C++ (Cpp) pxa2xx_transceiver_mode示例

示例#1

文件： tosa.c 项目： caglar10ur/linux-2.6.27.y

/*
 * Irda
 */
static void tosa_irda_transceiver_mode(struct device *dev, int mode)
{
	if (mode & IR_OFF) {
		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
		pxa2xx_transceiver_mode(dev, mode);
		gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
	} else {
		pxa2xx_transceiver_mode(dev, mode);
		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
	}
}

示例#2

文件： poodle.c 项目： 8497165/JetKernel

/*
 * Irda
 */
static void poodle_irda_transceiver_mode(struct device *dev, int mode)
{
	if (mode & IR_OFF) {
		GPSR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
	} else {
		GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
	}
	pxa2xx_transceiver_mode(dev, mode);
}

示例#3

文件： pxaficp_ir.c 项目： andi34/Dhollmen_Kernel

/*
 * Set the IrDA communications mode.
 */
static void pxa_irda_set_mode(struct pxa_irda *si, int mode)
{
	if (si->pdata->transceiver_mode)
		si->pdata->transceiver_mode(si->dev, mode);
	else {
		if (gpio_is_valid(si->pdata->gpio_pwdown))
			gpio_set_value(si->pdata->gpio_pwdown,
					!(mode & IR_OFF) ^
					!si->pdata->gpio_pwdown_inverted);
		pxa2xx_transceiver_mode(si->dev, mode);
	}
}

示例#4

static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
{
	unsigned long flags;

	local_irq_save(flags);
	if (mode & IR_SIRMODE) {
		LUB_MISC_WR &= ~(1 << 4);
	} else if (mode & IR_FIRMODE) {
		LUB_MISC_WR |= 1 << 4;
	}
	pxa2xx_transceiver_mode(dev, mode);
	local_irq_restore(flags);
}

示例#5

文件： mainstone.c 项目： abgoyal/OpenX2-kernel-original

static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
{
	unsigned long flags;

	local_irq_save(flags);
	if (mode & IR_SIRMODE) {
		MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
	} else if (mode & IR_FIRMODE) {
		MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
	}
	pxa2xx_transceiver_mode(dev, mode);
	if (mode & IR_OFF) {
		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
	} else {
		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
	}
	local_irq_restore(flags);
}

示例#6

文件： trizeps4.c 项目： artynet/linux-3.3.8

static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
{
	unsigned long flags;

	local_irq_save(flags);
	/* Switch mode */
	if (mode & IR_SIRMODE)
		trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;	/* Slow mode */
	else if (mode & IR_FIRMODE)
		trizeps_conxs_ircr |= ConXS_IRCR_MODE;	/* Fast mode */

	/* Switch power */
	if (mode & IR_OFF)
		trizeps_conxs_ircr |= ConXS_IRCR_SD;
	else
		trizeps_conxs_ircr &= ~ConXS_IRCR_SD;

	IRCR_writew(trizeps_conxs_ircr);
	local_irq_restore(flags);

	pxa2xx_transceiver_mode(dev, mode);
}

示例#7

文件： magician.c 项目： 8497165/JetKernel

static void magician_irda_transceiver_mode(struct device *dev, int mode)
{
	gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
	pxa2xx_transceiver_mode(dev, mode);
}

示例#8

文件： spitz.c 项目： 10x-Amin/nAa-kernel

static void akita_irda_transceiver_mode(struct device *dev, int mode)
{
	gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF);
	pxa2xx_transceiver_mode(dev, mode);
}

示例#9

文件： spitz.c 项目： 10x-Amin/nAa-kernel

static void spitz_irda_transceiver_mode(struct device *dev, int mode)
{
	gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF);
	pxa2xx_transceiver_mode(dev, mode);
}

示例#10

文件： treo680.c 项目： Herysutrisno/mpc5200

/******************************************************************************
 * IrDA
 ******************************************************************************/
static void treo680_transceiver_mode(struct device *dev, int mode)
{
	gpio_set_value(GPIO_NR_TREO680_IR_EN, mode & IR_OFF);
	pxa2xx_transceiver_mode(dev, mode);
}

示例#11

文件： palmte2.c 项目： Indigenous/linux-2.6

static void palmte2_irda_transceiver_mode(struct device *dev, int mode)
{
	gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF);
	pxa2xx_transceiver_mode(dev, mode);
}