/*!
Default constructor. Note that the name of the device used by a QextSerialPort constructed with
this constructor will be determined by #defined constants, or lack thereof - the default behavior
is the same as _TTY_LINUX_. Possible naming conventions and their associated constants are:
\verbatim
Constant Used By Naming Convention
---------- ------------- ------------------------
Q_OS_WIN Windows COM1, COM2
_TTY_IRIX_ SGI/IRIX /dev/ttyf1, /dev/ttyf2
_TTY_HPUX_ HP-UX /dev/tty1p0, /dev/tty2p0
_TTY_SUN_ SunOS/Solaris /dev/ttya, /dev/ttyb
_TTY_DIGITAL_ Digital UNIX /dev/tty01, /dev/tty02
_TTY_FREEBSD_ FreeBSD /dev/ttyd0, /dev/ttyd1
_TTY_OPENBSD_ OpenBSD /dev/tty00, /dev/tty01
_TTY_LINUX_ Linux /dev/ttyS0, /dev/ttyS1
<none> Linux /dev/ttyS0, /dev/ttyS1
\endverbatim
This constructor assigns the device name to the name of the first port on the specified system.
See the other constructors if you need to open a different port.
*/
QextSerialPort::QextSerialPort(QextSerialPort::QueryMode mode)
: QIODevice()
{
#ifdef Q_OS_WIN
setPortName("COM1");
#elif defined(_TTY_IRIX_)
setPortName("/dev/ttyf1");
#elif defined(_TTY_HPUX_)
setPortName("/dev/tty1p0");
#elif defined(_TTY_SUN_)
setPortName("/dev/ttya");
#elif defined(_TTY_DIGITAL_)
setPortName("/dev/tty01");
#elif defined(_TTY_FREEBSD_)
setPortName("/dev/ttyd1");
#elif defined(_TTY_OPENBSD_)
setPortName("/dev/tty00");
#else
setPortName("/dev/ttyS0");
#endif
construct();
setQueryMode(mode);
platformSpecificInit();
}
/*!
Constructs a port with default name and specified \a settings.
*/
QextSerialPort::QextSerialPort(const PortSettings& settings, QextSerialPort::QueryMode mode, QObject *parent)
: QIODevice(parent), d_ptr(new QextSerialPortPrivate(this))
{
Q_D(QextSerialPort);
setQueryMode(mode);
d->setPortSettings(settings);
}
QextSerialPort::QextSerialPort(QextSerialPort::QueryMode mode, QObject *parent)
: QIODevice(parent), d_ptr(new QextSerialPortPrivate(this))
{
#ifdef Q_OS_WIN
setPortName(QLatin1String("COM1"));
#elif defined(Q_OS_IRIX)
setPortName(QLatin1String("/dev/ttyf1"));
#elif defined(Q_OS_HPUX)
setPortName(QLatin1String("/dev/tty1p0"));
#elif defined(Q_OS_SOLARIS)
setPortName(QLatin1String("/dev/ttya"));
#elif defined(Q_OS_OSF) //formally DIGITAL UNIX
setPortName(QLatin1String("/dev/tty01"));
#elif defined(Q_OS_FREEBSD)
setPortName(QLatin1String("/dev/ttyd1"));
#elif defined(Q_OS_OPENBSD)
setPortName(QLatin1String("/dev/tty00"));
#else
setPortName(QLatin1String("/dev/ttyS0"));
#endif
setQueryMode(mode);
}
/*!
\fn Win_QextSerialPort::Win_QextSerialPort(const QString & name)
Constructs a serial port attached to the port specified by devName.
devName is the name of the device, which is windowsystem-specific,
e.g."COM2" or "/dev/ttyS0".
*/
Win_QextSerialPort::Win_QextSerialPort(const QString & name, QextSerialBase::QueryMode mode):
QextSerialBase(name)
{
Win_Handle=INVALID_HANDLE_VALUE;
setQueryMode(mode);
init();
}
/*!
\fn Posix_QextSerialPort::Posix_QextSerialPort(const QString & name)
Constructs a serial port attached to the port specified by name.
name is the name of the device, which is windowsystem-specific,
e.g."COM1" or "/dev/ttyS0".
*/
Posix_QextSerialPort::Posix_QextSerialPort(const QString & name, QextSerialBase::QueryMode mode)
: QextSerialBase(name)
{
Posix_File=new QFile();
setQueryMode(mode);
init();
}
/*!
\fn Win_QextSerialPort::Win_QextSerialPort()
Default constructor. Note that the name of the device used by a Win_QextSerialPort constructed
with this constructor will be determined by #defined constants, or lack thereof - the default
behavior is the same as _TTY_LINUX_. Possible naming conventions and their associated constants
are:
\verbatim
Constant Used By Naming Convention
---------- ------------- ------------------------
_TTY_WIN_ Windows COM1, COM2
_TTY_IRIX_ SGI/IRIX /dev/ttyf1, /dev/ttyf2
_TTY_HPUX_ HP-UX /dev/tty1p0, /dev/tty2p0
_TTY_SUN_ SunOS/Solaris /dev/ttya, /dev/ttyb
_TTY_DIGITAL_ Digital UNIX /dev/tty01, /dev/tty02
_TTY_FREEBSD_ FreeBSD /dev/ttyd0, /dev/ttyd1
_TTY_LINUX_ Linux /dev/ttyS0, /dev/ttyS1
<none> Linux /dev/ttyS0, /dev/ttyS1
\endverbatim
This constructor associates the object with the first port on the system, e.g. COM1 for Windows
platforms. See the other constructor if you need a port other than the first.
*/
Win_QextSerialPort::Win_QextSerialPort(QextSerialBase::QueryMode mode):
QextSerialBase()
{
Win_Handle=INVALID_HANDLE_VALUE;
setQueryMode(mode);
init();
}
/*!
Constructs a serial port attached to the port specified by name.
name is the name of the device, which is windowsystem-specific,
e.g."COM1" or "/dev/ttyS0".
*/
QextSerialPort::QextSerialPort(const QString & name, QextSerialPort::QueryMode mode)
: QIODevice()
{
construct();
setQueryMode(mode);
setPortName(name);
platformSpecificInit();
}
/*!
\fn Win_QextSerialPort::Win_QextSerialPort(const PortSettings& settings)
Constructs a port with default name and specified settings.
*/
Win_QextSerialPort::Win_QextSerialPort(const PortSettings& settings, QextSerialBase::QueryMode mode) {
Win_Handle=INVALID_HANDLE_VALUE;
setBaudRate(settings.BaudRate);
setDataBits(settings.DataBits);
setStopBits(settings.StopBits);
setParity(settings.Parity);
setFlowControl(settings.FlowControl);
setTimeout(settings.Timeout_Millisec);
setQueryMode(mode);
init();
}
/*!
Constructs a port with default name and specified settings.
*/
QextSerialPort::QextSerialPort(const PortSettings& settings, QextSerialPort::QueryMode mode)
: QIODevice()
{
construct();
setBaudRate(settings.BaudRate);
setDataBits(settings.DataBits);
setParity(settings.Parity);
setStopBits(settings.StopBits);
setFlowControl(settings.FlowControl);
setTimeout(settings.Timeout_Millisec);
setQueryMode(mode);
platformSpecificInit();
}
/*!
\fn Posix_QextSerialPort::Posix_QextSerialPort(const PortSettings& settings)
Constructs a port with default name and specified settings.
*/
Posix_QextSerialPort::Posix_QextSerialPort(const PortSettings& settings, QextSerialBase::QueryMode mode)
: QextSerialBase()
{
setBaudRate(settings.BaudRate);
setDataBits(settings.DataBits);
setParity(settings.Parity);
setStopBits(settings.StopBits);
setFlowControl(settings.FlowControl);
setTimeout(settings.Timeout_Millisec);
setQueryMode(mode);
init();
}
int QextSerialPort::qt_metacall(QMetaObject::Call _c, int _id, void **_a)
{
_id = QIODevice::qt_metacall(_c, _id, _a);
if (_id < 0)
return _id;
if (_c == QMetaObject::InvokeMetaMethod) {
if (_id < 15)
qt_static_metacall(this, _c, _id, _a);
_id -= 15;
} else if (_c == QMetaObject::RegisterMethodArgumentMetaType) {
if (_id < 15)
*reinterpret_cast<int*>(_a[0]) = -1;
_id -= 15;
}
#ifndef QT_NO_PROPERTIES
else if (_c == QMetaObject::ReadProperty) {
void *_v = _a[0];
switch (_id) {
case 0: *reinterpret_cast< QString*>(_v) = portName(); break;
case 1: *reinterpret_cast< QueryMode*>(_v) = queryMode(); break;
}
_id -= 2;
} else if (_c == QMetaObject::WriteProperty) {
void *_v = _a[0];
switch (_id) {
case 0: setPortName(*reinterpret_cast< QString*>(_v)); break;
case 1: setQueryMode(*reinterpret_cast< QueryMode*>(_v)); break;
}
_id -= 2;
} else if (_c == QMetaObject::ResetProperty) {
_id -= 2;
} else if (_c == QMetaObject::QueryPropertyDesignable) {
_id -= 2;
} else if (_c == QMetaObject::QueryPropertyScriptable) {
_id -= 2;
} else if (_c == QMetaObject::QueryPropertyStored) {
_id -= 2;
} else if (_c == QMetaObject::QueryPropertyEditable) {
_id -= 2;
} else if (_c == QMetaObject::QueryPropertyUser) {
_id -= 2;
} else if (_c == QMetaObject::RegisterPropertyMetaType) {
if (_id < 2)
*reinterpret_cast<int*>(_a[0]) = -1;
_id -= 2;
}
#endif // QT_NO_PROPERTIES
return _id;
}
/*!
Constructs a serial port attached to the port specified by name.
\a name is the name of the device, which is windowsystem-specific,
e.g."COM1" or "/dev/ttyS0". \a mode
*/
QextSerialPort::QextSerialPort(const QString & name, QextSerialPort::QueryMode mode, QObject *parent)
: QIODevice(parent), d_ptr(new QextSerialPortPrivate(this))
{
setQueryMode(mode);
setPortName(name);
}
/*!
\fn Posix_QextSerialPort::Posix_QextSerialPort()
Default constructor. Note that the name of the device used by a QextSerialPort constructed with
this constructor will be determined by #defined constants, or lack thereof - the default behavior
is the same as _TTY_LINUX_. Possible naming conventions and their associated constants are:
\verbatim
Constant Used By Naming Convention
---------- ------------- ------------------------
_TTY_WIN_ Windows COM1, COM2
_TTY_IRIX_ SGI/IRIX /dev/ttyf1, /dev/ttyf2
_TTY_HPUX_ HP-UX /dev/tty1p0, /dev/tty2p0
_TTY_SUN_ SunOS/Solaris /dev/ttya, /dev/ttyb
_TTY_DIGITAL_ Digital UNIX /dev/tty01, /dev/tty02
_TTY_FREEBSD_ FreeBSD /dev/ttyd0, /dev/ttyd1
_TTY_OPENBSD_ OpenBSD /dev/tty00, /dev/tty01
_TTY_LINUX_ Linux /dev/ttyS0, /dev/ttyS1
<none> Linux /dev/ttyS0, /dev/ttyS1
\endverbatim
This constructor assigns the device name to the name of the first port on the specified system.
See the other constructors if you need to open a different port.
*/
Posix_QextSerialPort::Posix_QextSerialPort(QextSerialBase::QueryMode mode)
: QextSerialBase()
{
setQueryMode(mode);
init();
}