void main(void)
{
halMcuInit();
hal_led_init();
hal_uart_init();
//Uart0Init(0, 0);
printf("s rssi: d\r\n");
//Uart0Init(unsigned char StopBits,unsigned char Parity)
if (FAILED == halRfInit()) {
HAL_ASSERT(FALSE);
}
// Config basicRF
basicRfConfig.panId = PAN_ID;
basicRfConfig.channel = RF_CHANNEL;
basicRfConfig.ackRequest = TRUE;
#ifdef SECURITY_CCM
basicRfConfig.securityKey = key;
#endif
// Initialize BasicRF
#if NODE_TYPE
basicRfConfig.myAddr = SEND_ADDR;
#else
basicRfConfig.myAddr = RECV_ADDR;
#endif
if(basicRfInit(&basicRfConfig)==FAILED) {
HAL_ASSERT(FALSE);
}
#if NODE_TYPE
//uWaveInit();
dht11_io_init();
rfSendData();
#else
rfRecvData();
#endif
}
void main(void)
{
halMcuInit();
hal_led_init();
hal_uart_init();
printf("你知道串口是正常的.....\r\n");
if (FAILED == halRfInit()) {
HAL_ASSERT(FALSE);
}
// Config basicRF
basicRfConfig.panId = PAN_ID;
basicRfConfig.channel = RF_CHANNEL;
basicRfConfig.ackRequest = TRUE;
#ifdef SECURITY_CCM
basicRfConfig.securityKey = key;
#endif
// Initialize BasicRF
#if NODE_TYPE
basicRfConfig.myAddr = SEND_ADDR;
#else
basicRfConfig.myAddr = RECV_ADDR;
#endif
if(basicRfInit(&basicRfConfig)==FAILED) {
HAL_ASSERT(FALSE);
}
#if NODE_TYPE
dht11_io_init();
InitialT1test();
rfSendData();
#else
printf("接收数据\r\n");
rfRecvData();
#endif
}
/**
* \brief Parse user entered command and process it
*
* \param [in] Data User entered command with parameters
* \param [in] Length Length of command
* \return void
*
*/
void ProcessATCommand(char *Data, uint8_t Length)
{
char * Parameters = strchr(Data, ':');
uint8_t ParametersPos = 0x00;
if (Parameters == NULL)
{
dxprintf("Len: %d, no params\n", Length);
}
else
{
ParametersPos = Parameters - Data;
dxprintf("Len: %d, Params: %d\n", Length, ParametersPos);
}
int CommandProcessed = 0;
/**
* CMD: PING - ping myself
*/
if (strncmp(&Data[3], (char *)"PING", 4) == 0)
{
CmdPING();
CommandProcessed = 1;
}
/**
* CMD: FIND_NEW_DEVICE or FIND - find new device. Device should be able to accept 'discover' command.
*/
if (strncmp(&Data[3], (char *)"FIND_NEW_DEVICE", 15) == 0 ||
strncmp(&Data[3], (char *)"FIND", 4) == 0)
{
CmdFindNewDevice();
CommandProcessed = 1;
}
/**
* CMD: CHECK_TX_STATUS - Check current transmitter status
*/
if (strncmp(&Data[3], (char *)"CHECK_TX_STATUS", 15) == 0)
{
QueueResponse((char *)"<CHECK_TX_STATUS\n");
CmdCheckTxRxStatus(CHIP_Tx);
CommandProcessed = 1;
}
/**
* CMD: CHECK_RX_STATUS - Check current receiver status
*/
if (strncmp(&Data[3], (char *)"CHECK_RX_STATUS", 15) == 0)
{
QueueResponse((char *)"<CHECK_RX_STATUS\n");
CmdCheckTxRxStatus(CHIP_Rx);
CommandProcessed = 1;
}
/**
* CMD: HANDLE_TX_STATUS - Check and handle current transmitter status
*/
if (strncmp(&Data[3], (char *)"HANDLE_TX_STATUS", 16) == 0)
{
QueueResponse((char *)"<HANDLE_TX_STATUS\n");
CmdHandleTxRxStatus(CHIP_Tx);
CommandProcessed = 1;
}
/**
* CMD: HANDLE_RX_STATUS - Check and handle current receiver status
*/
if (strncmp(&Data[3], (char *)"HANDLE_RX_STATUS", 16) == 0)
{
QueueResponse((char *)"<HANDLE_RX_STATUS\n");
CmdHandleTxRxStatus(CHIP_Rx);
CommandProcessed = 1;
}
/**
* CMD: ADD_DEVICE - Add new device into device list. This command doesn't send any data to device.
*/
if (strncmp(&Data[3], (char *)"ADD_DEVICE", 10) == 0)
{
QueueResponse((char *)"<ADD_DEVICE\n");
rfCreateDevice();
CommandProcessed = 1;
}
/**
* CMD: LIST_DEVICES - print loaded devices
*/
if (strncmp(&Data[3], (char *)"LIST_DEVICES", 12) == 0)
{
QueueResponse((char *)"<LIST_DEVICES\n");
rfListDevices();
CommandProcessed = 1;
}
/**
* CMD: SAVE_DEVICES - save current devices
*/
if (strncmp(&Data[3], (char *)"SAVE_DEVICES", 12) == 0)
{
QueueResponse((char *)"<SAVE_DEVICES\n");
rfSaveDevices();
QueueResponse((char *)"<DONE\n");
CommandProcessed = 1;
}
/**
* CMD: LOAD_DEVICES - load saved devices
*/
if (strncmp(&Data[3], (char *)"LOAD_DEVICES", 12) == 0)
{
QueueResponse((char *)"<LOAD_DEVICES\n");
rfLoadDevices();
rfListDevices();
QueueResponse((char *)"<DONE\n");
CommandProcessed = 1;
}
/**
* CMD: PREPARE_TEST_DEVICES - generate list of dummy devices
*/
if (strncmp(&Data[3], (char *)"PREPARE_TEST_DEVICES", 20) == 0)
{
QueueResponse((char *)"<PREPARE_TEST_DEVICES\n");
rfPrepareTestDevices();
QueueResponse((char *)"<DONE\n");
CommandProcessed = 1;
}
/**
* CMD: PING_DEVICE - ping one device
*/
if (strncmp(&Data[3], (char *)"PING_DEVICE", 11) == 0)
{
QueueResponse((char *)"***PING_DEVICE NOT IMPLEMENTED!!!***");
CommandProcessed = 1;
}
/**
* CMD: PING_ALL_DEVICES - ping all loaded devices
*/
if (strncmp(&Data[3], (char *)"PING_ALL_DEVICES", 16) == 0)
{
QueueResponse((char *)"<PING_ALL_DEVICES\n");
rfPingAllDevices();
QueueResponse((char *)"<DONE\n");
CommandProcessed = 1;
}
/**
* CMD: SELF_TEST - run self tests
*/
if (strncmp(&Data[3], (char *)"SELF_TEST", 9) == 0)
{
QueueResponse((char *)"***SELF_TEST NOT IMPLEMENTED!!!***");
CommandProcessed = 1;
}
/**
* CMD: SEND_DATA - send data to given device
*/
if (strncmp(&Data[3], (char *)"SEND_DATA", 9) == 0)
{
QueueResponse((char *)"<SEND_DATA\n");
char Parameters[Length - ParametersPos + 1];
int DevAddress = 0x00;
uint8_t ArgumentsLength = Length - ParametersPos - 6;
char Arguments[ArgumentsLength];
strlcpy(Parameters, &Data[ParametersPos + 1], Length - ParametersPos);
if (sscanf(Parameters, "%4x:%s", &DevAddress, Arguments) > 0)
{
dLink Device = rfGetDevice(DevAddress);
if (Device == NULL)
{
QueueResponse((char *)">ERROR: Device with given address not linked!\n\n");
}
else if (Device->Type == 0x00)
{
QueueResponse((char *)">ERROR: Device type not valid!\n\n");
}
else
{
rfSendData(rfCMD_W_DATA, Device, Arguments);
}
}
else
{
QueueResponse((char *)">ERROR: Device address not set!\n\n");
}
CommandProcessed = 1;
}
if (CommandProcessed == 0)
{
QueueResponse((char *)">ERROR: Unknown command!\n\n");
}
}
