void DisableInterrupt8723BSdio(struct adapter *adapter)
{
__le32 himr;
himr = cpu_to_le32(SDIO_HIMR_DISABLED);
sdio_local_write(adapter, SDIO_REG_HIMR, 4, (u8 *)&himr);
}
//
// Description:
// Enalbe SDIO Host Interrupt Mask configuration on SDIO local domain.
//
// Assumption:
// 1. Using SDIO Local register ONLY for configuration.
// 2. PASSIVE LEVEL
//
// Created by Roger, 2011.02.11.
//
void EnableInterrupt8723BSdio(PADAPTER padapter)
{
PHAL_DATA_TYPE pHalData;
u32 himr;
#ifdef CONFIG_CONCURRENT_MODE
if ((padapter->isprimary == _FALSE) && padapter->pbuddy_adapter){
padapter = padapter->pbuddy_adapter;
}
#endif
pHalData = GET_HAL_DATA(padapter);
himr = cpu_to_le32(pHalData->sdio_himr);
sdio_local_write(padapter, SDIO_REG_HIMR, 4, (u8*)&himr);
RT_TRACE(_module_hci_ops_c_, _drv_notice_,
("%s: enable SDIO HIMR=0x%08X\n", __FUNCTION__, pHalData->sdio_himr));
// Update current system IMR settings
himr = rtw_read32(padapter, REG_HSIMR);
rtw_write32(padapter, REG_HSIMR, himr|pHalData->SysIntrMask);
RT_TRACE(_module_hci_ops_c_, _drv_notice_,
("%s: enable HSIMR=0x%08X\n", __FUNCTION__, pHalData->SysIntrMask));
//
// <Roger_Notes> There are some C2H CMDs have been sent before system interrupt is enabled, e.g., C2H, CPWM.
// So we need to clear all C2H events that FW has notified, otherwise FW won't schedule any commands anymore.
// 2011.10.19.
//
rtw_write8(padapter, REG_C2HEVT_CLEAR, C2H_EVT_HOST_CLOSE);
}
//
// Description:
// Disable SDIO Host IMR configuration to mask unnecessary interrupt service.
//
// Assumption:
// Using SDIO Local register ONLY for configuration.
//
// Created by Roger, 2011.02.11.
//
void DisableInterrupt8723BSdio(PADAPTER padapter)
{
u32 himr;
#ifdef CONFIG_CONCURRENT_MODE
if ((padapter->isprimary == _FALSE) && padapter->pbuddy_adapter){
padapter = padapter->pbuddy_adapter;
}
#endif
himr = cpu_to_le32(SDIO_HIMR_DISABLED);
sdio_local_write(padapter, SDIO_REG_HIMR, 4, (u8*)&himr);
}
void ClearInterrupt8189ESdio(PADAPTER padapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
u32 v32;
pHalData->sdio_hisr &= pHalData->sdio_himr;
// clear HISR
v32 = pHalData->sdio_hisr & MASK_SDIO_HISR_CLEAR;
if (v32) {
v32 = cpu_to_le32(v32);
sdio_local_write(padapter, SDIO_REG_HISR, 4, (u8*)&v32);
}
}
//
// Description:
// Disable SDIO Host IMR configuration to mask unnecessary interrupt service.
//
// Assumption:
// Using SDIO Local register ONLY for configuration.
//
// Created by Roger, 2011.02.11.
//
void DisableInterrupt8188ESdio(PADAPTER padapter)
{
// Clear all ISRs
//PlatformEFSdioLocalCmd52Write4Byte(Adapter, SDIO_REG_HISR, pHalData->IntrMaskToClear[0]);
//PlatformEFIOWrite4Byte(Adapter, REG_HSISR, pHalData->SysIntrMaskToClear[0]);
// Clear all IMRs
#if 0
SdioLocalCmd52Write4Byte(padapter, SDIO_REG_HIMR, SDIO_HIMR_DISABLED);
#else
u32 himr;
himr = cpu_to_le32(SDIO_HIMR_DISABLED);
sdio_local_write(padapter, SDIO_REG_HIMR, 4, (u8*)&himr);
#endif
}
void DisableInterruptButCpwm28723BSdio(PADAPTER padapter)
{
u32 himr, tmp;
#ifdef CONFIG_CONCURRENT_MODE
if ((padapter->isprimary == _FALSE) && padapter->pbuddy_adapter){
padapter = padapter->pbuddy_adapter;
}
#endif
sdio_local_read(padapter, SDIO_REG_HIMR, 4, (u8*)&tmp);
DBG_871X("DisableInterruptButCpwm28723BSdio(): Read SDIO_REG_HIMR: 0x%08x\n", tmp);
himr = cpu_to_le32(SDIO_HIMR_DISABLED)|SDIO_HIMR_CPWM2_MSK;
sdio_local_write(padapter, SDIO_REG_HIMR, 4, (u8*)&himr);
sdio_local_read(padapter, SDIO_REG_HIMR, 4, (u8*)&tmp);
DBG_871X("DisableInterruptButCpwm28723BSdio(): Read again SDIO_REG_HIMR: 0x%08x\n", tmp);
}
void EnableInterrupt8723BSdio(struct adapter *adapter)
{
struct hal_com_data *haldata;
__le32 himr;
u32 tmp;
haldata = GET_HAL_DATA(adapter);
himr = cpu_to_le32(haldata->sdio_himr);
sdio_local_write(adapter, SDIO_REG_HIMR, 4, (u8 *)&himr);
RT_TRACE(
_module_hci_ops_c_,
_drv_notice_,
(
"%s: enable SDIO HIMR = 0x%08X\n",
__func__,
haldata->sdio_himr
)
);
/* Update current system IMR settings */
tmp = rtw_read32(adapter, REG_HSIMR);
rtw_write32(adapter, REG_HSIMR, tmp | haldata->SysIntrMask);
RT_TRACE(
_module_hci_ops_c_,
_drv_notice_,
(
"%s: enable HSIMR = 0x%08X\n",
__func__,
haldata->SysIntrMask
)
);
/* */
/* <Roger_Notes> There are some C2H CMDs have been sent before system interrupt is enabled, e.g., C2H, CPWM. */
/* So we need to clear all C2H events that FW has notified, otherwise FW won't schedule any commands anymore. */
/* 2011.10.19. */
/* */
rtw_write8(adapter, REG_C2HEVT_CLEAR, C2H_EVT_HOST_CLOSE);
}
void clearinterrupt8723bsdio(struct adapter *adapter)
{
struct hal_com_data *haldata;
u8 *clear;
if (adapter->bSurpriseRemoved)
return;
haldata = GET_HAL_DATA(adapter);
clear = rtw_zmalloc(4);
/* Clear corresponding HISR Content if needed */
*(__le32 *)clear = cpu_to_le32(haldata->sdio_hisr & MASK_SDIO_HISR_CLEAR);
if (*(__le32 *)clear) {
/* Perform write one clear operation */
sdio_local_write(padapter, SDIO_REG_HISR, 4, clear);
}
kfree(clear);
}
void ClearInterrupt8188ESdio(PADAPTER padapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
u32 v32 = 0;
DBG_8192C("+%s+\n", __func__);
v32 = pHalData->sdio_himr | SDIO_HISR_CPWM2;
pHalData->sdio_hisr &= v32;
// clear HISR
v32 = pHalData->sdio_hisr & MASK_SDIO_HISR_CLEAR;
if (v32) {
v32 = cpu_to_le32(v32);
sdio_local_write(padapter, SDIO_REG_HISR, 4, (u8*)&v32);
}
DBG_8192C("-%s-\n", __func__);
}
//
// Description:
// Clear corresponding SDIO Host ISR interrupt service.
//
// Assumption:
// Using SDIO Local register ONLY for configuration.
//
// Created by Roger, 2011.02.11.
//
void ClearInterrupt8723BSdio(PADAPTER padapter)
{
PHAL_DATA_TYPE pHalData;
u8 *clear;
if (_TRUE == padapter->bSurpriseRemoved)
return;
pHalData = GET_HAL_DATA(padapter);
clear = rtw_zmalloc(4);
// Clear corresponding HISR Content if needed
*(u32*)clear = cpu_to_le32(pHalData->sdio_hisr & MASK_SDIO_HISR_CLEAR);
if (*(u32*)clear)
{
// Perform write one clear operation
sdio_local_write(padapter, SDIO_REG_HISR, 4, clear);
}
rtw_mfree(clear, 4);
}
//
// Description:
// Enalbe SDIO Host Interrupt Mask configuration on SDIO local domain.
//
// Assumption:
// 1. Using SDIO Local register ONLY for configuration.
// 2. PASSIVE LEVEL
//
// Created by Roger, 2011.02.11.
//
void EnableInterrupt8188ESdio(PADAPTER padapter)
{
PHAL_DATA_TYPE pHalData;
u32 himr;
#ifdef CONFIG_CONCURRENT_MODE
if ((padapter->isprimary == _FALSE) && padapter->pbuddy_adapter){
padapter = padapter->pbuddy_adapter;
}
#endif
pHalData = GET_HAL_DATA(padapter);
himr = cpu_to_le32(pHalData->sdio_himr);
sdio_local_write(padapter, SDIO_REG_HIMR, 4, (u8*)&himr);
//
// <Roger_Notes> There are some C2H CMDs have been sent before system interrupt is enabled, e.g., C2H, CPWM.
// So we need to clear all C2H events that FW has notified, otherwise FW won't schedule any commands anymore.
// 2011.10.19.
//
rtw_write8(padapter, REG_C2HEVT_CLEAR, C2H_EVT_HOST_CLOSE);
}
//
// Description:
// Enalbe SDIO Host Interrupt Mask configuration on SDIO local domain.
//
// Assumption:
// 1. Using SDIO Local register ONLY for configuration.
// 2. PASSIVE LEVEL
//
// Created by Roger, 2011.02.11.
//
void EnableInterrupt8188ESdio(PADAPTER padapter)
{
PHAL_DATA_TYPE pHalData;
pHalData = GET_HAL_DATA(padapter);
#if 0
SdioLocalCmd52Write4Byte(padapter, SDIO_REG_HIMR, pHalData->sdio_himr);
#else
{
u32 himr;
himr = cpu_to_le32(pHalData->sdio_himr);
sdio_local_write(padapter, SDIO_REG_HIMR, 4, (u8*)&himr);
}
#endif
//
// <Roger_Notes> There are some C2H CMDs have been sent before system interrupt is enabled, e.g., C2H, CPWM.
// So we need to clear all C2H events that FW has notified, otherwise FW won't schedule any commands anymore.
// 2011.10.19.
//
rtw_write8(padapter, REG_C2HEVT_CLEAR, C2H_EVT_HOST_CLOSE);
}
