void rtl_usb_disconnect(struct usb_interface *intf)
{
struct ieee80211_hw *hw = usb_get_intfdata(intf);
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *rtlmac = rtl_mac(rtl_priv(hw));
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
if (unlikely(!rtlpriv))
return;
/* just in case driver is removed before firmware callback */
wait_for_completion(&rtlpriv->firmware_loading_complete);
/*ieee80211_unregister_hw will call ops_stop */
if (rtlmac->mac80211_registered == 1) {
ieee80211_unregister_hw(hw);
rtlmac->mac80211_registered = 0;
} else {
rtl_deinit_deferred_work(hw);
rtlpriv->intf_ops->adapter_stop(hw);
}
/*deinit rfkill */
/* rtl_deinit_rfkill(hw); */
rtl_usb_deinit(hw);
rtl_deinit_core(hw);
kfree(rtlpriv->usb_data);
rtlpriv->cfg->ops->deinit_sw_leds(hw);
rtlpriv->cfg->ops->deinit_sw_vars(hw);
_rtl_usb_io_handler_release(hw);
usb_put_dev(rtlusb->udev);
usb_set_intfdata(intf, NULL);
ieee80211_free_hw(hw);
}
static void rtl_usb_stop(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
struct urb *urb;
/* should after adapter start and interrupt enable. */
set_hal_stop(rtlhal);
cancel_work_sync(&rtlpriv->works.fill_h2c_cmd);
/* Enable software */
SET_USB_STOP(rtlusb);
rtl_usb_deinit(hw);
/* free pre-allocated URBs from rtl_usb_start() */
usb_kill_anchored_urbs(&rtlusb->rx_submitted);
tasklet_kill(&rtlusb->rx_work_tasklet);
cancel_work_sync(&rtlpriv->works.lps_change_work);
flush_workqueue(rtlpriv->works.rtl_wq);
skb_queue_purge(&rtlusb->rx_queue);
while ((urb = usb_get_from_anchor(&rtlusb->rx_cleanup_urbs))) {
usb_free_coherent(urb->dev, urb->transfer_buffer_length,
urb->transfer_buffer, urb->transfer_dma);
usb_free_urb(urb);
}
rtlpriv->cfg->ops->hw_disable(hw);
}
static void rtl_usb_stop(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
/* should after adapter start and interrupt enable. */
set_hal_stop(rtlhal);
/* Enable software */
SET_USB_STOP(rtlusb);
rtl_usb_deinit(hw);
rtlpriv->cfg->ops->hw_disable(hw);
}
static void rtl_usb_stop(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
set_hal_stop(rtlhal);
SET_USB_STOP(rtlusb);
rtl_usb_deinit(hw);
rtlpriv->cfg->ops->hw_disable(hw);
}
void rtl_usb_disconnect(struct usb_interface *intf)
{
struct ieee80211_hw *hw = usb_get_intfdata(intf);
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
if (unlikely(!rtlpriv))
return;
/* just in case driver is removed before firmware callback */
wait_for_completion(&rtlpriv->firmware_loading_complete);
clear_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status);
rtl_mac80211_deinit(hw);
rtl_usb_deinit(hw);
rtl_deinit_core(hw);
kfree(rtlpriv->usb_data);
rtlpriv->cfg->ops->deinit_sw_leds(hw);
rtlpriv->cfg->ops->deinit_sw_vars(hw);
_rtl_usb_io_handler_release(hw);
usb_put_dev(rtlusb->udev);
usb_set_intfdata(intf, NULL);
ieee80211_free_hw(hw);
}
