static int rtsx_control_thread(void * __dev)
{
struct rtsx_dev *dev = (struct rtsx_dev *)__dev;
struct rtsx_chip *chip = dev->chip;
struct Scsi_Host *host = rtsx_to_host(dev);
current->flags |= PF_NOFREEZE;
for(;;) {
if(down_interruptible(&dev->sema))
break;
mutex_lock(&(dev->dev_mutex));
if (rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
printk(KERN_INFO "-- rtsx-control exiting\n");
mutex_unlock(&dev->dev_mutex);
break;
}
scsi_lock(host);
if (rtsx_chk_stat(chip, RTSX_STAT_ABORT)) {
chip->srb->result = DID_ABORT << 16;
goto SkipForAbort;
}
scsi_unlock(host);
/* reject the command if the direction indicator
* is UNKNOWN
*/
if (chip->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
printk(KERN_ERR "UNKNOWN data direction\n");
chip->srb->result = DID_ERROR << 16;
}
/* reject if target != 0 or if LUN is higher than
* the maximum known LUN
*/
else if (chip->srb->device->id) {
printk(KERN_ERR "Bad target number (%d:%d)\n",
chip->srb->device->id, chip->srb->device->lun);
chip->srb->result = DID_BAD_TARGET << 16;
}
else if (chip->srb->device->lun > chip->max_lun) {
printk(KERN_ERR "Bad LUN (%d:%d)\n",
chip->srb->device->id, chip->srb->device->lun);
chip->srb->result = DID_BAD_TARGET << 16;
}
else {
RTSX_DEBUG(scsi_show_command(chip->srb));
rtsx_invoke_transport(chip->srb, chip);
}
scsi_lock(host);
if (!chip->srb)
;
else if (chip->srb->result != DID_ABORT << 16) {
chip->srb->scsi_done(chip->srb);
} else {
SkipForAbort:
printk(KERN_ERR "scsi command aborted\n");
}
if (rtsx_chk_stat(chip, RTSX_STAT_ABORT)) {
complete(&(dev->notify));
rtsx_set_stat(chip, RTSX_STAT_IDLE);
}
chip->srb = NULL;
scsi_unlock(host);
mutex_unlock(&dev->dev_mutex);
}
scsi_host_put(host);
/* notify the exit routine that we're actually exiting now
*
* complete()/wait_for_completion() is similar to up()/down(),
* except that complete() is safe in the case where the structure
* is getting deleted in a parallel mode of execution (i.e. just
* after the down() -- that's necessary for the thread-shutdown
* case.
*
* complete_and_exit() goes even further than this -- it is safe in
* the case that the thread of the caller is going away (not just
* the structure) -- this is necessary for the module-remove case.
* This is important in preemption kernels, which transfer the flow
* of execution immediately upon a complete().
*/
complete_and_exit(&threads_gone, 0);
}
static int rtsx_control_thread(void *__dev)
{
struct rtsx_dev *dev = __dev;
struct rtsx_chip *chip = dev->chip;
struct Scsi_Host *host = rtsx_to_host(dev);
for (;;) {
if (wait_for_completion_interruptible(&dev->cmnd_ready))
break;
/* lock the device pointers */
mutex_lock(&(dev->dev_mutex));
/* if the device has disconnected, we are free to exit */
if (rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
dev_info(&dev->pci->dev, "-- rtsx-control exiting\n");
mutex_unlock(&dev->dev_mutex);
break;
}
/* lock access to the state */
scsi_lock(host);
/* has the command aborted ? */
if (rtsx_chk_stat(chip, RTSX_STAT_ABORT)) {
chip->srb->result = DID_ABORT << 16;
goto SkipForAbort;
}
scsi_unlock(host);
/* reject the command if the direction indicator
* is UNKNOWN
*/
if (chip->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
dev_err(&dev->pci->dev, "UNKNOWN data direction\n");
chip->srb->result = DID_ERROR << 16;
}
/* reject if target != 0 or if LUN is higher than
* the maximum known LUN
*/
else if (chip->srb->device->id) {
dev_err(&dev->pci->dev, "Bad target number (%d:%d)\n",
chip->srb->device->id,
(u8)chip->srb->device->lun);
chip->srb->result = DID_BAD_TARGET << 16;
}
else if (chip->srb->device->lun > chip->max_lun) {
dev_err(&dev->pci->dev, "Bad LUN (%d:%d)\n",
chip->srb->device->id,
(u8)chip->srb->device->lun);
chip->srb->result = DID_BAD_TARGET << 16;
}
/* we've got a command, let's do it! */
else {
scsi_show_command(chip);
rtsx_invoke_transport(chip->srb, chip);
}
/* lock access to the state */
scsi_lock(host);
/* did the command already complete because of a disconnect? */
if (!chip->srb)
; /* nothing to do */
/* indicate that the command is done */
else if (chip->srb->result != DID_ABORT << 16) {
chip->srb->scsi_done(chip->srb);
} else {
SkipForAbort:
dev_err(&dev->pci->dev, "scsi command aborted\n");
}
if (rtsx_chk_stat(chip, RTSX_STAT_ABORT)) {
complete(&(dev->notify));
rtsx_set_stat(chip, RTSX_STAT_IDLE);
}
/* finished working on this command */
chip->srb = NULL;
scsi_unlock(host);
/* unlock the device pointers */
mutex_unlock(&dev->dev_mutex);
} /* for (;;) */
/* notify the exit routine that we're actually exiting now
*
* complete()/wait_for_completion() is similar to up()/down(),
* except that complete() is safe in the case where the structure
* is getting deleted in a parallel mode of execution (i.e. just
* after the down() -- that's necessary for the thread-shutdown
* case.
*
* complete_and_exit() goes even further than this -- it is safe in
* the case that the thread of the caller is going away (not just
* the structure) -- this is necessary for the module-remove case.
* This is important in preemption kernels, which transfer the flow
* of execution immediately upon a complete().
*/
complete_and_exit(&dev->control_exit, 0);
}
static int rts51x_control_thread(void *__chip)
{
struct rts51x_chip *chip = (struct rts51x_chip *)__chip;
struct Scsi_Host *host = rts51x_to_host(chip);
for (;;) {
if (wait_for_completion_interruptible(&chip->usb->cmnd_ready))
break;
if (test_bit(FLIDX_DISCONNECTING, &chip->usb->dflags)) {
RTS51X_DEBUGP("-- exiting from rts51x-control\n");
break;
}
mutex_lock(&(chip->usb->dev_mutex));
scsi_lock(host);
if (chip->srb == NULL) {
scsi_unlock(host);
mutex_unlock(&chip->usb->dev_mutex);
RTS51X_DEBUGP("-- exiting from control thread\n");
break;
}
if (test_bit(FLIDX_TIMED_OUT, &chip->usb->dflags)) {
chip->srb->result = DID_ABORT << 16;
goto SkipForAbort;
}
scsi_unlock(host);
if (chip->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
RTS51X_DEBUGP("UNKNOWN data direction\n");
chip->srb->result = DID_ERROR << 16;
}
else if (chip->srb->device->id) {
RTS51X_DEBUGP("Bad target number (%d:%d)\n",
chip->srb->device->id,
chip->srb->device->lun);
chip->srb->result = DID_BAD_TARGET << 16;
}
else if (chip->srb->device->lun > chip->max_lun) {
RTS51X_DEBUGP("Bad LUN (%d:%d)\n",
chip->srb->device->id,
chip->srb->device->lun);
chip->srb->result = DID_BAD_TARGET << 16;
}
else {
RTS51X_DEBUG(scsi_show_command(chip->srb));
rts51x_invoke_transport(chip->srb, chip);
}
scsi_lock(host);
if (chip->srb->result != DID_ABORT << 16)
chip->srb->scsi_done(chip->srb);
else
SkipForAbort :
RTS51X_DEBUGP("scsi command aborted\n");
if (test_bit(FLIDX_TIMED_OUT, &chip->usb->dflags)) {
complete(&(chip->usb->notify));
clear_bit(FLIDX_ABORTING, &chip->usb->dflags);
clear_bit(FLIDX_TIMED_OUT, &chip->usb->dflags);
}
chip->srb = NULL;
scsi_unlock(host);
mutex_unlock(&chip->usb->dev_mutex);
}
complete(&chip->usb->control_exit);
return 0;
}