bool FlipFlat::initProperties()
{
INDI::DefaultDevice::initProperties();
// Device port
IUFillText(&PortT[0],"PORT","Port","/dev/ttyUSB0");
IUFillTextVector(&PortTP,PortT,1,getDeviceName(),"DEVICE_PORT","Ports",OPTIONS_TAB,IP_RW,60,IPS_IDLE);
// Status
IUFillText(&StatusT[0],"Cover","",NULL);
IUFillText(&StatusT[1],"Light","",NULL);
IUFillText(&StatusT[2],"Motor","",NULL);
IUFillTextVector(&StatusTP,StatusT,3,getDeviceName(),"Status","",MAIN_CONTROL_TAB,IP_RO,60,IPS_IDLE);
// Firmware version
IUFillText(&FirmwareT[0],"Version","",NULL);
IUFillTextVector(&FirmwareTP,FirmwareT,1,getDeviceName(),"Firmware","",MAIN_CONTROL_TAB,IP_RO,60,IPS_IDLE);
initDustCapProperties(getDeviceName(), MAIN_CONTROL_TAB);
initLightBoxProperties(getDeviceName(), MAIN_CONTROL_TAB);
LightIntensityN[0].min = 0;
LightIntensityN[0].max = 255;
LightIntensityN[0].step = 10;
// Set DUSTCAP_INTEFACE later on connect after we verify whether it's flip-flat (dust cover + light) or just flip-man (light only)
setDriverInterface(AUX_INTERFACE | LIGHTBOX_INTERFACE);
addDebugControl();
return true;
}
bool FlipFlat::ping()
{
char response[FLAT_RES]={0};
if (!sendCommand(">P000", response))
return false;
char productString[3] = { 0 };
snprintf(productString, 3, "%s", response + 2);
int rc = sscanf(productString, "%d", &productID);
if (rc <= 0)
{
LOGF_ERROR("Unable to parse input (%s)", response);
return false;
}
if (productID == 99)
{
setDriverInterface(AUX_INTERFACE | LIGHTBOX_INTERFACE | DUSTCAP_INTERFACE);
isFlipFlat = true;
}
else
isFlipFlat = false;
return true;
}
bool FlipFlat::initProperties()
{
INDI::DefaultDevice::initProperties();
// Status
IUFillText(&StatusT[0], "Cover", "", nullptr);
IUFillText(&StatusT[1], "Light", "", nullptr);
IUFillText(&StatusT[2], "Motor", "", nullptr);
IUFillTextVector(&StatusTP, StatusT, 3, getDeviceName(), "Status", "", MAIN_CONTROL_TAB, IP_RO, 60, IPS_IDLE);
// Firmware version
IUFillText(&FirmwareT[0], "Version", "", nullptr);
IUFillTextVector(&FirmwareTP, FirmwareT, 1, getDeviceName(), "Firmware", "", MAIN_CONTROL_TAB, IP_RO, 60, IPS_IDLE);
initDustCapProperties(getDeviceName(), MAIN_CONTROL_TAB);
initLightBoxProperties(getDeviceName(), MAIN_CONTROL_TAB);
LightIntensityN[0].min = 0;
LightIntensityN[0].max = 255;
LightIntensityN[0].step = 10;
// Set DUSTCAP_INTEFACE later on connect after we verify whether it's flip-flat (dust cover + light) or just flip-man (light only)
setDriverInterface(AUX_INTERFACE | LIGHTBOX_INTERFACE);
addAuxControls();
serialConnection = new Connection::Serial(this);
serialConnection->registerHandshake([&]() { return Handshake(); });
registerConnection(serialConnection);
return true;
}
bool ScopeScript::initProperties()
{
INDI::Telescope::initProperties();
#if defined(__APPLE__)
IUFillText(&ScriptsT[0], "FOLDER", "Folder", "/usr/local/share/indi/scripts");
#else
IUFillText(&ScriptsT[0], "FOLDER", "Folder", "/usr/share/indi/scripts");
#endif
IUFillText(&ScriptsT[SCRIPT_CONNECT], "SCRIPT_CONNECT", "Connect script", "connect.py");
IUFillText(&ScriptsT[SCRIPT_DISCONNECT], "SCRIPT_DISCONNECT", "Disconnect script", "disconnect.py");
IUFillText(&ScriptsT[SCRIPT_STATUS], "SCRIPT_STATUS", "Get status script", "status.py");
IUFillText(&ScriptsT[SCRIPT_GOTO], "SCRIPT_GOTO", "Goto script", "goto.py");
IUFillText(&ScriptsT[SCRIPT_SYNC], "SCRIPT_SYNC", "Sync script", "sync.py");
IUFillText(&ScriptsT[SCRIPT_PARK], "SCRIPT_PARK", "Park script", "park.py");
IUFillText(&ScriptsT[SCRIPT_UNPARK], "SCRIPT_UNPARK", "Unpark script", "unpark.py");
IUFillText(&ScriptsT[SCRIPT_MOVE_NORTH], "SCRIPT_MOVE_NORTH", "Move north script", "move_north.py");
IUFillText(&ScriptsT[SCRIPT_MOVE_EAST], "SCRIPT_MOVE_EAST", "Move east script", "move_east.py");
IUFillText(&ScriptsT[SCRIPT_MOVE_SOUTH], "SCRIPT_MOVE_SOUTH", "Move south script", "move_south.py");
IUFillText(&ScriptsT[SCRIPT_MOVE_WEST], "SCRIPT_MOVE_WEST", "Move west script", "move_west.py");
IUFillText(&ScriptsT[SCRIPT_ABORT], "SCRIPT_ABORT", "Abort motion script", "abort.py");
IUFillTextVector(&ScriptsTP, ScriptsT, SCRIPT_COUNT, getDefaultName(), "SCRIPTS", "Scripts", OPTIONS_TAB, IP_RW, 60,
IPS_IDLE);
addDebugControl();
setDriverInterface(getDriverInterface());
return true;
}
bool INDI::Focuser::initProperties()
{
DefaultDevice::initProperties(); // let the base class flesh in what it wants
initFocuserProperties(getDeviceName(), MAIN_CONTROL_TAB);
/* Port */
IUFillText(&PortT[0], "PORT", "Port", "/dev/ttyUSB0");
IUFillTextVector(&PortTP, PortT, 1, getDeviceName(), "DEVICE_PORT", "Ports", OPTIONS_TAB, IP_RW, 0, IPS_IDLE);
// Presets
IUFillNumber(&PresetN[0], "Preset 1", "", "%6.2f", 0, 60000, 1000, 0);
IUFillNumber(&PresetN[1], "Preset 2", "", "%6.2f", 0, 60000, 1000, 0);
IUFillNumber(&PresetN[2], "Preset 3", "", "%6.2f", 0, 60000, 1000, 0);
IUFillNumberVector(&PresetNP, PresetN, 3, getDeviceName(), "Presets", "", "Presets", IP_RW, 0, IPS_IDLE);
//Preset GOTO
IUFillSwitch(&PresetGotoS[0], "Preset 1", "", ISS_OFF);
IUFillSwitch(&PresetGotoS[1], "Preset 2", "", ISS_OFF);
IUFillSwitch(&PresetGotoS[2], "Preset 3", "", ISS_OFF);
IUFillSwitchVector(&PresetGotoSP, PresetGotoS, 3, getDeviceName(), "Goto", "", "Presets", IP_RW, ISR_1OFMANY, 0, IPS_IDLE);
addDebugControl();
controller->mapController("Focus In", "Focus In", INDI::Controller::CONTROLLER_BUTTON, "BUTTON_1");
controller->mapController("Focus Out", "Focus Out", INDI::Controller::CONTROLLER_BUTTON, "BUTTON_2");
controller->mapController("Abort Focus", "Abort Focus", INDI::Controller::CONTROLLER_BUTTON, "BUTTON_3");
controller->initProperties();
setDriverInterface(FOCUSER_INTERFACE);
return true;
}
bool WeatherMeta::initProperties()
{
INDI::DefaultDevice::initProperties();
// Active Devices
IUFillText(&ActiveDeviceT[0], "ACTIVE_WEATHER_1", "Station #1", nullptr);
IUFillText(&ActiveDeviceT[1], "ACTIVE_WEATHER_2", "Station #2", nullptr);
IUFillText(&ActiveDeviceT[2], "ACTIVE_WEATHER_3", "Station #3", nullptr);
IUFillText(&ActiveDeviceT[3], "ACTIVE_WEATHER_4", "Station #4", nullptr);
IUFillTextVector(&ActiveDeviceTP, ActiveDeviceT, 4, getDeviceName(), "ACTIVE_DEVICES", "Stations", OPTIONS_TAB,
IP_RW, 60, IPS_IDLE);
// Station Status
IUFillLight(&StationL[0], "STATION_STATUS_1", "Station #1", IPS_IDLE);
IUFillLight(&StationL[1], "STATION_STATUS_2", "Station #2", IPS_IDLE);
IUFillLight(&StationL[2], "STATION_STATUS_3", "Station #3", IPS_IDLE);
IUFillLight(&StationL[3], "STATION_STATUS_4", "Station #4", IPS_IDLE);
IUFillLightVector(&StationLP, StationL, 4, getDeviceName(), "WEATHER_STATUS", "Status", MAIN_CONTROL_TAB, IPS_IDLE);
// Update Period
IUFillNumber(&UpdatePeriodN[0], "PERIOD", "Period (secs)", "%4.2f", 0, 3600, 60, 60);
IUFillNumberVector(&UpdatePeriodNP, UpdatePeriodN, 1, getDeviceName(), "WEATHER_UPDATE", "Update", MAIN_CONTROL_TAB,
IP_RO, 60, IPS_IDLE);
addDebugControl();
setDriverInterface(AUX_INTERFACE);
return true;
}
bool FlipFlat::ping()
{
int nbytes_written=0, nbytes_read=0, rc=-1;
char errstr[MAXRBUF];
char command[FLAT_CMD];
char response[FLAT_RES];
int i=0;
tcflush(PortFD, TCIOFLUSH);
strncpy(command, ">P000", FLAT_CMD);
DEBUGF(INDI::Logger::DBG_DEBUG, "CMD (%s)", command);
command[FLAT_CMD-1] = 0xA;
for (i=0; i < 3; i++)
{
if ( (rc = tty_write(PortFD, command, FLAT_CMD, &nbytes_written)) != TTY_OK)
continue;
if ( (rc = tty_read_section(PortFD, response, 0xA, 1, &nbytes_read)) != TTY_OK)
continue;
else
break;
}
if (i==3)
{
tty_error_msg(rc, errstr, MAXRBUF);
DEBUGF(INDI::Logger::DBG_ERROR, "%s: %s.", command, errstr);
return false;
}
response[nbytes_read-1] = '\0';
DEBUGF(INDI::Logger::DBG_DEBUG, "RES (%s)", response);
char productString[3];
snprintf(productString, 3, "%s", response+2);
rc = sscanf(productString, "%d", &productID);
if (rc <= 0)
{
DEBUGF(INDI::Logger::DBG_ERROR, "Unable to parse input (%s)", response);
return false;
}
if (productID == 99)
{
setDriverInterface(AUX_INTERFACE | LIGHTBOX_INTERFACE | DUSTCAP_INTERFACE);
isFlipFlat = true;
}
else
isFlipFlat = false;
return true;
}
bool Weather::initProperties()
{
DefaultDevice::initProperties();
WI::initProperties(MAIN_CONTROL_TAB, PARAMETERS_TAB);
// Location
IUFillNumber(&LocationN[LOCATION_LATITUDE], "LAT", "Lat (dd:mm:ss)", "%010.6m", -90, 90, 0, 0.0);
IUFillNumber(&LocationN[LOCATION_LONGITUDE], "LONG", "Lon (dd:mm:ss)", "%010.6m", 0, 360, 0, 0.0);
IUFillNumber(&LocationN[LOCATION_ELEVATION], "ELEV", "Elevation (m)", "%g", -200, 10000, 0, 0);
IUFillNumberVector(&LocationNP, LocationN, 3, getDeviceName(), "GEOGRAPHIC_COORD", "Location", SITE_TAB, IP_RW, 60,
IPS_OK);
// Active Devices
IUFillText(&ActiveDeviceT[0], "ACTIVE_GPS", "GPS", "GPS Simulator");
IUFillTextVector(&ActiveDeviceTP, ActiveDeviceT, 1, getDeviceName(), "ACTIVE_DEVICES", "Snoop devices", OPTIONS_TAB,
IP_RW, 60, IPS_IDLE);
// Update Period
IUFillNumber(&UpdatePeriodN[0], "PERIOD", "Period (secs)", "%4.2f", 0, 3600, 60, 60);
IUFillNumberVector(&UpdatePeriodNP, UpdatePeriodN, 1, getDeviceName(), "WEATHER_UPDATE", "Update", MAIN_CONTROL_TAB,
IP_RW, 60, IPS_IDLE);
// Refresh
IUFillSwitch(&RefreshS[0], "REFRESH", "Refresh", ISS_OFF);
IUFillSwitchVector(&RefreshSP, RefreshS, 1, getDeviceName(), "WEATHER_REFRESH", "Weather", MAIN_CONTROL_TAB, IP_RW,
ISR_ATMOST1, 0, IPS_IDLE);
// Override
IUFillSwitch(&OverrideS[0], "OVERRIDE", "Override Status", ISS_OFF);
IUFillSwitchVector(&OverrideSP, OverrideS, 1, getDeviceName(), "WEATHER_OVERRIDE", "Safety", MAIN_CONTROL_TAB, IP_RW,
ISR_NOFMANY, 0, IPS_IDLE);
IDSnoopDevice(ActiveDeviceT[0].text, "GEOGRAPHIC_COORD");
if (weatherConnection & CONNECTION_SERIAL)
{
serialConnection = new Connection::Serial(this);
serialConnection->registerHandshake([&]()
{
return callHandshake();
});
registerConnection(serialConnection);
}
if (weatherConnection & CONNECTION_TCP)
{
tcpConnection = new Connection::TCP(this);
tcpConnection->registerHandshake([&]()
{
return callHandshake();
});
registerConnection(tcpConnection);
}
setDriverInterface(WEATHER_INTERFACE);
return true;
}
WatchDog::WatchDog()
{
setVersion(0, 2);
setDriverInterface(AUX_INTERFACE);
watchdogClient = new WatchDogClient();
watchDogTimer = -1;
shutdownStage = WATCHDOG_IDLE;
}
bool QSICCD::initProperties()
{
// Init parent properties first
INDI::CCD::initProperties();
IUFillSwitch(&CoolerS[0], "COOLER_ON", "ON", ISS_OFF);
IUFillSwitch(&CoolerS[1], "COOLER_OFF", "OFF", ISS_ON);
IUFillSwitchVector(&CoolerSP, CoolerS, 2, getDeviceName(), "CCD_COOLER", "Cooler", MAIN_CONTROL_TAB, IP_WO,
ISR_1OFMANY, 0, IPS_IDLE);
IUFillSwitch(&ShutterS[0], "SHUTTER_ON", "Manual open", ISS_OFF);
IUFillSwitch(&ShutterS[1], "SHUTTER_OFF", "Manual close", ISS_OFF);
IUFillSwitchVector(&ShutterSP, ShutterS, 2, getDeviceName(), "CCD_SHUTTER", "Shutter", MAIN_CONTROL_TAB, IP_WO,
ISR_1OFMANY, 0, IPS_IDLE);
IUFillNumber(&CoolerN[0], "CCD_COOLER_VALUE", "Cooling Power (%)", "%+06.2f", 0., 1., .2, 0.0);
IUFillNumberVector(&CoolerNP, CoolerN, 1, getDeviceName(), "CCD_COOLER_POWER", "Cooling Power", MAIN_CONTROL_TAB,
IP_RO, 60, IPS_IDLE);
IUFillSwitch(&ReadOutS[0], "QUALITY_HIGH", "High Quality", ISS_ON);
IUFillSwitch(&ReadOutS[1], "QUALITY_LOW", "Fast", ISS_OFF);
IUFillSwitchVector(&ReadOutSP, ReadOutS, 2, getDeviceName(), "READOUT_QUALITY", "Readout Speed", OPTIONS_TAB, IP_WO,
ISR_1OFMANY, 0, IPS_IDLE);
IUFillSwitch(&FilterS[0], "FILTER_CW", "+", ISS_OFF);
IUFillSwitch(&FilterS[1], "FILTER_CCW", "-", ISS_OFF);
IUFillSwitchVector(&FilterSP, FilterS, 2, getDeviceName(), "FILTER_WHEEL_MOTION", "Turn Wheel", FILTER_TAB, IP_RW,
ISR_1OFMANY, 60, IPS_IDLE);
IUFillSwitch(&GainS[GAIN_HIGH], "High", "", ISS_ON);
IUFillSwitch(&GainS[GAIN_LOW], "Low", "", ISS_OFF);
IUFillSwitch(&GainS[GAIN_AUTO], "Auto", "", ISS_OFF);
IUFillSwitchVector(&GainSP, GainS, 3, getDeviceName(), "Gain", "", OPTIONS_TAB, IP_RW, ISR_1OFMANY, 60, IPS_IDLE);
IUFillSwitch(&FanS[0], "Off", "", ISS_OFF);
IUFillSwitch(&FanS[1], "Quiet", "", ISS_OFF);
IUFillSwitch(&FanS[2], "Full", "", ISS_ON);
IUFillSwitchVector(&FanSP, FanS, 3, getDeviceName(), "Fan", "", MAIN_CONTROL_TAB, IP_RW, ISR_1OFMANY, 60, IPS_IDLE);
IUFillSwitch(&ABS[0], "Normal", "", ISS_ON);
IUFillSwitch(&ABS[1], "High", "", ISS_OFF);
IUFillSwitchVector(&ABSP, ABS, 2, getDeviceName(), "AntiBlooming", "", OPTIONS_TAB, IP_RW, ISR_1OFMANY, 60,
IPS_IDLE);
INDI::FilterInterface::initProperties(FILTER_TAB);
addDebugControl();
setDriverInterface(getDriverInterface() | FILTER_INTERFACE);
return true;
}
bool GPhotoCCD::initProperties()
{
// Init parent properties first
INDI::CCD::initProperties();
initFocuserProperties(getDeviceName(), FOCUS_TAB);
IUFillText(&mPortT[0], "PORT" , "Port", "");
IUFillTextVector(&PortTP, mPortT, NARRAY(mPortT), getDeviceName(), "DEVICE_PORT" , "Shutter Release", MAIN_CONTROL_TAB, IP_RW, 0, IPS_IDLE);
IUFillNumber(&mMirrorLockN[0], "MIRROR_LOCK_SECONDS" , "Seconds", "%1.0f", 0, 10, 1, 0);
IUFillNumberVector(&mMirrorLockNP, mMirrorLockN, 1, getDeviceName(), "MIRROR_LOCK" , "Mirror Lock", MAIN_CONTROL_TAB, IP_RW, 60, IPS_IDLE);
//We don't know how many items will be in the switch yet
IUFillSwitchVector(&mIsoSP, NULL, 0, getDeviceName(), "CCD_ISO", "ISO", IMAGE_SETTINGS_TAB, IP_RW, ISR_1OFMANY, 60, IPS_IDLE);
IUFillSwitchVector(&mFormatSP, NULL, 0, getDeviceName(), "CAPTURE_FORMAT", "Capture Format", IMAGE_SETTINGS_TAB, IP_RW, ISR_1OFMANY, 60, IPS_IDLE);
IUFillSwitch(&autoFocusS[0], "Set", "", ISS_OFF);
IUFillSwitchVector(&autoFocusSP, autoFocusS, 1, getDeviceName(), "Auto Focus", "", FOCUS_TAB, IP_RW, ISR_1OFMANY, 0, IPS_IDLE);
IUFillSwitch(&transferFormatS[0], "FITS", "", ISS_ON);
IUFillSwitch(&transferFormatS[1], "Native", "", ISS_OFF);
IUFillSwitchVector(&transferFormatSP, transferFormatS, 2, getDeviceName(), "Transfer Format", "", IMAGE_SETTINGS_TAB, IP_RW, ISR_1OFMANY, 0, IPS_IDLE);
IUFillSwitch(&livePreviewS[0], "Enable", "", ISS_OFF);
IUFillSwitch(&livePreviewS[1], "Disable", "", ISS_ON);
IUFillSwitchVector(&livePreviewSP, livePreviewS, 2, getDeviceName(), "VIDEO_STREAM", "Preview", MAIN_CONTROL_TAB, IP_RW, ISR_1OFMANY, 0, IPS_IDLE);
PrimaryCCD.setMinMaxStep("CCD_EXPOSURE", "CCD_EXPOSURE_VALUE", 0.001, 3600, 1, false);
// Most cameras have this by default, so let's set it as default.
IUSaveText(&BayerT[2], "RGGB");
SetCCDCapability(CCD_CAN_SUBFRAME | CCD_HAS_BAYER);
SetFocuserCapability(FOCUSER_HAS_VARIABLE_SPEED);
FocusSpeedN[0].min=0;
FocusSpeedN[0].max=3;
FocusSpeedN[0].step=1;
FocusSpeedN[0].value=1;
/* JM 2014-05-20 Make PrimaryCCD.ImagePixelSizeNP writable since we can't know for now the pixel size and bit depth from gphoto */
PrimaryCCD.getCCDInfo()->p = IP_RW;
setDriverInterface(getDriverInterface() | FOCUSER_INTERFACE);
gphoto_set_debug(getDeviceName());
gphoto_read_set_debug(getDeviceName());
return true;
}
bool MICCD::initProperties()
{
INDI::CCD::initProperties();
INDI::FilterInterface::initProperties(FILTER_TAB);
FilterSlotN[0].min = 1;
FilterSlotN[0].max = numFilters;
// Temp ram
IUFillNumber(&TemperatureRampN[0], "TEMP_RAMP", "Max. dT (C/min)", "%2.0f", 0, 30, 1, 2);
IUFillNumberVector(&TemperatureRampNP, TemperatureRampN, 1, getDeviceName(), "CCD_TEMP_RAMP", "Temp. Ramp",
MAIN_CONTROL_TAB, IP_WO, 60, IPS_IDLE);
// CCD Regulation power
IUFillNumber(&CoolerN[0], "CCD_COOLER_VALUE", "Cooling Power (%)", "%+6.2f", 0.0, 1.0, 0.01, 0.0);
IUFillNumberVector(&CoolerNP, CoolerN, 1, getDeviceName(), "CCD_COOLER_POWER", "Cooling Power", MAIN_CONTROL_TAB,
IP_RO, 60, IPS_IDLE);
// CCD Fan
IUFillNumber(&FanN[0], "FAN", "Fan speed", "%2.0f", 0, maxFanValue, 1, 0);
IUFillNumberVector(&FanNP, FanN, 1, getDeviceName(), "CCD_FAN", "Fan", MAIN_CONTROL_TAB, IP_WO, 60, IPS_IDLE);
// CCD Window heating
IUFillNumber(&WindowHeatingN[0], "WINDOW_HEATING", "Heating Intensity", "%2.0f", 0, maxHeatingValue, 1, 0);
IUFillNumberVector(&WindowHeatingNP, WindowHeatingN, 1, getDeviceName(), "CCD_WINDOW_HEATING", "Window Heating",
MAIN_CONTROL_TAB, IP_WO, 60, IPS_IDLE);
// CCD Gain
IUFillNumber(&GainN[0], "GAIN", "Gain (e-/ADU)", "%2.2f", 0, 100, 1, 0);
IUFillNumberVector(&GainNP, GainN, 1, getDeviceName(), "CCD_GAIN", "Gain", MAIN_CONTROL_TAB, IP_RO, 60, IPS_IDLE);
// Noise mode
IUFillSwitch(&ReadModeS[0], "PREVIEW", "Preview", ISS_OFF);
IUFillSwitch(&ReadModeS[1], "LOW_NOISE", "Low noise", numReadModes == 2 ? ISS_ON : ISS_OFF);
IUFillSwitch(&ReadModeS[2], "ULTA_LOW_NOISE", "Ultra low noise", numReadModes == 3 ? ISS_ON : ISS_OFF);
IUFillSwitchVector(&ReadModeSP, ReadModeS, numReadModes, getDeviceName(), "CCD_READ_MODE", "Read Mode",
MAIN_CONTROL_TAB, IP_RW, ISR_1OFMANY, 0, IPS_IDLE);
// NIR Preflash
IUFillNumber(&PreflashN[0], "NIR_EXPOSURE_TIME", "Preflash duration (s)", "%4.3f", 0.0, 65.535, 0.001, 0.0);
IUFillNumber(&PreflashN[1], "NIR_CLEAR_NUM", "Num. clear", "%2.0f", 1, 16, 1, 3);
IUFillNumberVector(&PreflashNP, PreflashN, 2, getDeviceName(), "NIR_PRE_FLASH", "NIR Preflash",
MAIN_CONTROL_TAB, IP_RW, 60, IPS_IDLE);
addAuxControls();
setDriverInterface(getDriverInterface() | FILTER_INTERFACE);
return true;
}
bool QHYCCD::initProperties()
{
INDI::CCD::initProperties();
INDI::FilterInterface::initProperties(FILTER_TAB);
FilterSlotN[0].min = 1;
FilterSlotN[0].max = 9;
// CCD Cooler Switch
IUFillSwitch(&CoolerS[0], "COOLER_ON", "On", ISS_OFF);
IUFillSwitch(&CoolerS[1], "COOLER_OFF", "Off", ISS_ON);
IUFillSwitchVector(&CoolerSP, CoolerS, 2, getDeviceName(), "CCD_COOLER", "Cooler", MAIN_CONTROL_TAB, IP_RW,
ISR_1OFMANY, 0, IPS_IDLE);
// CCD Regulation power
IUFillNumber(&CoolerN[0], "CCD_COOLER_VALUE", "Cooling Power (%)", "%+06.2f", 0., 1., .2, 0.0);
IUFillNumberVector(&CoolerNP, CoolerN, 1, getDeviceName(), "CCD_COOLER_POWER", "Cooling Power", MAIN_CONTROL_TAB,
IP_RO, 60, IPS_IDLE);
// CCD Gain
IUFillNumber(&GainN[0], "GAIN", "Gain", "%3.0f", 0, 100, 1, 11);
IUFillNumberVector(&GainNP, GainN, 1, getDeviceName(), "CCD_GAIN", "Gain", MAIN_CONTROL_TAB, IP_RW, 60, IPS_IDLE);
// CCD Offset
IUFillNumber(&OffsetN[0], "Offset", "Offset", "%3.0f", 0, 0, 1, 0);
IUFillNumberVector(&OffsetNP, OffsetN, 1, getDeviceName(), "CCD_OFFSET", "Offset", MAIN_CONTROL_TAB, IP_RW, 60,
IPS_IDLE);
// USB Speed
IUFillNumber(&SpeedN[0], "Speed", "Speed", "%3.0f", 0, 0, 1, 0);
IUFillNumberVector(&SpeedNP, SpeedN, 1, getDeviceName(), "USB_SPEED", "USB Speed", MAIN_CONTROL_TAB, IP_RW, 60,
IPS_IDLE);
// USB Traffic
IUFillNumber(&USBTrafficN[0], "Speed", "Speed", "%3.0f", 0, 0, 1, 0);
IUFillNumberVector(&USBTrafficNP, USBTrafficN, 1, getDeviceName(), "USB_TRAFFIC", "USB Traffic", MAIN_CONTROL_TAB,
IP_RW, 60, IPS_IDLE);
// Set minimum exposure speed to 0.001 seconds
//PrimaryCCD.setMinMaxStep("CCD_EXPOSURE", "CCD_EXPOSURE_VALUE", MINIMUM_CCD_EXPOSURE, 3600, 1, false);
addAuxControls();
setDriverInterface(getDriverInterface() | FILTER_INTERFACE);
return true;
}
/* Initialize and setup all properties on startup. */
bool ShelyakEshel::initProperties()
{
INDI::DefaultDevice::initProperties();
//--------------------------------------------------------------------------------
// Calibration Unit
//--------------------------------------------------------------------------------
// setup the mirror switch
IUFillSwitch(&MirrorS[0], "ACTIVATED", "Activated", ISS_OFF);
IUFillSwitch(&MirrorS[1], "DEACTIVATED", "Deactivated", ISS_ON);
IUFillSwitchVector(&MirrorSP, MirrorS, 2, getDeviceName(), "FLIP_MIRROR", "Flip mirror", CALIBRATION_UNIT_TAB,
IP_RW, ISR_1OFMANY, 0, IPS_IDLE);
// setup the lamp switches
IUFillSwitch(&LampS[0], "LED", "LED", ISS_OFF);
IUFillSwitch(&LampS[1], "THAR", "ThAr", ISS_OFF);
IUFillSwitch(&LampS[2], "TUNGSTEN", "Tungsten", ISS_OFF);
IUFillSwitchVector(&LampSP, LampS, 3, getDeviceName(), "CALIB_LAMPS", "Calibration lamps", CALIBRATION_UNIT_TAB,
IP_RW, ISR_NOFMANY, 0, IPS_IDLE);
//--------------------------------------------------------------------------------
// Options
//--------------------------------------------------------------------------------
// setup the text input for the serial port
IUFillText(&PortT[0], "PORT", "Port", "/dev/ttyUSB0");
IUFillTextVector(&PortTP, PortT, 1, getDeviceName(), "DEVICE_PORT", "Ports", OPTIONS_TAB, IP_RW, 60, IPS_IDLE);
//--------------------------------------------------------------------------------
// Spectrograph Settings
//--------------------------------------------------------------------------------
IUFillNumber(&SettingsN[0], "GRATING", "Grating [lines/mm]", "%.2f", 0, 1000, 0, 79);
IUFillNumber(&SettingsN[1], "INCIDENCE_ANGLE_ALPHA", "Incidence angle alpha [degrees]", "%.2f", 0, 90, 0, 62.2);
IUFillNumber(&SettingsN[2], "DIFFRACTION_ANGLE_BETA", "Diffraction angle beta [degrees]", "%.2f", 0, 90, 0, 0);
IUFillNumber(&SettingsN[3], "SHIFT_ANGLE_GAMMA", "Shift angle gamma [degrees]", "%.2f", 0, 90, 0, 5.75);
IUFillNumber(&SettingsN[4], "OBJ_FOCAL", "Obj Focal [mm]", "%.0f", 1, 700, 0, 85);
IUFillNumberVector(&SettingsNP, SettingsN, 5, getDeviceName(), "SPECTROGRAPH_SETTINGS", "Spectrograph settings",
SPECTROGRAPH_SETTINGS_TAB, IP_RW, 60, IPS_IDLE);
setDriverInterface(SPECTROGRAPH_INTERFACE);
return true;
}
bool MICCD::initProperties()
{
INDI::CCD::initProperties();
initFilterProperties(getDeviceName(), FILTER_TAB);
FilterSlotN[0].min = 1;
FilterSlotN[0].max = numFilters;
// Temp ram
IUFillNumber(&TemperatureRampN[0], "TEMP_RAMP", "Max. dT (C/min)", "%2.0f", 0, 30, 1, 2);
IUFillNumberVector(&TemperatureRampNP, TemperatureRampN, 1, getDeviceName(), "CCD_TEMP_RAMP", "Temp. ramp", MAIN_CONTROL_TAB, IP_WO, 60, IPS_IDLE);
// CCD Regulation power
IUFillNumber(&CoolerN[0], "CCD_COOLER_VALUE", "Cooling Power (%)", "%+6.2f", 0.0, 1.0, 0.01, 0.0);
IUFillNumberVector(&CoolerNP, CoolerN, 1, getDeviceName(), "CCD_COOLER_POWER", "Cooling Power", MAIN_CONTROL_TAB, IP_RO, 60, IPS_IDLE);
// CCD Fan
IUFillNumber(&FanN[0], "FAN", "Fan speed", "%2.0f", 0, maxFanValue, 1, 0);
IUFillNumberVector(&FanNP, FanN, 1, getDeviceName(), "CCD_FAN", "Fan", MAIN_CONTROL_TAB, IP_WO, 60, IPS_IDLE);
// CCD Window heating
IUFillNumber(&WindowHeatingN[0], "WINDOW_HEATING", "Heating intensity", "%2.0f", 0, maxHeatingValue, 1, 0);
IUFillNumberVector(&WindowHeatingNP, WindowHeatingN, 1, getDeviceName(), "CCD_WINDOW_HEATING", "Heating", MAIN_CONTROL_TAB, IP_WO, 60, IPS_IDLE);
// CCD Gain
IUFillNumber(&GainN[0], "GAIN", "Gain (e-/ADU)", "%2.2f", 0, 100, 1, 0);
IUFillNumberVector(&GainNP, GainN, 1, getDeviceName(), "CCD_GAIN", "Gain", MAIN_CONTROL_TAB, IP_RO, 60, IPS_IDLE);
// Noise mode
IUFillSwitch(&NoiseS[0], "NORMAL_NOISE", "Normal", ISS_ON);
IUFillSwitch(&NoiseS[1], "LOW_NOISE", "Low", ISS_OFF);
IUFillSwitch(&NoiseS[2], "ULTA_LOW_NOISE", "Ultra low", ISS_OFF);
IUFillSwitchVector(&NoiseSP, NoiseS, numReadModes, getDeviceName(), "CCD_NOISE", "Noise", MAIN_CONTROL_TAB, IP_RW, ISR_1OFMANY, 0, IPS_IDLE);
addAuxControls();
setDriverInterface(getDriverInterface() | FILTER_INTERFACE);
return true;
}
bool FlipFlat::Handshake()
{
if (isSimulation())
{
LOGF_INFO("Connected successfuly to simulated %s. Retrieving startup data...", getDeviceName());
SetTimer(POLLMS);
setDriverInterface(AUX_INTERFACE | LIGHTBOX_INTERFACE | DUSTCAP_INTERFACE);
isFlipFlat = true;
return true;
}
PortFD = serialConnection->getPortFD();
/* Drop RTS */
int i = 0;
i |= TIOCM_RTS;
if (ioctl(PortFD, TIOCMBIC, &i) != 0)
{
LOGF_ERROR("IOCTL error %s.", strerror(errno));
return false;
}
i |= TIOCM_RTS;
if (ioctl(PortFD, TIOCMGET, &i) != 0)
{
LOGF_ERROR("IOCTL error %s.", strerror(errno));
return false;
}
if (!ping())
{
LOG_ERROR("Device ping failed.");
return false;
}
return true;
}
bool QikFlat::initProperties()
{
INDI::DefaultDevice::initProperties();
// Device port
//IUFillText(&PortT[0],"PORT","Port","/dev/ttyUSB0");
//IUFillTextVector(&PortTP,PortT,1,getDeviceName(),"DEVICE_PORT","Ports",OPTIONS_TAB,IP_RW,60,IPS_IDLE);
// Firmware version
IUFillText(&FirmwareT[0],"Version","",NULL);
IUFillTextVector(&FirmwareTP,FirmwareT,1,getDeviceName(),"Firmware","",MAIN_CONTROL_TAB,IP_RO,60,IPS_IDLE);
initLightBoxProperties(getDeviceName(), MAIN_CONTROL_TAB);
LightIntensityN[0].min = 0;
LightIntensityN[0].max = 255;
LightIntensityN[0].step = 10;
setDriverInterface(AUX_INTERFACE | LIGHTBOX_INTERFACE);
addDebugControl();
return true;
}
bool INDI::FilterWheel::initProperties()
{
DefaultDevice::initProperties();
initFilterProperties(getDeviceName(), FILTER_TAB);
controller->mapController("Change Filter","Change Filter", INDI::Controller::CONTROLLER_JOYSTICK, "JOYSTICK_1");
controller->mapController("Reset", "Reset", INDI::Controller::CONTROLLER_BUTTON, "BUTTON_1");
controller->initProperties();
setDriverInterface(FILTER_INTERFACE);
if (filterConnection & CONNECTION_SERIAL)
{
serialConnection = new Connection::Serial(this);
serialConnection->registerHandshake([&]()
{
return callHandshake();
});
registerConnection(serialConnection);
}
if (filterConnection & CONNECTION_TCP)
{
tcpConnection = new Connection::TCP(this);
tcpConnection->registerHandshake([&]()
{
return callHandshake();
});
registerConnection(tcpConnection);
}
return true;
}
bool ATIKCCD::setupParams()
{
ARTEMISPROPERTIES pProp;
int rc = ArtemisProperties(hCam, &pProp);
if (rc != ARTEMIS_OK)
{
LOGF_ERROR("Failed to inquire camera properties (%d)", rc);
return false;
}
// Camera & Pixel properties
// FIXME is it always 16bit depth?
SetCCDParams(pProp.nPixelsX, pProp.nPixelsY, 16, pProp.PixelMicronsX, pProp.PixelMicronsY);
// Set frame buffer size
PrimaryCCD.setFrameBufferSize(PrimaryCCD.getXRes() * PrimaryCCD.getYRes() * PrimaryCCD.getBPP() / 8, false);
m_CameraFlags = pProp.cameraflags;
LOGF_DEBUG("Camera flags: %d", m_CameraFlags);
int binX = 1, binY = 1;
rc = ArtemisGetMaxBin(hCam, &binX, &binY);
if (rc != ARTEMIS_OK)
{
LOGF_ERROR("Failed to inquire camera max binning (%d)", rc);
}
PrimaryCCD.setMinMaxStep("CCD_EXPOSURE", "CCD_EXPOSURE_VALUE", 0.001, 3600, 1, false);
PrimaryCCD.setMinMaxStep("CCD_BINNING", "HOR_BIN", 1, binX, 1, false);
PrimaryCCD.setMinMaxStep("CCD_BINNING", "VER_BIN", 1, binY, 1, false);
IUSaveText(&VersionInfoS[VERSION_FIRMWARE], std::to_string(pProp.Protocol).c_str());
LOGF_INFO("Detected camera %s %s with firmware %s", pProp.Manufacturer, pProp.Description, std::to_string(pProp.Protocol).c_str());
uint32_t cap = 0;
// All Atik cameras can abort and subframe
cap = CCD_CAN_ABORT | CCD_CAN_SUBFRAME;
// Can we bin?
if (binX > 1)
{
cap |= CCD_CAN_BIN;
LOG_DEBUG("Camera can bin.");
}
// Do we have color or mono camera?
ARTEMISCOLOURTYPE colorType;
rc = ArtemisColourProperties(hCam, &colorType, &normalOffsetX, &normalOffsetY, &previewOffsetX, &previewOffsetY);
if (rc != ARTEMIS_OK)
{
LOGF_ERROR("Failed to inquire camera color (%d). Assuming Mono.", rc);
}
if (colorType == ARTEMIS_COLOUR_RGGB)
{
cap |= CCD_HAS_BAYER;
IUSaveText(&BayerT[0], std::to_string(normalOffsetX).c_str());
IUSaveText(&BayerT[1], std::to_string(normalOffsetY).c_str());
}
LOGF_DEBUG("Camera is %s.", colorType == ARTEMIS_COLOUR_RGGB ? "Color" : "Mono");
// Do we have temperature?
rc = ArtemisTemperatureSensorInfo(hCam, 0, &m_TemperatureSensorsCount);
LOGF_DEBUG("Camera has %d temperature sensor(s).", m_TemperatureSensorsCount);
if (m_TemperatureSensorsCount > 0)
{
// Do we have cooler control?
int flags, level, minlvl, maxlvl, setpoint;
rc = ArtemisCoolingInfo(hCam, &flags, &level, &minlvl, &maxlvl, &setpoint);
if (flags & 0x1)
{
LOG_DEBUG("Camera supports cooling control.");
cap |= CCD_HAS_COOLER;
}
genTimerID = SetTimer(TEMP_TIMER_MS);
}
// Do we have mechanical shutter?
if (m_CameraFlags & ARTEMIS_PROPERTIES_CAMERAFLAGS_HAS_SHUTTER)
{
LOG_DEBUG("Camera has mechanical shutter.");
cap |= CCD_HAS_SHUTTER;
}
// Do we have guide port?
if (m_CameraFlags & ARTEMIS_PROPERTIES_CAMERAFLAGS_HAS_GUIDE_PORT)
{
LOG_DEBUG("Camera has guide port.");
cap |= CCD_HAS_ST4_PORT;
}
// Done with the capabilities!
SetCCDCapability(cap);
// Check if camra has internal filter wheel
if (m_CameraFlags & ARTEMIS_PROPERTIES_CAMERAFLAGS_HAS_FILTERWHEEL)
{
int numFilters, moving, currentPos, targetPos;
rc = ArtemisFilterWheelInfo(hCam, &numFilters, &moving, ¤tPos, &targetPos);
if (rc != ARTEMIS_OK)
{
LOGF_ERROR("Failed to inquire internal filter wheel info (%d). Filter wheel functions are disabled.", rc);
}
else
{
setDriverInterface(getDriverInterface() | FILTER_INTERFACE);
FilterSlotN[0].min = 1;
FilterSlotN[0].max = numFilters;
LOGF_INFO("Detected %d-position internal filter wheel.", numFilters);
}
}
// Check if we have Horizon camera
m_isHorizon = ArtemisHasCameraSpecificOption(hCam, 1);
if (m_isHorizon)
{
uint8_t data[2] = {0};
int len = 0, index = 0;
ArtemisCameraSpecificOptionGetData(hCam, ID_AtikHorizonGOPresetMode, data, 2, &len);
index = *(reinterpret_cast<uint16_t*>(&data));
LOGF_DEBUG("Horizon current GO mode: data[0] %d data[1] %d index %d", data[0], data[1], index);
IUResetSwitch(&ControlPresetsSP);
ControlPresetsS[index].s = ISS_ON;
// Get Gain & Offset valuse
ArtemisCameraSpecificOptionGetData(hCam, ID_AtikHorizonGOCustomGain, data, 2, &len);
index = *(reinterpret_cast<uint16_t*>(&data));
LOGF_DEBUG("Horizon current gain: data[0] %d data[1] %d value %d", data[0], data[1], index);
ArtemisCameraSpecificOptionGetData(hCam, ID_AtikHorizonGOCustomOffset, data, 2, &len);
index = *(reinterpret_cast<uint16_t*>(&data));
LOGF_DEBUG("Horizon current offset: data[0] %d data[1] %d value %d", data[0], data[1], index);
}
// Create imaging thread
threadRequest = StateIdle;
threadState = StateNone;
int stat = pthread_create(&imagingThread, nullptr, &imagingHelper, this);
if (stat != 0)
{
LOGF_ERROR("Error creating imaging thread (%d)", stat);
return false;
}
pthread_mutex_lock(&condMutex);
while (threadState == StateNone)
{
pthread_cond_wait(&cv, &condMutex);
}
pthread_mutex_unlock(&condMutex);
return true;
}
bool SynscanDriver::initProperties()
{
INDI::Telescope::initProperties();
SetTelescopeCapability(TELESCOPE_CAN_PARK | TELESCOPE_CAN_ABORT | TELESCOPE_CAN_SYNC | TELESCOPE_CAN_GOTO |
TELESCOPE_HAS_TIME | TELESCOPE_HAS_LOCATION | TELESCOPE_HAS_PIER_SIDE | TELESCOPE_CAN_CONTROL_TRACK |
TELESCOPE_HAS_TRACK_MODE, 10);
SetParkDataType(PARK_RA_DEC_ENCODER);
// Slew Rates
strncpy(SlewRateS[0].label, "1x", MAXINDILABEL);
strncpy(SlewRateS[1].label, "8x", MAXINDILABEL);
strncpy(SlewRateS[2].label, "16x", MAXINDILABEL);
strncpy(SlewRateS[3].label, "32x", MAXINDILABEL);
strncpy(SlewRateS[4].label, "64x", MAXINDILABEL);
strncpy(SlewRateS[5].label, "128x", MAXINDILABEL);
strncpy(SlewRateS[6].label, "400x", MAXINDILABEL);
strncpy(SlewRateS[7].label, "600x", MAXINDILABEL);
strncpy(SlewRateS[8].label, "Max", MAXINDILABEL);
strncpy(SlewRateS[9].label, "Custom", MAXINDILABEL);
IUResetSwitch(&SlewRateSP);
// Max is the default
SlewRateS[8].s = ISS_ON;
//////////////////////////////////////////////////////////////////////////////////////////////////
/// Mount Info Text Property
//////////////////////////////////////////////////////////////////////////////////////////////////
IUFillText(&StatusT[MI_FW_VERSION], "MI_FW_VERSION", "Firmware", "-");
IUFillText(&StatusT[MI_MOUNT_MODEL], "MI_MOUNT_MODEL", "Model", "-");
IUFillText(&StatusT[MI_GOTO_STATUS], "MI_GOTO_STATUS", "Goto", "-");
IUFillText(&StatusT[MI_POINT_STATUS], "MI_POINT_STATUS", "Pointing", "-");
IUFillText(&StatusT[MI_TRACK_MODE], "MI_TRACK_MODE", "Tracking Mode", "-");
IUFillTextVector(&StatusTP, StatusT, 5, getDeviceName(), "MOUNT_STATUS",
"Status", MOUNT_TAB, IP_RO, 60, IPS_IDLE);
//////////////////////////////////////////////////////////////////////////////////////////////////
/// Custom Slew Rate
//////////////////////////////////////////////////////////////////////////////////////////////////
IUFillNumber(&CustomSlewRateN[AXIS_RA], "AXIS1", "RA/AZ (arcsecs/s)", "%.2f", 0.05, 800, 10, 0);
IUFillNumber(&CustomSlewRateN[AXIS_DE], "AXIS2", "DE/AL (arcsecs/s)", "%.2f", 0.05, 800, 10, 0);
IUFillNumberVector(&CustomSlewRateNP, CustomSlewRateN, 2, getDeviceName(), "CUSTOM_SLEW_RATE", "Custom Slew", MOTION_TAB, IP_RW, 60, IPS_IDLE);
//////////////////////////////////////////////////////////////////////////////////////////////////
/// Guide Rate
//////////////////////////////////////////////////////////////////////////////////////////////////
IUFillNumber(&GuideRateN[AXIS_RA], "GUIDE_RATE_WE", "W/E Rate", "%.2f", 0, 1, 0.1, 0.5);
IUFillNumber(&GuideRateN[AXIS_DE], "GUIDE_RATE_NS", "N/S Rate", "%.2f", 0, 1, 0.1, 0.5);
IUFillNumberVector(&GuideRateNP, GuideRateN, 2, getDeviceName(), "GUIDE_RATE", "Guiding Rate", GUIDE_TAB, IP_RW, 0, IPS_IDLE);
//////////////////////////////////////////////////////////////////////////////////////////////////
/// Horizontal Coords
//////////////////////////////////////////////////////////////////////////////////////////////////
IUFillNumber(&HorizontalCoordsN[AXIS_AZ], "AZ", "Az D:M:S", "%10.6m", 0.0, 360.0, 0.0, 0);
IUFillNumber(&HorizontalCoordsN[AXIS_ALT], "ALT", "Alt D:M:S", "%10.6m", -90., 90.0, 0.0, 0);
IUFillNumberVector(&HorizontalCoordsNP, HorizontalCoordsN, 2, getDeviceName(), "HORIZONTAL_COORD",
"Horizontal Coord", MAIN_CONTROL_TAB, IP_RW, 0, IPS_IDLE);
AddTrackMode("TRACK_ALTAZ", "Alt/Az");
AddTrackMode("TRACK_EQ", "Equatorial", true);
AddTrackMode("TRACK_PEC", "PEC Mode");
SetParkDataType(PARK_AZ_ALT);
// Initialize guiding properties.
initGuiderProperties(getDeviceName(), GUIDE_TAB);
addAuxControls();
//GUIDE Set guider interface.
setDriverInterface(getDriverInterface() | GUIDER_INTERFACE);
return true;
}
bool ScopeSim::initProperties()
{
/* Make sure to init parent properties first */
INDI::Telescope::initProperties();
/* Simulated periodic error in RA, DEC */
IUFillNumber(&EqPEN[RA_AXIS], "RA_PE", "RA (hh:mm:ss)", "%010.6m", 0, 24, 0, 15.);
IUFillNumber(&EqPEN[DEC_AXIS], "DEC_PE", "DEC (dd:mm:ss)", "%010.6m", -90, 90, 0, 15.);
IUFillNumberVector(&EqPENV, EqPEN, 2, getDeviceName(), "EQUATORIAL_PE", "Periodic Error", MOTION_TAB, IP_RO, 60,
IPS_IDLE);
/* Enable client to manually add periodic error northward or southward for simulation purposes */
IUFillSwitch(&PEErrNSS[DIRECTION_NORTH], "PE_N", "North", ISS_OFF);
IUFillSwitch(&PEErrNSS[DIRECTION_SOUTH], "PE_S", "South", ISS_OFF);
IUFillSwitchVector(&PEErrNSSP, PEErrNSS, 2, getDeviceName(), "PE_NS", "PE N/S", MOTION_TAB, IP_RW, ISR_ATMOST1, 60,
IPS_IDLE);
/* Enable client to manually add periodic error westward or easthward for simulation purposes */
IUFillSwitch(&PEErrWES[DIRECTION_WEST], "PE_W", "West", ISS_OFF);
IUFillSwitch(&PEErrWES[DIRECTION_EAST], "PE_E", "East", ISS_OFF);
IUFillSwitchVector(&PEErrWESP, PEErrWES, 2, getDeviceName(), "PE_WE", "PE W/E", MOTION_TAB, IP_RW, ISR_ATMOST1, 60,
IPS_IDLE);
/* How fast do we guide compared to sidereal rate */
IUFillNumber(&GuideRateN[RA_AXIS], "GUIDE_RATE_WE", "W/E Rate", "%g", 0, 1, 0.1, 0.3);
IUFillNumber(&GuideRateN[DEC_AXIS], "GUIDE_RATE_NS", "N/S Rate", "%g", 0, 1, 0.1, 0.3);
IUFillNumberVector(&GuideRateNP, GuideRateN, 2, getDeviceName(), "GUIDE_RATE", "Guiding Rate", MOTION_TAB, IP_RW, 0,
IPS_IDLE);
IUFillSwitch(&SlewRateS[SLEW_GUIDE], "SLEW_GUIDE", "Guide", ISS_OFF);
IUFillSwitch(&SlewRateS[SLEW_CENTERING], "SLEW_CENTERING", "Centering", ISS_OFF);
IUFillSwitch(&SlewRateS[SLEW_FIND], "SLEW_FIND", "Find", ISS_OFF);
IUFillSwitch(&SlewRateS[SLEW_MAX], "SLEW_MAX", "Max", ISS_ON);
IUFillSwitchVector(&SlewRateSP, SlewRateS, 4, getDeviceName(), "TELESCOPE_SLEW_RATE", "Slew Rate", MOTION_TAB,
IP_RW, ISR_1OFMANY, 0, IPS_IDLE);
// Add Tracking Modes
AddTrackMode("TRACK_SIDEREAL", "Sidereal", true);
AddTrackMode("TRACK_CUSTOM", "Custom");
// Let's simulate it to be an F/7.5 120mm telescope
ScopeParametersN[0].value = 120;
ScopeParametersN[1].value = 900;
ScopeParametersN[2].value = 120;
ScopeParametersN[3].value = 900;
TrackState = SCOPE_IDLE;
SetParkDataType(PARK_RA_DEC);
initGuiderProperties(getDeviceName(), MOTION_TAB);
/* Add debug controls so we may debug driver if necessary */
addDebugControl();
setDriverInterface(getDriverInterface() | GUIDER_INTERFACE);
double longitude=0, latitude=90;
// Get value from config file if it exists.
IUGetConfigNumber(getDeviceName(), "GEOGRAPHIC_COORD", "LONG", &longitude);
currentRA = get_local_sidereal_time(longitude);
IUGetConfigNumber(getDeviceName(), "GEOGRAPHIC_COORD", "LAT", &latitude);
currentDEC = latitude > 0 ? 90 : -90;
return true;
}
bool Paramount::initProperties()
{
/* Make sure to init parent properties first */
INDI::Telescope::initProperties();
for (int i = 0; i < SlewRateSP.nsp-1; i++)
{
sprintf(SlewRateSP.sp[i].label, "%.fx", slewspeeds[i]);
SlewRateSP.sp[i].aux = (void *)&slewspeeds[i];
}
// Set 64x as default speed
SlewRateSP.sp[5].s = ISS_ON;
/* How fast do we guide compared to sidereal rate */
IUFillNumber(&JogRateN[RA_AXIS], "JOG_RATE_WE", "W/E Rate (arcmin)", "%g", 0, 600, 60, 30);
IUFillNumber(&JogRateN[DEC_AXIS], "JOG_RATE_NS", "N/S Rate (arcmin)", "%g", 0, 600, 60, 30);
IUFillNumberVector(&JogRateNP, JogRateN, 2, getDeviceName(), "JOG_RATE", "Jog Rate", MOTION_TAB, IP_RW, 0,
IPS_IDLE);
/* How fast do we guide compared to sidereal rate */
IUFillNumber(&GuideRateN[RA_AXIS], "GUIDE_RATE_WE", "W/E Rate", "%1.1f", 0.0, 1.0, 0.1, 0.5);
IUFillNumber(&GuideRateN[DEC_AXIS], "GUIDE_RATE_NS", "N/S Rate", "%1.1f", 0.0, 1.0, 0.1, 0.5);
IUFillNumberVector(&GuideRateNP, GuideRateN, 2, getDeviceName(), "GUIDE_RATE", "Guiding Rate", MOTION_TAB, IP_RW, 0,
IPS_IDLE);
// Tracking Mode
#if 0
IUFillSwitch(&TrackModeS[TRACK_SIDEREAL], "TRACK_SIDEREAL", "Sidereal", ISS_OFF);
IUFillSwitch(&TrackModeS[TRACK_SOLAR], "TRACK_SOLAR", "Solar", ISS_OFF);
IUFillSwitch(&TrackModeS[TRACK_LUNAR], "TRACK_LUNAR", "Lunar", ISS_OFF);
IUFillSwitch(&TrackModeS[TRACK_CUSTOM], "TRACK_CUSTOM", "Custom", ISS_OFF);
IUFillSwitchVector(&TrackModeSP, TrackModeS, 4, getDeviceName(), "TELESCOPE_TRACK_MODE", "Track Mode",
MAIN_CONTROL_TAB, IP_RW, ISR_ATMOST1, 0, IPS_IDLE);
#endif
AddTrackMode("TRACK_SIDEREAL", "Sidereal", true);
AddTrackMode("TRACK_SOLAR", "Solar");
AddTrackMode("TRACK_LUNAR", "Lunar");
AddTrackMode("TRACK_CUSTOM", "Custom");
// Custom Tracking Rate
#if 0
IUFillNumber(&TrackRateN[0], "TRACK_RATE_RA", "RA (arcsecs/s)", "%.6f", -16384.0, 16384.0, 0.000001, 15.041067);
IUFillNumber(&TrackRateN[1], "TRACK_RATE_DE", "DE (arcsecs/s)", "%.6f", -16384.0, 16384.0, 0.000001, 0);
IUFillNumberVector(&TrackRateNP, TrackRateN, 2, getDeviceName(), "TELESCOPE_TRACK_RATE", "Track Rates",
MAIN_CONTROL_TAB, IP_RW, 60, IPS_IDLE);
#endif
// Let's simulate it to be an F/7.5 120mm telescope with 50m 175mm guide scope
ScopeParametersN[0].value = 120;
ScopeParametersN[1].value = 900;
ScopeParametersN[2].value = 50;
ScopeParametersN[3].value = 175;
TrackState = SCOPE_IDLE;
SetParkDataType(PARK_RA_DEC);
initGuiderProperties(getDeviceName(), MOTION_TAB);
setDriverInterface(getDriverInterface() | GUIDER_INTERFACE);
addAuxControls();
double longitude=0, latitude=90;
// Get value from config file if it exists.
IUGetConfigNumber(getDeviceName(), "GEOGRAPHIC_COORD", "LONG", &longitude);
currentRA = get_local_sidereal_time(longitude);
IUGetConfigNumber(getDeviceName(), "GEOGRAPHIC_COORD", "LAT", &latitude);
currentDEC = latitude > 0 ? 90 : -90;
return true;
}
bool IEQPro::initProperties()
{
INDI::Telescope::initProperties();
/* Firmware */
IUFillText(&FirmwareT[FW_MODEL], "Model", "", 0);
IUFillText(&FirmwareT[FW_BOARD], "Board", "", 0);
IUFillText(&FirmwareT[FW_CONTROLLER], "Controller", "", 0);
IUFillText(&FirmwareT[FW_RA], "RA", "", 0);
IUFillText(&FirmwareT[FW_DEC], "DEC", "", 0);
IUFillTextVector(&FirmwareTP, FirmwareT, 5, getDeviceName(), "Firmware Info", "", MOUNTINFO_TAB, IP_RO, 0, IPS_IDLE);
/* Tracking Mode */
IUFillSwitch(&TrackModeS[TRACK_SIDEREAL], "TRACK_SIDEREAL", "Sidereal", ISS_ON);
IUFillSwitch(&TrackModeS[TRACK_SOLAR], "TRACK_SOLAR", "Solar", ISS_OFF);
IUFillSwitch(&TrackModeS[TRACK_LUNAR], "TRACK_LUNAR", "Lunar", ISS_OFF);
IUFillSwitch(&TrackModeS[TRACK_CUSTOM], "TRACK_CUSTOM", "Custom", ISS_OFF);
IUFillSwitchVector(&TrackModeSP, TrackModeS, 4, getDeviceName(), "TELESCOPE_TRACK_MODE", "Track Mode", MAIN_CONTROL_TAB, IP_RW, ISR_1OFMANY, 0, IPS_IDLE);
/* Custom Tracking Rate */
IUFillNumber(&CustomTrackRateN[0],"TRACK_RATE_CUSTOM","Rate","%g",-0.0100, 0.0100, 0.005, 0);
IUFillNumberVector(&CustomTrackRateNP, CustomTrackRateN,1,getDeviceName(),"TELESCOPE_TRACK_RATE","Track Rates",MOTION_TAB,IP_RW,60,IPS_IDLE);
/* GPS Status */
IUFillSwitch(&GPSStatusS[GPS_OFF], "Off", "", ISS_ON);
IUFillSwitch(&GPSStatusS[GPS_ON], "On", "", ISS_OFF);
IUFillSwitch(&GPSStatusS[GPS_DATA_OK], "Data OK", "", ISS_OFF);
IUFillSwitchVector(&GPSStatusSP, GPSStatusS, 3, getDeviceName(), "GPS_STATUS", "GPS", MOUNTINFO_TAB, IP_RO, ISR_1OFMANY, 0, IPS_IDLE);
/* Time Source */
IUFillSwitch(&TimeSourceS[TS_RS232], "RS232", "", ISS_ON);
IUFillSwitch(&TimeSourceS[TS_CONTROLLER], "Controller", "", ISS_OFF);
IUFillSwitch(&TimeSourceS[TS_GPS], "GPS", "", ISS_OFF);
IUFillSwitchVector(&TimeSourceSP, TimeSourceS, 3, getDeviceName(), "TIME_SOURCE", "Time Source", MOUNTINFO_TAB, IP_RO, ISR_1OFMANY, 0, IPS_IDLE);
/* Hemisphere */
IUFillSwitch(&HemisphereS[HEMI_SOUTH], "South", "", ISS_OFF);
IUFillSwitch(&HemisphereS[HEMI_NORTH], "North", "", ISS_ON);
IUFillSwitchVector(&HemisphereSP, HemisphereS, 2, getDeviceName(), "HEMISPHERE", "Hemisphere", MOUNTINFO_TAB, IP_RO, ISR_1OFMANY, 0, IPS_IDLE);
/* Home */
IUFillSwitch(&HomeS[IEQ_FIND_HOME], "FindHome", "Find Home", ISS_OFF);
IUFillSwitch(&HomeS[IEQ_SET_HOME], "SetCurrentAsHome", "Set current as Home", ISS_OFF);
IUFillSwitch(&HomeS[IEQ_GOTO_HOME], "GoToHome", "Go to Home", ISS_OFF);
IUFillSwitchVector(&HomeSP, HomeS, 3, getDeviceName(), "HOME", "Home", MAIN_CONTROL_TAB, IP_RW, ISR_ATMOST1, 0, IPS_IDLE);
/* How fast do we guide compared to sidereal rate */
IUFillNumber(&GuideRateN[0], "GUIDE_RATE", "x Sidereal", "%g", 0.1, 0.9, 0.1, 0.5);
IUFillNumberVector(&GuideRateNP, GuideRateN, 1, getDeviceName(), "GUIDE_RATE", "Guiding Rate", MOTION_TAB, IP_RW, 0, IPS_IDLE);
TrackState=SCOPE_IDLE;
initGuiderProperties(getDeviceName(), MOTION_TAB);
setDriverInterface(getDriverInterface() | GUIDER_INTERFACE);
SetParkDataType(PARK_RA_DEC);
addAuxControls();
return true;
}
