示例#1
0
static void test_callback(void)
{
    CallbackTestData data;
    QemuThread thread;
    int ret;
    char c;

    rfifolock_init(&data.lock, rfifolock_cb, &data);
    ret = qemu_pipe(data.fd);
    g_assert(ret == 0);

    /* Hold lock but allow the callback to kick us by writing to the pipe */
    rfifolock_lock(&data.lock);
    qemu_thread_create(&thread, "callback_thread",
                       callback_thread, &data, QEMU_THREAD_JOINABLE);
    ret = read(data.fd[0], &c, sizeof(c));
    g_assert(ret == 1);
    rfifolock_unlock(&data.lock);
    /* If we got here then the callback was invoked, as expected */

    qemu_thread_join(&thread);
    close(data.fd[0]);
    close(data.fd[1]);
    rfifolock_destroy(&data.lock);
}
示例#2
0
static int qemu_gluster_open(BlockDriverState *bs, const char *filename,
    QDict *options, int bdrv_flags)
{
    BDRVGlusterState *s = bs->opaque;
    int open_flags = O_BINARY;
    int ret = 0;
    GlusterConf *gconf = g_malloc0(sizeof(GlusterConf));

    s->glfs = qemu_gluster_init(gconf, filename);
    if (!s->glfs) {
        ret = -errno;
        goto out;
    }

    if (bdrv_flags & BDRV_O_RDWR) {
        open_flags |= O_RDWR;
    } else {
        open_flags |= O_RDONLY;
    }

    if ((bdrv_flags & BDRV_O_NOCACHE)) {
        open_flags |= O_DIRECT;
    }

    s->fd = glfs_open(s->glfs, gconf->image, open_flags);
    if (!s->fd) {
        ret = -errno;
        goto out;
    }

    ret = qemu_pipe(s->fds);
    if (ret < 0) {
        ret = -errno;
        goto out;
    }
    fcntl(s->fds[GLUSTER_FD_READ], F_SETFL, O_NONBLOCK);
    qemu_aio_set_fd_handler(s->fds[GLUSTER_FD_READ],
        qemu_gluster_aio_event_reader, NULL, qemu_gluster_aio_flush_cb, s);

out:
    qemu_gluster_gconf_free(gconf);
    if (!ret) {
        return ret;
    }
    if (s->fd) {
        glfs_close(s->fd);
    }
    if (s->glfs) {
        glfs_fini(s->glfs);
    }
    return ret;
}
示例#3
0
int event_notifier_init(EventNotifier *e, int active)
{
    int fds[2];
    int ret;

#ifdef CONFIG_EVENTFD
    ret = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
#else
    ret = -1;
    errno = ENOSYS;
#endif
    if (ret >= 0) {
        e->rfd = e->wfd = ret;
    } else {
        if (errno != ENOSYS) {
            return -errno;
        }
        if (qemu_pipe(fds) < 0) {
            return -errno;
        }
        ret = fcntl_setfl(fds[0], O_NONBLOCK);
        if (ret < 0) {
            ret = -errno;
            goto fail;
        }
        ret = fcntl_setfl(fds[1], O_NONBLOCK);
        if (ret < 0) {
            ret = -errno;
            goto fail;
        }
        e->rfd = fds[0];
        e->wfd = fds[1];
    }
    if (active) {
        event_notifier_set(e);
    }
    return 0;

fail:
    close(fds[0]);
    close(fds[1]);
    return ret;
}
/*
 * Creates an eventfd that looks like a pipe and has EFD_CLOEXEC set.
 */
int qemu_eventfd(int fds[2])
{
#ifdef CONFIG_EVENTFD
    int ret;

    ret = eventfd(0, 0);
    if (ret >= 0) {
        fds[0] = ret;
        qemu_set_cloexec(ret);
        if ((fds[1] = dup(ret)) == -1) {
            close(ret);
            return -1;
        }
        qemu_set_cloexec(fds[1]);
        return 0;
    }

    if (errno != ENOSYS) {
        return -1;
    }
#endif

    return qemu_pipe(fds);
}
示例#5
0
static int qemu_rbd_open(BlockDriverState *bs, const char *filename, int flags)
{
    BDRVRBDState *s = bs->opaque;
    char pool[RBD_MAX_POOL_NAME_SIZE];
    char snap_buf[RBD_MAX_SNAP_NAME_SIZE];
    char conf[RBD_MAX_CONF_SIZE];
    char clientname_buf[RBD_MAX_CONF_SIZE];
    char *clientname;
    int r;

    if (qemu_rbd_parsename(filename, pool, sizeof(pool),
                           snap_buf, sizeof(snap_buf),
                           s->name, sizeof(s->name),
                           conf, sizeof(conf)) < 0) {
        return -EINVAL;
    }

    clientname = qemu_rbd_parse_clientname(conf, clientname_buf);
    r = rados_create(&s->cluster, clientname);
    if (r < 0) {
        error_report("error initializing");
        return r;
    }

    s->snap = NULL;
    if (snap_buf[0] != '\0') {
        s->snap = g_strdup(snap_buf);
    }

    /*
     * Fallback to more conservative semantics if setting cache
     * options fails. Ignore errors from setting rbd_cache because the
     * only possible error is that the option does not exist, and
     * librbd defaults to no caching. If write through caching cannot
     * be set up, fall back to no caching.
     */
    if (flags & BDRV_O_NOCACHE) {
        rados_conf_set(s->cluster, "rbd_cache", "false");
    } else {
        rados_conf_set(s->cluster, "rbd_cache", "true");
    }

    if (strstr(conf, "conf=") == NULL) {
        /* try default location, but ignore failure */
        rados_conf_read_file(s->cluster, NULL);
    }

    if (conf[0] != '\0') {
        r = qemu_rbd_set_conf(s->cluster, conf);
        if (r < 0) {
            error_report("error setting config options");
            goto failed_shutdown;
        }
    }

    r = rados_connect(s->cluster);
    if (r < 0) {
        error_report("error connecting");
        goto failed_shutdown;
    }

    r = rados_ioctx_create(s->cluster, pool, &s->io_ctx);
    if (r < 0) {
        error_report("error opening pool %s", pool);
        goto failed_shutdown;
    }

    r = rbd_open(s->io_ctx, s->name, &s->image, s->snap);
    if (r < 0) {
        error_report("error reading header from %s", s->name);
        goto failed_open;
    }

    bs->read_only = (s->snap != NULL);

    s->event_reader_pos = 0;
    r = qemu_pipe(s->fds);
    if (r < 0) {
        error_report("error opening eventfd");
        goto failed;
    }
    fcntl(s->fds[0], F_SETFL, O_NONBLOCK);
    fcntl(s->fds[1], F_SETFL, O_NONBLOCK);
    qemu_aio_set_fd_handler(s->fds[RBD_FD_READ], qemu_rbd_aio_event_reader,
                            NULL, qemu_rbd_aio_flush_cb, s);


    return 0;

failed:
    rbd_close(s->image);
failed_open:
    rados_ioctx_destroy(s->io_ctx);
failed_shutdown:
    rados_shutdown(s->cluster);
    g_free(s->snap);
    return r;
}
示例#6
0
int main(int argc, char **argv)
{
    BlockBackend *blk;
    BlockDriverState *bs;
    off_t dev_offset = 0;
    uint16_t nbdflags = 0;
    bool disconnect = false;
    const char *bindto = NULL;
    const char *port = NULL;
    char *sockpath = NULL;
    char *device = NULL;
    off_t fd_size;
    QemuOpts *sn_opts = NULL;
    const char *sn_id_or_name = NULL;
    const char *sopt = "hVb:o:p:rsnP:c:dvk:e:f:tl:x:T:D:";
    struct option lopt[] = {
        { "help", no_argument, NULL, 'h' },
        { "version", no_argument, NULL, 'V' },
        { "bind", required_argument, NULL, 'b' },
        { "port", required_argument, NULL, 'p' },
        { "socket", required_argument, NULL, 'k' },
        { "offset", required_argument, NULL, 'o' },
        { "read-only", no_argument, NULL, 'r' },
        { "partition", required_argument, NULL, 'P' },
        { "connect", required_argument, NULL, 'c' },
        { "disconnect", no_argument, NULL, 'd' },
        { "snapshot", no_argument, NULL, 's' },
        { "load-snapshot", required_argument, NULL, 'l' },
        { "nocache", no_argument, NULL, 'n' },
        { "cache", required_argument, NULL, QEMU_NBD_OPT_CACHE },
        { "aio", required_argument, NULL, QEMU_NBD_OPT_AIO },
        { "discard", required_argument, NULL, QEMU_NBD_OPT_DISCARD },
        { "detect-zeroes", required_argument, NULL,
          QEMU_NBD_OPT_DETECT_ZEROES },
        { "shared", required_argument, NULL, 'e' },
        { "format", required_argument, NULL, 'f' },
        { "persistent", no_argument, NULL, 't' },
        { "verbose", no_argument, NULL, 'v' },
        { "object", required_argument, NULL, QEMU_NBD_OPT_OBJECT },
        { "export-name", required_argument, NULL, 'x' },
        { "description", required_argument, NULL, 'D' },
        { "tls-creds", required_argument, NULL, QEMU_NBD_OPT_TLSCREDS },
        { "image-opts", no_argument, NULL, QEMU_NBD_OPT_IMAGE_OPTS },
        { "trace", required_argument, NULL, 'T' },
        { "fork", no_argument, NULL, QEMU_NBD_OPT_FORK },
        { NULL, 0, NULL, 0 }
    };
    int ch;
    int opt_ind = 0;
    char *end;
    int flags = BDRV_O_RDWR;
    int partition = -1;
    int ret = 0;
    bool seen_cache = false;
    bool seen_discard = false;
    bool seen_aio = false;
    pthread_t client_thread;
    const char *fmt = NULL;
    Error *local_err = NULL;
    BlockdevDetectZeroesOptions detect_zeroes = BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF;
    QDict *options = NULL;
    const char *export_name = NULL;
    const char *export_description = NULL;
    const char *tlscredsid = NULL;
    bool imageOpts = false;
    bool writethrough = true;
    char *trace_file = NULL;
    bool fork_process = false;
    int old_stderr = -1;
    unsigned socket_activation;

    /* The client thread uses SIGTERM to interrupt the server.  A signal
     * handler ensures that "qemu-nbd -v -c" exits with a nice status code.
     */
    struct sigaction sa_sigterm;
    memset(&sa_sigterm, 0, sizeof(sa_sigterm));
    sa_sigterm.sa_handler = termsig_handler;
    sigaction(SIGTERM, &sa_sigterm, NULL);

#ifdef CONFIG_POSIX
    signal(SIGPIPE, SIG_IGN);
#endif

    module_call_init(MODULE_INIT_TRACE);
    qcrypto_init(&error_fatal);

    module_call_init(MODULE_INIT_QOM);
    qemu_add_opts(&qemu_object_opts);
    qemu_add_opts(&qemu_trace_opts);
    qemu_init_exec_dir(argv[0]);

    while ((ch = getopt_long(argc, argv, sopt, lopt, &opt_ind)) != -1) {
        switch (ch) {
        case 's':
            flags |= BDRV_O_SNAPSHOT;
            break;
        case 'n':
            optarg = (char *) "none";
            /* fallthrough */
        case QEMU_NBD_OPT_CACHE:
            if (seen_cache) {
                error_report("-n and --cache can only be specified once");
                exit(EXIT_FAILURE);
            }
            seen_cache = true;
            if (bdrv_parse_cache_mode(optarg, &flags, &writethrough) == -1) {
                error_report("Invalid cache mode `%s'", optarg);
                exit(EXIT_FAILURE);
            }
            break;
        case QEMU_NBD_OPT_AIO:
            if (seen_aio) {
                error_report("--aio can only be specified once");
                exit(EXIT_FAILURE);
            }
            seen_aio = true;
            if (!strcmp(optarg, "native")) {
                flags |= BDRV_O_NATIVE_AIO;
            } else if (!strcmp(optarg, "threads")) {
                /* this is the default */
            } else {
               error_report("invalid aio mode `%s'", optarg);
               exit(EXIT_FAILURE);
            }
            break;
        case QEMU_NBD_OPT_DISCARD:
            if (seen_discard) {
                error_report("--discard can only be specified once");
                exit(EXIT_FAILURE);
            }
            seen_discard = true;
            if (bdrv_parse_discard_flags(optarg, &flags) == -1) {
                error_report("Invalid discard mode `%s'", optarg);
                exit(EXIT_FAILURE);
            }
            break;
        case QEMU_NBD_OPT_DETECT_ZEROES:
            detect_zeroes =
                qapi_enum_parse(BlockdevDetectZeroesOptions_lookup,
                                optarg,
                                BLOCKDEV_DETECT_ZEROES_OPTIONS__MAX,
                                BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF,
                                &local_err);
            if (local_err) {
                error_reportf_err(local_err,
                                  "Failed to parse detect_zeroes mode: ");
                exit(EXIT_FAILURE);
            }
            if (detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP &&
                !(flags & BDRV_O_UNMAP)) {
                error_report("setting detect-zeroes to unmap is not allowed "
                             "without setting discard operation to unmap");
                exit(EXIT_FAILURE);
            }
            break;
        case 'b':
            bindto = optarg;
            break;
        case 'p':
            port = optarg;
            break;
        case 'o':
                dev_offset = strtoll (optarg, &end, 0);
            if (*end) {
                error_report("Invalid offset `%s'", optarg);
                exit(EXIT_FAILURE);
            }
            if (dev_offset < 0) {
                error_report("Offset must be positive `%s'", optarg);
                exit(EXIT_FAILURE);
            }
            break;
        case 'l':
            if (strstart(optarg, SNAPSHOT_OPT_BASE, NULL)) {
                sn_opts = qemu_opts_parse_noisily(&internal_snapshot_opts,
                                                  optarg, false);
                if (!sn_opts) {
                    error_report("Failed in parsing snapshot param `%s'",
                                 optarg);
                    exit(EXIT_FAILURE);
                }
            } else {
                sn_id_or_name = optarg;
            }
            /* fall through */
        case 'r':
            nbdflags |= NBD_FLAG_READ_ONLY;
            flags &= ~BDRV_O_RDWR;
            break;
        case 'P':
            partition = strtol(optarg, &end, 0);
            if (*end) {
                error_report("Invalid partition `%s'", optarg);
                exit(EXIT_FAILURE);
            }
            if (partition < 1 || partition > 8) {
                error_report("Invalid partition %d", partition);
                exit(EXIT_FAILURE);
            }
            break;
        case 'k':
            sockpath = optarg;
            if (sockpath[0] != '/') {
                error_report("socket path must be absolute");
                exit(EXIT_FAILURE);
            }
            break;
        case 'd':
            disconnect = true;
            break;
        case 'c':
            device = optarg;
            break;
        case 'e':
            shared = strtol(optarg, &end, 0);
            if (*end) {
                error_report("Invalid shared device number '%s'", optarg);
                exit(EXIT_FAILURE);
            }
            if (shared < 1) {
                error_report("Shared device number must be greater than 0");
                exit(EXIT_FAILURE);
            }
            break;
        case 'f':
            fmt = optarg;
            break;
        case 't':
            persistent = 1;
            break;
        case 'x':
            export_name = optarg;
            break;
        case 'D':
            export_description = optarg;
            break;
        case 'v':
            verbose = 1;
            break;
        case 'V':
            version(argv[0]);
            exit(0);
            break;
        case 'h':
            usage(argv[0]);
            exit(0);
            break;
        case '?':
            error_report("Try `%s --help' for more information.", argv[0]);
            exit(EXIT_FAILURE);
        case QEMU_NBD_OPT_OBJECT: {
            QemuOpts *opts;
            opts = qemu_opts_parse_noisily(&qemu_object_opts,
                                           optarg, true);
            if (!opts) {
                exit(EXIT_FAILURE);
            }
        }   break;
        case QEMU_NBD_OPT_TLSCREDS:
            tlscredsid = optarg;
            break;
        case QEMU_NBD_OPT_IMAGE_OPTS:
            imageOpts = true;
            break;
        case 'T':
            g_free(trace_file);
            trace_file = trace_opt_parse(optarg);
            break;
        case QEMU_NBD_OPT_FORK:
            fork_process = true;
            break;
        }
    }

    if ((argc - optind) != 1) {
        error_report("Invalid number of arguments");
        error_printf("Try `%s --help' for more information.\n", argv[0]);
        exit(EXIT_FAILURE);
    }

    if (qemu_opts_foreach(&qemu_object_opts,
                          user_creatable_add_opts_foreach,
                          NULL, NULL)) {
        exit(EXIT_FAILURE);
    }

    if (!trace_init_backends()) {
        exit(1);
    }
    trace_init_file(trace_file);
    qemu_set_log(LOG_TRACE);

    socket_activation = check_socket_activation();
    if (socket_activation == 0) {
        setup_address_and_port(&bindto, &port);
    } else {
        /* Using socket activation - check user didn't use -p etc. */
        const char *err_msg = socket_activation_validate_opts(device, sockpath,
                                                              bindto, port);
        if (err_msg != NULL) {
            error_report("%s", err_msg);
            exit(EXIT_FAILURE);
        }

        /* qemu-nbd can only listen on a single socket.  */
        if (socket_activation > 1) {
            error_report("qemu-nbd does not support socket activation with %s > 1",
                         "LISTEN_FDS");
            exit(EXIT_FAILURE);
        }
    }

    if (tlscredsid) {
        if (sockpath) {
            error_report("TLS is only supported with IPv4/IPv6");
            exit(EXIT_FAILURE);
        }
        if (device) {
            error_report("TLS is not supported with a host device");
            exit(EXIT_FAILURE);
        }
        if (!export_name) {
            /* Set the default NBD protocol export name, since
             * we *must* use new style protocol for TLS */
            export_name = "";
        }
        tlscreds = nbd_get_tls_creds(tlscredsid, &local_err);
        if (local_err) {
            error_report("Failed to get TLS creds %s",
                         error_get_pretty(local_err));
            exit(EXIT_FAILURE);
        }
    }

    if (disconnect) {
        int nbdfd = open(argv[optind], O_RDWR);
        if (nbdfd < 0) {
            error_report("Cannot open %s: %s", argv[optind],
                         strerror(errno));
            exit(EXIT_FAILURE);
        }
        nbd_disconnect(nbdfd);

        close(nbdfd);

        printf("%s disconnected\n", argv[optind]);

        return 0;
    }

    if ((device && !verbose) || fork_process) {
        int stderr_fd[2];
        pid_t pid;
        int ret;

        if (qemu_pipe(stderr_fd) < 0) {
            error_report("Error setting up communication pipe: %s",
                         strerror(errno));
            exit(EXIT_FAILURE);
        }

        /* Now daemonize, but keep a communication channel open to
         * print errors and exit with the proper status code.
         */
        pid = fork();
        if (pid < 0) {
            error_report("Failed to fork: %s", strerror(errno));
            exit(EXIT_FAILURE);
        } else if (pid == 0) {
            close(stderr_fd[0]);
            ret = qemu_daemon(1, 0);

            /* Temporarily redirect stderr to the parent's pipe...  */
            old_stderr = dup(STDERR_FILENO);
            dup2(stderr_fd[1], STDERR_FILENO);
            if (ret < 0) {
                error_report("Failed to daemonize: %s", strerror(errno));
                exit(EXIT_FAILURE);
            }

            /* ... close the descriptor we inherited and go on.  */
            close(stderr_fd[1]);
        } else {
            bool errors = false;
            char *buf;

            /* In the parent.  Print error messages from the child until
             * it closes the pipe.
             */
            close(stderr_fd[1]);
            buf = g_malloc(1024);
            while ((ret = read(stderr_fd[0], buf, 1024)) > 0) {
                errors = true;
                ret = qemu_write_full(STDERR_FILENO, buf, ret);
                if (ret < 0) {
                    exit(EXIT_FAILURE);
                }
            }
            if (ret < 0) {
                error_report("Cannot read from daemon: %s",
                             strerror(errno));
                exit(EXIT_FAILURE);
            }

            /* Usually the daemon should not print any message.
             * Exit with zero status in that case.
             */
            exit(errors);
        }
    }

    if (device != NULL && sockpath == NULL) {
        sockpath = g_malloc(128);
        snprintf(sockpath, 128, SOCKET_PATH, basename(device));
    }

    if (socket_activation == 0) {
        server_ioc = qio_channel_socket_new();
        saddr = nbd_build_socket_address(sockpath, bindto, port);
        if (qio_channel_socket_listen_sync(server_ioc, saddr, &local_err) < 0) {
            object_unref(OBJECT(server_ioc));
            error_report_err(local_err);
            return 1;
        }
    } else {
        /* See comment in check_socket_activation above. */
        assert(socket_activation == 1);
        server_ioc = qio_channel_socket_new_fd(FIRST_SOCKET_ACTIVATION_FD,
                                               &local_err);
        if (server_ioc == NULL) {
            error_report("Failed to use socket activation: %s",
                         error_get_pretty(local_err));
            exit(EXIT_FAILURE);
        }
    }

    if (qemu_init_main_loop(&local_err)) {
        error_report_err(local_err);
        exit(EXIT_FAILURE);
    }
    bdrv_init();
    atexit(bdrv_close_all);

    srcpath = argv[optind];
    if (imageOpts) {
        QemuOpts *opts;
        if (fmt) {
            error_report("--image-opts and -f are mutually exclusive");
            exit(EXIT_FAILURE);
        }
        opts = qemu_opts_parse_noisily(&file_opts, srcpath, true);
        if (!opts) {
            qemu_opts_reset(&file_opts);
            exit(EXIT_FAILURE);
        }
        options = qemu_opts_to_qdict(opts, NULL);
        qemu_opts_reset(&file_opts);
        blk = blk_new_open(NULL, NULL, options, flags, &local_err);
    } else {
        if (fmt) {
            options = qdict_new();
            qdict_put_str(options, "driver", fmt);
        }
        blk = blk_new_open(srcpath, NULL, options, flags, &local_err);
    }

    if (!blk) {
        error_reportf_err(local_err, "Failed to blk_new_open '%s': ",
                          argv[optind]);
        exit(EXIT_FAILURE);
    }
    bs = blk_bs(blk);

    blk_set_enable_write_cache(blk, !writethrough);

    if (sn_opts) {
        ret = bdrv_snapshot_load_tmp(bs,
                                     qemu_opt_get(sn_opts, SNAPSHOT_OPT_ID),
                                     qemu_opt_get(sn_opts, SNAPSHOT_OPT_NAME),
                                     &local_err);
    } else if (sn_id_or_name) {
        ret = bdrv_snapshot_load_tmp_by_id_or_name(bs, sn_id_or_name,
                                                   &local_err);
    }
    if (ret < 0) {
        error_reportf_err(local_err, "Failed to load snapshot: ");
        exit(EXIT_FAILURE);
    }

    bs->detect_zeroes = detect_zeroes;
    fd_size = blk_getlength(blk);
    if (fd_size < 0) {
        error_report("Failed to determine the image length: %s",
                     strerror(-fd_size));
        exit(EXIT_FAILURE);
    }

    if (dev_offset >= fd_size) {
        error_report("Offset (%lld) has to be smaller than the image size "
                     "(%lld)",
                     (long long int)dev_offset, (long long int)fd_size);
        exit(EXIT_FAILURE);
    }
    fd_size -= dev_offset;

    if (partition != -1) {
        ret = find_partition(blk, partition, &dev_offset, &fd_size);
        if (ret < 0) {
            error_report("Could not find partition %d: %s", partition,
                         strerror(-ret));
            exit(EXIT_FAILURE);
        }
    }

    exp = nbd_export_new(bs, dev_offset, fd_size, nbdflags, nbd_export_closed,
                         writethrough, NULL, &local_err);
    if (!exp) {
        error_report_err(local_err);
        exit(EXIT_FAILURE);
    }
    if (export_name) {
        nbd_export_set_name(exp, export_name);
        nbd_export_set_description(exp, export_description);
        newproto = true;
    } else if (export_description) {
        error_report("Export description requires an export name");
        exit(EXIT_FAILURE);
    }

    if (device) {
        int ret;

        ret = pthread_create(&client_thread, NULL, nbd_client_thread, device);
        if (ret != 0) {
            error_report("Failed to create client thread: %s", strerror(ret));
            exit(EXIT_FAILURE);
        }
    } else {
        /* Shut up GCC warnings.  */
        memset(&client_thread, 0, sizeof(client_thread));
    }

    nbd_update_server_watch();

    /* now when the initialization is (almost) complete, chdir("/")
     * to free any busy filesystems */
    if (chdir("/") < 0) {
        error_report("Could not chdir to root directory: %s",
                     strerror(errno));
        exit(EXIT_FAILURE);
    }

    if (fork_process) {
        dup2(old_stderr, STDERR_FILENO);
        close(old_stderr);
    }

    state = RUNNING;
    do {
        main_loop_wait(false);
        if (state == TERMINATE) {
            state = TERMINATING;
            nbd_export_close(exp);
            nbd_export_put(exp);
            exp = NULL;
        }
    } while (state != TERMINATED);

    blk_unref(blk);
    if (sockpath) {
        unlink(sockpath);
    }

    qemu_opts_del(sn_opts);

    if (device) {
        void *ret;
        pthread_join(client_thread, &ret);
        exit(ret != NULL);
    } else {
        exit(EXIT_SUCCESS);
    }
}
示例#7
0
文件: gluster.c 项目: NormanM/qemu
static int qemu_gluster_open(BlockDriverState *bs,  QDict *options,
                             int bdrv_flags)
{
    BDRVGlusterState *s = bs->opaque;
    int open_flags = O_BINARY;
    int ret = 0;
    GlusterConf *gconf = g_malloc0(sizeof(GlusterConf));
    QemuOpts *opts;
    Error *local_err = NULL;
    const char *filename;

    opts = qemu_opts_create_nofail(&runtime_opts);
    qemu_opts_absorb_qdict(opts, options, &local_err);
    if (error_is_set(&local_err)) {
        qerror_report_err(local_err);
        error_free(local_err);
        ret = -EINVAL;
        goto out;
    }

    filename = qemu_opt_get(opts, "filename");


    s->glfs = qemu_gluster_init(gconf, filename);
    if (!s->glfs) {
        ret = -errno;
        goto out;
    }

    if (bdrv_flags & BDRV_O_RDWR) {
        open_flags |= O_RDWR;
    } else {
        open_flags |= O_RDONLY;
    }

    if ((bdrv_flags & BDRV_O_NOCACHE)) {
        open_flags |= O_DIRECT;
    }

    s->fd = glfs_open(s->glfs, gconf->image, open_flags);
    if (!s->fd) {
        ret = -errno;
        goto out;
    }

    ret = qemu_pipe(s->fds);
    if (ret < 0) {
        ret = -errno;
        goto out;
    }
    fcntl(s->fds[GLUSTER_FD_READ], F_SETFL, O_NONBLOCK);
    qemu_aio_set_fd_handler(s->fds[GLUSTER_FD_READ],
        qemu_gluster_aio_event_reader, NULL, s);

out:
    qemu_opts_del(opts);
    qemu_gluster_gconf_free(gconf);
    if (!ret) {
        return ret;
    }
    if (s->fd) {
        glfs_close(s->fd);
    }
    if (s->glfs) {
        glfs_fini(s->glfs);
    }
    return ret;
}
示例#8
0
int main(int argc, char **argv)
{
    BlockBackend *blk;
    BlockDriverState *bs;
    off_t dev_offset = 0;
    uint32_t nbdflags = 0;
    bool disconnect = false;
    const char *bindto = "0.0.0.0";
    const char *port = NULL;
    char *sockpath = NULL;
    char *device = NULL;
    off_t fd_size;
    QemuOpts *sn_opts = NULL;
    const char *sn_id_or_name = NULL;
    const char *sopt = "hVb:o:p:rsnP:c:dvk:e:f:tl:";
    struct option lopt[] = {
        { "help", 0, NULL, 'h' },
        { "version", 0, NULL, 'V' },
        { "bind", 1, NULL, 'b' },
        { "port", 1, NULL, 'p' },
        { "socket", 1, NULL, 'k' },
        { "offset", 1, NULL, 'o' },
        { "read-only", 0, NULL, 'r' },
        { "partition", 1, NULL, 'P' },
        { "connect", 1, NULL, 'c' },
        { "disconnect", 0, NULL, 'd' },
        { "snapshot", 0, NULL, 's' },
        { "load-snapshot", 1, NULL, 'l' },
        { "nocache", 0, NULL, 'n' },
        { "cache", 1, NULL, QEMU_NBD_OPT_CACHE },
        { "aio", 1, NULL, QEMU_NBD_OPT_AIO },
        { "discard", 1, NULL, QEMU_NBD_OPT_DISCARD },
        { "detect-zeroes", 1, NULL, QEMU_NBD_OPT_DETECT_ZEROES },
        { "shared", 1, NULL, 'e' },
        { "format", 1, NULL, 'f' },
        { "persistent", 0, NULL, 't' },
        { "verbose", 0, NULL, 'v' },
        { NULL, 0, NULL, 0 }
    };
    int ch;
    int opt_ind = 0;
    char *end;
    int flags = BDRV_O_RDWR;
    int partition = -1;
    int ret = 0;
    int fd;
    bool seen_cache = false;
    bool seen_discard = false;
    bool seen_aio = false;
    pthread_t client_thread;
    const char *fmt = NULL;
    Error *local_err = NULL;
    BlockdevDetectZeroesOptions detect_zeroes = BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF;
    QDict *options = NULL;

    /* The client thread uses SIGTERM to interrupt the server.  A signal
     * handler ensures that "qemu-nbd -v -c" exits with a nice status code.
     */
    struct sigaction sa_sigterm;
    memset(&sa_sigterm, 0, sizeof(sa_sigterm));
    sa_sigterm.sa_handler = termsig_handler;
    sigaction(SIGTERM, &sa_sigterm, NULL);
    qemu_init_exec_dir(argv[0]);

    while ((ch = getopt_long(argc, argv, sopt, lopt, &opt_ind)) != -1) {
        switch (ch) {
        case 's':
            flags |= BDRV_O_SNAPSHOT;
            break;
        case 'n':
            optarg = (char *) "none";
            /* fallthrough */
        case QEMU_NBD_OPT_CACHE:
            if (seen_cache) {
                errx(EXIT_FAILURE, "-n and --cache can only be specified once");
            }
            seen_cache = true;
            if (bdrv_parse_cache_flags(optarg, &flags) == -1) {
                errx(EXIT_FAILURE, "Invalid cache mode `%s'", optarg);
            }
            break;
        case QEMU_NBD_OPT_AIO:
            if (seen_aio) {
                errx(EXIT_FAILURE, "--aio can only be specified once");
            }
            seen_aio = true;
            if (!strcmp(optarg, "native")) {
                flags |= BDRV_O_NATIVE_AIO;
            } else if (!strcmp(optarg, "threads")) {
                /* this is the default */
            } else {
               errx(EXIT_FAILURE, "invalid aio mode `%s'", optarg);
            }
            break;
        case QEMU_NBD_OPT_DISCARD:
            if (seen_discard) {
                errx(EXIT_FAILURE, "--discard can only be specified once");
            }
            seen_discard = true;
            if (bdrv_parse_discard_flags(optarg, &flags) == -1) {
                errx(EXIT_FAILURE, "Invalid discard mode `%s'", optarg);
            }
            break;
        case QEMU_NBD_OPT_DETECT_ZEROES:
            detect_zeroes =
                qapi_enum_parse(BlockdevDetectZeroesOptions_lookup,
                                optarg,
                                BLOCKDEV_DETECT_ZEROES_OPTIONS_MAX,
                                BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF,
                                &local_err);
            if (local_err) {
                errx(EXIT_FAILURE, "Failed to parse detect_zeroes mode: %s", 
                     error_get_pretty(local_err));
            }
            if (detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP &&
                !(flags & BDRV_O_UNMAP)) {
                errx(EXIT_FAILURE, "setting detect-zeroes to unmap is not allowed "
                                   "without setting discard operation to unmap"); 
            }
            break;
        case 'b':
            bindto = optarg;
            break;
        case 'p':
            port = optarg;
            break;
        case 'o':
                dev_offset = strtoll (optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid offset `%s'", optarg);
            }
            if (dev_offset < 0) {
                errx(EXIT_FAILURE, "Offset must be positive `%s'", optarg);
            }
            break;
        case 'l':
            if (strstart(optarg, SNAPSHOT_OPT_BASE, NULL)) {
                sn_opts = qemu_opts_parse_noisily(&internal_snapshot_opts,
                                                  optarg, false);
                if (!sn_opts) {
                    errx(EXIT_FAILURE, "Failed in parsing snapshot param `%s'",
                         optarg);
                }
            } else {
                sn_id_or_name = optarg;
            }
            /* fall through */
        case 'r':
            nbdflags |= NBD_FLAG_READ_ONLY;
            flags &= ~BDRV_O_RDWR;
            break;
        case 'P':
            partition = strtol(optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid partition `%s'", optarg);
            }
            if (partition < 1 || partition > 8) {
                errx(EXIT_FAILURE, "Invalid partition %d", partition);
            }
            break;
        case 'k':
            sockpath = optarg;
            if (sockpath[0] != '/') {
                errx(EXIT_FAILURE, "socket path must be absolute\n");
            }
            break;
        case 'd':
            disconnect = true;
            break;
        case 'c':
            device = optarg;
            break;
        case 'e':
            shared = strtol(optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid shared device number '%s'", optarg);
            }
            if (shared < 1) {
                errx(EXIT_FAILURE, "Shared device number must be greater than 0\n");
            }
            break;
        case 'f':
            fmt = optarg;
            break;
        case 't':
            persistent = 1;
            break;
        case 'v':
            verbose = 1;
            break;
        case 'V':
            version(argv[0]);
            exit(0);
            break;
        case 'h':
            usage(argv[0]);
            exit(0);
            break;
        case '?':
            errx(EXIT_FAILURE, "Try `%s --help' for more information.",
                 argv[0]);
        }
    }

    if ((argc - optind) != 1) {
        errx(EXIT_FAILURE, "Invalid number of argument.\n"
             "Try `%s --help' for more information.",
             argv[0]);
    }

    if (disconnect) {
        fd = open(argv[optind], O_RDWR);
        if (fd < 0) {
            err(EXIT_FAILURE, "Cannot open %s", argv[optind]);
        }
        nbd_disconnect(fd);

        close(fd);

        printf("%s disconnected\n", argv[optind]);

        return 0;
    }

    if (device && !verbose) {
        int stderr_fd[2];
        pid_t pid;
        int ret;

        if (qemu_pipe(stderr_fd) < 0) {
            err(EXIT_FAILURE, "Error setting up communication pipe");
        }

        /* Now daemonize, but keep a communication channel open to
         * print errors and exit with the proper status code.
         */
        pid = fork();
        if (pid < 0) {
            err(EXIT_FAILURE, "Failed to fork");
        } else if (pid == 0) {
            close(stderr_fd[0]);
            ret = qemu_daemon(1, 0);

            /* Temporarily redirect stderr to the parent's pipe...  */
            dup2(stderr_fd[1], STDERR_FILENO);
            if (ret < 0) {
                err(EXIT_FAILURE, "Failed to daemonize");
            }

            /* ... close the descriptor we inherited and go on.  */
            close(stderr_fd[1]);
        } else {
            bool errors = false;
            char *buf;

            /* In the parent.  Print error messages from the child until
             * it closes the pipe.
             */
            close(stderr_fd[1]);
            buf = g_malloc(1024);
            while ((ret = read(stderr_fd[0], buf, 1024)) > 0) {
                errors = true;
                ret = qemu_write_full(STDERR_FILENO, buf, ret);
                if (ret < 0) {
                    exit(EXIT_FAILURE);
                }
            }
            if (ret < 0) {
                err(EXIT_FAILURE, "Cannot read from daemon");
            }

            /* Usually the daemon should not print any message.
             * Exit with zero status in that case.
             */
            exit(errors);
        }
    }

    if (device != NULL && sockpath == NULL) {
        sockpath = g_malloc(128);
        snprintf(sockpath, 128, SOCKET_PATH, basename(device));
    }

    saddr = nbd_build_socket_address(sockpath, bindto, port);

    if (qemu_init_main_loop(&local_err)) {
        error_report_err(local_err);
        exit(EXIT_FAILURE);
    }
    bdrv_init();
    atexit(bdrv_close_all);

    if (fmt) {
        options = qdict_new();
        qdict_put(options, "driver", qstring_from_str(fmt));
    }

    srcpath = argv[optind];
    blk = blk_new_open("hda", srcpath, NULL, options, flags, &local_err);
    if (!blk) {
        errx(EXIT_FAILURE, "Failed to blk_new_open '%s': %s", argv[optind],
             error_get_pretty(local_err));
    }
    bs = blk_bs(blk);

    if (sn_opts) {
        ret = bdrv_snapshot_load_tmp(bs,
                                     qemu_opt_get(sn_opts, SNAPSHOT_OPT_ID),
                                     qemu_opt_get(sn_opts, SNAPSHOT_OPT_NAME),
                                     &local_err);
    } else if (sn_id_or_name) {
        ret = bdrv_snapshot_load_tmp_by_id_or_name(bs, sn_id_or_name,
                                                   &local_err);
    }
    if (ret < 0) {
        errno = -ret;
        err(EXIT_FAILURE,
            "Failed to load snapshot: %s",
            error_get_pretty(local_err));
    }

    bs->detect_zeroes = detect_zeroes;
    fd_size = blk_getlength(blk);
    if (fd_size < 0) {
        errx(EXIT_FAILURE, "Failed to determine the image length: %s",
             strerror(-fd_size));
    }

    if (partition != -1) {
        ret = find_partition(blk, partition, &dev_offset, &fd_size);
        if (ret < 0) {
            errno = -ret;
            err(EXIT_FAILURE, "Could not find partition %d", partition);
        }
    }

    exp = nbd_export_new(blk, dev_offset, fd_size, nbdflags, nbd_export_closed,
                         &local_err);
    if (!exp) {
        errx(EXIT_FAILURE, "%s", error_get_pretty(local_err));
    }

    fd = socket_listen(saddr, &local_err);
    if (fd < 0) {
        error_report_err(local_err);
        return 1;
    }

    if (device) {
        int ret;

        ret = pthread_create(&client_thread, NULL, nbd_client_thread, device);
        if (ret != 0) {
            errx(EXIT_FAILURE, "Failed to create client thread: %s",
                 strerror(ret));
        }
    } else {
        /* Shut up GCC warnings.  */
        memset(&client_thread, 0, sizeof(client_thread));
    }

    server_fd = fd;
    nbd_update_server_fd_handler(fd);

    /* now when the initialization is (almost) complete, chdir("/")
     * to free any busy filesystems */
    if (chdir("/") < 0) {
        err(EXIT_FAILURE, "Could not chdir to root directory");
    }

    state = RUNNING;
    do {
        main_loop_wait(false);
        if (state == TERMINATE) {
            state = TERMINATING;
            nbd_export_close(exp);
            nbd_export_put(exp);
            exp = NULL;
        }
    } while (state != TERMINATED);

    blk_unref(blk);
    if (sockpath) {
        unlink(sockpath);
    }

    qemu_opts_del(sn_opts);

    if (device) {
        void *ret;
        pthread_join(client_thread, &ret);
        exit(ret != NULL);
    } else {
        exit(EXIT_SUCCESS);
    }
}
示例#9
0
文件: rbd.c 项目: dorlaor/qemu
static int qemu_rbd_open(BlockDriverState *bs, const char *filename, int flags)
{
    BDRVRBDState *s = bs->opaque;
    char pool[RBD_MAX_POOL_NAME_SIZE];
    char snap_buf[RBD_MAX_SNAP_NAME_SIZE];
    char conf[RBD_MAX_CONF_SIZE];
    char clientname_buf[RBD_MAX_CONF_SIZE];
    char *clientname;
    int r;

    if (qemu_rbd_parsename(filename, pool, sizeof(pool),
                           snap_buf, sizeof(snap_buf),
                           s->name, sizeof(s->name),
                           conf, sizeof(conf)) < 0) {
        return -EINVAL;
    }

    clientname = qemu_rbd_parse_clientname(conf, clientname_buf);
    r = rados_create(&s->cluster, clientname);
    if (r < 0) {
        error_report("error initializing");
        return r;
    }

    s->snap = NULL;
    if (snap_buf[0] != '\0') {
        s->snap = g_strdup(snap_buf);
    }

    if (strstr(conf, "conf=") == NULL) {
        /* try default location, but ignore failure */
        rados_conf_read_file(s->cluster, NULL);
    }

    if (conf[0] != '\0') {
        r = qemu_rbd_set_conf(s->cluster, conf);
        if (r < 0) {
            error_report("error setting config options");
            goto failed_shutdown;
        }
    }

    r = rados_connect(s->cluster);
    if (r < 0) {
        error_report("error connecting");
        goto failed_shutdown;
    }

    r = rados_ioctx_create(s->cluster, pool, &s->io_ctx);
    if (r < 0) {
        error_report("error opening pool %s", pool);
        goto failed_shutdown;
    }

    r = rbd_open(s->io_ctx, s->name, &s->image, s->snap);
    if (r < 0) {
        error_report("error reading header from %s", s->name);
        goto failed_open;
    }

    bs->read_only = (s->snap != NULL);

    s->event_reader_pos = 0;
    r = qemu_pipe(s->fds);
    if (r < 0) {
        error_report("error opening eventfd");
        goto failed;
    }
    fcntl(s->fds[0], F_SETFL, O_NONBLOCK);
    fcntl(s->fds[1], F_SETFL, O_NONBLOCK);
    qemu_aio_set_fd_handler(s->fds[RBD_FD_READ], qemu_rbd_aio_event_reader,
                            NULL, qemu_rbd_aio_flush_cb, NULL, s);


    return 0;

failed:
    rbd_close(s->image);
failed_open:
    rados_ioctx_destroy(s->io_ctx);
failed_shutdown:
    rados_shutdown(s->cluster);
    g_free(s->snap);
    return r;
}
示例#10
0
文件: qemu-nbd.c 项目: 0bliv10n/s2e
int main(int argc, char **argv)
{
    BlockDriverState *bs;
    off_t dev_offset = 0;
    uint32_t nbdflags = 0;
    bool disconnect = false;
    const char *bindto = "0.0.0.0";
    char *device = NULL;
    int port = NBD_DEFAULT_PORT;
    off_t fd_size;
    const char *sopt = "hVb:o:p:rsnP:c:dvk:e:t";
    struct option lopt[] = {
        { "help", 0, NULL, 'h' },
        { "version", 0, NULL, 'V' },
        { "bind", 1, NULL, 'b' },
        { "port", 1, NULL, 'p' },
        { "socket", 1, NULL, 'k' },
        { "offset", 1, NULL, 'o' },
        { "read-only", 0, NULL, 'r' },
        { "partition", 1, NULL, 'P' },
        { "connect", 1, NULL, 'c' },
        { "disconnect", 0, NULL, 'd' },
        { "snapshot", 0, NULL, 's' },
        { "nocache", 0, NULL, 'n' },
        { "shared", 1, NULL, 'e' },
        { "persistent", 0, NULL, 't' },
        { "verbose", 0, NULL, 'v' },
        { NULL, 0, NULL, 0 }
    };
    int ch;
    int opt_ind = 0;
    int li;
    char *end;
    int flags = BDRV_O_RDWR;
    int partition = -1;
    int ret;
    int fd;
    int persistent = 0;
    pthread_t client_thread;

    /* The client thread uses SIGTERM to interrupt the server.  A signal
     * handler ensures that "qemu-nbd -v -c" exits with a nice status code.
     */
    struct sigaction sa_sigterm;
    memset(&sa_sigterm, 0, sizeof(sa_sigterm));
    sa_sigterm.sa_handler = termsig_handler;
    sigaction(SIGTERM, &sa_sigterm, NULL);

    while ((ch = getopt_long(argc, argv, sopt, lopt, &opt_ind)) != -1) {
        switch (ch) {
        case 's':
            flags |= BDRV_O_SNAPSHOT;
            break;
        case 'n':
            flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
            break;
        case 'b':
            bindto = optarg;
            break;
        case 'p':
            li = strtol(optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid port `%s'", optarg);
            }
            if (li < 1 || li > 65535) {
                errx(EXIT_FAILURE, "Port out of range `%s'", optarg);
            }
            port = (uint16_t)li;
            break;
        case 'o':
                dev_offset = strtoll (optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid offset `%s'", optarg);
            }
            if (dev_offset < 0) {
                errx(EXIT_FAILURE, "Offset must be positive `%s'", optarg);
            }
            break;
        case 'r':
            nbdflags |= NBD_FLAG_READ_ONLY;
            flags &= ~BDRV_O_RDWR;
            break;
        case 'P':
            partition = strtol(optarg, &end, 0);
            if (*end)
                errx(EXIT_FAILURE, "Invalid partition `%s'", optarg);
            if (partition < 1 || partition > 8)
                errx(EXIT_FAILURE, "Invalid partition %d", partition);
            break;
        case 'k':
            sockpath = optarg;
            if (sockpath[0] != '/')
                errx(EXIT_FAILURE, "socket path must be absolute\n");
            break;
        case 'd':
            disconnect = true;
            break;
        case 'c':
            device = optarg;
            break;
        case 'e':
            shared = strtol(optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid shared device number '%s'", optarg);
            }
            if (shared < 1) {
                errx(EXIT_FAILURE, "Shared device number must be greater than 0\n");
            }
            break;
	case 't':
	    persistent = 1;
	    break;
        case 'v':
            verbose = 1;
            break;
        case 'V':
            version(argv[0]);
            exit(0);
            break;
        case 'h':
            usage(argv[0]);
            exit(0);
            break;
        case '?':
            errx(EXIT_FAILURE, "Try `%s --help' for more information.",
                 argv[0]);
        }
    }

    if ((argc - optind) != 1) {
        errx(EXIT_FAILURE, "Invalid number of argument.\n"
             "Try `%s --help' for more information.",
             argv[0]);
    }

    if (disconnect) {
        fd = open(argv[optind], O_RDWR);
        if (fd == -1)
            err(EXIT_FAILURE, "Cannot open %s", argv[optind]);

        nbd_disconnect(fd);

        close(fd);

        printf("%s disconnected\n", argv[optind]);

	return 0;
    }

    if (device && !verbose) {
        int stderr_fd[2];
        pid_t pid;
        int ret;

        if (qemu_pipe(stderr_fd) == -1) {
            err(EXIT_FAILURE, "Error setting up communication pipe");
        }

        /* Now daemonize, but keep a communication channel open to
         * print errors and exit with the proper status code.
         */
        pid = fork();
        if (pid == 0) {
            close(stderr_fd[0]);
            ret = qemu_daemon(1, 0);

            /* Temporarily redirect stderr to the parent's pipe...  */
            dup2(stderr_fd[1], STDERR_FILENO);
            if (ret == -1) {
                err(EXIT_FAILURE, "Failed to daemonize");
            }

            /* ... close the descriptor we inherited and go on.  */
            close(stderr_fd[1]);
        } else {
            bool errors = false;
            char *buf;

            /* In the parent.  Print error messages from the child until
             * it closes the pipe.
             */
            close(stderr_fd[1]);
            buf = g_malloc(1024);
            while ((ret = read(stderr_fd[0], buf, 1024)) > 0) {
                errors = true;
                ret = qemu_write_full(STDERR_FILENO, buf, ret);
                if (ret == -1) {
                    exit(EXIT_FAILURE);
                }
            }
            if (ret == -1) {
                err(EXIT_FAILURE, "Cannot read from daemon");
            }

            /* Usually the daemon should not print any message.
             * Exit with zero status in that case.
             */
            exit(errors);
        }
    }

    if (device != NULL && sockpath == NULL) {
        sockpath = g_malloc(128);
        snprintf(sockpath, 128, SOCKET_PATH, basename(device));
    }

    bdrv_init();
    atexit(bdrv_close_all);

    bs = bdrv_new("hda");
    srcpath = argv[optind];
    if ((ret = bdrv_open(bs, srcpath, flags, NULL)) < 0) {
        errno = -ret;
        err(EXIT_FAILURE, "Failed to bdrv_open '%s'", argv[optind]);
    }

    fd_size = bs->total_sectors * 512;

    if (partition != -1 &&
        find_partition(bs, partition, &dev_offset, &fd_size)) {
        err(EXIT_FAILURE, "Could not find partition %d", partition);
    }

    exp = nbd_export_new(bs, dev_offset, fd_size, nbdflags);

    if (sockpath) {
        fd = unix_socket_incoming(sockpath);
    } else {
        fd = tcp_socket_incoming(bindto, port);
    }

    if (fd == -1) {
        return 1;
    }

    if (device) {
        int ret;

        ret = pthread_create(&client_thread, NULL, nbd_client_thread, device);
        if (ret != 0) {
            errx(EXIT_FAILURE, "Failed to create client thread: %s",
                 strerror(ret));
        }
    } else {
        /* Shut up GCC warnings.  */
        memset(&client_thread, 0, sizeof(client_thread));
    }

    qemu_init_main_loop();
    qemu_set_fd_handler2(fd, nbd_can_accept, nbd_accept, NULL,
                         (void *)(uintptr_t)fd);

    /* now when the initialization is (almost) complete, chdir("/")
     * to free any busy filesystems */
    if (chdir("/") < 0) {
        err(EXIT_FAILURE, "Could not chdir to root directory");
    }

    do {
        main_loop_wait(false);
    } while (!sigterm_reported && (persistent || !nbd_started || nb_fds > 0));

    nbd_export_close(exp);
    if (sockpath) {
        unlink(sockpath);
    }

    if (device) {
        void *ret;
        pthread_join(client_thread, &ret);
        exit(ret != NULL);
    } else {
        exit(EXIT_SUCCESS);
    }
}
示例#11
0
文件: qemu-nbd.c 项目: 3a9LL/panda
int main(int argc, char **argv)
{
    BlockDriverState *bs;
    off_t dev_offset = 0;
    off_t offset = 0;
    uint32_t nbdflags = 0;
    bool disconnect = false;
    const char *bindto = "0.0.0.0";
    int port = NBD_DEFAULT_PORT;
    struct sockaddr_in addr;
    socklen_t addr_len = sizeof(addr);
    off_t fd_size;
    const char *sopt = "hVb:o:p:rsnP:c:dvk:e:t";
    struct option lopt[] = {
        { "help", 0, NULL, 'h' },
        { "version", 0, NULL, 'V' },
        { "bind", 1, NULL, 'b' },
        { "port", 1, NULL, 'p' },
        { "socket", 1, NULL, 'k' },
        { "offset", 1, NULL, 'o' },
        { "read-only", 0, NULL, 'r' },
        { "partition", 1, NULL, 'P' },
        { "connect", 1, NULL, 'c' },
        { "disconnect", 0, NULL, 'd' },
        { "snapshot", 0, NULL, 's' },
        { "nocache", 0, NULL, 'n' },
        { "shared", 1, NULL, 'e' },
        { "persistent", 0, NULL, 't' },
        { "verbose", 0, NULL, 'v' },
        { NULL, 0, NULL, 0 }
    };
    int ch;
    int opt_ind = 0;
    int li;
    char *end;
    int flags = BDRV_O_RDWR;
    int partition = -1;
    int ret;
    int shared = 1;
    uint8_t *data;
    fd_set fds;
    int *sharing_fds;
    int fd;
    int i;
    int nb_fds = 0;
    int max_fd;
    int persistent = 0;
    pthread_t client_thread;

    /* The client thread uses SIGTERM to interrupt the server.  A signal
     * handler ensures that "qemu-nbd -v -c" exits with a nice status code.
     */
    struct sigaction sa_sigterm;
    int sigterm_fd[2];
    if (qemu_pipe(sigterm_fd) == -1) {
        err(EXIT_FAILURE, "Error setting up communication pipe");
    }

    sigterm_wfd = sigterm_fd[1];
    memset(&sa_sigterm, 0, sizeof(sa_sigterm));
    sa_sigterm.sa_handler = termsig_handler;
    sigaction(SIGTERM, &sa_sigterm, NULL);

    while ((ch = getopt_long(argc, argv, sopt, lopt, &opt_ind)) != -1) {
        switch (ch) {
        case 's':
            flags |= BDRV_O_SNAPSHOT;
            break;
        case 'n':
            flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
            break;
        case 'b':
            bindto = optarg;
            break;
        case 'p':
            li = strtol(optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid port `%s'", optarg);
            }
            if (li < 1 || li > 65535) {
                errx(EXIT_FAILURE, "Port out of range `%s'", optarg);
            }
            port = (uint16_t)li;
            break;
        case 'o':
                dev_offset = strtoll (optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid offset `%s'", optarg);
            }
            if (dev_offset < 0) {
                errx(EXIT_FAILURE, "Offset must be positive `%s'", optarg);
            }
            break;
        case 'r':
            nbdflags |= NBD_FLAG_READ_ONLY;
            flags &= ~BDRV_O_RDWR;
            break;
        case 'P':
            partition = strtol(optarg, &end, 0);
            if (*end)
                errx(EXIT_FAILURE, "Invalid partition `%s'", optarg);
            if (partition < 1 || partition > 8)
                errx(EXIT_FAILURE, "Invalid partition %d", partition);
            break;
        case 'k':
            sockpath = optarg;
            if (sockpath[0] != '/')
                errx(EXIT_FAILURE, "socket path must be absolute\n");
            break;
        case 'd':
            disconnect = true;
            break;
        case 'c':
            device = optarg;
            break;
        case 'e':
            shared = strtol(optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid shared device number '%s'", optarg);
            }
            if (shared < 1) {
                errx(EXIT_FAILURE, "Shared device number must be greater than 0\n");
            }
            break;
	case 't':
	    persistent = 1;
	    break;
        case 'v':
            verbose = 1;
            break;
        case 'V':
            version(argv[0]);
            exit(0);
            break;
        case 'h':
            usage(argv[0]);
            exit(0);
            break;
        case '?':
            errx(EXIT_FAILURE, "Try `%s --help' for more information.",
                 argv[0]);
        }
    }

    if ((argc - optind) != 1) {
        errx(EXIT_FAILURE, "Invalid number of argument.\n"
             "Try `%s --help' for more information.",
             argv[0]);
    }

    if (disconnect) {
        fd = open(argv[optind], O_RDWR);
        if (fd == -1)
            err(EXIT_FAILURE, "Cannot open %s", argv[optind]);

        nbd_disconnect(fd);

        close(fd);

        printf("%s disconnected\n", argv[optind]);

	return 0;
    }

    if (device && !verbose) {
        int stderr_fd[2];
        pid_t pid;
        int ret;

        if (qemu_pipe(stderr_fd) == -1) {
            err(EXIT_FAILURE, "Error setting up communication pipe");
        }

        /* Now daemonize, but keep a communication channel open to
         * print errors and exit with the proper status code.
         */
        pid = fork();
        if (pid == 0) {
            close(stderr_fd[0]);
            ret = qemu_daemon(0, 0);

            /* Temporarily redirect stderr to the parent's pipe...  */
            dup2(stderr_fd[1], STDERR_FILENO);
            if (ret == -1) {
                err(EXIT_FAILURE, "Failed to daemonize");
            }

            /* ... close the descriptor we inherited and go on.  */
            close(stderr_fd[1]);
        } else {
            bool errors = false;
            char *buf;

            /* In the parent.  Print error messages from the child until
             * it closes the pipe.
             */
            close(stderr_fd[1]);
            buf = g_malloc(1024);
            while ((ret = read(stderr_fd[0], buf, 1024)) > 0) {
                errors = true;
                ret = qemu_write_full(STDERR_FILENO, buf, ret);
                if (ret == -1) {
                    exit(EXIT_FAILURE);
                }
            }
            if (ret == -1) {
                err(EXIT_FAILURE, "Cannot read from daemon");
            }

            /* Usually the daemon should not print any message.
             * Exit with zero status in that case.
             */
            exit(errors);
        }
    }

    if (device) {
        /* Open before spawning new threads.  In the future, we may
         * drop privileges after opening.
         */
        fd = open(device, O_RDWR);
        if (fd == -1) {
            err(EXIT_FAILURE, "Failed to open %s", device);
        }

        if (sockpath == NULL) {
            sockpath = g_malloc(128);
            snprintf(sockpath, 128, SOCKET_PATH, basename(device));
        }
    }

    bdrv_init();
    atexit(bdrv_close_all);

    bs = bdrv_new("hda");
    srcpath = argv[optind];
    if ((ret = bdrv_open(bs, srcpath, flags, NULL)) < 0) {
        errno = -ret;
        err(EXIT_FAILURE, "Failed to bdrv_open '%s'", argv[optind]);
    }

    fd_size = bs->total_sectors * 512;

    if (partition != -1 &&
        find_partition(bs, partition, &dev_offset, &fd_size)) {
        err(EXIT_FAILURE, "Could not find partition %d", partition);
    }

    sharing_fds = g_malloc((shared + 1) * sizeof(int));

    if (sockpath) {
        sharing_fds[0] = unix_socket_incoming(sockpath);
    } else {
        sharing_fds[0] = tcp_socket_incoming(bindto, port);
    }

    if (sharing_fds[0] == -1)
        return 1;

    if (device) {
        int ret;

        ret = pthread_create(&client_thread, NULL, nbd_client_thread, &fd);
        if (ret != 0) {
            errx(EXIT_FAILURE, "Failed to create client thread: %s",
                 strerror(ret));
        }
    } else {
        /* Shut up GCC warnings.  */
        memset(&client_thread, 0, sizeof(client_thread));
    }

    max_fd = sharing_fds[0];
    nb_fds++;

    data = qemu_blockalign(bs, NBD_BUFFER_SIZE);
    if (data == NULL) {
        errx(EXIT_FAILURE, "Cannot allocate data buffer");
    }

    do {
        FD_ZERO(&fds);
        FD_SET(sigterm_fd[0], &fds);
        for (i = 0; i < nb_fds; i++)
            FD_SET(sharing_fds[i], &fds);

        do {
            ret = select(max_fd + 1, &fds, NULL, NULL, NULL);
        } while (ret == -1 && errno == EINTR);
        if (ret == -1 || FD_ISSET(sigterm_fd[0], &fds)) {
            break;
        }

        if (FD_ISSET(sharing_fds[0], &fds))
            ret--;
        for (i = 1; i < nb_fds && ret; i++) {
            if (FD_ISSET(sharing_fds[i], &fds)) {
                if (nbd_trip(bs, sharing_fds[i], fd_size, dev_offset,
                    &offset, nbdflags, data, NBD_BUFFER_SIZE) != 0) {
                    close(sharing_fds[i]);
                    nb_fds--;
                    sharing_fds[i] = sharing_fds[nb_fds];
                    i--;
                }
                ret--;
            }
        }
        /* new connection ? */
        if (FD_ISSET(sharing_fds[0], &fds)) {
            if (nb_fds < shared + 1) {
                sharing_fds[nb_fds] = accept(sharing_fds[0],
                                             (struct sockaddr *)&addr,
                                             &addr_len);
                if (sharing_fds[nb_fds] != -1 &&
                    nbd_negotiate(sharing_fds[nb_fds], fd_size, nbdflags) != -1) {
                        if (sharing_fds[nb_fds] > max_fd)
                            max_fd = sharing_fds[nb_fds];
                        nb_fds++;
                }
            }
        }
    } while (persistent || nb_fds > 1);
    qemu_vfree(data);

    close(sharing_fds[0]);
    g_free(sharing_fds);
    if (sockpath) {
        unlink(sockpath);
    }

    if (device) {
        void *ret;
        pthread_join(client_thread, &ret);
        exit(ret != NULL);
    } else {
        exit(EXIT_SUCCESS);
    }
}