void smdk2416_hsudc_gpio_init(void)
{
s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_UP);
s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(1));
s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 0);
}
static void __init h1940_init(void)
{
u32 tmp;
s3c24xx_fb_set_platdata(&h1940_fb_info);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
s3c24xx_ts_set_platdata(&h1940_ts_cfg);
s3c_i2c0_set_platdata(NULL);
s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
tmp = (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
| (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
| (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
writel(tmp, S3C2410_UPLLCON);
gpio_request(S3C2410_GPC(0), "LCD power");
gpio_request(S3C2410_GPC(5), "LCD power");
gpio_request(S3C2410_GPC(6), "LCD power");
platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
}
static void __init n30_init(void)
{
WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
s3c24xx_fb_set_platdata(&n30_fb_info);
s3c24xx_udc_set_platdata(&n30_udc_cfg);
s3c24xx_mci_set_platdata(&n30_mci_cfg);
s3c_i2c0_set_platdata(&n30_i2ccfg);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
if (machine_is_n30()) {
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
}
if (machine_is_n35()) {
/* Turn off suspend and switch the selectable USB port
* to USB device mode. Turn on suspend for the host
* port since it is not connected on the N35.
*
* Actually, the host port is available at some pads
* on the back of the device, so it would actually be
* possible to add a USB device inside the N35 if you
* are willing to do some hardware modifications. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1,
S3C2410_MISCCR_USBSUSPND0);
platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
}
WARN_ON(gpio_request(S3C2410_GPB(3), "udc pup"));
gpio_direction_output(S3C2410_GPB(3), 0);
}
int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
{
/* enable hsspi bit in misccr */
s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
return 0;
}
static void __init smdk2413_machine_init(void)
{
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
s3c_i2c0_set_platdata(NULL);
platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
smdk_machine_init();
}
static void __init smdk2413_machine_init(void)
{ /* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
s3c_i2c0_set_platdata(NULL);
platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
smdk_machine_init();
}
static void __init rx1950_init_machine(void)
{
int i;
s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
s3c_i2c0_set_platdata(NULL);
s3c_nand_set_platdata(&rx1950_nand_info);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
/* mmc power is disabled by default */
WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
gpio_direction_output(S3C2410_GPJ(1), 0);
for (i = 0; i < 8; i++)
WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
for (i = 10; i < 16; i++)
WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
for (i = 2; i < 8; i++)
WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
for (i = 11; i < 16; i++)
WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
gpio_direction_output(S3C2410_GPA(3), 0);
gpio_direction_output(S3C2410_GPA(4), 0);
gpio_direction_output(S3C2410_GPJ(6), 0);
platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
i2c_register_board_info(0, rx1950_i2c_devices,
ARRAY_SIZE(rx1950_i2c_devices));
}
static int rx3000_udc_probe(struct platform_device *pdev)
{
/* configure vbus pin */
s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_EINT13);
s3c24xx_udc_set_platdata(&rx3000_udc_cfg);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
platform_device_register(&s3c_device_usbgadget);
return 0;
}
static void __init h1940_init(void)
{
u32 tmp;
s3c24xx_fb_set_platdata(&h1940_fb_info);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
tmp = (
0x78 << S3C2410_PLLCON_MDIVSHIFT)
| (0x02 << S3C2410_PLLCON_PDIVSHIFT)
| (0x03 << S3C2410_PLLCON_SDIVSHIFT);
writel(tmp, S3C2410_UPLLCON);
platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
}
static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
{
unsigned long mask;
unsigned long source;
/* calculate the MISCCR setting for the clock */
if (parent == &clk_mpll)
source = S3C2410_MISCCR_CLK0_MPLL;
else if (parent == &clk_upll)
source = S3C2410_MISCCR_CLK0_UPLL;
else if (parent == &clk_f)
source = S3C2410_MISCCR_CLK0_FCLK;
else if (parent == &clk_h)
source = S3C2410_MISCCR_CLK0_HCLK;
else if (parent == &clk_p)
source = S3C2410_MISCCR_CLK0_PCLK;
else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
source = S3C2410_MISCCR_CLK0_DCLK0;
else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
source = S3C2410_MISCCR_CLK0_DCLK0;
else
return -EINVAL;
clk->parent = parent;
if (clk == &s3c24xx_clkout0)
mask = S3C2410_MISCCR_CLK0_MASK;
else {
source <<= 4;
mask = S3C2410_MISCCR_CLK1_MASK;
}
s3c2410_modify_misccr(mask, source);
return 0;
}
static void __init h1940_init(void)
{
u32 tmp;
s3c24xx_fb_set_platdata(&h1940_fb_info);
s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
s3c24xx_ts_set_platdata(&h1940_ts_cfg);
s3c_i2c0_set_platdata(NULL);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
tmp = (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
| (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
| (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
writel(tmp, S3C2410_UPLLCON);
gpio_request(S3C2410_GPC(0), "LCD power");
gpio_request(S3C2410_GPC(1), "LCD power");
gpio_request(S3C2410_GPC(4), "LCD power");
gpio_request(S3C2410_GPC(5), "LCD power");
gpio_request(S3C2410_GPC(6), "LCD power");
gpio_request(H1940_LATCH_LCD_P0, "LCD power");
gpio_request(H1940_LATCH_LCD_P1, "LCD power");
gpio_request(H1940_LATCH_LCD_P2, "LCD power");
gpio_request(H1940_LATCH_LCD_P3, "LCD power");
gpio_request(H1940_LATCH_LCD_P4, "LCD power");
gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power");
gpio_direction_output(S3C2410_GPC(0), 0);
gpio_direction_output(S3C2410_GPC(1), 0);
gpio_direction_output(S3C2410_GPC(4), 0);
gpio_direction_output(S3C2410_GPC(5), 0);
gpio_direction_input(S3C2410_GPC(6));
gpio_direction_output(H1940_LATCH_LCD_P0, 0);
gpio_direction_output(H1940_LATCH_LCD_P1, 0);
gpio_direction_output(H1940_LATCH_LCD_P2, 0);
gpio_direction_output(H1940_LATCH_LCD_P3, 0);
gpio_direction_output(H1940_LATCH_LCD_P4, 0);
gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
gpio_request(H1940_LATCH_SD_POWER, "SD power");
gpio_direction_output(H1940_LATCH_SD_POWER, 0);
platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
gpio_request(S3C2410_GPA(1), "Red LED blink");
gpio_request(S3C2410_GPA(3), "Blue LED blink");
gpio_request(S3C2410_GPA(7), "Green LED blink");
gpio_request(H1940_LATCH_LED_FLASH, "LED blink");
gpio_direction_output(S3C2410_GPA(1), 0);
gpio_direction_output(S3C2410_GPA(3), 0);
gpio_direction_output(S3C2410_GPA(7), 0);
gpio_direction_output(H1940_LATCH_LED_FLASH, 0);
i2c_register_board_info(0, h1940_i2c_devices,
ARRAY_SIZE(h1940_i2c_devices));
}
static void __init jive_machine_init(void)
{
/* register system core operations for managing low level suspend */
register_syscore_ops(&jive_pm_syscore_ops);
/* write our sleep configurations for the IO. Pull down all unused
* IO, ensure that we have turned off all peripherals we do not
* need, and configure the ones we do need. */
/* Port B sleep */
__raw_writel(S3C2412_SLPCON_IN(0) |
S3C2412_SLPCON_PULL(1) |
S3C2412_SLPCON_HIGH(2) |
S3C2412_SLPCON_PULL(3) |
S3C2412_SLPCON_PULL(4) |
S3C2412_SLPCON_PULL(5) |
S3C2412_SLPCON_PULL(6) |
S3C2412_SLPCON_HIGH(7) |
S3C2412_SLPCON_PULL(8) |
S3C2412_SLPCON_PULL(9) |
S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
/* Port C sleep */
__raw_writel(S3C2412_SLPCON_PULL(0) |
S3C2412_SLPCON_PULL(1) |
S3C2412_SLPCON_PULL(2) |
S3C2412_SLPCON_PULL(3) |
S3C2412_SLPCON_PULL(4) |
S3C2412_SLPCON_PULL(5) |
S3C2412_SLPCON_LOW(6) |
S3C2412_SLPCON_PULL(6) |
S3C2412_SLPCON_PULL(7) |
S3C2412_SLPCON_PULL(8) |
S3C2412_SLPCON_PULL(9) |
S3C2412_SLPCON_PULL(10) |
S3C2412_SLPCON_PULL(11) |
S3C2412_SLPCON_PULL(12) |
S3C2412_SLPCON_PULL(13) |
S3C2412_SLPCON_PULL(14) |
S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
/* Port D sleep */
__raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
/* Port F sleep */
__raw_writel(S3C2412_SLPCON_LOW(0) |
S3C2412_SLPCON_LOW(1) |
S3C2412_SLPCON_LOW(2) |
S3C2412_SLPCON_EINT(3) |
S3C2412_SLPCON_EINT(4) |
S3C2412_SLPCON_EINT(5) |
S3C2412_SLPCON_EINT(6) |
S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
/* Port G sleep */
__raw_writel(S3C2412_SLPCON_IN(0) |
S3C2412_SLPCON_IN(1) |
S3C2412_SLPCON_IN(2) |
S3C2412_SLPCON_IN(3) |
S3C2412_SLPCON_IN(4) |
S3C2412_SLPCON_IN(5) |
S3C2412_SLPCON_IN(6) |
S3C2412_SLPCON_IN(7) |
S3C2412_SLPCON_PULL(8) |
S3C2412_SLPCON_PULL(9) |
S3C2412_SLPCON_IN(10) |
S3C2412_SLPCON_PULL(11) |
S3C2412_SLPCON_PULL(12) |
S3C2412_SLPCON_PULL(13) |
S3C2412_SLPCON_IN(14) |
S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
/* Port H sleep */
__raw_writel(S3C2412_SLPCON_PULL(0) |
S3C2412_SLPCON_PULL(1) |
S3C2412_SLPCON_PULL(2) |
S3C2412_SLPCON_PULL(3) |
S3C2412_SLPCON_PULL(4) |
S3C2412_SLPCON_PULL(5) |
S3C2412_SLPCON_PULL(6) |
S3C2412_SLPCON_IN(7) |
S3C2412_SLPCON_IN(8) |
S3C2412_SLPCON_PULL(9) |
S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
/* initialise the power management now we've setup everything. */
s3c_pm_init();
/** TODO - check that this is after the cmdline option! */
s3c_nand_set_platdata(&jive_nand_info);
/* initialise the spi */
gpio_request(S3C2410_GPG(13), "lcm reset");
gpio_direction_output(S3C2410_GPG(13), 0);
gpio_request(S3C2410_GPB(7), "jive spi");
gpio_direction_output(S3C2410_GPB(7), 1);
gpio_request_one(S3C2410_GPB(6), GPIOF_OUT_INIT_LOW, NULL);
gpio_free(S3C2410_GPB(6));
gpio_request_one(S3C2410_GPG(8), GPIOF_OUT_INIT_HIGH, NULL);
gpio_free(S3C2410_GPG(8));
/* initialise the WM8750 spi */
gpio_request(S3C2410_GPH(10), "jive wm8750 spi");
gpio_direction_output(S3C2410_GPH(10), 1);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
s3c24xx_udc_set_platdata(&jive_udc_cfg);
s3c24xx_fb_set_platdata(&jive_lcd_config);
spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
s3c_i2c0_set_platdata(&jive_i2c_cfg);
i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
pm_power_off = jive_power_off;
platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
}
static void __init jive_machine_init(void)
{
/* register system devices for managing low level suspend */
sysdev_class_register(&jive_pm_sysclass);
sysdev_register(&jive_pm_sysdev);
/* write our sleep configurations for the IO. Pull down all unused
* IO, ensure that we have turned off all peripherals we do not
* need, and configure the ones we do need. */
/* Port B sleep */
__raw_writel(S3C2412_SLPCON_IN(0) |
S3C2412_SLPCON_PULL(1) |
S3C2412_SLPCON_HIGH(2) |
S3C2412_SLPCON_PULL(3) |
S3C2412_SLPCON_PULL(4) |
S3C2412_SLPCON_PULL(5) |
S3C2412_SLPCON_PULL(6) |
S3C2412_SLPCON_HIGH(7) |
S3C2412_SLPCON_PULL(8) |
S3C2412_SLPCON_PULL(9) |
S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
/* Port C sleep */
__raw_writel(S3C2412_SLPCON_PULL(0) |
S3C2412_SLPCON_PULL(1) |
S3C2412_SLPCON_PULL(2) |
S3C2412_SLPCON_PULL(3) |
S3C2412_SLPCON_PULL(4) |
S3C2412_SLPCON_PULL(5) |
S3C2412_SLPCON_LOW(6) |
S3C2412_SLPCON_PULL(6) |
S3C2412_SLPCON_PULL(7) |
S3C2412_SLPCON_PULL(8) |
S3C2412_SLPCON_PULL(9) |
S3C2412_SLPCON_PULL(10) |
S3C2412_SLPCON_PULL(11) |
S3C2412_SLPCON_PULL(12) |
S3C2412_SLPCON_PULL(13) |
S3C2412_SLPCON_PULL(14) |
S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
/* Port D sleep */
__raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
/* Port F sleep */
__raw_writel(S3C2412_SLPCON_LOW(0) |
S3C2412_SLPCON_LOW(1) |
S3C2412_SLPCON_LOW(2) |
S3C2412_SLPCON_EINT(3) |
S3C2412_SLPCON_EINT(4) |
S3C2412_SLPCON_EINT(5) |
S3C2412_SLPCON_EINT(6) |
S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
/* Port G sleep */
__raw_writel(S3C2412_SLPCON_IN(0) |
S3C2412_SLPCON_IN(1) |
S3C2412_SLPCON_IN(2) |
S3C2412_SLPCON_IN(3) |
S3C2412_SLPCON_IN(4) |
S3C2412_SLPCON_IN(5) |
S3C2412_SLPCON_IN(6) |
S3C2412_SLPCON_IN(7) |
S3C2412_SLPCON_PULL(8) |
S3C2412_SLPCON_PULL(9) |
S3C2412_SLPCON_IN(10) |
S3C2412_SLPCON_PULL(11) |
S3C2412_SLPCON_PULL(12) |
S3C2412_SLPCON_PULL(13) |
S3C2412_SLPCON_IN(14) |
S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
/* Port H sleep */
__raw_writel(S3C2412_SLPCON_PULL(0) |
S3C2412_SLPCON_PULL(1) |
S3C2412_SLPCON_PULL(2) |
S3C2412_SLPCON_PULL(3) |
S3C2412_SLPCON_PULL(4) |
S3C2412_SLPCON_PULL(5) |
S3C2412_SLPCON_PULL(6) |
S3C2412_SLPCON_IN(7) |
S3C2412_SLPCON_IN(8) |
S3C2412_SLPCON_PULL(9) |
S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
/* initialise the power management now we've setup everything. */
s3c_pm_init();
s3c_device_nand.dev.platform_data = &jive_nand_info;
/* initialise the spi */
s3c2410_gpio_setpin(S3C2410_GPG13, 0);
s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB7, 1);
s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB6, 0);
s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPG8, 1);
s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
/* initialise the WM8750 spi */
s3c2410_gpio_setpin(S3C2410_GPH10, 1);
s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
s3c24xx_udc_set_platdata(&jive_udc_cfg);
s3c24xx_fb_set_platdata(&jive_lcd_config);
spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
s3c_i2c0_set_platdata(&jive_i2c_cfg);
i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
pm_power_off = jive_power_off;
platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
}
static void smdk2416_hsudc_gpio_uninit(void)
{
s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 1);
s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(0));
}
