/**
* Parse the incoming command line and put resulting parameters in to the state
*
* @param argc Number of arguments in command line
* @param argv Array of pointers to strings from command line
* @param state Pointer to state structure to assign any discovered parameters to
* @return non-0 if failed for some reason, 0 otherwise
*/
static int parse_cmdline(int argc, const char **argv, RASPISTILLYUV_STATE *state)
{
// Parse the command line arguments.
// We are looking for --<something> or -<abreviation of something>
int valid = 1; // set 0 if we have a bad parameter
int i;
for (i = 1; i < argc && valid; i++)
{
int command_id, num_parameters;
if (!argv[i])
continue;
if (argv[i][0] != '-')
{
valid = 0;
continue;
}
// Assume parameter is valid until proven otherwise
valid = 1;
command_id = raspicli_get_command_id(cmdline_commands, cmdline_commands_size, &argv[i][1], &num_parameters);
// If we found a command but are missing a parameter, continue (and we will drop out of the loop)
if (command_id != -1 && num_parameters > 0 && (i + 1 >= argc) )
continue;
// We are now dealing with a command line option
switch (command_id)
{
case CommandHelp:
display_valid_parameters(basename(argv[0]));
return -1;
case CommandWidth: // Width > 0
if (sscanf(argv[i + 1], "%u", &state->width) != 1)
valid = 0;
else
i++;
break;
case CommandHeight: // Height > 0
if (sscanf(argv[i + 1], "%u", &state->height) != 1)
valid = 0;
else
i++;
break;
case CommandOutput: // output filename
{
int len = strlen(argv[i + 1]);
if (len)
{
state->filename = malloc(len + 10); // leave enough space for any timelapse generated changes to filename
vcos_assert(state->filename);
if (state->filename)
strncpy(state->filename, argv[i + 1], len+1);
i++;
}
else
valid = 0;
break;
}
case CommandLink :
{
int len = strlen(argv[i+1]);
if (len)
{
state->linkname = malloc(len + 10);
vcos_assert(state->linkname);
if (state->linkname)
strncpy(state->linkname, argv[i + 1], len+1);
i++;
}
else
valid = 0;
break;
}
case CommandVerbose: // display lots of data during run
state->verbose = 1;
break;
case CommandTimeout: // Time to run viewfinder for before taking picture, in seconds
{
if (sscanf(argv[i + 1], "%u", &state->timeout) == 1)
{
// Ensure that if previously selected CommandKeypress we don't overwrite it
if (state->timeout == 0 && state->frameNextMethod == FRAME_NEXT_SINGLE)
state->frameNextMethod = FRAME_NEXT_FOREVER;
i++;
}
else
valid = 0;
break;
}
case CommandTimelapse:
if (sscanf(argv[i + 1], "%u", &state->timelapse) != 1)
valid = 0;
else
{
if (state->timelapse)
state->frameNextMethod = FRAME_NEXT_TIMELAPSE;
else
state->frameNextMethod = FRAME_NEXT_IMMEDIATELY;
i++;
}
break;
case CommandUseRGB: // display lots of data during run
state->useRGB = 1;
break;
case CommandCamSelect: //Select camera input port
{
if (sscanf(argv[i + 1], "%u", &state->cameraNum) == 1)
{
i++;
}
else
valid = 0;
break;
}
case CommandFullResPreview:
state->fullResPreview = 1;
break;
case CommandKeypress: // Set keypress between capture mode
state->frameNextMethod = FRAME_NEXT_KEYPRESS;
break;
case CommandSignal: // Set SIGUSR1 between capture mode
state->frameNextMethod = FRAME_NEXT_SIGNAL;
// Reenable the signal
signal(SIGUSR1, signal_handler);
break;
case CommandSettings:
state->settings = 1;
break;
case CommandBurstMode:
state->burstCaptureMode=1;
break;
default:
{
// Try parsing for any image specific parameters
// result indicates how many parameters were used up, 0,1,2
// but we adjust by -1 as we have used one already
const char *second_arg = (i + 1 < argc) ? argv[i + 1] : NULL;
int parms_used = (raspicamcontrol_parse_cmdline(&state->camera_parameters, &argv[i][1], second_arg));
// Still unused, try preview options
if (!parms_used)
parms_used = raspipreview_parse_cmdline(&state->preview_parameters, &argv[i][1], second_arg);
// If no parms were used, this must be a bad parameters
if (!parms_used)
valid = 0;
else
i += parms_used - 1;
break;
}
}
}
if (!valid)
{
fprintf(stderr, "Invalid command line option (%s)\n", argv[i-1]);
return 1;
}
return 0;
}
/**
* Parse the incoming command line and put resulting parameters in to the state
*
* @param argc Number of arguments in command line
* @param argv Array of pointers to strings from command line
* @param state Pointer to state structure to assign any discovered parameters to
* @return non-0 if failed for some reason, 0 otherwise
*/
static int parse_cmdline(int argc, const char **argv, RASPISTILL_STATE *state)
{
// Parse the command line arguments.
// We are looking for --<something> or -<abreviation of something>
int valid = 1;
int i;
for (i = 1; i < argc && valid; i++)
{
int command_id, num_parameters;
if (!argv[i])
continue;
if (argv[i][0] != '-')
{
valid = 0;
continue;
}
// Assume parameter is valid until proven otherwise
valid = 1;
command_id = raspicli_get_command_id(cmdline_commands, cmdline_commands_size, &argv[i][1], &num_parameters);
// If we found a command but are missing a parameter, continue (and we will drop out of the loop)
if (command_id != -1 && num_parameters > 0 && (i + 1 >= argc) )
continue;
// We are now dealing with a command line option
switch (command_id)
{
case CommandHelp:
display_valid_parameters(basename(argv[0]));
// exit straight away if help requested
return -1;
case CommandWidth: // Width > 0
if (sscanf(argv[i + 1], "%u", &state->width) != 1)
valid = 0;
else
i++;
break;
case CommandHeight: // Height > 0
if (sscanf(argv[i + 1], "%u", &state->height) != 1)
valid = 0;
else
i++;
break;
case CommandQuality: // Quality = 1-100
if (sscanf(argv[i + 1], "%u", &state->quality) == 1)
{
if (state->quality > 100)
{
fprintf(stderr, "Setting max quality = 100\n");
state->quality = 100;
}
i++;
}
else
valid = 0;
break;
case CommandRaw: // Add raw bayer data in metadata
state->wantRAW = 1;
break;
case CommandOutput: // output filename
{
int len = strlen(argv[i + 1]);
if (len)
{
state->filename = malloc(len + 10); // leave enough space for any timelapse generated changes to filename
vcos_assert(state->filename);
if (state->filename)
strncpy(state->filename, argv[i + 1], len);
i++;
}
else
valid = 0;
break;
}
case CommandLink :
{
int len = strlen(argv[i+1]);
if (len)
{
state->linkname = malloc(len + 10);
vcos_assert(state->linkname);
if (state->linkname)
strncpy(state->linkname, argv[i + 1], len);
i++;
}
else
valid = 0;
break;
}
case CommandVerbose: // display lots of data during run
state->verbose = 1;
break;
case CommandTimeout: // Time to run viewfinder for before taking picture, in seconds
{
if (sscanf(argv[i + 1], "%u", &state->timeout) == 1)
{
// TODO : What limits do we need for timeout?
i++;
}
else
valid = 0;
break;
}
case CommandThumbnail : // thumbnail parameters - needs string "x:y:quality"
sscanf(argv[i + 1], "%d:%d:%d", &state->thumbnailConfig.width,&state->thumbnailConfig.height,
&state->thumbnailConfig.quality);
i++;
break;
case CommandDemoMode: // Run in demo mode - no capture
{
// Demo mode might have a timing parameter
// so check if a) we have another parameter, b) its not the start of the next option
if (i + 1 < argc && argv[i+1][0] != '-')
{
if (sscanf(argv[i + 1], "%u", &state->demoInterval) == 1)
{
// TODO : What limits do we need for timeout?
state->demoMode = 1;
i++;
}
else
valid = 0;
}
else
{
state->demoMode = 1;
}
break;
}
case CommandEncoding :
{
int len = strlen(argv[i + 1]);
valid = 0;
if (len)
{
int j;
for (j=0;j<encoding_xref_size;j++)
{
if (strcmp(encoding_xref[j].format, argv[i+1]) == 0)
{
state->encoding = encoding_xref[j].encoding;
valid = 1;
i++;
break;
}
}
}
break;
}
case CommandExifTag:
store_exif_tag(state, argv[i+1]);
i++;
break;
case CommandTimelapse:
if (sscanf(argv[i + 1], "%u", &state->timelapse) != 1)
valid = 0;
else
i++;
break;
case CommandFullResPreview:
state->fullResPreview = 1;
break;
default:
{
// Try parsing for any image specific parameters
// result indicates how many parameters were used up, 0,1,2
// but we adjust by -1 as we have used one already
const char *second_arg = (i + 1 < argc) ? argv[i + 1] : NULL;
int parms_used = raspicamcontrol_parse_cmdline(&state->camera_parameters, &argv[i][1], second_arg);
// Still unused, try preview options
if (!parms_used)
parms_used = raspipreview_parse_cmdline(&state->preview_parameters, &argv[i][1], second_arg);
// If no parms were used, this must be a bad parameters
if (!parms_used)
valid = 0;
else
i += parms_used - 1;
break;
}
}
}
if (!valid)
{
fprintf(stderr, "Invalid command line option (%s)\n", argv[i]);
return 1;
}
return 0;
}
/**
* Parse the incoming command line and put resulting parameters in to the state
*
* @param argc Number of arguments in command line
* @param argv Array of pointers to strings from command line
* @param state Pointer to state structure to assign any discovered parameters to
* @return Non-0 if failed for some reason, 0 otherwise
*/
static int parse_cmdline(int argc, const char **argv, RASPIVID_STATE *state)
{
// Parse the command line arguments.
// We are looking for --<something> or -<abreviation of something>
int valid = 1;
int i;
for (i = 1; i < argc && valid; i++)
{
int command_id, num_parameters;
if (!argv[i])
continue;
if (argv[i][0] != '-')
{
valid = 0;
continue;
}
// Assume parameter is valid until proven otherwise
valid = 1;
command_id = raspicli_get_command_id(cmdline_commands, cmdline_commands_size, &argv[i][1], &num_parameters);
// If we found a command but are missing a parameter, continue (and we will drop out of the loop)
if (command_id != -1 && num_parameters > 0 && (i + 1 >= argc) )
continue;
// We are now dealing with a command line option
switch (command_id)
{
case CommandHelp:
display_valid_parameters(basename(argv[0]));
return -1;
case CommandWidth: // Width > 0
if (sscanf(argv[i + 1], "%u", &state->width) != 1)
valid = 0;
else
i++;
break;
case CommandHeight: // Height > 0
if (sscanf(argv[i + 1], "%u", &state->height) != 1)
valid = 0;
else
i++;
break;
case CommandBitrate: // 1-100
if (sscanf(argv[i + 1], "%u", &state->bitrate) == 1)
{
if (state->bitrate > MAX_BITRATE)
{
state->bitrate = MAX_BITRATE;
}
i++;
}
else
valid = 0;
break;
case CommandOutput: // output filename
{
int len = strlen(argv[i + 1]);
if (len)
{
state->filename = malloc(len + 1);
vcos_assert(state->filename);
if (state->filename)
strncpy(state->filename, argv[i + 1], len);
i++;
}
else
valid = 0;
break;
}
case CommandVerbose: // display lots of data during run
state->verbose = 1;
break;
case CommandTimeout: // Time to run viewfinder/capture
{
if (sscanf(argv[i + 1], "%u", &state->timeout) == 1)
{
// TODO : What limits do we need for timeout?
i++;
}
else
valid = 0;
break;
}
case CommandDemoMode: // Run in demo mode - no capture
{
// Demo mode might have a timing parameter
// so check if a) we have another parameter, b) its not the start of the next option
if (i + 1 < argc && argv[i+1][0] != '-')
{
if (sscanf(argv[i + 1], "%u", &state->demoInterval) == 1)
{
// TODO : What limits do we need for timeout?
if (state->demoInterval == 0)
state->demoInterval = 250; // ms
state->demoMode = 1;
i++;
}
else
valid = 0;
}
else
{
state->demoMode = 1;
}
break;
}
case CommandFramerate: // fps to record
{
if (sscanf(argv[i + 1], "%u", &state->framerate) == 1)
{
// TODO : What limits do we need for fps 1 - 30 - 120??
i++;
}
else
valid = 0;
break;
}
case CommandPreviewEnc:
state->immutableInput = 0;
break;
case CommandIntraPeriod: // key frame rate
{
if (sscanf(argv[i + 1], "%u", &state->intraperiod) == 1)
i++;
else
valid = 0;
break;
}
default:
{
// Try parsing for any image specific parameters
// result indicates how many parameters were used up, 0,1,2
// but we adjust by -1 as we have used one already
const char *second_arg = (i + 1 < argc) ? argv[i + 1] : NULL;
int parms_used = (raspicamcontrol_parse_cmdline(&state->camera_parameters, &argv[i][1], second_arg));
// Still unused, try preview options
if (!parms_used)
parms_used = raspipreview_parse_cmdline(&state->preview_parameters, &argv[i][1], second_arg);
// If no parms were used, this must be a bad parameters
if (!parms_used)
valid = 0;
else
i += parms_used - 1;
break;
}
}
}
if (!valid)
{
fprintf(stderr, "Invalid command line option (%s)\n", argv[i]);
return 1;
}
// Always disable verbose if output going to stdout
if (state->filename && state->filename[0] == '-')
{
state->verbose = 0;
}
return 0;
}
/**
* Parse the incoming command line and put resulting parameters in to the state
*
* @param argc Number of arguments in command line
* @param argv Array of pointers to strings from command line
* @param state Pointer to state structure to assign any discovered parameters to
* @return 0 if failed for some reason, non-0 otherwise
*/
static int parse_cmdline(int argc, const char **argv, RASPISTILLYUV_STATE *state)
{
// Parse the command line arguments.
// We are looking for --<something> or -<abreviation of something>
int valid = 1; // set 0 if we have a bad parameter
int i;
for (i = 1; i < argc && valid; i++)
{
int command_id, num_parameters;
if (!argv[i])
continue;
if (argv[i][0] != '-')
{
valid = 0;
continue;
}
// Assume parameter is valid until proven otherwise
valid = 1;
command_id = raspicli_get_command_id(cmdline_commands, cmdline_commands_size, &argv[i][1], &num_parameters);
// If we found a command but are missing a parameter, continue (and we will drop out of the loop)
if (command_id != -1 && num_parameters > 0 && (i + 1 >= argc) )
continue;
// We are now dealing with a command line option
switch (command_id)
{
case CommandHelp:
display_valid_parameters();
break;
case CommandWidth: // Width > 0
if (sscanf(argv[i + 1], "%u", &state->width) != 1)
valid = 0;
else
i++;
break;
case CommandHeight: // Height > 0
if (sscanf(argv[i + 1], "%u", &state->height) != 1)
valid = 0;
else
i++;
break;
case CommandOutput: // output filename
{
int len = strlen(argv[i + 1]);
if (len)
{
state->filename = malloc(len + 1);
vcos_assert(state->filename);
if (state->filename)
strncpy(state->filename, argv[i + 1], len);
i++;
}
else
valid = 0;
break;
}
case CommandVerbose: // display lots of data during run
state->verbose = 1;
break;
case CommandTimeout: // Time to run viewfinder for before taking picture, in seconds
{
if (sscanf(argv[i + 1], "%u", &state->timeout) == 1)
{
// TODO : What limits do we need for timeout?
i++;
}
else
valid = 0;
break;
}
default:
{
// Try parsing for any image specific parameters
// result indicates how many parameters were used up, 0,1,2
// but we adjust by -1 as we have used one already
const char *second_arg = (i + 1 < argc) ? argv[i + 1] : NULL;
int parms_used = (raspicamcontrol_parse_cmdline(&state->camera_parameters, &argv[i][1], second_arg));
// Still unused, try preview options
if (!parms_used)
parms_used = raspipreview_parse_cmdline(&state->preview_parameters, &argv[i][1], second_arg);
// If no parms were used, this must be a bad parameters
if (!parms_used)
valid = 0;
else
i += parms_used - 1;
break;
}
}
}
if (!valid)
{
printf("Invalid command line option (%s)\n", argv[i]);
return 1;
}
return 0;
}
int catcierge_parse_setting(catcierge_args_t *args, const char *key, char **values, size_t value_count)
{
size_t i;
int ret;
assert(args);
assert(key);
if (!strcmp(key, "matcher"))
{
if (value_count == 1)
{
args->matcher = values[0];
if (strcmp(args->matcher, "template")
&& strcmp(args->matcher, "haar"))
{
fprintf(stderr, "Invalid template type \"%s\"\n", args->matcher);
return -1;
}
args->matcher_type = !strcmp(args->matcher, "template")
? MATCHER_TEMPLATE : MATCHER_HAAR;
return 0;
}
else
{
fprintf(stderr, "Missing value for --matcher\n");
return -1;
}
return 0;
}
ret = catcierge_haar_matcher_parse_args(&args->haar, key, values, value_count);
if (ret < 0) return -1;
else if (!ret) return 0;
ret = catcierge_template_matcher_parse_args(&args->templ, key, values, value_count);
if (ret < 0) return -1;
else if (!ret) return 0;
if (!strcmp(key, "show"))
{
args->show = 1;
if (value_count == 1) args->show = atoi(values[0]);
return 0;
}
if (!strcmp(key, "ok_matches_needed"))
{
if (value_count == 1)
{
args->ok_matches_needed = atoi(values[0]);
if ((args->ok_matches_needed < 0)
|| (args->ok_matches_needed > MATCH_MAX_COUNT))
{
fprintf(stderr, "--ok_matches_needed must be between 0 and %d\n", MATCH_MAX_COUNT);
return -1;
}
return 0;
}
fprintf(stderr, "--ok_matches_needed missing an integer value\n");
return -1;
}
if (!strcmp(key, "lockout_method"))
{
if (value_count == 1)
{
args->lockout_method = atoi(values[0]);
if ((args->lockout_method < OBSTRUCT_OR_TIMER_1)
|| (args->lockout_method > TIMER_ONLY_3))
{
fprintf(stderr, "--lockout_method needs a value between %d and %d\n",
OBSTRUCT_OR_TIMER_1, TIMER_ONLY_3);
return -1;
}
return 0;
}
fprintf(stderr, "--lockout_method missing an integer value\n");
return -1;
}
if (!strcmp(key, "save"))
{
args->saveimg = 1;
if (value_count == 1) args->saveimg = atoi(values[0]);
return 0;
}
if (!strcmp(key, "save_obstruct"))
{
args->save_obstruct_img = 1;
if (value_count == 1) args->save_obstruct_img = atoi(values[0]);
return 0;
}
if (!strcmp(key, "new_execute"))
{
args->new_execute = 1;
if (value_count == 1) args->new_execute = atoi(values[0]);
return 0;
}
if (!strcmp(key, "highlight"))
{
args->highlight_match = 1;
if (value_count == 1) args->highlight_match = atoi(values[0]);
return 0;
}
if (!strcmp(key, "lockout"))
{
args->lockout_time = DEFAULT_LOCKOUT_TIME;
if (value_count == 1) args->lockout_time = atoi(values[0]);
return 0;
}
if (!strcmp(key, "lockout_error_delay"))
{
if (value_count == 1)
{
args->consecutive_lockout_delay = atof(values[0]);
return 0;
}
fprintf(stderr, "--lockout_error_delay missing a seconds value\n");
return -1;
}
if (!strcmp(key, "lockout_error"))
{
if (value_count == 1)
{
args->max_consecutive_lockout_count = atoi(values[0]);
return 0;
}
fprintf(stderr, "--lockout_error missing a value\n");
return -1;
}
if (!strcmp(key, "lockout_dummy"))
{
args->lockout_dummy = 1;
if (value_count == 1) args->lockout_dummy = atoi(values[0]);
return 0;
}
if (!strcmp(key, "matchtime"))
{
args->match_time = DEFAULT_MATCH_WAIT;
if (value_count == 1) args->match_time = atoi(values[0]);
return 0;
}
if (!strcmp(key, "no_final_decision"))
{
args->no_final_decision = 1;
if (value_count == 1) args->no_final_decision = atoi(values[0]);
return 0;
}
#ifdef WITH_ZMQ
if (!strcmp(key, "zmq"))
{
args->zmq = 1;
if (value_count == 1) args->zmq = atoi(values[0]);
return 0;
}
if (!strcmp(key, "zmq_port"))
{
args->zmq_port = DEFAULT_ZMQ_PORT;
if (value_count < 1)
{
fprintf(stderr, "--zmq_port missing value\n");
return -1;
}
args->zmq_port = atoi(values[0]);
return 0;
}
if (!strcmp(key, "zmq_iface"))
{
if (value_count < 1)
{
fprintf(stderr, "--zmq_iface missing interface name\n");
return -1;
}
args->zmq_iface = values[0];
return 0;
}
if (!strcmp(key, "zmq_transport"))
{
if (value_count != 1)
{
fprintf(stderr, "--zmq_transport missing value\n");
return -1;
}
args->zmq_transport = values[0];
return 0;
}
#endif // WITH_ZMQ
if (!strcmp(key, "output") || !strcmp(key, "output_path"))
{
if (value_count == 1)
{
args->output_path = values[0];
return 0;
}
fprintf(stderr, "--output_path missing path value\n");
return -1;
}
if (!strcmp(key, "match_output_path"))
{
if (value_count == 1)
{
args->match_output_path = values[0];
return 0;
}
fprintf(stderr, "--match_output_path missing path value\n");
return -1;
}
if (!strcmp(key, "steps_output_path"))
{
if (value_count == 1)
{
args->steps_output_path = values[0];
return 0;
}
fprintf(stderr, "--steps_output_path missing path value\n");
return -1;
}
if (!strcmp(key, "obstruct_output_path"))
{
if (value_count == 1)
{
args->obstruct_output_path = values[0];
return 0;
}
fprintf(stderr, "--obstruct_output_path missing path value\n");
return -1;
}
if (!strcmp(key, "template_output_path"))
{
if (value_count == 1)
{
args->template_output_path = values[0];
return 0;
}
fprintf(stderr, "--template_output_path missing path value\n");
return -1;
}
if (!strcmp(key, "input") || !strcmp(key, "template"))
{
if (value_count == 0)
{
fprintf(stderr, "--template missing value\n");
return -1;
}
for (i = 0; i < value_count; i++)
{
if (args->input_count >= MAX_INPUT_TEMPLATES)
{
fprintf(stderr, "Max template input reached %d\n", MAX_INPUT_TEMPLATES);
return -1;
}
args->inputs[args->input_count] = values[i];
args->input_count++;
}
return 0;
}
#ifdef WITH_RFID
if (!strcmp(key, "rfid_in"))
{
if (value_count == 1)
{
args->rfid_inner_path = values[0];
return 0;
}
fprintf(stderr, "--rfid_in missing path value\n");
return -1;
}
if (!strcmp(key, "rfid_out"))
{
if (value_count == 1)
{
args->rfid_outer_path = values[0];
return 0;
}
fprintf(stderr, "--rfid_out missing path value\n");
return -1;
}
if (!strcmp(key, "rfid_allowed"))
{
if (value_count == 1)
{
if (catcierge_create_rfid_allowed_list(args, values[0]))
{
CATERR("Failed to create RFID allowed list\n");
return -1;
}
return 0;
}
fprintf(stderr, "--rfid_allowed missing comma separated list of values\n");
return -1;
}
if (!strcmp(key, "rfid_time"))
{
if (value_count == 1)
{
args->rfid_lock_time = (double)atof(values[0]);
return 0;
}
fprintf(stderr, "--rfid_time missing seconds value (float)\n");
return -1;
}
if (!strcmp(key, "rfid_lock"))
{
args->lock_on_invalid_rfid = 1;
if (value_count == 1) args->lock_on_invalid_rfid = atoi(values[0]);
return 0;
}
#endif // WITH_RFID
if (!strcmp(key, "log"))
{
if (value_count == 1)
{
args->log_path = values[0];
return 0;
}
fprintf(stderr, "--log missing path value\n");
return -1;
}
if (!strcmp(key, "match_cmd"))
{
if (value_count == 1)
{
args->match_cmd = values[0];
return 0;
}
fprintf(stderr, "--match_cmd missing value\n");
return -1;
}
if (!strcmp(key, "save_img_cmd"))
{
if (value_count == 1)
{
args->save_img_cmd = values[0];
return 0;
}
fprintf(stderr, "--save_img_cmd missing value\n");
return -1;
}
if (!strcmp(key, "frame_obstructed_cmd"))
{
if (value_count == 1)
{
args->frame_obstructed_cmd = values[0];
return 0;
}
fprintf(stderr, "--frame_obstructed_cmd missing value\n");
return -1;
}
if (!strcmp(key, "save_imgs_cmd") || !strcmp(key, "match_group_done_cmd"))
{
if (value_count == 1)
{
args->match_group_done_cmd = values[0];
return 0;
}
fprintf(stderr, "--match_group_done_cmd missing value\n");
return -1;
}
if (!strcmp(key, "match_done_cmd"))
{
if (value_count == 1)
{
args->match_done_cmd = values[0];
return 0;
}
fprintf(stderr, "--match_done_cmd missing value\n");
return -1;
}
if (!strcmp(key, "do_lockout_cmd"))
{
if (value_count == 1)
{
args->do_lockout_cmd = values[0];
return 0;
}
fprintf(stderr, "--do_lockout_cmd missing value\n");
return -1;
}
if (!strcmp(key, "do_unlock_cmd"))
{
if (value_count == 1)
{
args->do_unlock_cmd = values[0];
return 0;
}
fprintf(stderr, "--do_unlock cmd missing value\n");
return -1;
}
if (!strcmp(key, "state_change_cmd"))
{
if (value_count == 1)
{
args->state_change_cmd = values[0];
return 0;
}
fprintf(stderr, "--state_change_cmd cmd missing value\n");
return -1;
}
if (!strcmp(key, "nocolor"))
{
args->nocolor = 1;
if (value_count == 1) args->nocolor = atoi(values[0]);
return 0;
}
if (!strcmp(key, "noanim"))
{
args->noanim = 1;
if (value_count == 1) args->noanim = atoi(values[0]);
return 0;
}
if (!strcmp(key, "save_steps"))
{
args->save_steps = 1;
if (value_count == 1) args->save_steps = atoi(values[0]);
return 0;
}
if (!strcmp(key, "chuid"))
{
if (value_count == 1)
{
args->chuid = values[0];
return 0;
}
fprintf(stderr, "--chuid missing value\n");
return -1;
}
#ifdef WITH_RFID
if (!strcmp(key, "rfid_detect_cmd"))
{
if (value_count == 1)
{
args->rfid_detect_cmd = values[0];
return 0;
}
fprintf(stderr, "--rfid_detect_cmd missing value\n");
return -1;
}
if (!strcmp(key, "rfid_match_cmd"))
{
if (value_count == 1)
{
args->rfid_match_cmd = values[0];
return 0;
}
fprintf(stderr, "--rfid_match_cmd missing value\n");
return -1;
}
#endif // WITH_RFID
#ifndef _WIN32
// TODO: Support this on windows.
if (!strcmp(key, "base_time"))
{
if (value_count == 1)
{
struct tm base_time_tm;
time_t base_time_t;
struct timeval base_time_now;
long base_time_diff;
memset(&base_time_tm, 0, sizeof(base_time_tm));
memset(&base_time_now, 0, sizeof(base_time_now));
args->base_time = values[0];
if (!strptime(args->base_time, "%Y-%m-%dT%H:%M:%S", &base_time_tm))
{
goto fail_base_time;
}
if ((base_time_t = mktime(&base_time_tm)) == -1)
{
goto fail_base_time;
}
gettimeofday(&base_time_now, NULL);
base_time_diff = base_time_now.tv_sec - base_time_t;
catcierge_strftime_set_base_diff(base_time_diff);
return 0;
fail_base_time:
fprintf(stderr, "Failed to parse --base_time %s\n", values[0]);
return -1;
}
fprintf(stderr, "--base_time missing value\n");
return -1;
}
#endif // _WIN32
#ifdef RPI
if (!strncmp(key, "rpi-", 4))
{
int rpiret = 0;
const char *rpikey = key + strlen("rpi");
if (!raspicamcontrol_parse_cmdline(&args->rpi_settings.camera_parameters,
rpikey, (value_count == 1) ? values[0] : NULL))
{
return -1;
}
return 0;
}
#endif // RPI
return -1;
}
