static int ser_setspeed(union filedescriptor *fd, long baud)
{
int rc;
struct termios termios;
speed_t speed = serial_baud_lookup (baud);
if (!isatty(fd->ifd))
return -ENOTTY;
/*
* initialize terminal modes
*/
rc = tcgetattr(fd->ifd, &termios);
if (rc < 0) {
avrdude_message(MSG_INFO, "%s: ser_setspeed(): tcgetattr() failed",
progname);
return -errno;
}
/*
* copy termios for ser_close if we haven't already
*/
if (! saved_original_termios++) {
original_termios = termios;
}
termios.c_iflag = IGNBRK;
termios.c_oflag = 0;
termios.c_lflag = 0;
termios.c_cflag = (CS8 | CREAD | CLOCAL);
termios.c_cc[VMIN] = 1;
termios.c_cc[VTIME] = 0;
cfsetospeed(&termios, speed);
cfsetispeed(&termios, speed);
rc = tcsetattr(fd->ifd, TCSANOW, &termios);
if (rc < 0) {
avrdude_message(MSG_INFO, "%s: ser_setspeed(): tcsetattr() failed\n",
progname);
return -errno;
}
/*
* Everything is now set up for a local line without modem control
* or flow control, so clear O_NONBLOCK again.
*/
rc = fcntl(fd->ifd, F_GETFL, 0);
if (rc != -1)
fcntl(fd->ifd, F_SETFL, rc & ~O_NONBLOCK);
return 0;
}
static int ser_setspeed(union filedescriptor *fd, long baud)
{
DCB dcb;
HANDLE hComPort = (HANDLE)fd->pfd;
ZeroMemory (&dcb, sizeof(DCB));
dcb.DCBlength = sizeof(DCB);
dcb.BaudRate = serial_baud_lookup (baud);
dcb.fBinary = 1;
dcb.fDtrControl = DTR_CONTROL_DISABLE;
dcb.fRtsControl = RTS_CONTROL_DISABLE;
dcb.ByteSize = 8;
dcb.Parity = NOPARITY;
dcb.StopBits = ONESTOPBIT;
if (!SetCommState(hComPort, &dcb))
return -1;
return 0;
}
static int ser_setspeed(union filedescriptor *fd, long baud)
{
int rc;
struct termios termios;
#if defined __linux__
/* for linux no conversion is needed*/
speed_t speed = baud;
#else
/* converting the baud rate to the bit set needed by posix way*/
speed_t speed = serial_baud_lookup (baud);
#endif
if (!isatty(fd->ifd))
return -ENOTTY;
/*
* initialize terminal modes
*/
rc = tcgetattr(fd->ifd, &termios);
if (rc < 0) {
avrdude_message(MSG_INFO, "%s: ser_setspeed(): tcgetattr() failed",
progname);
return -errno;
}
/*
* copy termios for ser_close if we haven't already
*/
if (! saved_original_termios++) {
original_termios = termios;
}
termios.c_iflag = IGNBRK;
termios.c_oflag = 0;
termios.c_lflag = 0;
termios.c_cflag = (CS8 | CREAD | CLOCAL);
termios.c_cc[VMIN] = 1;
termios.c_cc[VTIME] = 0;
#ifdef __linux__
/* Support for custom baud rate for linux is implemented by setting
* a dummy baud rate of 38400 and manupulating the custom divider of
* the serial interface*/
struct serial_struct ss;
int ioret = ioctl(fd->ifd, TIOCGSERIAL, &ss);
if (ioret < 0){
avrdude_message(MSG_INFO,
"%s: Cannot get serial port settings. ioctl returned %d\n",
progname, ioret);
return -errno;
}
ss.flags = (ss.flags & ~ASYNC_SPD_MASK) | ASYNC_SPD_CUST;
ss.custom_divisor = (ss.baud_base + (speed / 2)) / speed;
unsigned int closestSpeed = ss.baud_base / ss.custom_divisor;
if (closestSpeed < speed * 98 / 100 || closestSpeed > speed * 102 / 100) {
avrdude_message(MSG_INFO,
"%s: Cannot set serial port speed to %d. Closest possible is %d\n",
progname, speed, closestSpeed);
return -errno;
}
ioret= ioctl(fd->ifd, TIOCSSERIAL, &ss);
if (ioret < 0){
avrdude_message(MSG_INFO,
"%s: Cannot set serial port speed to %d. ioctl returned %d\n",
progname, speed, ioret);
return -errno;
}
if (cfsetispeed(&termios, B38400) < 0){
avrdude_message(MSG_INFO,
"%s: cfsetispeed: failed to set dummy baud\n",
progname);
return -errno;
}
if (cfsetospeed(&termios, B38400) < 0){
avrdude_message(MSG_INFO,
"%s: cfsetospeed: failed to set dummy baud\n",
progname);
return -errno;
}
#else /* !linux */
if (cfsetospeed(&termios, speed) < 0){
avrdude_message(MSG_INFO,
"%s: cfsetospeed: failed to set speed: %d\n",
progname, speed);
return -errno;
}
if (cfsetispeed(&termios, speed) < 0){
avrdude_message(MSG_INFO,
"%s: cfsetispeed: failed to set speed: %d\n",
progname, speed);
return -errno;
}
#endif /* linux */
rc = tcsetattr(fd->ifd, TCSANOW, &termios);
if (rc < 0) {
avrdude_message(MSG_INFO, "%s: ser_setspeed(): tcsetattr() failed\n",
progname);
return -errno;
}
#ifdef __linux__
/* a bit more linux specific stuff to set custom baud rates*/
if (ioctl(fd->ifd, TIOCGSERIAL, &ss) < 0){
avrdude_message(MSG_INFO, "%s: ioctl: failed to get port settins\n", progname);
return -errno;
}
ss.flags &= ~ASYNC_SPD_MASK;
if (ioctl(fd->ifd, TIOCSSERIAL, &ss) < 0){
avrdude_message(MSG_INFO, "%s: ioctl: failed to set port settins\n", progname);
return -errno;
}
#endif
/*
* Everything is now set up for a local line without modem control
* or flow control, so clear O_NONBLOCK again.
*/
rc = fcntl(fd->ifd, F_GETFL, 0);
if (rc != -1)
fcntl(fd->ifd, F_SETFL, rc & ~O_NONBLOCK);
return 0;
}