));
set_auxio(AUXIO_LED, 0);
}
__initfunc(void auxio_power_probe(void))
{
struct linux_prom_registers regs;
int node;
/* Attempt to find the sun4m power control node. */
node = prom_getchild(prom_root_node);
node = prom_searchsiblings(node, "obio");
node = prom_getchild(node);
node = prom_searchsiblings(node, "power");
if (node == 0 || node == -1)
return;
/* Map the power control register. */
prom_getproperty(node, "reg", (char *)®s, sizeof(regs));
prom_apply_obio_ranges(®s, 1);
auxio_power_register = (volatile unsigned char *)
sparc_alloc_io(regs.phys_addr, 0, regs.reg_size,
"power off control", regs.which_io, 0);
/* Display a quick message on the console. */
if (auxio_power_register)
printk(KERN_INFO "Power off control detected.\n");
}
/* Probe for the mostek real time clock chip. */
static __inline__ void clock_probe(void)
{
struct linux_prom_registers clk_reg[2];
char model[128];
register int node, cpuunit, bootbus;
struct resource r;
cpuunit = bootbus = 0;
memset(&r, 0, sizeof(r));
/* Determine the correct starting PROM node for the probe. */
node = prom_getchild(prom_root_node);
switch (sparc_cpu_model) {
case sun4c:
break;
case sun4m:
node = prom_getchild(prom_searchsiblings(node, "obio"));
break;
case sun4d:
node = prom_getchild(bootbus = prom_searchsiblings(prom_getchild(cpuunit = prom_searchsiblings(node, "cpu-unit")), "bootbus"));
break;
default:
prom_printf("CLOCK: Unsupported architecture!\n");
prom_halt();
}
/* Find the PROM node describing the real time clock. */
sp_clock_typ = MSTK_INVALID;
node = prom_searchsiblings(node,"eeprom");
if (!node) {
prom_printf("CLOCK: No clock found!\n");
prom_halt();
}
/* Get the model name and setup everything up. */
model[0] = '\0';
prom_getstring(node, "model", model, sizeof(model));
if (strcmp(model, "mk48t02") == 0) {
sp_clock_typ = MSTK48T02;
if (prom_getproperty(node, "reg", (char *) clk_reg, sizeof(clk_reg)) == -1) {
prom_printf("clock_probe: FAILED!\n");
prom_halt();
}
if (sparc_cpu_model == sun4d)
prom_apply_generic_ranges (bootbus, cpuunit, clk_reg, 1);
else
prom_apply_obio_ranges(clk_reg, 1);
/* Map the clock register io area read-only */
r.flags = clk_reg[0].which_io;
r.start = clk_reg[0].phys_addr;
mstk48t02_regs = sbus_ioremap(&r, 0,
sizeof(struct mostek48t02), "mk48t02");
mstk48t08_regs = NULL; /* To catch weirdness */
} else if (strcmp(model, "mk48t08") == 0) {
sp_clock_typ = MSTK48T08;
if(prom_getproperty(node, "reg", (char *) clk_reg,
sizeof(clk_reg)) == -1) {
prom_printf("clock_probe: FAILED!\n");
prom_halt();
}
if (sparc_cpu_model == sun4d)
prom_apply_generic_ranges (bootbus, cpuunit, clk_reg, 1);
else
prom_apply_obio_ranges(clk_reg, 1);
/* Map the clock register io area read-only */
/* XXX r/o attribute is somewhere in r.flags */
r.flags = clk_reg[0].which_io;
r.start = clk_reg[0].phys_addr;
mstk48t08_regs = (struct mostek48t08 *) sbus_ioremap(&r, 0,
sizeof(struct mostek48t08), "mk48t08");
mstk48t02_regs = &mstk48t08_regs->regs;
} else {
prom_printf("CLOCK: Unknown model name '%s'\n",model);
prom_halt();
}
/* Report a low battery voltage condition. */
if (has_low_battery())
printk(KERN_CRIT "NVRAM: Low battery voltage!\n");
/* Kick start the clock if it is completely stopped. */
if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP)
kick_start_clock();
}
void __init sun4m_init_IRQ(void)
{
int ie_node,i;
struct linux_prom_registers int_regs[PROMREG_MAX];
int num_regs;
struct resource r;
int mid;
local_irq_disable();
if((ie_node = prom_searchsiblings(prom_getchild(prom_root_node), "obio")) == 0 ||
(ie_node = prom_getchild (ie_node)) == 0 ||
(ie_node = prom_searchsiblings (ie_node, "interrupt")) == 0) {
prom_printf("Cannot find /obio/interrupt node\n");
prom_halt();
}
num_regs = prom_getproperty(ie_node, "reg", (char *) int_regs,
sizeof(int_regs));
num_regs = (num_regs/sizeof(struct linux_prom_registers));
/* Apply the obio ranges to these registers. */
prom_apply_obio_ranges(int_regs, num_regs);
int_regs[4].phys_addr = int_regs[num_regs-1].phys_addr;
int_regs[4].reg_size = int_regs[num_regs-1].reg_size;
int_regs[4].which_io = int_regs[num_regs-1].which_io;
for(ie_node = 1; ie_node < 4; ie_node++) {
int_regs[ie_node].phys_addr = int_regs[ie_node-1].phys_addr + PAGE_SIZE;
int_regs[ie_node].reg_size = int_regs[ie_node-1].reg_size;
int_regs[ie_node].which_io = int_regs[ie_node-1].which_io;
}
memset((char *)&r, 0, sizeof(struct resource));
/* Map the interrupt registers for all possible cpus. */
r.flags = int_regs[0].which_io;
r.start = int_regs[0].phys_addr;
sun4m_interrupts = (struct sun4m_intregs *) sbus_ioremap(&r, 0,
PAGE_SIZE*SUN4M_NCPUS, "interrupts_percpu");
/* Map the system interrupt control registers. */
r.flags = int_regs[4].which_io;
r.start = int_regs[4].phys_addr;
sbus_ioremap(&r, 0, int_regs[4].reg_size, "interrupts_system");
sun4m_interrupts->set = ~SUN4M_INT_MASKALL;
for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
sun4m_interrupts->cpu_intregs[mid].clear = ~0x17fff;
if (!cpu_find_by_instance(1, NULL, NULL)) {
/* system wide interrupts go to cpu 0, this should always
* be safe because it is guaranteed to be fitted or OBP doesn't
* come up
*
* Not sure, but writing here on SLAVIO systems may puke
* so I don't do it unless there is more than 1 cpu.
*/
irq_rcvreg = (unsigned long *)
&sun4m_interrupts->undirected_target;
sun4m_interrupts->undirected_target = 0;
}
BTFIXUPSET_CALL(sbint_to_irq, sun4m_sbint_to_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(enable_irq, sun4m_enable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(disable_irq, sun4m_disable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(enable_pil_irq, sun4m_enable_pil_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(disable_pil_irq, sun4m_disable_pil_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_profile_irq, sun4m_clear_profile_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM);
sparc_init_timers = sun4m_init_timers;
#ifdef CONFIG_SMP
BTFIXUPSET_CALL(set_cpu_int, sun4m_send_ipi, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_cpu_int, sun4m_clear_ipi, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(set_irq_udt, sun4m_set_udt, BTFIXUPCALL_NORM);
#endif
/* Cannot enable interrupts until OBP ticker is disabled. */
}
static void __init sun4m_init_timers(irqreturn_t (*counter_fn)(int, void *, struct pt_regs *))
{
int reg_count, irq, cpu;
struct linux_prom_registers cnt_regs[PROMREG_MAX];
int obio_node, cnt_node;
struct resource r;
cnt_node = 0;
if((obio_node =
prom_searchsiblings (prom_getchild(prom_root_node), "obio")) == 0 ||
(obio_node = prom_getchild (obio_node)) == 0 ||
(cnt_node = prom_searchsiblings (obio_node, "counter")) == 0) {
prom_printf("Cannot find /obio/counter node\n");
prom_halt();
}
reg_count = prom_getproperty(cnt_node, "reg",
(void *) cnt_regs, sizeof(cnt_regs));
reg_count = (reg_count/sizeof(struct linux_prom_registers));
/* Apply the obio ranges to the timer registers. */
prom_apply_obio_ranges(cnt_regs, reg_count);
cnt_regs[4].phys_addr = cnt_regs[reg_count-1].phys_addr;
cnt_regs[4].reg_size = cnt_regs[reg_count-1].reg_size;
cnt_regs[4].which_io = cnt_regs[reg_count-1].which_io;
for(obio_node = 1; obio_node < 4; obio_node++) {
cnt_regs[obio_node].phys_addr =
cnt_regs[obio_node-1].phys_addr + PAGE_SIZE;
cnt_regs[obio_node].reg_size = cnt_regs[obio_node-1].reg_size;
cnt_regs[obio_node].which_io = cnt_regs[obio_node-1].which_io;
}
memset((char*)&r, 0, sizeof(struct resource));
/* Map the per-cpu Counter registers. */
r.flags = cnt_regs[0].which_io;
r.start = cnt_regs[0].phys_addr;
sun4m_timers = (struct sun4m_timer_regs *) sbus_ioremap(&r, 0,
PAGE_SIZE*SUN4M_NCPUS, "sun4m_cpu_cnt");
/* Map the system Counter register. */
/* XXX Here we expect consequent calls to yeld adjusent maps. */
r.flags = cnt_regs[4].which_io;
r.start = cnt_regs[4].phys_addr;
sbus_ioremap(&r, 0, cnt_regs[4].reg_size, "sun4m_sys_cnt");
sun4m_timers->l10_timer_limit = (((1000000/HZ) + 1) << 10);
master_l10_counter = &sun4m_timers->l10_cur_count;
master_l10_limit = &sun4m_timers->l10_timer_limit;
irq = request_irq(TIMER_IRQ,
counter_fn,
(IRQF_DISABLED | SA_STATIC_ALLOC),
"timer", NULL);
if (irq) {
prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
prom_halt();
}
if (!cpu_find_by_instance(1, NULL, NULL)) {
for(cpu = 0; cpu < 4; cpu++)
sun4m_timers->cpu_timers[cpu].l14_timer_limit = 0;
sun4m_interrupts->set = SUN4M_INT_E14;
} else {
sun4m_timers->cpu_timers[0].l14_timer_limit = 0;
}
#ifdef CONFIG_SMP
{
unsigned long flags;
extern unsigned long lvl14_save[4];
struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
/* For SMP we use the level 14 ticker, however the bootup code
* has copied the firmwares level 14 vector into boot cpu's
* trap table, we must fix this now or we get squashed.
*/
local_irq_save(flags);
trap_table->inst_one = lvl14_save[0];
trap_table->inst_two = lvl14_save[1];
trap_table->inst_three = lvl14_save[2];
trap_table->inst_four = lvl14_save[3];
local_flush_cache_all();
local_irq_restore(flags);
}
#endif
}
__initfunc(static void sun4m_init_timers(void (*counter_fn)(int, void *, struct pt_regs *)))
{
int reg_count, irq, cpu;
struct linux_prom_registers cnt_regs[PROMREG_MAX];
int obio_node, cnt_node;
cnt_node = 0;
if((obio_node =
prom_searchsiblings (prom_getchild(prom_root_node), "obio")) == 0 ||
(obio_node = prom_getchild (obio_node)) == 0 ||
(cnt_node = prom_searchsiblings (obio_node, "counter")) == 0) {
prom_printf("Cannot find /obio/counter node\n");
prom_halt();
}
reg_count = prom_getproperty(cnt_node, "reg",
(void *) cnt_regs, sizeof(cnt_regs));
reg_count = (reg_count/sizeof(struct linux_prom_registers));
/* Apply the obio ranges to the timer registers. */
prom_apply_obio_ranges(cnt_regs, reg_count);
cnt_regs[4].phys_addr = cnt_regs[reg_count-1].phys_addr;
cnt_regs[4].reg_size = cnt_regs[reg_count-1].reg_size;
cnt_regs[4].which_io = cnt_regs[reg_count-1].which_io;
for(obio_node = 1; obio_node < 4; obio_node++) {
cnt_regs[obio_node].phys_addr =
cnt_regs[obio_node-1].phys_addr + PAGE_SIZE;
cnt_regs[obio_node].reg_size = cnt_regs[obio_node-1].reg_size;
cnt_regs[obio_node].which_io = cnt_regs[obio_node-1].which_io;
}
/* Map the per-cpu Counter registers. */
sun4m_timers = sparc_alloc_io(cnt_regs[0].phys_addr, 0,
PAGE_SIZE*NCPUS, "counters_percpu",
cnt_regs[0].which_io, 0x0);
/* Map the system Counter register. */
sparc_alloc_io(cnt_regs[4].phys_addr, 0,
cnt_regs[4].reg_size,
"counters_system",
cnt_regs[4].which_io, 0x0);
sun4m_timers->l10_timer_limit = (((1000000/HZ) + 1) << 10);
master_l10_counter = &sun4m_timers->l10_cur_count;
master_l10_limit = &sun4m_timers->l10_timer_limit;
irq = request_irq(TIMER_IRQ,
counter_fn,
(SA_INTERRUPT | SA_STATIC_ALLOC),
"timer", NULL);
if (irq) {
prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
prom_halt();
}
if(linux_num_cpus > 1) {
for(cpu = 0; cpu < 4; cpu++)
sun4m_timers->cpu_timers[cpu].l14_timer_limit = 0;
sun4m_interrupts->set = SUN4M_INT_E14;
} else {
sun4m_timers->cpu_timers[0].l14_timer_limit = 0;
}
#ifdef __SMP__
{
unsigned long flags;
extern unsigned long lvl14_save[4];
struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
/* For SMP we use the level 14 ticker, however the bootup code
* has copied the firmwares level 14 vector into boot cpu's
* trap table, we must fix this now or we get squashed.
*/
__save_and_cli(flags);
trap_table->inst_one = lvl14_save[0];
trap_table->inst_two = lvl14_save[1];
trap_table->inst_three = lvl14_save[2];
trap_table->inst_four = lvl14_save[3];
local_flush_cache_all();
__restore_flags(flags);
}
#endif
}