C++ (Cpp) scsi_reset示例

示例#1

文件： main.c 项目： kristianhk/PUAE

void virtualdevice_init (void)
{
#ifdef AUTOCONFIG
	/* Install resident module to get 8MB chipmem, if requested */
	rtarea_setup ();
#endif
#ifdef FILESYS
	rtarea_init ();
	uaeres_install ();
	hardfile_install ();
#endif
#ifdef SCSIEMU
	scsi_reset ();
	scsidev_install ();
#endif
#ifdef SANA2
	netdev_install ();
#endif
#ifdef UAESERIAL
	uaeserialdev_install ();
#endif
#ifdef AUTOCONFIG
	expansion_init ();
	emulib_install ();
	uaeexe_install ();
#endif
#ifdef FILESYS
	filesys_install ();
#endif
#if defined (BSDSOCKET)
	bsdlib_install ();
#endif
}

示例#2

文件： devices.cpp 项目： emoon/fs-uae

void virtualdevice_init (void)
{
#ifdef AUTOCONFIG
	rtarea_setup ();
#endif
#ifdef FILESYS
	rtarea_init ();
#ifdef WITH_SEGTRACKER
	segtracker_install ();
#endif /* WITH_SEGTRACKER */
	uaeres_install ();
	hardfile_install ();
#endif
#ifdef SCSIEMU
	scsi_reset ();
	scsidev_install ();
#endif
#ifdef SANA2
	netdev_install ();
#endif
#ifdef UAESERIAL
	uaeserialdev_install ();
#endif
#ifdef AUTOCONFIG
	expansion_init ();
	emulib_install ();
	uaeexe_install ();
#endif
#ifdef FILESYS
	filesys_install ();
#endif
#if defined (BSDSOCKET)
	bsdlib_install ();
#endif
#ifdef WITH_UAENATIVE
	uaenative_install ();
#endif
#ifdef WITH_TABLETLIBRARY
	tabletlib_install ();
#endif
#ifdef NCR
	ncr_init();
#endif
#ifdef NCR9X
	ncr9x_init();
#endif
#ifdef CDTV
	cdtvcr_reset();
#endif
}

示例#3

文件： devices.cpp 项目： emoon/fs-uae

void reset_all_systems (void)
{
	init_eventtab ();

#ifdef WITH_PPC
	uae_ppc_reset(is_hardreset());
#endif
#ifdef PICASSO96
	picasso_reset ();
#endif
#ifdef SCSIEMU
	scsi_reset ();
	scsidev_reset ();
	scsidev_start_threads ();
#endif
#ifdef A2065
	a2065_reset ();
#endif
#ifdef SANA2
	netdev_reset ();
	netdev_start_threads ();
#endif
#ifdef WITH_PCI
	pci_reset();
#endif
#ifdef FILESYS
	filesys_prepare_reset ();
	filesys_reset ();
#endif
	init_shm ();
	memory_reset ();
#if defined (BSDSOCKET)
	bsdlib_reset ();
#endif
#ifdef FILESYS
	filesys_start_threads ();
	hardfile_reset ();
#endif
#ifdef UAESERIAL
	uaeserialdev_reset ();
	uaeserialdev_start_threads ();
#endif
#ifdef PARALLEL_PORT
	initparallel ();
#endif
	native2amiga_reset ();
	dongle_reset ();
	sampler_init ();
	uae_int_requested = 0;
}

示例#4

文件： main.c 项目： kristianhk/PUAE

void reset_all_systems (void)
{
	init_eventtab ();

#ifdef PICASSO96
	picasso_reset ();
#endif
#ifdef SCSIEMU
	scsi_reset ();
	scsidev_reset ();
	scsidev_start_threads ();
#endif
#ifdef A2065
	a2065_reset ();
#endif
#ifdef SANA2
	netdev_reset ();
	netdev_start_threads ();
#endif
#ifdef FILESYS
	filesys_prepare_reset ();
	filesys_reset ();
#endif
#ifdef NATMEM_OFFSET
	init_shm ();
#endif
	memory_reset ();
#if defined (BSDSOCKET)
	bsdlib_reset ();
#endif
#ifdef FILESYS
	filesys_start_threads ();
	hardfile_reset ();
#endif
#ifdef UAESERIAL
	uaeserialdev_reset ();
	uaeserialdev_start_threads ();
#endif
#if defined (PARALLEL_PORT)
	initparallel ();
#endif
	native2amiga_reset ();
	dongle_reset ();
#ifdef SAMPLER
	sampler_init ();
#endif
}

示例#5

文件： main.c 项目： hoglet67/b-em

void main_reset()
{
        m6502_reset();
        crtc_reset();
        video_reset();
        sysvia_reset();
        uservia_reset();
        serial_reset();
        acia_reset(&sysacia);
        wd1770_reset();
        i8271_reset();
        scsi_reset();
        vdfs_reset();
        sid_reset();
        music4000_reset();
        music5000_reset();
        sn_init();
        if (curtube != -1) tubes[curtube].reset();
        else               tube_exec = NULL;
        tube_reset();

        memset(ram, 0, 64 * 1024);
}

示例#6

文件： main.cpp 项目： Vairn/WinUAE

static int real_main2 (int argc, TCHAR **argv)
{

#ifdef USE_SDL
	SDL_Init (SDL_INIT_TIMER | SDL_INIT_AUDIO | SDL_INIT_JOYSTICK | SDL_INIT_NOPARACHUTE);
#endif
	config_changed = 1;
	if (restart_config[0]) {
		default_prefs (&currprefs, 0);
		fixup_prefs (&currprefs);
	}

	if (! graphics_setup ()) {
		exit (1);
	}

#ifdef NATMEM_OFFSET
	preinit_shm ();
#endif

	if (restart_config[0])
		parse_cmdline_and_init_file (argc, argv);
	else
		currprefs = changed_prefs;

	if (!machdep_init ()) {
		restart_program = 0;
		return -1;
	}

	if (console_emulation) {
		consolehook_config (&currprefs);
		fixup_prefs (&currprefs);
	}

	if (! setup_sound ()) {
		write_log (L"Sound driver unavailable: Sound output disabled\n");
		currprefs.produce_sound = 0;
	}
	inputdevice_init ();

	changed_prefs = currprefs;
	no_gui = ! currprefs.start_gui;
	if (restart_program == 2)
		no_gui = 1;
	else if (restart_program == 3)
		no_gui = 0;
	restart_program = 0;
	if (! no_gui) {
		int err = gui_init ();
		currprefs = changed_prefs;
		config_changed = 1;
		if (err == -1) {
			write_log (L"Failed to initialize the GUI\n");
			return -1;
		} else if (err == -2) {
			return 1;
		}
	}

	logging_init (); /* Yes, we call this twice - the first case handles when the user has loaded
						 a config using the cmd-line.  This case handles loads through the GUI. */

#ifdef NATMEM_OFFSET
	init_shm ();
#endif

#ifdef JIT
	if (!(currprefs.cpu_model >= 68020 && currprefs.address_space_24 == 0 && currprefs.cachesize))
		canbang = 0;
#endif

	fixup_prefs (&currprefs);
	changed_prefs = currprefs;
	target_run ();
	/* force sound settings change */
	currprefs.produce_sound = 0;

#ifdef AUTOCONFIG
	rtarea_setup ();
#endif
#ifdef FILESYS
	rtarea_init ();
	uaeres_install ();
	hardfile_install ();
#endif
	savestate_init ();
#ifdef SCSIEMU
	scsi_reset ();
	scsidev_install ();
#endif
#ifdef SANA2
	netdev_install ();
#endif
#ifdef UAESERIAL
	uaeserialdev_install ();
#endif
	keybuf_init (); /* Must come after init_joystick */

#ifdef AUTOCONFIG
	expansion_init ();
#endif
#ifdef FILESYS
	filesys_install ();
#endif
	memory_init ();
	memory_reset ();

#ifdef AUTOCONFIG
#if defined (BSDSOCKET)
	bsdlib_install ();
#endif
	emulib_install ();
	uaeexe_install ();
	native2amiga_install ();
#endif

	custom_init (); /* Must come after memory_init */
#ifdef SERIAL_PORT
	serial_init ();
#endif
	DISK_init ();

	reset_frame_rate_hack ();
	init_m68k (); /* must come after reset_frame_rate_hack (); */

	gui_update ();

	if (graphics_init ()) {
		setup_brkhandler ();
		if (currprefs.start_debugger && debuggable ())
			activate_debugger ();

		if (!init_audio ()) {
			if (sound_available && currprefs.produce_sound > 1) {
				write_log (L"Sound driver unavailable: Sound output disabled\n");
			}
			currprefs.produce_sound = 0;
		}
		start_program ();
	}
	return 0;
}

示例#7

文件： scsi.c 项目： AM7000000/mchck

void
scsi_init(struct scsi_state *s)
{
	scsi_reset(s);
}

示例#8

文件： main.c 项目： ezgranny420/PUAE

static int real_main2 (int argc, TCHAR **argv)
{
#if (defined (_WIN32) || defined (_WIN64)) && !defined (NO_WIN32_EXCEPTION_HANDLER)
	extern int EvalException (LPEXCEPTION_POINTERS blah, int n_except);
	__try
#endif
	{

#ifdef USE_SDL
	int result = (SDL_Init (SDL_INIT_TIMER | SDL_INIT_JOYSTICK | SDL_INIT_NOPARACHUTE) == 0);
	if (result)
		atexit (SDL_Quit);
#endif
	config_changed = 1;
	if (restart_config[0]) {
		default_prefs (&currprefs, 0);
		fixup_prefs (&currprefs);
	}

	if (! graphics_setup ()) {
		write_log ("Graphics Setup Failed\n");
		exit (1);
	}

#ifdef NATMEM_OFFSET
	preinit_shm ();
#endif

	if (restart_config[0])
		parse_cmdline_and_init_file (argc, argv);
	else
		currprefs = changed_prefs;

	uae_inithrtimer ();

	if (!machdep_init ()) {
		write_log ("Machine Init Failed.\n");
		restart_program = 0;
		return -1;
	}

	if (console_emulation) {
		consolehook_config (&currprefs);
		fixup_prefs (&currprefs);
	}

	if (! setup_sound ()) {
		write_log ("Sound driver unavailable: Sound output disabled\n");
		currprefs.produce_sound = 0;
	}
	inputdevice_init ();

	changed_prefs = currprefs;
	no_gui = ! currprefs.start_gui;
	if (restart_program == 2)
		no_gui = 1;
	else if (restart_program == 3)
		no_gui = 0;
	restart_program = 0;
	if (! no_gui) {
		int err = gui_init ();
		currprefs = changed_prefs;
		config_changed = 1;
		if (err == -1) {
			write_log ("Failed to initialize the GUI\n");
			return -1;
		} else if (err == -2) {
			return 1;
		}
	}

#ifdef NATMEM_OFFSET
	init_shm ();
#endif

#ifdef JIT
	if (!(currprefs.cpu_model >= 68020 && currprefs.address_space_24 == 0 && currprefs.cachesize))
		canbang = 0;
#endif

	fixup_prefs (&currprefs);
	changed_prefs = currprefs;
	target_run ();
	/* force sound settings change */
	currprefs.produce_sound = 0;

#ifdef AUTOCONFIG
	/* Install resident module to get 8MB chipmem, if requested */
	rtarea_setup ();
#endif
#ifdef FILESYS
	rtarea_init ();
	uaeres_install ();
	hardfile_install ();
#endif
	savestate_init ();
#ifdef SCSIEMU
	scsi_reset ();
	scsidev_install ();
#endif
#ifdef SANA2
	netdev_install ();
#endif
#ifdef UAESERIAL
	uaeserialdev_install ();
#endif
	keybuf_init (); /* Must come after init_joystick */

#ifdef AUTOCONFIG
	expansion_init ();
#endif
#ifdef FILESYS
	filesys_install ();
#endif
	target_startup_sequence (&currprefs);
	memory_init ();
	memory_reset ();

#ifdef AUTOCONFIG
#if defined (BSDSOCKET)
	bsdlib_install ();
#endif
	emulib_install ();
	uaeexe_install ();
	native2amiga_install ();
#endif

	custom_init (); /* Must come after memory_init */
#ifdef SERIAL_PORT
	serial_init ();
#endif
	DISK_init ();

	reset_frame_rate_hack ();
	init_m68k (); /* must come after reset_frame_rate_hack (); */

	gui_update ();

	if (graphics_init ()) {
#ifdef DEBUGGER
		setup_brkhandler ();
		if (currprefs.start_debugger && debuggable ())
			activate_debugger ();
#endif

		if (!init_audio ()) {
			if (sound_available && currprefs.produce_sound > 1) {
				write_log ("Sound driver unavailable: Sound output disabled\n");
			}
			currprefs.produce_sound = 0;
		}
		start_program ();
	}

    }
#if (defined (_WIN32) || defined (_WIN64)) && !defined (NO_WIN32_EXCEPTION_HANDLER)
#ifdef JIT
    __except( EvalException( GetExceptionInformation(), GetExceptionCode() ) )
#else
	__except (DummyException (GetExceptionInformation (), GetExceptionCode ()))
#endif
	{
		// EvalException does the good stuff...
	}
#endif
	return 0;
}