void specpack(g2float *fld,g2int ndpts,g2int JJ,g2int KK,g2int MM, g2int *idrstmpl,unsigned char *cpack,g2int *lcpack) //$$$ SUBPROGRAM DOCUMENTATION BLOCK // . . . . // SUBPROGRAM: specpack // PRGMMR: Gilbert ORG: W/NP11 DATE: 2002-12-19 // // ABSTRACT: This subroutine packs a spectral data field using the complex // packing algorithm for spherical harmonic data as // defined in the GRIB2 Data Representation Template 5.51. // // PROGRAM HISTORY LOG: // 2002-12-19 Gilbert // // USAGE: void specpack(g2float *fld,g2int ndpts,g2int JJ,g2int KK,g2int MM, // g2int *idrstmpl,insigned char *cpack,g2int *lcpack) // INPUT ARGUMENT LIST: // fld[] - Contains the packed data values // ndpts - The number of data values to pack // JJ - J - pentagonal resolution parameter // KK - K - pentagonal resolution parameter // MM - M - pentagonal resolution parameter // idrstmpl - Contains the array of values for Data Representation // Template 5.51 // // OUTPUT ARGUMENT LIST: // cpack - The packed data field (character*1 array) // lcpack - length of packed field cpack(). // // REMARKS: None // // ATTRIBUTES: // LANGUAGE: C // MACHINE: IBM SP // //$$$ { g2int *ifld,tmplsim[5]; g2float *unpk,*tfld; // g2float bscale, dscale; g2float *pscale,tscale; g2int Js,Ks,Ms,Ts,Ns,inc,incu,incp,n,Nm,m,ipos; /* bscale = int_power(2.0,-idrstmpl[1]); NOT used */ /* dscale = int_power(10.0,idrstmpl[2]); NOT used */ Js=idrstmpl[5]; Ks=idrstmpl[6]; Ms=idrstmpl[7]; Ts=idrstmpl[8]; // // Calculate Laplacian scaling factors for each possible wave number. // pscale=(g2float *)malloc((JJ+MM)*sizeof(g2float)); tscale=(g2float)idrstmpl[4]*1E-6; for (n=Js;n<=JJ+MM;n++) pscale[n]=pow((g2float)(n*(n+1)),tscale); // // Separate spectral coeffs into two lists; one to contain unpacked // values within the sub-spectrum Js, Ks, Ms, and the other with values // outside of the sub-spectrum to be packed. // tfld=(g2float *)malloc(ndpts*sizeof(g2float)); unpk=(g2float *)malloc(ndpts*sizeof(g2float)); ifld=(g2int *)malloc(ndpts*sizeof(g2int)); inc=0; incu=0; incp=0; for (m=0;m<=MM;m++) { Nm=JJ; // triangular or trapezoidal if ( KK == JJ+MM ) Nm=JJ+m; // rhombodial Ns=Js; // triangular or trapezoidal if ( Ks == Js+Ms ) Ns=Js+m; // rhombodial for (n=m;n<=Nm;n++) { if (n<=Ns && m<=Ms) { // save unpacked value unpk[incu++]=fld[inc++]; // real part unpk[incu++]=fld[inc++]; // imaginary part } else { // Save value to be packed and scale // Laplacian scale factor tfld[incp++]=fld[inc++]*pscale[n]; // real part tfld[incp++]=fld[inc++]*pscale[n]; // imaginary part } } } free(pscale); if (incu != Ts) { printf("specpack: Incorrect number of unpacked values %d given:\n",(int)Ts); printf("specpack: Resetting idrstmpl[8] to %d\n",(int)incu); Ts=incu; } // // Add unpacked values to the packed data array in 32-bit IEEE format // mkieee(unpk,(g2int *)cpack,Ts); ipos=4*Ts; // // Scale and pack the rest of the coefficients // tmplsim[1]=idrstmpl[1]; tmplsim[2]=idrstmpl[2]; tmplsim[3]=idrstmpl[3]; simpack(tfld,ndpts-Ts,tmplsim,cpack+ipos,lcpack); *lcpack=(*lcpack)+ipos; // // Fill in Template 5.51 // idrstmpl[0]=tmplsim[0]; idrstmpl[1]=tmplsim[1]; idrstmpl[2]=tmplsim[2]; idrstmpl[3]=tmplsim[3]; idrstmpl[8]=Ts; idrstmpl[9]=1; // Unpacked spectral data is 32-bit IEEE free(tfld); free(unpk); free(ifld); return; }
g2int g2_addfield(unsigned char *cgrib,g2int ipdsnum,g2int *ipdstmpl, g2float *coordlist,g2int numcoord,g2int idrsnum,g2int *idrstmpl, g2float *fld,g2int ngrdpts,g2int ibmap,g2int *bmap) //$$$ SUBPROGRAM DOCUMENTATION BLOCK // . . . . // SUBPROGRAM: g2_addfield // PRGMMR: Gilbert ORG: W/NP11 DATE: 2002-11-05 // // ABSTRACT: This routine packs up Sections 4 through 7 for a given field // and adds them to a GRIB2 message. They are Product Definition Section, // Data Representation Section, Bit-Map Section and Data Section, // respectively. // This routine is used with routines "g2_create", "g2_addlocal", // "g2_addgrid", and "g2_gribend" to create a complete GRIB2 message. // g2_create must be called first to initialize a new GRIB2 message. // Also, routine g2_addgrid must be called after g2_create and // before this routine to add the appropriate grid description to // the GRIB2 message. Also, a call to g2_gribend is required to complete // GRIB2 message after all fields have been added. // // PROGRAM HISTORY LOG: // 2002-11-05 Gilbert // 2002-12-23 Gilbert - Added complex spherical harmonic packing // 2003-08-27 Gilbert - Added support for new templates using // PNG and JPEG2000 algorithms/templates. // 2004-11-29 Gilbert - JPEG2000 now allowed to use WMO Template no. 5.40 // PNG now allowed to use WMO Template no. 5.41 // - Added check to determine if packing algorithm failed. // 2005-05-10 Gilbert - Imposed minimum size on cpack, used to hold encoded // bit string. // // USAGE: int g2_addfield(unsigned char *cgrib,g2int ipdsnum,g2int *ipdstmpl, // g2float *coordlist,g2int numcoord,g2int idrsnum,g2int *idrstmpl, // g2float *fld,g2int ngrdpts,g2int ibmap,g2int *bmap) // INPUT ARGUMENT LIST: // cgrib - Char array that contains the GRIB2 message to which sections // 4 through 7 should be added. // ipdsnum - Product Definition Template Number ( see Code Table 4.0) // ipdstmpl - Contains the data values for the specified Product Definition // Template ( N=ipdsnum ). Each element of this integer // array contains an entry (in the order specified) of Product // Defintion Template 4.N // coordlist- Array containg floating point values intended to document // the vertical discretisation associated to model data // on hybrid coordinate vertical levels. // numcoord - number of values in array coordlist. // idrsnum - Data Representation Template Number ( see Code Table 5.0 ) // idrstmpl - Contains the data values for the specified Data Representation // Template ( N=idrsnum ). Each element of this integer // array contains an entry (in the order specified) of Data // Representation Template 5.N // Note that some values in this template (eg. reference // values, number of bits, etc...) may be changed by the // data packing algorithms. // Use this to specify scaling factors and order of // spatial differencing, if desired. // fld[] - Array of data points to pack. // ngrdpts - Number of data points in grid. // i.e. size of fld and bmap. // ibmap - Bitmap indicator ( see Code Table 6.0 ) // 0 = bitmap applies and is included in Section 6. // 1-253 = Predefined bitmap applies // 254 = Previously defined bitmap applies to this field // 255 = Bit map does not apply to this product. // bmap[] - Integer array containing bitmap to be added. ( if ibmap=0 ) // // OUTPUT ARGUMENT LIST: // cgrib - Character array to contain the updated GRIB2 message. // Must be allocated large enough to store the entire // GRIB2 message. // // RETURN VALUES: // ierr - Return code. // > 0 = Current size of updated GRIB2 message // -1 = GRIB message was not initialized. Need to call // routine g2_create first. // -2 = GRIB message already complete. Cannot add new section. // -3 = Sum of Section byte counts doesn't add to total byte count // -4 = Previous Section was not 3 or 7. // -5 = Could not find requested Product Definition Template. // -6 = Section 3 (GDS) not previously defined in message // -7 = Tried to use unsupported Data Representationi Template // -8 = Specified use of a previously defined bitmap, but one // does not exist in the GRIB message. // -9 = GDT of one of 5.50 through 5.53 required to pack field // using DRT 5.51. // -10 = Error packing data field. // // REMARKS: Note that the Sections 4 through 7 can only follow // Section 3 or Section 7 in a GRIB2 message. // // ATTRIBUTES: // LANGUAGE: C // MACHINE: // //$$$ { g2int ierr; static unsigned char G=0x47; // 'G' static unsigned char R=0x52; // 'R' static unsigned char I=0x49; // 'I' static unsigned char B=0x42; // 'B' static unsigned char s7=0x37; // '7' unsigned char *cpack; static g2int zero=0,one=1,four=4,five=5,six=6,seven=7; const g2int minsize=50000; g2int iofst,ibeg,lencurr,len,nsize; g2int ilen,isecnum,i,nbits,temp,left; g2int ibmprev,j,lcpack,ioctet,newlen,ndpts; g2int lensec4,lensec5,lensec6,lensec7; g2int issec3,isprevbmap,lpos3=0,JJ,KK,MM; g2int *coordieee; g2int width,height,iscan,itemp; g2float *pfld; xxtemplate *mappds,*mapdrs; unsigned int allones=4294967295u; ierr=0; // // Check to see if beginning of GRIB message exists // if ( cgrib[0]!=G || cgrib[1]!=R || cgrib[2]!=I || cgrib[3]!=B ) { printf("g2_addfield: GRIB not found in given message.\n"); printf("g2_addfield: Call to routine g2_create required to initialize GRIB messge.\n"); ierr=-1; return(ierr); } // // Get current length of GRIB message // gbit(cgrib,&lencurr,96,32); // // Check to see if GRIB message is already complete // if ( cgrib[lencurr-4]==s7 && cgrib[lencurr-3]==s7 && cgrib[lencurr-2]==s7 && cgrib[lencurr-1]==s7 ) { printf("g2_addfield: GRIB message already complete. Cannot add new section.\n"); ierr=-2; return(ierr); } // // Loop through all current sections of the GRIB message to // find the last section number. // issec3=0; isprevbmap=0; len=16; // length of Section 0 for (;;) { // Get number and length of next section iofst=len*8; gbit(cgrib,&ilen,iofst,32); iofst=iofst+32; gbit(cgrib,&isecnum,iofst,8); iofst=iofst+8; // Check if previous Section 3 exists if (isecnum == 3) { issec3=1; lpos3=len; } // Check if a previous defined bitmap exists if (isecnum == 6) { gbit(cgrib,&ibmprev,iofst,8); iofst=iofst+8; if ((ibmprev >= 0) && (ibmprev <= 253)) isprevbmap=1; } len=len+ilen; // Exit loop if last section reached if ( len == lencurr ) break; // If byte count for each section doesn't match current // total length, then there is a problem. if ( len > lencurr ) { printf("g2_addfield: Section byte counts don''t add to total.\n"); printf("g2_addfield: Sum of section byte counts = %d\n",len); printf("g2_addfield: Total byte count in Section 0 = %d\n",lencurr); ierr=-3; return(ierr); } } // // Sections 4 through 7 can only be added after section 3 or 7. // if ( (isecnum != 3) && (isecnum != 7) ) { printf("g2_addfield: Sections 4-7 can only be added after Section 3 or 7.\n"); printf("g2_addfield: Section ',isecnum,' was the last found in given GRIB message.\n"); ierr=-4; return(ierr); // // Sections 4 through 7 can only be added if section 3 was previously defined. // } else if ( ! issec3) { printf("g2_addfield: Sections 4-7 can only be added if Section 3 was previously included.\n"); printf("g2_addfield: Section 3 was not found in given GRIB message.\n"); printf("g2_addfield: Call to routine addgrid required to specify Grid definition.\n"); ierr=-6; return(ierr); } // // Add Section 4 - Product Definition Section // ibeg=lencurr*8; // Calculate offset for beginning of section 4 iofst=ibeg+32; // leave space for length of section sbit(cgrib,&four,iofst,8); // Store section number ( 4 ) iofst=iofst+8; sbit(cgrib,&numcoord,iofst,16); // Store num of coordinate values iofst=iofst+16; sbit(cgrib,&ipdsnum,iofst,16); // Store Prod Def Template num. iofst=iofst+16; // // Get Product Definition Template // mappds=getpdstemplate(ipdsnum); if (mappds == 0) { // undefined template ierr=-5; return(ierr); } // // Extend the Product Definition Template, if necessary. // The number of values in a specific template may vary // depending on data specified in the "static" part of the // template. // if ( mappds->needext ) { free(mappds); mappds=extpdstemplate(ipdsnum,ipdstmpl); } // // Pack up each input value in array ipdstmpl into the // the appropriate number of octets, which are specified in // corresponding entries in array mappds. // for (i=0;i<mappds->maplen;i++) { nbits=abs(mappds->map[i])*8; if ( (mappds->map[i] >= 0) || (ipdstmpl[i] >= 0) ) sbit(cgrib,ipdstmpl+i,iofst,nbits); else { sbit(cgrib,&one,iofst,1); temp=abs(ipdstmpl[i]); sbit(cgrib,&temp,iofst+1,nbits-1); } iofst=iofst+nbits; } // Pack template extension, if appropriate j=mappds->maplen; if ( mappds->needext && (mappds->extlen > 0) ) { for (i=0;i<mappds->extlen;i++) { nbits=abs(mappds->ext[i])*8; if ( (mappds->ext[i] >= 0) || (ipdstmpl[j] >= 0) ) sbit(cgrib,ipdstmpl+j,iofst,nbits); else { sbit(cgrib,&one,iofst,1); temp=abs(ipdstmpl[j]); sbit(cgrib,&temp,iofst+1,nbits-1); } iofst=iofst+nbits; j++; } } free(mappds); // // Add Optional list of vertical coordinate values // after the Product Definition Template, if necessary. // if ( numcoord != 0 ) { coordieee=(g2int *)calloc(numcoord,sizeof(g2int)); mkieee(coordlist,coordieee,numcoord); sbits(cgrib,coordieee,iofst,32,0,numcoord); iofst=iofst+(32*numcoord); free(coordieee); } // // Calculate length of section 4 and store it in octets // 1-4 of section 4. // lensec4=(iofst-ibeg)/8; sbit(cgrib,&lensec4,ibeg,32); // // Pack Data using appropriate algorithm // // // Get Data Representation Template // mapdrs=getdrstemplate(idrsnum); if (mapdrs == 0) { ierr=-5; return(ierr); } // // contract data field, removing data at invalid grid points, // if bit-map is provided with field. // if ( ibmap == 0 || ibmap==254 ) { pfld=(g2float *)malloc(ngrdpts*sizeof(g2float)); ndpts=0; for (j=0;j<ngrdpts;j++) { if ( bmap[j]==1 ) pfld[ndpts++]=fld[j]; } } else { ndpts=ngrdpts; pfld=fld; } nsize=ndpts*4; if ( nsize < minsize ) nsize=minsize; cpack=malloc(nsize); if (idrsnum == 0) // Simple Packing simpack(pfld,ndpts,idrstmpl,cpack,&lcpack); else if (idrsnum==2 || idrsnum==3) // Complex Packing cmplxpack(pfld,ndpts,idrsnum,idrstmpl,cpack,&lcpack); else if (idrsnum == 50) { // Sperical Harmonic Simple Packing simpack(pfld+1,ndpts-1,idrstmpl,cpack,&lcpack); mkieee(pfld+0,idrstmpl+4,1); // ensure RE(0,0) value is IEEE format } else if (idrsnum == 51) { // Sperical Harmonic Complex Packing getpoly(cgrib+lpos3,&JJ,&KK,&MM); if ( JJ!=0 && KK!=0 && MM!=0 ) specpack(pfld,ndpts,JJ,KK,MM,idrstmpl,cpack,&lcpack); else { printf("g2_addfield: Cannot pack DRT 5.51.\n"); return (-9); } } else if (idrsnum == 40 || idrsnum == 40000) { /* JPEG2000 encoding */ if (ibmap == 255) { getdim(cgrib+lpos3,&width,&height,&iscan); if ( width==0 || height==0 ) { width=ndpts; height=1; } else if ( width==allones || height==allones ) { width=ndpts; height=1; } else if ( (iscan&32) == 32) { /* Scanning mode: bit 3 */ itemp=width; width=height; height=itemp; } } else { width=ndpts; height=1; } lcpack=nsize; jpcpack(pfld,width,height,idrstmpl,cpack,&lcpack); } #ifdef USE_PNG else if (idrsnum == 41 || idrsnum == 40010) { /* PNG encoding */ if (ibmap == 255) { getdim(cgrib+lpos3,&width,&height,&iscan); if ( width==0 || height==0 ) { width=ndpts; height=1; } else if ( width==allones || height==allones ) { width=ndpts; height=1; } else if ( (iscan&32) == 32) { /* Scanning mode: bit 3 */ itemp=width; width=height; height=itemp; } } else { width=ndpts; height=1; } pngpack(pfld,width,height,idrstmpl,cpack,&lcpack); } #endif /* USE_PNG */ else { printf("g2_addfield: Data Representation Template 5.%d not yet implemented.\n",idrsnum); ierr=-7; return(ierr); } if ( ibmap == 0 || ibmap==254 ) { // free temp space if (fld != pfld) free(pfld); } if ( lcpack < 0 ) { if( cpack != 0 ) free(cpack); ierr=-10; return(ierr); } // // Add Section 5 - Data Representation Section // ibeg=iofst; // Calculate offset for beginning of section 5 iofst=ibeg+32; // leave space for length of section sbit(cgrib,&five,iofst,8); // Store section number ( 5 ) iofst=iofst+8; sbit(cgrib,&ndpts,iofst,32); // Store num of actual data points iofst=iofst+32; sbit(cgrib,&idrsnum,iofst,16); // Store Data Repr. Template num. iofst=iofst+16; // // Pack up each input value in array idrstmpl into the // the appropriate number of octets, which are specified in // corresponding entries in array mapdrs. // for (i=0;i<mapdrs->maplen;i++) { nbits=abs(mapdrs->map[i])*8; if ( (mapdrs->map[i] >= 0) || (idrstmpl[i] >= 0) ) sbit(cgrib,idrstmpl+i,iofst,nbits); else { sbit(cgrib,&one,iofst,1); temp=abs(idrstmpl[i]); sbit(cgrib,&temp,iofst+1,nbits-1); } iofst=iofst+nbits; } free(mapdrs); // // Calculate length of section 5 and store it in octets // 1-4 of section 5. // lensec5=(iofst-ibeg)/8; sbit(cgrib,&lensec5,ibeg,32); // // Add Section 6 - Bit-Map Section // ibeg=iofst; // Calculate offset for beginning of section 6 iofst=ibeg+32; // leave space for length of section sbit(cgrib,&six,iofst,8); // Store section number ( 6 ) iofst=iofst+8; sbit(cgrib,&ibmap,iofst,8); // Store Bit Map indicator iofst=iofst+8; // // Store bitmap, if supplied // if (ibmap == 0) { sbits(cgrib,bmap,iofst,1,0,ngrdpts); // Store BitMap iofst=iofst+ngrdpts; } // // If specifying a previously defined bit-map, make sure // one already exists in the current GRIB message. // if ((ibmap==254) && ( ! isprevbmap)) { printf("g2_addfield: Requested previously defined bitmap,"); printf(" but one does not exist in the current GRIB message.\n"); ierr=-8; return(ierr); } // // Calculate length of section 6 and store it in octets // 1-4 of section 6. Pad to end of octect, if necessary. // left=8-(iofst%8); if (left != 8) { sbit(cgrib,&zero,iofst,left); // Pad with zeros to fill Octet iofst=iofst+left; } lensec6=(iofst-ibeg)/8; sbit(cgrib,&lensec6,ibeg,32); // // Add Section 7 - Data Section // ibeg=iofst; // Calculate offset for beginning of section 7 iofst=ibeg+32; // leave space for length of section sbit(cgrib,&seven,iofst,8); // Store section number ( 7 ) iofst=iofst+8; // Store Packed Binary Data values, if non-constant field if (lcpack != 0) { ioctet=iofst/8; //cgrib(ioctet+1:ioctet+lcpack)=cpack(1:lcpack) for (j=0;j<lcpack;j++) cgrib[ioctet+j]=cpack[j]; iofst=iofst+(8*lcpack); } // // Calculate length of section 7 and store it in octets // 1-4 of section 7. // lensec7=(iofst-ibeg)/8; sbit(cgrib,&lensec7,ibeg,32); if( cpack != 0 ) free(cpack); // // Update current byte total of message in Section 0 // newlen=lencurr+lensec4+lensec5+lensec6+lensec7; sbit(cgrib,&newlen,96,32); return(newlen); }