int s2e_web_configure(char buf[], int app_state, int connection_state)
{
int err;
int val;
uart_config_data_t data;
int telnet_port;
chanend c_uart_config = (chanend) ((app_state_t *) app_state)->c_uart_config;
chanend c_flash_data = (chanend) ((app_state_t *) app_state)->c_flash;
char *err_msg;
char *web_form_req;
int flash_result;
if (!web_server_is_post(connection_state))
return 0;
web_form_req = web_server_get_param("form_action", connection_state);
if (strcmp(web_form_req, "Get") == 0)
{
return output_msg(buf, success_msg);
}
else if (strcmp(web_form_req, "Set") == 0)
{
val = get_int_param("id", connection_state, &err);
if (err)
return output_msg(buf, s2e_validation_bad_channel_id);
data.channel_id = val;
// Received Set request from web page
val = get_int_param("pc", connection_state, &err);
if (err)
return output_msg(buf, s2e_validation_bad_parity_msg);
data.parity = val;
val = get_int_param("sb", connection_state, &err);
if (err)
return output_msg(buf, s2e_validation_bad_stop_bits_msg);
data.stop_bits = val;
val = get_int_param("br", connection_state, &err);
if (err)
return output_msg(buf, s2e_validation_bad_baudrate_msg);
data.baud = val;
val = get_int_param("cl", connection_state, &err);
if (err)
return output_msg(buf, s2e_validation_bad_char_len_msg);
data.char_len = val;
val = get_int_param("tp", connection_state, &err);
if (err)
return output_msg(buf, s2e_validation_bad_telnet_port_msg);
telnet_port = val;
data.polarity = 0;
err_msg = s2e_validate_uart_config(&data);
if (err_msg)
return output_msg(buf, err_msg);
err_msg = s2e_validate_telnet_port(data.channel_id, telnet_port);
if (err_msg)
return output_msg(buf, err_msg);
// Do the setting
uart_config_data_t *config = uart_get_config(data.channel_id);
*config = data;
uart_set_config(c_uart_config, &data);
// We have to delay the changing of the telnet port until after the
// page is rendered so we can use the tcp channel
pending_telnet_port_change_id = data.channel_id;
pending_telnet_port_change_port = telnet_port;
return output_msg(buf, success_msg);
} // Set
else if (strcmp(web_form_req, "Save") == 0)
{
// Received Save request from web page
send_cmd_to_flash_thread(c_flash_data, UART_CONFIG, FLASH_CMD_SAVE);
for(int i = 0; i < NUM_UART_CHANNELS; i++)
{
uart_config_data_t *data1 = uart_get_config(i);
send_data_to_flash_thread(c_flash_data, data1);
}
flash_result = get_flash_access_result(c_flash_data);
if (flash_result == S2E_FLASH_OK)
{
return output_msg(buf, success_msg);
}
else
{
return output_msg(buf, error_msg);
}
} // Save
else if (strcmp(web_form_req, "Restore") == 0)
{
uart_config_data_t data1;
int telnet_port1;
// Received Restore request from web page
send_cmd_to_flash_thread(c_flash_data, UART_CONFIG, FLASH_CMD_RESTORE);
flash_result = get_flash_access_result(c_flash_data);
if (flash_result == S2E_FLASH_OK)
{
for (int i = 0; i < NUM_UART_CHANNELS; i++)
{
get_data_from_flash_thread(c_flash_data, &data1, &telnet_port1);
uart_config_data_t *config = uart_get_config(data1.channel_id);
*config = data1;
uart_set_config(c_uart_config, &data1);
// We have to delay the changing of the telnet port until after the
// page is rendered so we can use the tcp channel
pending_telnet_port_change_id = data1.channel_id;
pending_telnet_port_change_port = telnet_port1;
}
return output_msg(buf, success_msg);
}
else
{
return output_msg(buf, error_msg);
}
} // Restore
else
{
// invalid request
return output_msg(buf, error_msg);
}
return 0;
}
static void execute_command(chanend c_xtcp,
chanend c_uart_config,
chanend c_flash_data,
xtcp_connection_t *conn,
connection_state_t *st)
{
int out_channel_id;
int flash_result;
uart_config_data_t data1;
int telnet_port1;
switch (st->cmd)
{
case TELNET_CONFIG_CMD_SET:
st->err = s2e_validate_uart_config(&st->config_in);
if (st->err) {
xtcp_init_send(c_xtcp, conn);
return;
}
st->err = s2e_validate_telnet_port(st->config_in.channel_id,
st->telnet_port_in);
if (st->err) {
xtcp_init_send(c_xtcp, conn);
return;
}
uart_config_data_t *config = uart_get_config(st->config_in.channel_id);
*config = st->config_in;
uart_set_config(c_uart_config, &st->config_in);
telnet_to_uart_set_port(c_xtcp,
st->config_in.channel_id,
st->telnet_port_in);
out_channel_id = st->config_in.channel_id;
break;
case TELNET_CONFIG_CMD_GET:
st->err = s2e_validate_channel_id(st->config_in.channel_id);
if (st->err) {
xtcp_init_send(c_xtcp, conn);
return;
}
out_channel_id = st->config_in.channel_id;
break;
case TELNET_CONFIG_CMD_SAVE:
// Received Save request from web page
send_cmd_to_flash_thread(c_flash_data, UART_CONFIG, FLASH_CMD_SAVE);
for(int i = 0; i < NUM_UART_CHANNELS; i++)
{
uart_config_data_t *data1 = uart_get_config(i);
send_data_to_flash_thread(c_flash_data, data1);
}
flash_result = get_flash_access_result(c_flash_data);
if (flash_result != S2E_FLASH_OK)
{
st->err = flash_err_msg;
xtcp_init_send(c_xtcp, conn);
return;
}
out_channel_id = 7;
break;
case TELNET_CONFIG_CMD_RESTORE:
// Received Restore request from web page
send_cmd_to_flash_thread(c_flash_data, UART_CONFIG, FLASH_CMD_RESTORE);
flash_result = get_flash_access_result(c_flash_data);
if (flash_result == S2E_FLASH_OK)
{
for (int i = 0; i < NUM_UART_CHANNELS; i++)
{
get_data_from_flash_thread(c_flash_data, &data1, &telnet_port1);
uart_config_data_t *config = uart_get_config(data1.channel_id);
*config = data1;
uart_set_config(c_uart_config, &data1);
telnet_to_uart_set_port(c_xtcp, data1.channel_id, telnet_port1);
}
}
else
{
st->err = flash_err_msg;
xtcp_init_send(c_xtcp, conn);
return;
}
out_channel_id = 7;
break;
default:
st->err = invalid_cmd_msg;
xtcp_init_send(c_xtcp, conn);
return;
break;
}
st->config_out = *uart_get_config(out_channel_id);
st->telnet_port_out = telnet_to_uart_get_port(out_channel_id);
st->cmd_out = st->cmd;
st->sending_ack = 1;
xtcp_init_send(c_xtcp, conn);
}
