static void z2_init(QEMUMachineInitArgs *args)
{
const char *cpu_model = args->cpu_model;
const char *kernel_filename = args->kernel_filename;
const char *kernel_cmdline = args->kernel_cmdline;
const char *initrd_filename = args->initrd_filename;
MemoryRegion *address_space_mem = get_system_memory();
uint32_t sector_len = 0x10000;
PXA2xxState *mpu;
DriveInfo *dinfo;
int be;
void *z2_lcd;
i2c_bus *bus;
DeviceState *wm;
if (!cpu_model) {
cpu_model = "pxa270-c5";
}
/* Setup CPU & memory */
mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, cpu_model);
#ifdef TARGET_WORDS_BIGENDIAN
be = 1;
#else
be = 0;
#endif
dinfo = drive_get(IF_PFLASH, 0, 0);
if (!dinfo) {
fprintf(stderr, "Flash image must be given with the "
"'pflash' parameter\n");
exit(1);
}
if (!pflash_cfi01_register(Z2_FLASH_BASE,
NULL, "z2.flash0", Z2_FLASH_SIZE,
dinfo->bdrv, sector_len,
Z2_FLASH_SIZE / sector_len, 4, 0, 0, 0, 0,
be)) {
fprintf(stderr, "qemu: Error registering flash memory.\n");
exit(1);
}
/* setup keypad */
pxa27x_register_keypad(mpu->kp, map, 0x100);
/* MMC/SD host */
pxa2xx_mmci_handlers(mpu->mmc,
NULL,
qdev_get_gpio_in(mpu->gpio, Z2_GPIO_SD_DETECT));
type_register_static(&zipit_lcd_info);
type_register_static(&aer915_info);
z2_lcd = ssi_create_slave(mpu->ssp[1], "zipit-lcd");
bus = pxa2xx_i2c_bus(mpu->i2c[0]);
i2c_create_slave(bus, "aer915", 0x55);
wm = i2c_create_slave(bus, "wm8750", 0x1b);
mpu->i2s->opaque = wm;
mpu->i2s->codec_out = wm8750_dac_dat;
mpu->i2s->codec_in = wm8750_adc_dat;
wm8750_data_req_set(wm, mpu->i2s->data_req, mpu->i2s);
qdev_connect_gpio_out(mpu->gpio, Z2_GPIO_LCD_CS,
qemu_allocate_irqs(z2_lcd_cs, z2_lcd, 1)[0]);
if (kernel_filename) {
z2_binfo.kernel_filename = kernel_filename;
z2_binfo.kernel_cmdline = kernel_cmdline;
z2_binfo.initrd_filename = initrd_filename;
z2_binfo.board_id = 0x6dd;
arm_load_kernel(mpu->cpu, &z2_binfo);
}
}
static void z2_init(MachineState *machine)
{
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
MemoryRegion *address_space_mem = get_system_memory();
uint32_t sector_len = 0x10000;
PXA2xxState *mpu;
DriveInfo *dinfo;
int be;
void *z2_lcd;
I2CBus *bus;
DeviceState *wm;
/* Setup CPU & memory */
mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, machine->cpu_type);
#ifdef TARGET_WORDS_BIGENDIAN
be = 1;
#else
be = 0;
#endif
dinfo = drive_get(IF_PFLASH, 0, 0);
if (!dinfo && !qtest_enabled()) {
error_report("Flash image must be given with the "
"'pflash' parameter");
exit(1);
}
if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
sector_len, 4, 0, 0, 0, 0, be)) {
error_report("Error registering flash memory");
exit(1);
}
/* setup keypad */
pxa27x_register_keypad(mpu->kp, map, 0x100);
/* MMC/SD host */
pxa2xx_mmci_handlers(mpu->mmc,
NULL,
qdev_get_gpio_in(mpu->gpio, Z2_GPIO_SD_DETECT));
type_register_static(&zipit_lcd_info);
type_register_static(&aer915_info);
z2_lcd = ssi_create_slave(mpu->ssp[1], "zipit-lcd");
bus = pxa2xx_i2c_bus(mpu->i2c[0]);
i2c_create_slave(bus, TYPE_AER915, 0x55);
wm = i2c_create_slave(bus, TYPE_WM8750, 0x1b);
mpu->i2s->opaque = wm;
mpu->i2s->codec_out = wm8750_dac_dat;
mpu->i2s->codec_in = wm8750_adc_dat;
wm8750_data_req_set(wm, mpu->i2s->data_req, mpu->i2s);
qdev_connect_gpio_out(mpu->gpio, Z2_GPIO_LCD_CS,
qemu_allocate_irq(z2_lcd_cs, z2_lcd, 0));
z2_binfo.kernel_filename = kernel_filename;
z2_binfo.kernel_cmdline = kernel_cmdline;
z2_binfo.initrd_filename = initrd_filename;
z2_binfo.board_id = 0x6dd;
arm_load_kernel(mpu->cpu, &z2_binfo);
}
