/* Main entry */
void smf_jsadicer( int indf, const char *base, int trim, smf_inst_t instrument,
smf_jsaproj_t proj, size_t *ntile, Grp *grp, int *status ){
/* Local Variables: */
AstBox *box;
AstFitsChan *fc;
AstFrame *specfrm = NULL;
AstFrame *tile_frm = NULL;
AstFrameSet *iwcs;
AstFrameSet *tfs = NULL;
AstFrameSet *tile_wcs;
AstMapping *ndf_map = NULL;
AstMapping *p2pmap = NULL;
AstMapping *specmap = NULL;
AstMapping *tile_map = NULL;
AstRegion *region;
Grp *grpt = NULL;
char *path;
char dtype[ NDF__SZFTP + 1 ];
char jsatile_comment[45];
char type[ NDF__SZTYP + 1 ];
const char *dom = NULL;
const char *keyword;
const char *latsys = NULL;
const char *lonsys = NULL;
double *pd;
double dlbnd[3];
double dubnd[3];
double gcen[3];
double lbnd_in[3];
double lbnd_out[3];
double ubnd_in[3];
double ubnd_out[3];
float *pf;
int *created_tiles = NULL;
int *tiles;
int axlat;
int axlon;
int axspec;
int bbox[ 6 ];
int i;
int ifrm;
int igrid;
int indfo;
int indfs;
int indfx;
int inperm[3];
int ipixel;
int ishpx;
int isxph;
int itile;
int ix;
int iy;
int iz;
int junk;
int latax = -1;
int lbnd[3];
int lbnd_tile[ 3 ];
int lbndx[ NDF__MXDIM ];
int lonax = -1;
int nbase;
int ndim;
int ndimx;
int nfrm;
int nsig;
int ntiles;
int olbnd[ 3 ];
int oubnd[ 3 ];
int outperm[ 3 ];
int place;
int qual;
int tile_index;
int tile_lbnd[2];
int tile_ubnd[2];
int ubnd[3];
int ubnd_tile[ 3 ];
int ubndx[ NDF__MXDIM ];
int var;
size_t iext;
size_t size;
smfJSATiling tiling;
unsigned char *ipq = NULL;
void *ipd = NULL;
void *ipv = NULL;
/* Initialise */
*ntile = 0;
/* Check inherited status */
if( *status != SAI__OK ) return;
/* Begin an AST context. */
astBegin;
/* Begin an NDF context. */
ndfBegin();
/* Note the used length of the supplied base string. If it ends with
".sdf", reduce it by 4. */
nbase = astChrLen( base );
if( !strcmp( base + nbase - 4, ".sdf" ) ) nbase -= 4;
/* Allocate a buffer large enough to hold the full path for an output NDF. */
path = astMalloc( nbase + 25 );
/* Get the WCS from the NDF. */
kpg1Gtwcs( indf, &iwcs, status );
/* Note if the NDF projection is HPX or XPH. */
ishpx = astChrMatch( astGetC( iwcs, "Projection" ), "HEALPix" );
isxph = astChrMatch( astGetC( iwcs, "Projection" ), "polar HEALPix" );
/* Report an error if the NDFs projection is neither of these. */
if( !ishpx && !isxph && *status == SAI__OK ) {
ndfMsg( "N", indf );
*status = SAI__ERROR;
errRep( "", "The input NDF (^N) does not appear to be gridded "
"on the JSA all-sky pixel grid.", status );
}
/* Get the bounds of the NDF in pixel indices and the the corresponding
double precision GRID bounds (reduce the size of the grid by a small
amount to avoid problems with tiles that are on the edge of the valid sky
regions - astMapRegion can report an error for such tiles). Also store
the GRID coords of the centre. Also count the number of significant
pixel axes. */
ndfBound( indf, 3, lbnd, ubnd, &ndim, status );
nsig = 0;
for( i = 0; i < ndim; i++ ) {
dlbnd[ i ] = 0.5 + 0.1;
dubnd[ i ] = ubnd[ i ] - lbnd[ i ] + 1.5 - 0.1;
gcen[ i ] = 0.5*( dlbnd[ i ] + dubnd[ i ] );
if( ubnd[ i ] > lbnd[ i ] ) nsig++;
}
/* Find the one-based indices of the RA, Dec and spectral axes in the
current Frame of the NDF. */
axlon = 0;
if( astGetI( iwcs, "IsLonAxis(1)" ) ) {
axlon = 1;
lonsys = astGetC( iwcs, "System(1)" );
} else if( astGetI( iwcs, "IsLonAxis(2)" ) ) {
axlon = 2;
lonsys = astGetC( iwcs, "System(2)" );
} else if( ndim == 3 && astGetI( iwcs, "IsLonAxis(3)" ) ) {
axlon = 3;
lonsys = astGetC( iwcs, "System(3)" );
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
errRep( "", "smf_jsadicer: Cannot find the longitude axis in the "
"input NDF.", status );
}
axlat = 0;
if( astGetI( iwcs, "IsLatAxis(1)" ) ) {
axlat = 1;
latsys = astGetC( iwcs, "System(1)" );
} else if( astGetI( iwcs, "IsLatAxis(2)" ) ) {
axlat = 2;
latsys = astGetC( iwcs, "System(2)" );
} else if( ndim == 3 && astGetI( iwcs, "IsLatAxis(3)" ) ) {
axlat = 3;
latsys = astGetC( iwcs, "System(3)" );
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
errRep( "", "smf_jsadicer: Cannot find the latitude axis in the "
"input NDF.", status );
}
axspec = 6 - axlon - axlat;
/* Report an error if the spatial axes are not ICRS RA and Dec. */
if( ( lonsys && strcmp( lonsys, "ICRS" ) ) ||
( latsys && strcmp( latsys, "ICRS" ) ) ) {
if( *status == SAI__OK ) {
*status = SAI__ERROR;
ndfMsg( "N", indf );
errRep( "", "smf_jsadicer: The spatial axes in '^N' are not "
"ICRS RA and Dec.", status );
}
}
/* Create a Box describing the region covered by the NDF pixel grid in
GRID coords. */
box = astBox( astGetFrame( iwcs, AST__BASE ), 1, dlbnd, dubnd,
AST__NULL, " " );
/* Map this Box into the current WCS Frame of the NDF. */
region = astMapRegion( box, iwcs, iwcs );
/* If no instrument was specified, we will determine the instrument from
the contexts of the FITS extension. Copy the NDF FITS extension to a
FitsChan. Annul the error if the NDF no FITS extension. */
if( instrument == SMF__INST_NONE && *status == SAI__OK ) {
kpgGtfts( indf, &fc, status );
if( *status == KPG__NOFTS ) {
errAnnul( status );
fc = NULL;
}
} else {
fc = NULL;
}
/* Get the parameters of the required tiling scheme. */
smf_jsainstrument( NULL, fc, instrument, &tiling, status );
/* Get a list of the JSA tiles touched by the supplied NDF. */
tiles = smf_jsatiles_region( region, &tiling, &ntiles, status );
if( ntiles == 0 && *status == SAI__OK ) {
*status = SAI__ERROR;
errRep( "", "smf_jsadicer: No JSA tiles found touching supplied NDF "
"(programming error).", status );
}
/* Does the input NDF have a Variance component? */
ndfState( indf, "Variance", &var, status );
/* Does the input NDF have a Quality component? */
ndfState( indf, "Quality", &qual, status );
/* Decide on the data type to use: _REAL or _DOUBLE. */
ndfMtype( "_REAL,_DOUBLE", indf, indf, "Data", type, sizeof(type), dtype,
sizeof(dtype), status );
/* Tell the user what is happening. */
msgBlank( status );
msgOutf( "", "Dicing %s into JSA tiles:", status,
( nsig == 2 ) ? "map" : "cube" );
/* Loop round all tiles that overlap the supplied NDF. */
for( itile = 0; itile < ntiles && *status == SAI__OK; itile++ ) {
tile_index = tiles[ itile ];
/* Get the spatial pixel bounds of the current tile within the requested
JSA all-sky projection. Also get the (2D) WCS FrameSet for the tile. */
smf_jsatile( tile_index, &tiling, 0, proj, NULL, &tile_wcs, NULL,
tile_lbnd, tile_ubnd, status );
/* Extract the tile pixel->WCS mapping and WCS Frame. We know the indices
of the required Frames because they are hard-wired in smf_jsatile. */
tile_map = astGetMapping( tile_wcs, 3, 2 );
tile_frm = astGetFrame( tile_wcs, 2 );
/* Find the indices of the grid and pixel frames in the input NDF. */
ipixel = -1;
igrid = astGetI( iwcs, "Base" );
nfrm = astGetI( iwcs, "NFrame" );
for( ifrm = 0; ifrm < nfrm; ifrm++ ) {
dom = astGetC( astGetFrame( iwcs, ifrm + 1 ), "Domain" );
if( astChrMatch( dom, "PIXEL" ) ) ipixel = ifrm + 1;
}
/* If required, extract the pixel->spectral mapping and spectral frame in
the input NDF, and add it in parallel with the above tile mapping. */
if( ndim == 3 ) {
astSetI( iwcs, "Base", ipixel );
tfs = atlFrameSetSplit( iwcs, "DSBSPECTRUM SPECTRUM", NULL,
NULL, status );
astSetI( iwcs, "Base", igrid );
if( tfs ) {
specmap = astGetMapping( tfs, AST__BASE, AST__CURRENT );
specfrm = astGetFrame( tfs, AST__CURRENT );
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
ndfMsg( "N", indf );
errRep( "", "smf_jsadicer: Cannot find the spectral axis "
"in '^N'.", status );
}
tile_map = (AstMapping *) astCmpMap( tile_map, specmap, 0, " " );
tile_frm = (AstFrame *) astCmpFrame( tile_frm, specfrm, " " );
}
/* Ensure the Epoch is inherited form the input NDF. */
astSetD( tile_frm, "Epoch", astGetD( iwcs, "Epoch" ) );
/* Currently tile axis 1 is RA, axis 2 is Dec and axis 3 (if present) is
spectral. Append a PermMap that re-orders these tile WCS axes to match
those of the NDF. */
outperm[ axlon - 1 ] = 1;
outperm[ axlat - 1 ] = 2;
outperm[ axspec - 1 ] = 3;
inperm[ 0 ] = axlon;
inperm[ 1 ] = axlat;
inperm[ 2 ] = axspec;
tile_map = (AstMapping *) astCmpMap( tile_map, astPermMap( ndim, inperm,
ndim, outperm,
NULL, " " ),
1, " " );
tile_map = astSimplify( tile_map );
/* Also re-order the WCS axes in the tile frame. */
astPermAxes( tile_frm, outperm );
/* We want the zero-based indicies of the input pixel axes corresponding
to ra, dec and spectral. So find the indicies of the pixel axes in the
supplied NDF that are most closely aligned with each WCS axis. */
atlPairAxes( iwcs, NULL, gcen, NULL, inperm, status );
if( inperm[ 0 ] == axlon ) {
lonax = 0;
} else if( inperm[ 1 ] == axlon ) {
lonax = 1;
} else {
lonax = 2;
}
if( inperm[ 0 ] == axlat ) {
latax = 0;
} else if( inperm[ 1 ] == axlat ) {
latax = 1;
} else {
latax = 2;
}
/* To get the mapping from pixel coords in the input NDF to pixel coords
in the output NDF, we invert the above mapping so that it goes from WCS
to pixel, and append it to the end of the NDF pixel->WCS mapping. */
ndf_map = astGetMapping( iwcs, ipixel, AST__CURRENT );
astInvert( tile_map );
p2pmap = (AstMapping *) astCmpMap( ndf_map, tile_map, 1, " " );
p2pmap = astSimplify( p2pmap );
astInvert( tile_map );
/* Show the bounds of the tile within the input NDF. */
msgOutiff( MSG__DEBUG, "", " tile %d has bounds (%d:%d,%d:%d) "
"within the output NDF.", status, tile_index,
tile_lbnd[ 0 ], tile_ubnd[ 0 ], tile_lbnd[ 1 ],
tile_ubnd[ 1 ] );
/* Next job is to find the pixel bounds of the output NDF to create
which will hold data for the current tile. First map the pixel bounds
of the whole tile from output to input. */
lbnd_in[ 0 ] = tile_lbnd[ 0 ] - 0.5;
lbnd_in[ 1 ] = tile_lbnd[ 1 ] - 0.5;
lbnd_in[ 2 ] = lbnd[ 2 ] - 0.5;
ubnd_in[ 0 ] = tile_ubnd[ 0 ] - 0.5;
ubnd_in[ 1 ] = tile_ubnd[ 1 ] - 0.5;
ubnd_in[ 2 ] = ubnd[ 2 ] - 0.5;
astMapBox( p2pmap, lbnd_in, ubnd_in, 0, 1, lbnd_out + 0,
ubnd_out + 0, NULL, NULL );
astMapBox( p2pmap, lbnd_in, ubnd_in, 0, 2, lbnd_out + 1,
ubnd_out + 1, NULL, NULL );
if( ndim == 3 ) astMapBox( p2pmap, lbnd_in, ubnd_in, 0, 3,
lbnd_out + 2, ubnd_out + 2, NULL,
NULL );
lbnd_tile[ 0 ] = floor( lbnd_out[ 0 ] ) + 1;
lbnd_tile[ 1 ] = floor( lbnd_out[ 1 ] ) + 1;
lbnd_tile[ 2 ] = floor( lbnd_out[ 2 ] ) + 1;
ubnd_tile[ 0 ] = floor( ubnd_out[ 0 ] ) + 1;
ubnd_tile[ 1 ] = floor( ubnd_out[ 1 ] ) + 1;
ubnd_tile[ 2 ] = floor( ubnd_out[ 2 ] ) + 1;
/* Show the bounds of the tile within the input NDF. */
msgOutiff( MSG__DEBUG, "", " tile %d has bounds (%d:%d,%d:%d) "
"within the input NDF.", status, tile_index,
lbnd_tile[ 0 ], ubnd_tile[ 0 ], lbnd_tile[ 1 ],
ubnd_tile[ 1 ] );
/* If required, trim the bounds to the extent of the input NDF. */
if( trim ) {
if( lbnd_tile[ 0 ] < lbnd[ 0 ] ) lbnd_tile[ 0 ] = lbnd[ 0 ];
if( lbnd_tile[ 1 ] < lbnd[ 1 ] ) lbnd_tile[ 1 ] = lbnd[ 1 ];
if( lbnd_tile[ 2 ] < lbnd[ 2 ] ) lbnd_tile[ 2 ] = lbnd[ 2 ];
if( ubnd_tile[ 0 ] > ubnd[ 0 ] ) ubnd_tile[ 0 ] = ubnd[ 0 ];
if( ubnd_tile[ 1 ] > ubnd[ 1 ] ) ubnd_tile[ 1 ] = ubnd[ 1 ];
if( ubnd_tile[ 2 ] > ubnd[ 2 ] ) ubnd_tile[ 2 ] = ubnd[ 2 ];
}
/* Check there is some overlap. */
if( lbnd_tile[ 0 ] <= ubnd_tile[ 0 ] &&
lbnd_tile[ 1 ] <= ubnd_tile[ 1 ] &&
lbnd_tile[ 2 ] <= ubnd_tile[ 2 ] ){
/* Now need to check if this section of the input NDF contains any good
values. We also find the bounding box of the good values (within the
input pixel coordinate system). So first obtain and map the required
section of the input NDF. */
ndfSect( indf, ndim, lbnd_tile, ubnd_tile, &indfs, status );
ndfMap( indfs, "Data", type, "Read", &ipd, &junk, status );
if( var ) ndfMap( indfs, "Variance", type, "Read", &ipv, &junk, status );
if( qual ) ndfMap( indfs, "Quality", "_UBYTE", "Read", (void **) &ipq,
&junk, status );
/* Initialise the pixel bounds (within the input NDF) of the box holding
good data values for the current tile. */
bbox[ 0 ] = INT_MAX;
bbox[ 1 ] = INT_MAX;
bbox[ 2 ] = INT_MAX;
bbox[ 3 ] = -INT_MAX;
bbox[ 4 ] = -INT_MAX;
bbox[ 5 ] = -INT_MAX;
/* Loop round all pixels in the section. */
if( *status == SAI__OK ) {
if( !strcmp( type, "_REAL" ) ) {
pf = (float *) ipd;
for( iz = lbnd_tile[ 2 ]; iz <= ubnd_tile[ 2 ]; iz++ ) {
for( iy = lbnd_tile[ 1 ]; iy <= ubnd_tile[ 1 ]; iy++ ) {
for( ix = lbnd_tile[ 0 ]; ix <= ubnd_tile[ 0 ]; ix++ ) {
if( *(pf++) != VAL__BADR ) {
if( ix < bbox[ 0 ] ) bbox[ 0 ] = ix;
if( iy < bbox[ 1 ] ) bbox[ 1 ] = iy;
if( iz < bbox[ 2 ] ) bbox[ 2 ] = iz;
if( ix > bbox[ 3 ] ) bbox[ 3 ] = ix;
if( iy > bbox[ 4 ] ) bbox[ 4 ] = iy;
if( iz > bbox[ 5 ] ) bbox[ 5 ] = iz;
}
}
}
}
} else {
pd = (double *) ipd;
for( iz = lbnd_tile[ 2 ]; iz <= ubnd_tile[ 2 ]; iz++ ) {
for( iy = lbnd_tile[ 1 ]; iy <= ubnd_tile[ 1 ]; iy++ ) {
for( ix = lbnd_tile[ 0 ]; ix <= ubnd_tile[ 0 ]; ix++ ) {
if( *(pd++) != VAL__BADD ) {
if( ix < bbox[ 0 ] ) bbox[ 0 ] = ix;
if( iy < bbox[ 1 ] ) bbox[ 1 ] = iy;
if( iz < bbox[ 2 ] ) bbox[ 2 ] = iz;
if( ix > bbox[ 3 ] ) bbox[ 3 ] = ix;
if( iy > bbox[ 4 ] ) bbox[ 4 ] = iy;
if( iz > bbox[ 5 ] ) bbox[ 5 ] = iz;
}
}
}
}
}
/* Skip empty tiles. */
if( bbox[ 0 ] != INT_MAX ) {
msgOutf( "", " tile %d", status, tile_index );
/* If required, trim the bounds to the edges of the bounding box. */
if( trim >= 2 ) {
olbnd[ 0 ] = bbox[ 0 ];
olbnd[ 1 ] = bbox[ 1 ];
olbnd[ 2 ] = bbox[ 2 ];
oubnd[ 0 ] = bbox[ 3 ];
oubnd[ 1 ] = bbox[ 4 ];
oubnd[ 2 ] = bbox[ 5 ];
} else {
olbnd[ 0 ] = lbnd_tile[ 0 ];
olbnd[ 1 ] = lbnd_tile[ 1 ];
olbnd[ 2 ] = lbnd_tile[ 2 ];
oubnd[ 0 ] = ubnd_tile[ 0 ];
oubnd[ 1 ] = ubnd_tile[ 1 ];
oubnd[ 2 ] = ubnd_tile[ 2 ];
}
/* Modify these pixel bounds so that they refer to the output NDF. */
lbnd_in[ 0 ] = olbnd[ 0 ] - 0.5;
lbnd_in[ 1 ] = olbnd[ 1 ] - 0.5;
lbnd_in[ 2 ] = olbnd[ 2 ] - 0.5;
ubnd_in[ 0 ] = oubnd[ 0 ] - 0.5;
ubnd_in[ 1 ] = oubnd[ 1 ] - 0.5;
ubnd_in[ 2 ] = oubnd[ 2 ] - 0.5;
astMapBox( p2pmap, lbnd_in, ubnd_in, 1, 1, lbnd_out + 0,
ubnd_out + 0, NULL, NULL );
astMapBox( p2pmap, lbnd_in, ubnd_in, 1, 2, lbnd_out + 1,
ubnd_out + 1, NULL, NULL );
if( ndim == 3 ) astMapBox( p2pmap, lbnd_in, ubnd_in, 1, 3,
lbnd_out + 2, ubnd_out + 2, NULL,
NULL );
olbnd[ 0 ] = floor( lbnd_out[ 0 ] ) + 1;
olbnd[ 1 ] = floor( lbnd_out[ 1 ] ) + 1;
olbnd[ 2 ] = floor( lbnd_out[ 2 ] ) + 1;
oubnd[ 0 ] = floor( ubnd_out[ 0 ] ) + 1;
oubnd[ 1 ] = floor( ubnd_out[ 1 ] ) + 1;
oubnd[ 2 ] = floor( ubnd_out[ 2 ] ) + 1;
/* Get the full path to the output NDF for the current tile, and create an
NDF placeholder for it. */
sprintf( path, "%.*s_%d", nbase, base, tile_index );
ndfPlace( NULL, path, &place, status );
/* Create a new output NDF by copying the meta-data from the input NDF
section. */
ndfScopy( indfs, "Units", &place, &indfo, status );
/* Set the pixel bounds of the output NDF to the values found above and copy
the input data for the current tile into it. */
smf1_jsadicer( indfo, olbnd, oubnd, tile_map, tile_frm, p2pmap,
ipd, ipv, ipq, status );
/* Add the name of this output NDF to the group holding the names of the
output NDFs that have actually been created. */
if( grp ) grpPut1( grp, path, 0, status );
/* Add a TILENUM header to the output FITS extension. */
kpgGtfts( indfo, &fc, status );
if( *status == KPG__NOFTS ) {
errAnnul( status );
fc = astFitsChan( NULL, NULL, " " );
/* If the last card is "END", remove it. */
} else {
astSetI( fc, "Card", astGetI( fc, "NCARD" ) );
keyword = astGetC( fc, "CardName" );
if( keyword && !strcmp( keyword, "END" ) ) astDelFits( fc );
}
one_snprintf(jsatile_comment, 45, "JSA all-sky tile index (Nside=%i)",
status, tiling.ntpf);
atlPtfti( fc, "TILENUM", tile_index, jsatile_comment, status );
kpgPtfts( indfo, fc, status );
fc = astAnnul( fc );
/* Now store an STC-S polygon that describes the shortest boundary
enclosing the good data in the output NDF, and store it as an NDF extension. */
kpgPutOutline( indfo, 0.5, 1, status );
/* We now reshape any extension NDFs contained within the output NDF to
have the same spatial bounds as the main NDF (but only for extension
NDFs that originally have the same spatial bounds as the supplied NDF).
Get a group containing paths to all extension NDFs in the output NDF. */
ndgMoreg( indfo, &grpt, &size, status );
/* Loop round each output extension NDF. */
for( iext = 1; iext <= size && *status == SAI__OK; iext++ ) {
ndgNdfas( grpt, iext, "Update", &indfx, status );
/* Get its bounds. */
ndfBound( indfx, NDF__MXDIM, lbndx, ubndx, &ndimx, status );
/* See if this extension NDF has the same bounds on the spatial axes as
the supplied NDF. */
if( ndimx > 1 && lbndx[ lonax ] == lbnd[ lonax ] &&
lbndx[ latax ] == lbnd[ latax ] &&
ubndx[ lonax ] == ubnd[ lonax ] &&
ubndx[ latax ] == ubnd[ latax ] ) {
/* If so, change the bounds of the output extension NDF so that they are
the same as the main NDF on the spatial axes, and map the original
contents of the NDF onto the new pixel grid. */
smf1_jsadicer( indfx, olbnd, oubnd, tile_map, tile_frm, p2pmap,
NULL, NULL, NULL, status );
}
/* Annul the extension NDF identifier. */
ndfAnnul( &indfx, status );
}
/* Free resources associated with the current tile. */
grpDelet( &grpt, status );
ndfAnnul( &indfo, status );
/* Issue warnings about empty tiles. */
} else {
msgOutiff( MSG__VERB, "", " tile %d is empty and so will not be "
"created", status, tile_index );
}
}
/* Free the section of the input NDF. */
ndfAnnul( &indfs, status );
/* Append the index of this tile in the list of tiles to be created. */
created_tiles = astGrow( created_tiles, ++(*ntile),
sizeof( *created_tiles ) );
if( *status == SAI__OK ) created_tiles[ *ntile - 1 ] = tile_index;
} else {
msgOutiff( MSG__DEBUG, "", " Tile %d does not overlap the input "
"NDF after trimming.", status, tile_index );
}
}
msgBlank( status );
/* Write the indicies of the created tiles out to a parameter. */
if( *ntile ) parPut1i( "JSATILELIST", *ntile, created_tiles, status );
/* Free resources. */
created_tiles = astFree( created_tiles );
tiles = astFree( tiles );
path = astFree( path );
/* End the NDF context. */
ndfEnd( status );
/* End the AST context. */
astEnd;
}
/* Main entry */
void smurf_jsadicer( int *status ) {
/* Local Variables */
AstFitsChan *fc;
Grp *igrp = NULL;
Grp *ogrp = NULL;
char *pname;
char basename[ 255 ];
int indf;
int trim;
size_t ntile;
size_t size;
smfJSATiling tiling;
/* Check inherited status */
if (*status != SAI__OK) return;
/* Begin AST and NDF contexts. */
astBegin;
ndfBegin();
/* Get the name of the input NDF. */
kpg1Rgndf( "IN", 1, 1, "", &igrp, &size, status );
ndgNdfas( igrp, 1, "READ", &indf, status );
/* Get the base name for the output NDFs. */
if( *status == SAI__OK ) {
parGet0c( "OUT", basename, sizeof(basename), status );
if( *status == PAR__NULL ) {
errAnnul( status );
pname = basename;
grpGet( igrp, 1, 1, &pname, sizeof(basename), status );
}
}
/* See how the output NDFs are to be trimmed. */
parGet0i( "TRIM", &trim, status );
/* Get a FitsChan holding the contents of the FITS extension from the
input NDF. Annul the error if the NDF has no FITS extension. */
if( *status == SAI__OK ) {
kpgGtfts( indf, &fc, status );
if( *status == KPG__NOFTS ) {
errAnnul( status );
fc = NULL;
}
}
/* Select a JSA instrument and get the parameters defining the layout of
tiles for the selected instrument. */
smf_jsainstrument( "INSTRUMENT", fc, SMF__INST_NONE, &tiling,
status );
/* Create a new group to hold the names of the output NDFs that have been
created. This group does not include any NDFs that correspond to tiles
that contain no input data. */
ogrp = grpNew( "", status );
/* Dice the map into output NDFs. */
smf_jsadicer( indf, basename, trim, tiling.instrument, &ntile,
ogrp, status );
/* Write out the list of output NDF names, annulling the error if a null
parameter value is supplied. */
if( *status == SAI__OK && ogrp ) {
grpList( "OUTFILES", 0, 0, NULL, ogrp, status );
if( *status == PAR__NULL ) errAnnul( status );
}
/* Write the number of tiles being created to an output parameter. */
parPut0i( "NTILE", ntile, status );
/* Free resources. */
grpDelet( &igrp, status );
grpDelet( &ogrp, status );
/* End the NDF and AST context. */
ndfEnd( status );
astEnd;
/* If anything went wrong issue a context message. */
if( *status != SAI__OK ) msgOutif( MSG__VERB, " ", "JSADICER failed.",
status );
}
void smurf_jsatileinfo( int *status ) {
/* Local Variables */
AstCmpRegion *overlap;
AstFitsChan *fc;
AstFrameSet *fs;
AstObject *obj;
AstRegion *region;
AstRegion *target;
HDSLoc *cloc = NULL;
HDSLoc *xloc = NULL;
char *jcmt_tiles;
char *tilendf = NULL;
char text[ 200 ];
double dec[ 8 ];
double dist;
double dlbnd[ 2 ];
double dubnd[ 2 ];
double gx[ 8 ];
double gy[ 8 ];
double maxdist;
double norm_radec[2];
double point1[ 2 ];
double point2[ 2 ];
double ra[ 8 ];
double ra0;
double dec0;
int *ipntr;
int axes[ 2 ];
int create;
int dirlen;
int el;
int exists;
int flag;
int i;
int indf1;
int indf2;
int indf3;
int itile;
int iv;
int jtile;
int lbnd[ 2 ];
int local_origin;
int nc;
int place;
int tlbnd[ 2 ];
int tubnd[ 2 ];
int ubnd[ 2 ];
smf_jsaproj_t proj;
int xt;
int yt;
smfJSATiling skytiling;
void *pntr;
/* Check inherited status */
if( *status != SAI__OK ) return;
/* Start a new AST context. */
astBegin;
/* Get the instrument to use abnd get the parameters describing the
layout of its JSA tiles. */
smf_jsainstrument( "INSTRUMENT", NULL, SMF__INST_NONE, &skytiling,
status );
/* Return the maximum tile index. */
parPut0i( "MAXTILE", skytiling.ntiles - 1, status );
/* Abort if an error has occurred. */
if( *status != SAI__OK ) goto L999;
/* Decide what sort of projection to use. */
parChoic( "PROJ", "HPX", "HPX,HPX12,XPHN,XPHS", 1, text, sizeof(text),
status );
proj = smf_jsaproj_fromstr( text, 1, status );
/* If required, create an all-sky NDF in which each pixel covers the area
of a single tile, and holds the integer tile index. The NDF has an
initial size of 1x1 pixels, but is expanded later to the required size. */
lbnd[ 0 ] = ubnd[ 0 ] = lbnd[ 1 ] = ubnd[ 1 ] = 1;
ndfCreat( "ALLSKY", "_INTEGER", 2, lbnd, ubnd, &indf3, status );
/* If a null (!) value was supplied for parameter ALLSKY, annull the
error and pass on. */
if( *status == PAR__NULL ) {
errAnnul( status );
/* Otherwise, create a FrameSet describing the whole sky in which each
pixel corresponds to a single tile. */
} else {
smf_jsatile( -1, &skytiling, 0, proj, NULL, &fs, NULL, lbnd, ubnd,
status );
/* Change the bounds of the output NDF. */
ndfSbnd( 2, lbnd, ubnd, indf3, status );
/* Store the FrameSet in the NDF. */
ndfPtwcs( fs, indf3, status );
/* Map the data array. */
ndfMap( indf3, "Data", "_INTEGER", "WRITE/BAD", (void **) &ipntr, &el,
status );
/* Create all-sky map using XPH projection. */
if( *status == SAI__OK ) {
/* Loop round every tile index. */
for( jtile = 0; jtile < skytiling.ntiles; jtile++ ) {
/* Get the zero-based (x,y) indices of the tile within an HPX projection.
This flips the bottom left half-facet up to the top right. */
smf_jsatilei2xy( jtile, &skytiling, &xt, &yt, NULL, status );
/* Convert these HPX indices to the corresponding indices within the
required projection. Note, the lower left facet is split by the above
call to smf_jsatilei2xy tile (i.e. (xt,yt) indices are *not* in the
"raw" mode). For instance, (0,0) is not a valid tile. */
smf_jsatilexyconv( &skytiling, proj, xt, yt, 0, &xt, &yt, status );
/* Get the vector index of the corresponding element of the all-sky NDF. */
if( proj == SMF__JSA_HPX || proj == SMF__JSA_HPX12 ) {
iv = xt + 5*skytiling.ntpf*yt;
} else {
iv = xt + 4*skytiling.ntpf*yt;
}
/* Report an error if this element has already been assigned a tile
index. Otherwise, store the tile index. */
if( ipntr[ iv ] == VAL__BADI ) {
ipntr[ iv ] = jtile;
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
errRepf( "", "%s projection assigns multiple tiles to "
"pixel (%d,%d).", status, text, xt, yt );
break;
}
}
}
/* Store NDF title. */
sprintf( text, "JSA tile indices for %s data", skytiling.name );
ndfCput( text, indf3, "TITLE", status );
/* Store the instrument as a component in the SMURF extension. */
ndfXnew( indf3, "SMURF", "INSTRUMENT", 0, 0, &xloc, status );
ndfXpt0c( skytiling.name, indf3, "SMURF", "INSTRUMENT", status );
datAnnul( &xloc, status );
/* Close the NDF. */
ndfAnnul( &indf3, status );
}
/* Abort if an error has occurred. */
if( *status != SAI__OK ) goto L999;
/* Get the zero-based index of the required tile. If a null value is
supplied, annull the error and skip to the end. */
parGdr0i( "ITILE", 0, 0, skytiling.ntiles - 1, 0, &itile, status );
if( *status == PAR__NULL ) {
errAnnul( status );
goto L999;
}
/* See if the pixel origin is to be at the centre of the tile. */
parGet0l( "LOCAL", &local_origin, status );
/* Display the tile number. */
msgBlank( status );
msgSeti( "ITILE", itile );
msgSeti( "MAXTILE", skytiling.ntiles - 1);
msgOut( " ", " Tile ^ITILE (from 0 to ^MAXTILE):", status );
/* Get the FITS header, FrameSet and Region defining the tile, and the tile
bounds in pixel indices. */
smf_jsatile( itile, &skytiling, local_origin, proj, &fc, &fs, ®ion,
lbnd, ubnd, status );
/* Write the FITS headers out to a file, annulling the error if the
header is not required. */
if( *status == SAI__OK ) {
atlDumpFits( "HEADER", fc, status );
if( *status == PAR__NULL ) errAnnul( status );
}
/* If required, write the Region out to a text file. */
if( *status == SAI__OK ) {
atlCreat( "REGION", (AstObject *) region, status );
if( *status == PAR__NULL ) errAnnul( status );
}
/* Store the lower and upper pixel bounds of the tile. */
parPut1i( "LBND", 2, lbnd, status );
parPut1i( "UBND", 2, ubnd, status );
/* Display pixel bounds on the screen. */
msgSeti( "XL", lbnd[ 0 ] );
msgSeti( "XU", ubnd[ 0 ] );
msgSeti( "YL", lbnd[ 1 ] );
msgSeti( "YU", ubnd[ 1 ] );
msgOut( " ", " Pixel bounds: (^XL:^XU,^YL:^YU)", status );
/* Get the RA,Dec at the tile centre. */
if( astTest( fs, "SkyRef" ) ) {
ra0 = astGetD( fs, "SkyRef(1)" );
dec0 = astGetD( fs, "SkyRef(2)" );
/* Format the central RA and Dec. and display. Call astNorm on the
coordinates provided that the frame set has the correct number of
axes (which it should as it comes from smf_jsatile). */
norm_radec[0] = ra0;
norm_radec[1] = dec0;
if (astGetI(fs, "Naxes") == 2) astNorm(fs, norm_radec);
msgSetc( "RACEN", astFormat( fs, 1, norm_radec[ 0 ] ));
msgSetc( "DECCEN", astFormat( fs, 2, norm_radec[ 1 ] ));
msgOut( " ", " Centre (ICRS): RA=^RACEN DEC=^DECCEN", status );
/* Transform a collection of points on the edge of the region (corners and
side mid-points) from GRID coords to RA,Dec. */
point1[ 0 ] = 0.5;
point1[ 1 ] = 0.5;
point2[ 0 ] = ubnd[ 0 ] - lbnd[ 0 ] + 1;
point2[ 1 ] = ubnd[ 1 ] - lbnd[ 1 ] + 1;
gx[ 0 ] = point1[ 0 ]; /* Bottom left */
gy[ 0 ] = point1[ 1 ];
gx[ 1 ] = point1[ 0 ]; /* Centre left */
gy[ 1 ] = gy[ 0 ];
gx[ 2 ] = point1[ 0 ]; /* Top left */
gy[ 2 ] = point2[ 1 ];
gx[ 3 ] = gx[ 0 ]; /* Top centre */
gy[ 3 ] = point2[ 1 ];
gx[ 4 ] = point2[ 0 ]; /* Top right */
gy[ 4 ] = point2[ 1 ];
gx[ 5 ] = point2[ 0 ]; /* Centre right */
gy[ 5 ] = gy[ 0 ];
gx[ 6 ] = point2[ 0 ]; /* Bottom right */
gy[ 6 ] = point1[ 1 ];
gx[ 7 ] = gx[ 0 ]; /* Bottom centre */
gy[ 7 ] = point1[ 1 ];
astTran2( fs, 8, gx, gy, 1, ra, dec );
/* Find the arc-distance from the centre to the furthest point from the
centre. */
point1[ 0 ] = ra0;
point1[ 1 ] = dec0;
maxdist = -1.0;
for( i = 1; i < 8; i++ ) {
if( ra[ i ] != AST__BAD && dec[ i ] != AST__BAD ) {
point2[ 0 ] = ra[ i ];
point2[ 1 ] = dec[ i ];
dist = astDistance( fs, point1, point2 );
if( dist > maxdist ) maxdist = dist;
}
}
/* Convert from radius to diameter. */
maxdist *= 2.0;
/* Format this size as a dec value (i.e. arc-distance) and display it. */
if( maxdist > 0.0 ) {
msgSetc( "SIZE", astFormat( fs, 2, maxdist ) );
msgOut( " ", " Size: ^SIZE", status );
} else {
maxdist = AST__BAD;
msgOut( " ", " Size: <unknown>", status );
}
/* If a discontinuity passes through the tile, the centre and size may be
unknown. */
} else {
ra0 = AST__BAD;
dec0 = AST__BAD;
maxdist = AST__BAD;
msgOut( " ", " Centre (ICRS): RA=<unknown> DEC=<unknown>", status );
msgOut( " ", " Size: <unknown>", status );
}
/* Write the tile centre ra and dec in radians to the output parameters. */
parPut0d( "RACEN", norm_radec[ 0 ], status );
parPut0d( "DECCEN", norm_radec[ 1 ], status );
/* Write the size to the output parameter as radians. */
parPut0d( "SIZE", maxdist, status );
/* Get the translation of the environment variable JSA_TILE_DIR. */
jcmt_tiles = getenv( "JSA_TILE_DIR" );
/* Initialise the path to the tile's NDF to hold the root directory.
Use the current working directory if JSA_TILE_DIR is undefined. */
if( jcmt_tiles ) {
nc = 0;
tilendf = astAppendString( tilendf, &nc, jcmt_tiles );
} else {
nc = 512;
jcmt_tiles = astMalloc( nc );
while( !getcwd( jcmt_tiles, nc ) ) {
nc *= 2;
jcmt_tiles = astRealloc( jcmt_tiles, nc );
}
nc = 0;
tilendf = astAppendString( tilendf, &nc, jcmt_tiles );
jcmt_tiles = astFree( jcmt_tiles );
}
/* Complete the path to the tile's NDF. */
tilendf = astAppendString( tilendf, &nc, "/" );
tilendf = astAppendString( tilendf, &nc, skytiling.subdir );
dirlen = nc;
sprintf( text, "/tile_%d.sdf", itile );
tilendf = astAppendString( tilendf, &nc, text );
/* Write it to the output parameter. */
parPut0c( "TILENDF", tilendf, status );
/* See if the NDF exists, and store the flag in the output parameter. */
exists = access( tilendf, F_OK ) ? 0 : 1;
parPut0l( "EXISTS", exists, status );
/* If the NDF does not exist, create it if required. */
parGet0l( "CREATE", &create, status );
if( !exists && create && *status == SAI__OK ) {
/* Write the NDF info to the screen. */
msgSetc( "NDF", tilendf );
msgOutif( MSG__NORM, " ", " NDF: ^NDF (created)", status );
/* Temporarily terminate the NDF path at the end of the subdirectory. */
tilendf[ dirlen ] = 0;
/* Create the required directory (does nothing if the directory
already exists). It is given read/write/search permissions for owner
and group, and read/search permissions for others. */
(void) mkdir( tilendf, S_IRWXU | S_IRWXG | S_IROTH | S_IXOTH );
/* Replace the character temporarily overwritten above. */
tilendf[ dirlen ] = '/';
/* Now create the tile's NDF. */
ndfPlace( NULL, tilendf, &place, status );
ndfNew( skytiling.type, 2, lbnd, ubnd, &place, &indf1, status );
/* Fill its data array with zeros. */
ndfMap( indf1, "Data", skytiling.type, "WRITE/ZERO", &pntr, &el,
status );
/* Store the WCS FrameSet. */
ndfPtwcs( fs, indf1, status );
/* If the instrument jsatiles.have variance, fill the variance array with zeros. */
if( skytiling.var ) {
ndfMap( indf1, "Variance", skytiling.type, "WRITE/ZERO", &pntr,
&el, status );
}
/* Create a SMURF extension. */
ndfXnew( indf1, SMURF__EXTNAME, SMURF__EXTTYPE, 0, NULL, &xloc, status );
/* Store the tile number and instrument name in the extension. */
datNew0I( xloc, "TILE", status );
datFind( xloc, "TILE", &cloc, status );
datPut0I( cloc, itile, status );
datAnnul( &cloc, status );
datNew0C( xloc, "INSTRUMENT", strlen( skytiling.name ), status );
datFind( xloc, "INSTRUMENT", &cloc, status );
datPut0C( cloc, skytiling.name, status );
datAnnul( &cloc, status );
/* Create a weights NDF within the SMURF extension, and fill its data
array with zeros. */
ndfPlace( xloc, "WEIGHTS", &place, status );
ndfNew( skytiling.type, 2, lbnd, ubnd, &place, &indf2, status );
ndfMap( indf2, "Data", skytiling.type, "WRITE/ZERO", &pntr, &el,
status );
ndfPtwcs( fs, indf2, status );
ndfAnnul( &indf2, status );
/* Annul the extension locator and the main NDF identifier. */
datAnnul( &xloc, status );
ndfAnnul( &indf1, status );
/* Write the NDF info to the screen. */
} else {
msgSetc( "NDF", tilendf );
msgSetc( "E", exists ? "exists" : "does not exist" );
msgOut( " ", " NDF: ^NDF (^E)", status );
}
/* Initialise TBND and TLBND to indicate no overlap. */
tlbnd[ 0 ] = 1;
tlbnd[ 1 ] = 1;
tubnd[ 0 ] = 0;
tubnd[ 1 ] = 0;
/* Attempt to to get an AST Region (assumed to be in some 2D sky coordinate
system) using parameter "TARGET". */
if( *status == SAI__OK ) {
kpg1Gtobj( "TARGET", "Region",
(void (*)( void )) F77_EXTERNAL_NAME(ast_isaregion),
&obj, status );
/* Annul the error if none was obtained. */
if( *status == PAR__NULL ) {
errAnnul( status );
/* Otherwise, use the supplied object. */
} else {
target = (AstRegion *) obj;
/* If the target Region is 3-dimensional, remove the third axis, which
is assumed to be a spectral axis. */
if( astGetI( target, "Naxes" ) == 3 ) {
axes[ 0 ] = 1;
axes[ 1 ] = 2;
target = astPickAxes( target, 2, axes, NULL );
}
/* See if there is any overlap between the target and the tile. */
overlap = NULL;
flag = astOverlap( region, target );
if( flag == 0 ) {
msgOut( "", " Cannot convert between the coordinate system of the "
"supplied target and the tile.", status );
} else if( flag == 1 || flag == 6 ) {
msgOut( "", " There is no overlap between the target and the tile.",
status );
} else if( flag == 2 ) {
msgOut( "", " The tile is contained within the target.",
status );
tlbnd[ 0 ] = lbnd[ 0 ];
tlbnd[ 1 ] = lbnd[ 1 ];
tubnd[ 0 ] = ubnd[ 0 ];
tubnd[ 1 ] = ubnd[ 1 ];
} else if( flag == 3 ) {
overlap = astCmpRegion( region, target, AST__AND, " " );
} else if( flag == 4 ) {
overlap = astCmpRegion( region, target, AST__AND, " " );
} else if( flag == 5 ) {
msgOut( "", " The target and tile are identical.",
status );
tlbnd[ 0 ] = lbnd[ 0 ];
tlbnd[ 1 ] = lbnd[ 1 ];
tubnd[ 0 ] = ubnd[ 0 ];
tubnd[ 1 ] = ubnd[ 1 ];
} else if( *status == SAI__OK ) {
*status = SAI__OK;
errRepf( "", "Unexpected value %d returned by astOverlap "
"(programming error).", status, flag );
}
/* If a region containing the intersection of the tile and target was
created above, map it into the grid coordinate system of the tile. */
if( overlap ) {
overlap = astMapRegion( overlap, astGetMapping( fs, AST__CURRENT,
AST__BASE ),
astGetFrame( fs, AST__BASE ) );
/* Get its GRID bounds. */
astGetRegionBounds( overlap, dlbnd, dubnd );
/* Convert to integer. */
tlbnd[ 0 ] = ceil( dlbnd[ 0 ] - 0.5 );
tlbnd[ 1 ] = ceil( dlbnd[ 1 ] - 0.5 );
tubnd[ 0 ] = ceil( dubnd[ 0 ] - 0.5 );
tubnd[ 1 ] = ceil( dubnd[ 1 ] - 0.5 );
/* Convert to PIXEL indices within the tile. */
tlbnd[ 0 ] += lbnd[ 0 ] - 1;
tlbnd[ 1 ] += lbnd[ 1 ] - 1;
tubnd[ 0 ] += lbnd[ 0 ] - 1;
tubnd[ 1 ] += lbnd[ 1 ] - 1;
msgOutf( "", " The target overlaps section (%d:%d,%d:%d).",
status, tlbnd[ 0 ], tubnd[ 0 ], tlbnd[ 1 ], tubnd[ 1 ] );
}
}
}
/* Store the pixel index bounds of the tiles overlap with the target. */
parPut1i( "TLBND", 2, tlbnd, status );
parPut1i( "TUBND", 2, tubnd, status );
/* Arrive here if an error occurs. */
L999:;
/* Free resources. */
tilendf = astFree( tilendf );
/* End the AST context. */
astEnd;
/* Issue a status indication.*/
msgBlank( status );
if( *status == SAI__OK ) {
msgOutif( MSG__VERB, "", "JSATILEINFO succeeded.", status);
} else {
msgOutif( MSG__VERB, "", "JSATILEINFO failed.", status);
}
}
void smurf_jsatilelist( int *status ) {
/* Local Variables */
AstFitsChan *fc = NULL;
AstFrameSet *fs = NULL;
AstObject *obj;
AstRegion *region;
Grp *igrp = NULL;
Grp *sgrp = NULL;
double vertex_data[ 2*MAXVERT ];
int *tiles = NULL;
int i;
int indf;
int lbnd[2];
int ntile;
int nvert_dec;
int nvert_ra;
int ubnd[2];
size_t size;
size_t ssize;
smfJSATiling tiling;
/* Check inherited status */
if( *status != SAI__OK ) return;
/* Start a new AST context. */
astBegin;
/* Attempt to to get an AST Region. */
kpg1Gtobj( "IN", "Region",
(void (*)( void )) F77_EXTERNAL_NAME(ast_isaregion),
&obj, status );
region = (AstRegion *) obj;
/* If successful, attempt to access the IN parameter as an NDF. If this
works, we may be able to determine the instrument by looking at its
FITS extension. */
if( *status == SAI__OK && region ) {
ndfExist( "IN", "Read", &indf, status );
/* If we got an NDF, get a FitsChan holding the contents of its FITS
extension. Annul the error if the NDF has no FITS extension. */
if( indf != NDF__NOID ) {
kpgGtfts( indf, &fc, status );
if( *status == KPG__NOFTS ) {
errAnnul( status );
fc = NULL;
}
ndfAnnul( &indf, status );
}
/* Select a JSA instrument and get the parameters defining the layout of
tiles for the selected instrument. */
smf_jsainstrument( "INSTRUMENT", fc, SMF__INST_NONE, &tiling,
status );
/* Get the list of identifiers for tiles that overlap the region. */
tiles = smf_jsatiles_region( region, &tiling, &ntile, status );
/* If a null value was supplied for IN, attempt to get the positions of
vertices on the sky to define the region. */
} else if( *status == PAR__NULL ) {
errAnnul( status );
parGet1d( "VERTEX_RA", MAXVERT, vertex_data, &nvert_ra, status );
parGet1d( "VERTEX_DEC", MAXVERT, vertex_data + MAXVERT, &nvert_dec,
status );
if( nvert_ra != nvert_dec && *status == SAI__OK ) {
*status = SAI__ERROR;
errRepf( "", "Differing numbers of RA (%d) and Dec (%d) vertex values "
"supplied.", status, nvert_ra, nvert_dec );
}
/* Convert from degrees to radians. */
for( i = 0; i < nvert_ra; i++ ) {
vertex_data[ i ] *= AST__DD2R;
vertex_data[ MAXVERT + i ] *= AST__DD2R;
}
/* Select a JSA instrument and get the parameters defining the layout of
tiles for the selected instrument. */
smf_jsainstrument( "INSTRUMENT", NULL, SMF__INST_NONE, &tiling,
status );
/* Create a frame in which to define the region - we arbitrarily use tile 1. */
smf_jsatile( 1, &tiling, 0, NULL, &fs, NULL, lbnd, ubnd, status );
/* Create the region. */
region = (AstRegion *) astPolygon( fs, nvert_ra, MAXVERT, vertex_data, NULL, " " );
/* If the region is unbounded, it is probably because the vertices were
given in the wrong order. Invert the Polyfon to correct this. */
if( !astGetI( region, "bounded" ) ) astNegate( region );
/* Get the list of identifiers for tiles that overlap the region. */
tiles = smf_jsatiles_region( region, &tiling, &ntile, status );
}
/* If the IN parameter could not be accessed as a Region, annull any error
and get a group of input data files. */
if( !region || *status == SAI__ERROR ) {
if( *status != SAI__OK ) errAnnul( status );
kpg1Rgndf( "IN", 0, 1, "", &igrp, &size, status );
/* Get a group containing just the files holding science data. */
smf_find_science( NULL, igrp, &sgrp, 0, NULL, NULL, 1, 1, SMF__NULL, NULL,
NULL, NULL, NULL, status );
/* Check we have at least once science file. */
ssize = grpGrpsz( sgrp, status );
if( ssize == 0 ) {
msgOutif( MSG__NORM, " ", "None of the supplied input frames were SCIENCE.",
status );
/* Get the list of identifiers for tiles that receive any data. */
} else {
tiles = smf_jsatiles_data( sgrp, ssize, &tiling, &ntile, status );
}
/* Delete the groups. */
if( igrp ) grpDelet( &igrp, status);
if( sgrp ) grpDelet( &sgrp, status);
}
/* Sort the list of overlapping tiles into ascending order. */
if( *status == SAI__OK ) {
qsort( tiles, ntile, sizeof( *tiles ), jsatilelist_icomp );
/* Display the list of overlapping tiles. */
msgBlank( status );
msgOutf( "", " %s tiles touched by supplied data:", status,
tiling.name );
msgBlank( status );
for( i = 0; i < ntile; i++ ) {
msgSeti( "I", tiles[ i ] );
msgOut( "", " ^I", status );
}
msgBlank( status );
/* Write out the list of overlapping tiles to the output parameter. */
parPut1i( "TILES", ntile, tiles, status );
}
/* Free resources. */
tiles = astFree( tiles );
/* End the AST context. */
astEnd;
/* Issue a status indication.*/
msgBlank( status );
if( *status == SAI__OK ) {
msgOutif( MSG__VERB, "", "JSATILELIST succeeded.", status);
} else {
msgOutif( MSG__VERB, "", "JSATILELIST failed.", status);
}
}
