C++ (Cpp) smtc_init_secondary示例

示例#1

文件： msp_smtc.c 项目： CSCLOG/beaglebone

/*
 * Post-config but pre-boot cleanup entry point
 */
static void __cpuinit msp_smtc_init_secondary(void)
{
	int myvpe;

	/* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */
	myvpe = read_c0_tcbind() & TCBIND_CURVPE;
	if (myvpe > 0)
		change_c0_status(ST0_IM, STATUSF_IP0 | STATUSF_IP1 |
				STATUSF_IP6 | STATUSF_IP7);
	smtc_init_secondary();
}

示例#2

文件： msp_smtc.c 项目： Blackburn29/PsycoKernel

static void __cpuinit msp_smtc_init_secondary(void)
{
	int myvpe;

	
	myvpe = read_c0_tcbind() & TCBIND_CURVPE;
	if (myvpe > 0)
		change_c0_status(ST0_IM, STATUSF_IP0 | STATUSF_IP1 |
				STATUSF_IP6 | STATUSF_IP7);
	smtc_init_secondary();
}

示例#3

文件： malta-smtc.c 项目： 08opt/linux

/*
 * Post-config but pre-boot cleanup entry point
 */
static void __cpuinit msmtc_init_secondary(void)
{
	int myvpe;

	/* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */
	myvpe = read_c0_tcbind() & TCBIND_CURVPE;
	if (myvpe != 0) {
		/* Ideally, this should be done only once per VPE, but... */
		clear_c0_status(ST0_IM);
		set_c0_status((0x100 << cp0_compare_irq)
				| (0x100 << MIPS_CPU_IPI_IRQ));
		if (cp0_perfcount_irq >= 0)
			set_c0_status(0x100 << cp0_perfcount_irq);
	}

	smtc_init_secondary();
}

示例#4

文件： malta_smtc.c 项目： ndmsystems/linux-2.6.22-tc

void prom_init_secondary(void)
{
        void smtc_init_secondary(void);
	int myvpe;

	/* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */
	myvpe = read_c0_tcbind() & TCBIND_CURVPE;
	if (myvpe != 0) {
		/* Ideally, this should be done only once per VPE, but... */
		clear_c0_status(STATUSF_IP2);
		set_c0_status(STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP3
				| STATUSF_IP4 | STATUSF_IP5 | STATUSF_IP6
				| STATUSF_IP7);
	}

        smtc_init_secondary();
}

示例#5

文件： malta-smtc.c 项目： romanbb/android_kernel_lge_d851

static void __cpuinit msmtc_init_secondary(void)
{
	int myvpe;

	/*                                                            */
	myvpe = read_c0_tcbind() & TCBIND_CURVPE;
	if (myvpe != 0) {
		/*                                                        */
		clear_c0_status(ST0_IM);
		set_c0_status((0x100 << cp0_compare_irq)
				| (0x100 << MIPS_CPU_IPI_IRQ));
		if (cp0_perfcount_irq >= 0)
			set_c0_status(0x100 << cp0_perfcount_irq);
	}

	smtc_init_secondary();
}

示例#6

文件： sim_smtc.c 项目： 007kumarraja/rockchip-rk3188-mk908

/*
 * Post-config but pre-boot cleanup entry point
 */
static void __cpuinit ssmtc_init_secondary(void)
{
	smtc_init_secondary();
}