/*
* drv_init() - a device potentially for us
*
* notes: drv_init() is called when the bus driver has located a card for us
* to support. We accept the new device by returning 0.
*/
static int r871xu_drv_init(struct usb_interface *pusb_intf,
const struct usb_device_id *pdid)
{
uint status;
struct _adapter *padapter = NULL;
struct dvobj_priv *pdvobjpriv;
struct net_device *pnetdev;
struct usb_device *udev;
/* In this probe function, O.S. will provide the usb interface pointer
* to driver. We have to increase the reference count of the usb device
* structure by using the usb_get_dev function.
*/
udev = interface_to_usbdev(pusb_intf);
usb_get_dev(udev);
pintf = pusb_intf;
/* step 1. */
pnetdev = r8712_init_netdev();
if (!pnetdev)
goto error;
padapter = netdev_priv(pnetdev);
disable_ht_for_spec_devid(pdid, padapter);
pdvobjpriv = &padapter->dvobjpriv;
pdvobjpriv->padapter = padapter;
padapter->dvobjpriv.pusbdev = udev;
padapter->pusb_intf = pusb_intf;
usb_set_intfdata(pusb_intf, pnetdev);
SET_NETDEV_DEV(pnetdev, &pusb_intf->dev);
pnetdev->dev.type = &wlan_type;
/* step 2. */
padapter->dvobj_init = r8712_usb_dvobj_init;
padapter->dvobj_deinit = r8712_usb_dvobj_deinit;
padapter->halpriv.hal_bus_init = r8712_usb_hal_bus_init;
padapter->dvobjpriv.inirp_init = r8712_usb_inirp_init;
padapter->dvobjpriv.inirp_deinit = r8712_usb_inirp_deinit;
/* step 3.
* initialize the dvobj_priv
*/
if (!padapter->dvobj_init) {
goto error;
} else {
status = padapter->dvobj_init(padapter);
if (status != _SUCCESS)
goto error;
}
/* step 4. */
status = r8712_init_drv_sw(padapter);
if (status == _FAIL)
goto error;
/* step 5. read efuse/eeprom data and get mac_addr */
{
int i, offset;
u8 mac[6];
u8 tmpU1b, AutoloadFail, eeprom_CustomerID;
u8 *pdata = padapter->eeprompriv.efuse_eeprom_data;
tmpU1b = r8712_read8(padapter, EE_9346CR);/*CR9346*/
/* To check system boot selection.*/
dev_info(&udev->dev, "r8712u: Boot from %s: Autoload %s\n",
(tmpU1b & _9356SEL) ? "EEPROM" : "EFUSE",
(tmpU1b & _EEPROM_EN) ? "OK" : "Failed");
/* To check autoload success or not.*/
if (tmpU1b & _EEPROM_EN) {
AutoloadFail = true;
/* The following operations prevent Efuse leakage by
* turning on 2.5V.
*/
tmpU1b = r8712_read8(padapter, EFUSE_TEST + 3);
r8712_write8(padapter, EFUSE_TEST + 3, tmpU1b | 0x80);
msleep(20);
r8712_write8(padapter, EFUSE_TEST + 3,
(tmpU1b & (~BIT(7))));
/* Retrieve Chip version.
* Recognize IC version by Reg0x4 BIT15.
*/
tmpU1b = (u8)((r8712_read32(padapter, PMC_FSM) >> 15) &
0x1F);
if (tmpU1b == 0x3)
padapter->registrypriv.chip_version =
RTL8712_3rdCUT;
else
padapter->registrypriv.chip_version =
(tmpU1b >> 1) + 1;
switch (padapter->registrypriv.chip_version) {
case RTL8712_1stCUT:
case RTL8712_2ndCUT:
case RTL8712_3rdCUT:
break;
default:
padapter->registrypriv.chip_version =
RTL8712_2ndCUT;
break;
}
for (i = 0, offset = 0; i < 128; i += 8, offset++)
r8712_efuse_pg_packet_read(padapter, offset,
&pdata[i]);
if (!r8712_initmac || !mac_pton(r8712_initmac, mac)) {
/* Use the mac address stored in the Efuse
* offset = 0x12 for usb in efuse
*/
ether_addr_copy(mac, &pdata[0x12]);
}
eeprom_CustomerID = pdata[0x52];
switch (eeprom_CustomerID) {
case EEPROM_CID_ALPHA:
padapter->eeprompriv.CustomerID =
RT_CID_819x_ALPHA;
break;
case EEPROM_CID_CAMEO:
padapter->eeprompriv.CustomerID =
RT_CID_819x_CAMEO;
break;
case EEPROM_CID_SITECOM:
padapter->eeprompriv.CustomerID =
RT_CID_819x_Sitecom;
break;
case EEPROM_CID_COREGA:
padapter->eeprompriv.CustomerID =
RT_CID_COREGA;
break;
case EEPROM_CID_Senao:
padapter->eeprompriv.CustomerID =
RT_CID_819x_Senao;
break;
case EEPROM_CID_EDIMAX_BELKIN:
padapter->eeprompriv.CustomerID =
RT_CID_819x_Edimax_Belkin;
break;
case EEPROM_CID_SERCOMM_BELKIN:
padapter->eeprompriv.CustomerID =
RT_CID_819x_Sercomm_Belkin;
break;
case EEPROM_CID_WNC_COREGA:
padapter->eeprompriv.CustomerID =
RT_CID_819x_WNC_COREGA;
break;
case EEPROM_CID_WHQL:
break;
case EEPROM_CID_NetCore:
padapter->eeprompriv.CustomerID =
RT_CID_819x_Netcore;
break;
case EEPROM_CID_CAMEO1:
padapter->eeprompriv.CustomerID =
RT_CID_819x_CAMEO1;
break;
case EEPROM_CID_CLEVO:
padapter->eeprompriv.CustomerID =
RT_CID_819x_CLEVO;
break;
default:
padapter->eeprompriv.CustomerID =
RT_CID_DEFAULT;
break;
}
dev_info(&udev->dev, "r8712u: CustomerID = 0x%.4x\n",
padapter->eeprompriv.CustomerID);
/* Led mode */
switch (padapter->eeprompriv.CustomerID) {
case RT_CID_DEFAULT:
case RT_CID_819x_ALPHA:
case RT_CID_819x_CAMEO:
padapter->ledpriv.LedStrategy = SW_LED_MODE1;
padapter->ledpriv.bRegUseLed = true;
break;
case RT_CID_819x_Sitecom:
padapter->ledpriv.LedStrategy = SW_LED_MODE2;
padapter->ledpriv.bRegUseLed = true;
break;
case RT_CID_COREGA:
case RT_CID_819x_Senao:
padapter->ledpriv.LedStrategy = SW_LED_MODE3;
padapter->ledpriv.bRegUseLed = true;
break;
case RT_CID_819x_Edimax_Belkin:
padapter->ledpriv.LedStrategy = SW_LED_MODE4;
padapter->ledpriv.bRegUseLed = true;
break;
case RT_CID_819x_Sercomm_Belkin:
padapter->ledpriv.LedStrategy = SW_LED_MODE5;
padapter->ledpriv.bRegUseLed = true;
break;
case RT_CID_819x_WNC_COREGA:
padapter->ledpriv.LedStrategy = SW_LED_MODE6;
padapter->ledpriv.bRegUseLed = true;
break;
default:
padapter->ledpriv.LedStrategy = SW_LED_MODE0;
padapter->ledpriv.bRegUseLed = false;
break;
}
} else {
static int r871xu_drv_init(struct usb_interface *pusb_intf,
const struct usb_device_id *pdid)
{
uint status;
struct _adapter *padapter = NULL;
struct dvobj_priv *pdvobjpriv;
struct net_device *pnetdev;
struct usb_device *udev;
printk(KERN_INFO "r8712u: DriverVersion: %s\n", DRVER);
udev = interface_to_usbdev(pusb_intf);
usb_get_dev(udev);
pintf = pusb_intf;
pnetdev = r8712_init_netdev();
if (!pnetdev)
goto error;
padapter = netdev_priv(pnetdev);
disable_ht_for_spec_devid(pdid, padapter);
pdvobjpriv = &padapter->dvobjpriv;
pdvobjpriv->padapter = padapter;
padapter->dvobjpriv.pusbdev = udev;
padapter->pusb_intf = pusb_intf;
usb_set_intfdata(pusb_intf, pnetdev);
SET_NETDEV_DEV(pnetdev, &pusb_intf->dev);
padapter->dvobj_init = &r8712_usb_dvobj_init;
padapter->dvobj_deinit = &r8712_usb_dvobj_deinit;
padapter->halpriv.hal_bus_init = &r8712_usb_hal_bus_init;
padapter->dvobjpriv.inirp_init = &r8712_usb_inirp_init;
padapter->dvobjpriv.inirp_deinit = &r8712_usb_inirp_deinit;
if (padapter->dvobj_init == NULL)
goto error;
else {
status = padapter->dvobj_init(padapter);
if (status != _SUCCESS)
goto error;
}
status = r8712_init_drv_sw(padapter);
if (status == _FAIL)
goto error;
{
int i, offset;
u8 mac[6];
u8 tmpU1b, AutoloadFail, eeprom_CustomerID;
u8 *pdata = padapter->eeprompriv.efuse_eeprom_data;
tmpU1b = r8712_read8(padapter, EE_9346CR);
printk(KERN_INFO "r8712u: Boot from %s: Autoload %s\n",
(tmpU1b & _9356SEL) ? "EEPROM" : "EFUSE",
(tmpU1b & _EEPROM_EN) ? "OK" : "Failed");
if (tmpU1b & _EEPROM_EN) {
AutoloadFail = true;
tmpU1b = r8712_read8(padapter, EFUSE_TEST+3);
r8712_write8(padapter, EFUSE_TEST + 3, tmpU1b | 0x80);
msleep(20);
r8712_write8(padapter, EFUSE_TEST + 3,
(tmpU1b & (~BIT(7))));
tmpU1b = (u8)((r8712_read32(padapter, PMC_FSM) >> 15) &
0x1F);
if (tmpU1b == 0x3)
padapter->registrypriv.chip_version =
RTL8712_3rdCUT;
else
padapter->registrypriv.chip_version =
(tmpU1b >> 1) + 1;
switch (padapter->registrypriv.chip_version) {
case RTL8712_1stCUT:
case RTL8712_2ndCUT:
case RTL8712_3rdCUT:
break;
default:
padapter->registrypriv.chip_version =
RTL8712_2ndCUT;
break;
}
for (i = 0, offset = 0; i < 128; i += 8, offset++)
r8712_efuse_pg_packet_read(padapter, offset,
&pdata[i]);
if (r8712_initmac) {
int jj, kk;
for (jj = 0, kk = 0; jj < ETH_ALEN;
jj++, kk += 3)
mac[jj] =
key_2char2num(r8712_initmac[kk],
r8712_initmac[kk + 1]);
} else {
memcpy(mac, &pdata[0x12], ETH_ALEN);
}
eeprom_CustomerID = pdata[0x52];
switch (eeprom_CustomerID) {
case EEPROM_CID_ALPHA:
padapter->eeprompriv.CustomerID =
RT_CID_819x_ALPHA;
break;
case EEPROM_CID_CAMEO:
padapter->eeprompriv.CustomerID =
RT_CID_819x_CAMEO;
break;
case EEPROM_CID_SITECOM:
padapter->eeprompriv.CustomerID =
RT_CID_819x_Sitecom;
break;
case EEPROM_CID_COREGA:
padapter->eeprompriv.CustomerID =
RT_CID_COREGA;
break;
case EEPROM_CID_Senao:
padapter->eeprompriv.CustomerID =
RT_CID_819x_Senao;
break;
case EEPROM_CID_EDIMAX_BELKIN:
padapter->eeprompriv.CustomerID =
RT_CID_819x_Edimax_Belkin;
break;
case EEPROM_CID_SERCOMM_BELKIN:
padapter->eeprompriv.CustomerID =
RT_CID_819x_Sercomm_Belkin;
break;
case EEPROM_CID_WNC_COREGA:
padapter->eeprompriv.CustomerID =
RT_CID_819x_WNC_COREGA;
break;
case EEPROM_CID_WHQL:
break;
case EEPROM_CID_NetCore:
padapter->eeprompriv.CustomerID =
RT_CID_819x_Netcore;
break;
case EEPROM_CID_CAMEO1:
padapter->eeprompriv.CustomerID =
RT_CID_819x_CAMEO1;
break;
case EEPROM_CID_CLEVO:
padapter->eeprompriv.CustomerID =
RT_CID_819x_CLEVO;
break;
default:
padapter->eeprompriv.CustomerID =
RT_CID_DEFAULT;
break;
}
printk(KERN_INFO "r8712u: CustomerID = 0x%.4x\n",
padapter->eeprompriv.CustomerID);
switch (padapter->eeprompriv.CustomerID) {
case RT_CID_DEFAULT:
case RT_CID_819x_ALPHA:
case RT_CID_819x_CAMEO:
padapter->ledpriv.LedStrategy = SW_LED_MODE1;
padapter->ledpriv.bRegUseLed = true;
break;
case RT_CID_819x_Sitecom:
padapter->ledpriv.LedStrategy = SW_LED_MODE2;
padapter->ledpriv.bRegUseLed = true;
break;
case RT_CID_COREGA:
case RT_CID_819x_Senao:
padapter->ledpriv.LedStrategy = SW_LED_MODE3;
padapter->ledpriv.bRegUseLed = true;
break;
case RT_CID_819x_Edimax_Belkin:
padapter->ledpriv.LedStrategy = SW_LED_MODE4;
padapter->ledpriv.bRegUseLed = true;
break;
case RT_CID_819x_Sercomm_Belkin:
padapter->ledpriv.LedStrategy = SW_LED_MODE5;
padapter->ledpriv.bRegUseLed = true;
break;
case RT_CID_819x_WNC_COREGA:
padapter->ledpriv.LedStrategy = SW_LED_MODE6;
padapter->ledpriv.bRegUseLed = true;
break;
default:
padapter->ledpriv.LedStrategy = SW_LED_MODE0;
padapter->ledpriv.bRegUseLed = false;
break;
}
} else
