/*
** Given the name of a compile-time option, return true if that option
** was used and false if not.
**
** The name can optionally begin with "SQLITE_" but the "SQLITE_" prefix
** is not required for a match.
*/
int sqlite3_compileoption_used(const char *zOptName){
int i, n;
if( sqlite3StrNICmp(zOptName, "SQLITE_", 7)==0 ) zOptName += 7;
n = sqlite3Strlen30(zOptName);
/* Since ArraySize(azCompileOpt) is normally in single digits, a
** linear search is adequate. No need for a binary search. */
for(i=0; i<ArraySize(azCompileOpt); i++){
if( (sqlite3StrNICmp(zOptName, azCompileOpt[i], n)==0)
&& ( (azCompileOpt[i][n]==0) || (azCompileOpt[i][n]=='=') ) ) return 1;
}
return 0;
}
/* This function (for internal use only) locates an element in an
** hash table that matches the given key. The hash for this key has
** already been computed and is passed as the 4th parameter.
*/
static HashElem *findElementGivenHash(
const Hash *pH, /* The pH to be searched */
const char *pKey, /* The key we are searching for */
int nKey, /* Bytes in key (not counting zero terminator) */
unsigned int h /* The hash for this key. */
){
HashElem *elem; /* Used to loop thru the element list */
int count; /* Number of elements left to test */
if( pH->ht ){
struct _ht *pEntry = &pH->ht[h];
elem = pEntry->chain;
count = pEntry->count;
}else{
elem = pH->first;
count = pH->count;
}
while( count-- && ALWAYS(elem) ){
if( elem->nKey==nKey && sqlite3StrNICmp(elem->pKey,pKey,nKey)==0 ){
return elem;
}
elem = elem->next;
}
return 0;
}
/*
** This function looks up an identifier to determine if it is a
** keyword. If it is a keyword, the token code of that keyword is
** returned. If the input is not a keyword, TK_ID is returned.
*/
int sqlite3KeywordCode(const char *z, int n){
int h, i;
Keyword *p;
static char needInit = 1;
if( needInit ){
/* Initialize the keyword hash table */
sqlite3OsEnterMutex();
if( needInit ){
int nk;
nk = sizeof(aKeywordTable)/sizeof(aKeywordTable[0]);
for(i=0; i<nk; i++){
aKeywordTable[i].len = strlen(aKeywordTable[i].zName);
h = sqlite3HashNoCase(aKeywordTable[i].zName, aKeywordTable[i].len);
h %= KEY_HASH_SIZE;
aKeywordTable[i].iNext = aiHashTable[h];
aiHashTable[h] = i+1;
}
needInit = 0;
}
sqlite3OsLeaveMutex();
}
h = sqlite3HashNoCase(z, n) % KEY_HASH_SIZE;
for(i=aiHashTable[h]; i; i=p->iNext){
p = &aKeywordTable[i-1];
if( p->len==n && sqlite3StrNICmp(p->zName, z, n)==0 ){
return p->tokenType;
}
}
return TK_ID;
}
/*
** Parameter zName is the name of a table that is about to be altered
** (either with ALTER TABLE ... RENAME TO or ALTER TABLE ... ADD COLUMN).
** If the table is a system table, this function leaves an error message
** in pParse->zErr (system tables may not be altered) and returns non-zero.
**
** Or, if zName is not a system table, zero is returned.
*/
static int isSystemTable(Parse *pParse, const char *zName){
if( sqlite3Strlen30(zName)>6 && 0==sqlite3StrNICmp(zName, "sqlite_", 7) ){
sqlite3ErrorMsg(pParse, "table %s may not be altered", zName);
return 1;
}
return 0;
}
int sqlcipher_codec_add_random(codec_ctx *ctx, const char *zRight, int random_sz){
const char *suffix = &zRight[random_sz-1];
int n = random_sz - 3; /* adjust for leading x' and tailing ' */
if (n > 0 &&
sqlite3StrNICmp((const char *)zRight ,"x'", 2) == 0 &&
sqlite3StrNICmp(suffix, "'", 1) == 0 &&
n % 2 == 0) {
int rc = 0;
int buffer_sz = n / 2;
unsigned char *random;
const unsigned char *z = (const unsigned char *)zRight + 2; /* adjust lead offset of x' */
CODEC_TRACE(("sqlcipher_codec_add_random: using raw random blob from hex\n"));
random = sqlcipher_malloc(buffer_sz);
memset(random, 0, buffer_sz);
cipher_hex2bin(z, n, random);
rc = ctx->read_ctx->provider->add_random(ctx->read_ctx->provider_ctx, random, buffer_sz);
sqlcipher_free(random, buffer_sz);
return rc;
}
return SQLITE_ERROR;
}
/*
** Another built-in collating sequence: NOCASE.
**
** This collating sequence is intended to be used for "case independant
** comparison". SQLite's knowledge of upper and lower case equivalents
** extends only to the 26 characters used in the English language.
**
** At the moment there is only a UTF-8 implementation.
*/
static int nocaseCollatingFunc(
void *NotUsed,
int nKey1, const void *pKey1,
int nKey2, const void *pKey2
){
int r = sqlite3StrNICmp(
(const char *)pKey1, (const char *)pKey2, (nKey1<nKey2)?nKey1:nKey2);
if( 0==r ){
r = nKey1-nKey2;
}
return r;
}
/*
** Subqueries stores the original database, table and column names for their
** result sets in ExprList.a[].zSpan, in the form "DATABASE.TABLE.COLUMN".
** Check to see if the zSpan given to this routine matches the zDb, zTab,
** and zCol. If any of zDb, zTab, and zCol are NULL then those fields will
** match anything.
*/
int sqlite3MatchSpanName(
const char *zSpan,
const char *zCol,
const char *zTab,
const char *zDb
){
int n;
for(n=0; ALWAYS(zSpan[n]) && zSpan[n]!='.'; n++){}
if( zDb && (sqlite3StrNICmp(zSpan, zDb, n)!=0 || zDb[n]!=0) ){
return 0;
}
zSpan += n+1;
for(n=0; ALWAYS(zSpan[n]) && zSpan[n]!='.'; n++){}
if( zTab && (sqlite3StrNICmp(zSpan, zTab, n)!=0 || zTab[n]!=0) ){
return 0;
}
zSpan += n+1;
if( zCol && sqlite3StrICmp(zSpan, zCol)!=0 ){
return 0;
}
return 1;
}
/*
** Search a FuncDefHash for a function with the given name. Return
** a pointer to the matching FuncDef if found, or 0 if there is no match.
*/
static FuncDef *functionSearch(
FuncDefHash *pHash, /* Hash table to search */
int h, /* Hash of the name */
const char *zFunc, /* Name of function */
int nFunc /* Number of bytes in zFunc */
){
FuncDef *p;
for(p=pHash->a[h]; p; p=p->pHash){
if( sqlite3StrNICmp(p->zName, zFunc, nFunc)==0 && p->zName[nFunc]==0 ){
return p;
}
}
return 0;
}
/*
** Given the name of a compile-time option, return true if that option
** was used and false if not.
**
** The name can optionally begin with "SQLITE_" but the "SQLITE_" prefix
** is not required for a match.
*/
int sqlite3_compileoption_used(const char *zOptName){
int i, n;
#if SQLITE_ENABLE_API_ARMOR
if( zOptName==0 ){
(void)SQLITE_MISUSE_BKPT;
return 0;
}
#endif
if( sqlite3StrNICmp(zOptName, "SQLITE_", 7)==0 ) zOptName += 7;
n = sqlite3Strlen30(zOptName);
/* Since ArraySize(azCompileOpt) is normally in single digits, a
** linear search is adequate. No need for a binary search. */
for(i=0; i<ArraySize(azCompileOpt); i++){
if( sqlite3StrNICmp(zOptName, azCompileOpt[i], n)==0
&& sqlite3IsIdChar((unsigned char)azCompileOpt[i][n])==0
){
return 1;
}
}
return 0;
}
static void codec_prepare_key(sqlite3 *db, const void *zKey, int nKey, void *salt, int nSalt, void *out, int *nOut) {
/* if key data lenth is exactly 256 bits / 32 bytes use the data directly */
if (nKey == 67 && sqlite3StrNICmp(zKey ,"x'", 2) == 0) {
int n = nKey - 3; /* adjust for leading x' and tailing ' */
int half_n = n/2;
const char *z = zKey + 2; /* adjust lead offset of x' */
void *key = sqlite3HexToBlob(db, z, n);
memcpy(out, key, half_n);
*nOut = half_n;
memset(key, 0, half_n); /* cleanup temporary key data */
sqlite3DbFree(db, key);
/* otherwise the key is provided as a string so hash it to get key data */
} else {
*nOut = KEY_LENGTH;
PKCS5_PBKDF2_HMAC_SHA1(zKey, nKey, salt, nSalt, PBKDF2_ITER, KEY_LENGTH, out);
}
}
/*
** Interpret the given string as a safety level. Return 0 for OFF,
** 1 for ON or NORMAL and 2 for FULL. Return 1 for an empty or
** unrecognized string argument.
**
** Note that the values returned are one less that the values that
** should be passed into sqlite3BtreeSetSafetyLevel(). The is done
** to support legacy SQL code. The safety level used to be boolean
** and older scripts may have used numbers 0 for OFF and 1 for ON.
*/
static int getSafetyLevel(const char *z){
/* 123456789 123456789 */
static const char zText[] = "onoffalseyestruefull";
static const u8 iOffset[] = {0, 1, 2, 4, 9, 12, 16};
static const u8 iLength[] = {2, 2, 3, 5, 3, 4, 4};
static const u8 iValue[] = {1, 0, 0, 0, 1, 1, 2};
int i, n;
if( isdigit(*z) ){
return atoi(z);
}
n = strlen(z);
for(i=0; i<sizeof(iLength); i++){
if( iLength[i]==n && sqlite3StrNICmp(&zText[iOffset[i]],z,n)==0 ){
return iValue[i];
}
}
return 1;
}
/**
* Derive an encryption key for a cipher contex key based on the raw password.
*
* If the raw key data is formated as x'hex' and there are exactly enough hex chars to fill
* the key space (i.e 64 hex chars for a 256 bit key) then the key data will be used directly.
*
* Otherwise, a key data will be derived using PBKDF2
*
* returns SQLITE_OK if initialization was successful
* returns SQLITE_NOMEM if the key could't be derived (for instance if pass is NULL or pass_sz is 0)
*/
static int codec_key_derive(codec_ctx *ctx, cipher_ctx *c_ctx) {
CODEC_TRACE(("codec_key_derive: entered c_ctx->pass=%s, c_ctx->pass_sz=%d ctx->kdf_salt=%d ctx->kdf_salt_sz=%d c_ctx->kdf_iter=%d c_ctx->key_sz=%d\n",
c_ctx->pass, c_ctx->pass_sz, ctx->kdf_salt, ctx->kdf_salt_sz, c_ctx->kdf_iter, c_ctx->key_sz));
if(c_ctx->pass && c_ctx->pass_sz) { // if pass is not null
if (c_ctx->pass_sz == ((c_ctx->key_sz*2)+3) && sqlite3StrNICmp(c_ctx->pass ,"x'", 2) == 0) {
int n = c_ctx->pass_sz - 3; /* adjust for leading x' and tailing ' */
const char *z = c_ctx->pass + 2; /* adjust lead offset of x' */
CODEC_TRACE(("codec_key_derive: deriving key from hex\n"));
cipher_hex2bin(z, n, c_ctx->key);
} else {
CODEC_TRACE(("codec_key_derive: deriving key using PBKDF2\n"));
PKCS5_PBKDF2_HMAC_SHA1(c_ctx->pass, c_ctx->pass_sz, ctx->kdf_salt, ctx->kdf_salt_sz, c_ctx->kdf_iter, c_ctx->key_sz, c_ctx->key);
}
return SQLITE_OK;
};
return SQLITE_ERROR;
}
/*
** This routine is called by the parser to process a DETACH statement:
**
** DETACH DATABASE dbname
**
** The pDbname argument is the name of the database in the DETACH statement.
*/
void sqlite3Detach(Parse *pParse, Token *pDbname){
int i;
sqlite3 *db;
Vdbe *v;
Db *pDb = 0;
v = sqlite3GetVdbe(pParse);
if( !v ) return;
sqlite3VdbeAddOp(v, OP_Halt, 0, 0);
if( pParse->explain ) return;
db = pParse->db;
for(i=0; i<db->nDb; i++){
pDb = &db->aDb[i];
if( pDb->pBt==0 || pDb->zName==0 ) continue;
if( strlen(pDb->zName)!=pDbname->n ) continue;
if( sqlite3StrNICmp(pDb->zName, pDbname->z, pDbname->n)==0 ) break;
}
if( i>=db->nDb ){
sqlite3ErrorMsg(pParse, "no such database: %T", pDbname);
return;
}
if( i<2 ){
sqlite3ErrorMsg(pParse, "cannot detach database %T", pDbname);
return;
}
if( !db->autoCommit ){
sqlite3ErrorMsg(pParse, "cannot DETACH database within transaction");
pParse->rc = SQLITE_ERROR;
return;
}
#ifndef SQLITE_OMIT_AUTHORIZATION
if( sqlite3AuthCheck(pParse,SQLITE_DETACH,db->aDb[i].zName,0,0)!=SQLITE_OK ){
return;
}
#endif /* SQLITE_OMIT_AUTHORIZATION */
sqlite3BtreeClose(pDb->pBt);
pDb->pBt = 0;
sqlite3ResetInternalSchema(db, 0);
}
/*
** Invoke a virtual table constructor (either xCreate or xConnect). The
** pointer to the function to invoke is passed as the fourth parameter
** to this procedure.
*/
static int vtabCallConstructor(
sqlite3 *db,
Table *pTab,
Module *pMod,
int (*xConstruct)(sqlite3*,void*,int,const char*const*,sqlite3_vtab**,char**),
char **pzErr
){
VTable *pVTable;
int rc;
const char *const*azArg = (const char *const*)pTab->azModuleArg;
int nArg = pTab->nModuleArg;
char *zErr = 0;
char *zModuleName = sqlite3MPrintf(db, "%s", pTab->zName);
if( !zModuleName ){
return SQLITE_NOMEM;
}
pVTable = sqlite3DbMallocZero(db, sizeof(VTable));
if( !pVTable ){
sqlite3DbFree(db, zModuleName);
return SQLITE_NOMEM;
}
pVTable->db = db;
pVTable->pMod = pMod;
assert( !db->pVTab );
assert( xConstruct );
db->pVTab = pTab;
/* Invoke the virtual table constructor */
rc = xConstruct(db, pMod->pAux, nArg, azArg, &pVTable->pVtab, &zErr);
if( rc==SQLITE_NOMEM ) db->mallocFailed = 1;
if( SQLITE_OK!=rc ){
if( zErr==0 ){
*pzErr = sqlite3MPrintf(db, "vtable constructor failed: %s", zModuleName);
}else {
*pzErr = sqlite3MPrintf(db, "%s", zErr);
sqlite3DbFree(db, zErr);
}
sqlite3DbFree(db, pVTable);
}else if( ALWAYS(pVTable->pVtab) ){
/* Justification of ALWAYS(): A correct vtab constructor must allocate
** the sqlite3_vtab object if successful. */
pVTable->pVtab->pModule = pMod->pModule;
pVTable->nRef = 1;
if( db->pVTab ){
const char *zFormat = "vtable constructor did not declare schema: %s";
*pzErr = sqlite3MPrintf(db, zFormat, pTab->zName);
sqlite3VtabUnlock(pVTable);
rc = SQLITE_ERROR;
}else{
int iCol;
/* If everything went according to plan, link the new VTable structure
** into the linked list headed by pTab->pVTable. Then loop through the
** columns of the table to see if any of them contain the token "hidden".
** If so, set the Column.isHidden flag and remove the token from
** the type string. */
pVTable->pNext = pTab->pVTable;
pTab->pVTable = pVTable;
for(iCol=0; iCol<pTab->nCol; iCol++){
char *zType = pTab->aCol[iCol].zType;
int nType;
int i = 0;
if( !zType ) continue;
nType = sqlite3Strlen30(zType);
if( sqlite3StrNICmp("hidden", zType, 6)||(zType[6] && zType[6]!=' ') ){
for(i=0; i<nType; i++){
if( (0==sqlite3StrNICmp(" hidden", &zType[i], 7))
&& (zType[i+7]=='\0' || zType[i+7]==' ')
){
i++;
break;
}
}
}
if( i<nType ){
int j;
int nDel = 6 + (zType[i+6] ? 1 : 0);
for(j=i; (j+nDel)<=nType; j++){
zType[j] = zType[j+nDel];
}
if( zType[i]=='\0' && i>0 ){
assert(zType[i-1]==' ');
zType[i-1] = '\0';
}
pTab->aCol[iCol].isHidden = 1;
}
}
}
}
sqlite3DbFree(db, zModuleName);
db->pVTab = 0;
return rc;
}
/*
** Process an UPDATE statement.
**
** UPDATE OR IGNORE table_wxyz SET a=b, c=d WHERE e<5 AND f NOT NULL;
** \_______/ \________/ \______/ \________________/
* onError pTabList pChanges pWhere
*/
void sqlite3Update(
Parse *pParse, /* The parser context */
SrcList *pTabList, /* The table in which we should change things */
ExprList *pChanges, /* Things to be changed */
Expr *pWhere, /* The WHERE clause. May be null */
int onError /* How to handle constraint errors */
){
int i, j; /* Loop counters */
Table *pTab; /* The table to be updated */
int addrTop = 0; /* VDBE instruction address of the start of the loop */
WhereInfo *pWInfo; /* Information about the WHERE clause */
Vdbe *v; /* The virtual database engine */
Index *pIdx; /* For looping over indices */
Index *pPk; /* The PRIMARY KEY index for WITHOUT ROWID tables */
int nIdx; /* Number of indices that need updating */
int iBaseCur; /* Base cursor number */
int iDataCur; /* Cursor for the canonical data btree */
int iIdxCur; /* Cursor for the first index */
sqlite3 *db; /* The database structure */
int *aRegIdx = 0; /* One register assigned to each index to be updated */
int *aXRef = 0; /* aXRef[i] is the index in pChanges->a[] of the
** an expression for the i-th column of the table.
** aXRef[i]==-1 if the i-th column is not changed. */
u8 *aToOpen; /* 1 for tables and indices to be opened */
u8 chngPk; /* PRIMARY KEY changed in a WITHOUT ROWID table */
u8 chngRowid; /* Rowid changed in a normal table */
u8 chngKey; /* Either chngPk or chngRowid */
Expr *pRowidExpr = 0; /* Expression defining the new record number */
AuthContext sContext; /* The authorization context */
NameContext sNC; /* The name-context to resolve expressions in */
int iDb; /* Database containing the table being updated */
int okOnePass; /* True for one-pass algorithm without the FIFO */
int hasFK; /* True if foreign key processing is required */
int labelBreak; /* Jump here to break out of UPDATE loop */
int labelContinue; /* Jump here to continue next step of UPDATE loop */
#ifndef SQLITE_OMIT_TRIGGER
int isView; /* True when updating a view (INSTEAD OF trigger) */
Trigger *pTrigger; /* List of triggers on pTab, if required */
int tmask; /* Mask of TRIGGER_BEFORE|TRIGGER_AFTER */
#endif
int newmask; /* Mask of NEW.* columns accessed by BEFORE triggers */
int iEph = 0; /* Ephemeral table holding all primary key values */
int nKey = 0; /* Number of elements in regKey for WITHOUT ROWID */
int aiCurOnePass[2]; /* The write cursors opened by WHERE_ONEPASS */
/* Register Allocations */
int regRowCount = 0; /* A count of rows changed */
int regOldRowid; /* The old rowid */
int regNewRowid; /* The new rowid */
int regNew; /* Content of the NEW.* table in triggers */
int regOld = 0; /* Content of OLD.* table in triggers */
int regRowSet = 0; /* Rowset of rows to be updated */
int regKey = 0; /* composite PRIMARY KEY value */
memset(&sContext, 0, sizeof(sContext));
db = pParse->db;
if( pParse->nErr || db->mallocFailed ){
goto update_cleanup;
}
assert( pTabList->nSrc==1 );
/* Locate the table which we want to update.
*/
pTab = sqlite3SrcListLookup(pParse, pTabList);
if( pTab==0 ) goto update_cleanup;
iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
#if defined(SQLITE_ENABLE_SELINUX)
if(0!=sqlite3StrNICmp(pTab->zName, "sqlite_", 7) && 0!=sqlite3StrNICmp(pTab->zName, "selinux_", 8)) {
/* MODIFIED */
Expr *pNewWhere = NULL;
char *f_name = sqlite3MPrintf(db, "%s", "selinux_check_access");
char *f_column = sqlite3MPrintf(db, "%s", "security_context");
char *f_class = sqlite3MPrintf(db, "%s", "db_tuple");
char *f_action = sqlite3MPrintf(db, "%s", "update");
for(i = 0; i < pTabList->nAlloc; i++){
Expr *pFName = sqlite3DbMallocZero(db, sizeof(Expr) + strlen(f_name) + 1);
Expr *pFTable = sqlite3DbMallocZero(db, sizeof(Expr) + strlen(pTabList->a[i].zName) + 1);
Expr *pFColumn = sqlite3DbMallocZero(db, sizeof(Expr) + strlen(f_column) + 1);
Expr *pFClass = sqlite3DbMallocZero(db, sizeof(Expr) + strlen(f_class) + 1);
Expr *pFAction = sqlite3DbMallocZero(db, sizeof(Expr) + strlen(f_action) + 1);
Expr *pFDebug = sqlite3DbMallocZero(db, sizeof(Expr) + strlen(pTabList->a[i].zName) + 1);
Expr *pFunction = sqlite3DbMallocZero(db, sizeof(Expr));
pFName->op = (u8)153;
pFName->iAgg = -1;
pFTable->op = (u8)27;
pFTable->iAgg = -1;
pFColumn->op = (u8)27;
pFColumn->iAgg = -1;
pFClass->op = (u8)97;
pFClass->iAgg = -1;
pFAction->op = (u8)97;
pFAction->iAgg = -1;
pFDebug->op = (u8)97;
pFDebug->iAgg = -1;
pFunction->op = (u8)122;
pFunction->iAgg = -1;
pFName->u.zToken = (char*)&pFName[1];
pFTable->u.zToken = (char*)&pFTable[1];
pFColumn->u.zToken = (char*)&pFColumn[1];
pFClass->u.zToken = (char*)&pFClass[1];
pFAction->u.zToken = (char*)&pFAction[1];
pFDebug->u.zToken = (char*)&pFDebug[1];
memcpy(pFName->u.zToken, f_name, strlen(f_name));
memcpy(pFTable->u.zToken, pTabList->a[i].zName, strlen(pTabList->a[i].zName));
memcpy(pFColumn->u.zToken, f_column, strlen(f_column));
memcpy(pFClass->u.zToken, f_class, strlen(f_class));
memcpy(pFAction->u.zToken, f_action, strlen(f_action));
memcpy(pFDebug->u.zToken, pTabList->a[i].zName, strlen(pTabList->a[i].zName));
pFName->u.zToken[strlen(f_name)] = 0;
pFTable->u.zToken[strlen(pTabList->a[i].zName)] = 0;
pFColumn->u.zToken[strlen(f_column)] = 0;
pFClass->u.zToken[strlen(f_class)] = 0;
pFAction->u.zToken[strlen(f_action)] = 0;
pFDebug->u.zToken[strlen(pTabList->a[i].zName)] = 0;
pFName->nHeight = 1;
pFTable->nHeight = 1;
pFColumn->nHeight = 1;
pFClass->nHeight = 1;
pFAction->nHeight = 1;
pFDebug->nHeight = 1;
sqlite3ExprAttachSubtrees(db, pFunction, pFTable, pFColumn);
ExprList *pExprFunction;
pExprFunction = sqlite3ExprListAppend(pParse, 0, pFunction);
pExprFunction = sqlite3ExprListAppend(pParse, pExprFunction, pFClass);
pExprFunction = sqlite3ExprListAppend(pParse, pExprFunction, pFAction);
pExprFunction = sqlite3ExprListAppend(pParse, pExprFunction, pFDebug);
pFName->x.pList = pExprFunction;
sqlite3ExprSetHeight(pParse, pFName);
if(pNewWhere)
pNewWhere = sqlite3ExprAnd(db, pFName, pNewWhere);
else
pNewWhere = pFName;
}
if(pWhere)
pWhere = sqlite3ExprAnd(db, pNewWhere, pWhere);
else
pWhere = pNewWhere;
}
/* ------------------------------------------------------------ */
#endif /* defined(SQLITE_ENABLE_SELINUX) */
/* Figure out if we have any triggers and if the table being
** updated is a view.
*/
#ifndef SQLITE_OMIT_TRIGGER
pTrigger = sqlite3TriggersExist(pParse, pTab, TK_UPDATE, pChanges, &tmask);
isView = pTab->pSelect!=0;
assert( pTrigger || tmask==0 );
#else
# define pTrigger 0
# define isView 0
# define tmask 0
#endif
#ifdef SQLITE_OMIT_VIEW
# undef isView
# define isView 0
#endif
if( sqlite3ViewGetColumnNames(pParse, pTab) ){
goto update_cleanup;
}
if( sqlite3IsReadOnly(pParse, pTab, tmask) ){
goto update_cleanup;
}
/* Allocate a cursors for the main database table and for all indices.
** The index cursors might not be used, but if they are used they
** need to occur right after the database cursor. So go ahead and
** allocate enough space, just in case.
*/
pTabList->a[0].iCursor = iBaseCur = iDataCur = pParse->nTab++;
iIdxCur = iDataCur+1;
pPk = HasRowid(pTab) ? 0 : sqlite3PrimaryKeyIndex(pTab);
for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){
if( pIdx->autoIndex==2 && pPk!=0 ){
iDataCur = pParse->nTab;
pTabList->a[0].iCursor = iDataCur;
}
pParse->nTab++;
}
/* Allocate space for aXRef[], aRegIdx[], and aToOpen[].
** Initialize aXRef[] and aToOpen[] to their default values.
*/
aXRef = sqlite3DbMallocRaw(db, sizeof(int) * (pTab->nCol+nIdx) + nIdx+2 );
if( aXRef==0 ) goto update_cleanup;
aRegIdx = aXRef+pTab->nCol;
aToOpen = (u8*)(aRegIdx+nIdx);
memset(aToOpen, 1, nIdx+1);
aToOpen[nIdx+1] = 0;
for(i=0; i<pTab->nCol; i++) aXRef[i] = -1;
/* Initialize the name-context */
memset(&sNC, 0, sizeof(sNC));
sNC.pParse = pParse;
sNC.pSrcList = pTabList;
/* Resolve the column names in all the expressions of the
** of the UPDATE statement. Also find the column index
** for each column to be updated in the pChanges array. For each
** column to be updated, make sure we have authorization to change
** that column.
*/
chngRowid = chngPk = 0;
for(i=0; i<pChanges->nExpr; i++){
if( sqlite3ResolveExprNames(&sNC, pChanges->a[i].pExpr) ){
goto update_cleanup;
}
for(j=0; j<pTab->nCol; j++){
if( sqlite3StrICmp(pTab->aCol[j].zName, pChanges->a[i].zName)==0 ){
if( j==pTab->iPKey ){
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}else if( pPk && (pTab->aCol[j].colFlags & COLFLAG_PRIMKEY)!=0 ){
chngPk = 1;
}
aXRef[j] = i;
break;
}
}
if( j>=pTab->nCol ){
if( pPk==0 && sqlite3IsRowid(pChanges->a[i].zName) ){
j = -1;
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}else{
sqlite3ErrorMsg(pParse, "no such column: %s", pChanges->a[i].zName);
pParse->checkSchema = 1;
goto update_cleanup;
}
}
#ifndef SQLITE_OMIT_AUTHORIZATION
{
int rc;
rc = sqlite3AuthCheck(pParse, SQLITE_UPDATE, pTab->zName,
j<0 ? "ROWID" : pTab->aCol[j].zName,
db->aDb[iDb].zName);
if( rc==SQLITE_DENY ){
goto update_cleanup;
}else if( rc==SQLITE_IGNORE ){
aXRef[j] = -1;
}
}
#endif
}
assert( (chngRowid & chngPk)==0 );
assert( chngRowid==0 || chngRowid==1 );
assert( chngPk==0 || chngPk==1 );
chngKey = chngRowid + chngPk;
/* The SET expressions are not actually used inside the WHERE loop.
** So reset the colUsed mask
*/
pTabList->a[0].colUsed = 0;
hasFK = sqlite3FkRequired(pParse, pTab, aXRef, chngKey);
/* There is one entry in the aRegIdx[] array for each index on the table
** being updated. Fill in aRegIdx[] with a register number that will hold
** the key for accessing each index.
*/
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
int reg;
if( chngKey || hasFK || pIdx->pPartIdxWhere || pIdx==pPk ){
reg = ++pParse->nMem;
}else{
reg = 0;
for(i=0; i<pIdx->nKeyCol; i++){
if( aXRef[pIdx->aiColumn[i]]>=0 ){
reg = ++pParse->nMem;
break;
}
}
}
if( reg==0 ) aToOpen[j+1] = 0;
aRegIdx[j] = reg;
}
/* Begin generating code. */
v = sqlite3GetVdbe(pParse);
if( v==0 ) goto update_cleanup;
if( pParse->nested==0 ) sqlite3VdbeCountChanges(v);
sqlite3BeginWriteOperation(pParse, 1, iDb);
#ifndef SQLITE_OMIT_VIRTUALTABLE
/* Virtual tables must be handled separately */
if( IsVirtual(pTab) ){
updateVirtualTable(pParse, pTabList, pTab, pChanges, pRowidExpr, aXRef,
pWhere, onError);
pWhere = 0;
pTabList = 0;
goto update_cleanup;
}
#endif
/* Allocate required registers. */
regRowSet = ++pParse->nMem;
regOldRowid = regNewRowid = ++pParse->nMem;
if( chngPk || pTrigger || hasFK ){
regOld = pParse->nMem + 1;
pParse->nMem += pTab->nCol;
}
if( chngKey || pTrigger || hasFK ){
regNewRowid = ++pParse->nMem;
}
regNew = pParse->nMem + 1;
pParse->nMem += pTab->nCol;
/* Start the view context. */
if( isView ){
sqlite3AuthContextPush(pParse, &sContext, pTab->zName);
}
/* If we are trying to update a view, realize that view into
** a ephemeral table.
*/
#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
if( isView ){
sqlite3MaterializeView(pParse, pTab, pWhere, iDataCur);
}
#endif
/* Resolve the column names in all the expressions in the
** WHERE clause.
*/
if( sqlite3ResolveExprNames(&sNC, pWhere) ){
goto update_cleanup;
}
/* Begin the database scan
*/
if( HasRowid(pTab) ){
sqlite3VdbeAddOp3(v, OP_Null, 0, regRowSet, regOldRowid);
pWInfo = sqlite3WhereBegin(
pParse, pTabList, pWhere, 0, 0, WHERE_ONEPASS_DESIRED, iIdxCur
);
if( pWInfo==0 ) goto update_cleanup;
okOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass);
/* Remember the rowid of every item to be updated.
*/
sqlite3VdbeAddOp2(v, OP_Rowid, iDataCur, regOldRowid);
if( !okOnePass ){
sqlite3VdbeAddOp2(v, OP_RowSetAdd, regRowSet, regOldRowid);
}
/* End the database scan loop.
*/
sqlite3WhereEnd(pWInfo);
}else{
int iPk; /* First of nPk memory cells holding PRIMARY KEY value */
i16 nPk; /* Number of components of the PRIMARY KEY */
int addrOpen; /* Address of the OpenEphemeral instruction */
assert( pPk!=0 );
nPk = pPk->nKeyCol;
iPk = pParse->nMem+1;
pParse->nMem += nPk;
regKey = ++pParse->nMem;
iEph = pParse->nTab++;
sqlite3VdbeAddOp2(v, OP_Null, 0, iPk);
addrOpen = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iEph, nPk);
sqlite3VdbeSetP4KeyInfo(pParse, pPk);
pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0, 0,
WHERE_ONEPASS_DESIRED, iIdxCur);
if( pWInfo==0 ) goto update_cleanup;
okOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass);
for(i=0; i<nPk; i++){
sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, pPk->aiColumn[i],
iPk+i);
}
if( okOnePass ){
sqlite3VdbeChangeToNoop(v, addrOpen);
nKey = nPk;
regKey = iPk;
}else{
sqlite3VdbeAddOp4(v, OP_MakeRecord, iPk, nPk, regKey,
sqlite3IndexAffinityStr(v, pPk), nPk);
sqlite3VdbeAddOp2(v, OP_IdxInsert, iEph, regKey);
}
sqlite3WhereEnd(pWInfo);
}
/* Initialize the count of updated rows
*/
if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab ){
regRowCount = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount);
}
labelBreak = sqlite3VdbeMakeLabel(v);
if( !isView ){
/*
** Open every index that needs updating. Note that if any
** index could potentially invoke a REPLACE conflict resolution
** action, then we need to open all indices because we might need
** to be deleting some records.
*/
if( onError==OE_Replace ){
memset(aToOpen, 1, nIdx+1);
}else{
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
if( pIdx->onError==OE_Replace ){
memset(aToOpen, 1, nIdx+1);
break;
}
}
}
if( okOnePass ){
if( aiCurOnePass[0]>=0 ) aToOpen[aiCurOnePass[0]-iBaseCur] = 0;
if( aiCurOnePass[1]>=0 ) aToOpen[aiCurOnePass[1]-iBaseCur] = 0;
}
sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, iBaseCur, aToOpen,
0, 0);
}
/* Top of the update loop */
if( okOnePass ){
if( aToOpen[iDataCur-iBaseCur] ){
assert( pPk!=0 );
sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelBreak, regKey, nKey);
VdbeCoverageNeverTaken(v);
}
labelContinue = labelBreak;
sqlite3VdbeAddOp2(v, OP_IsNull, pPk ? regKey : regOldRowid, labelBreak);
VdbeCoverage(v);
}else if( pPk ){
labelContinue = sqlite3VdbeMakeLabel(v);
sqlite3VdbeAddOp2(v, OP_Rewind, iEph, labelBreak); VdbeCoverage(v);
addrTop = sqlite3VdbeAddOp2(v, OP_RowKey, iEph, regKey);
sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue, regKey, 0);
VdbeCoverage(v);
}else{
labelContinue = sqlite3VdbeAddOp3(v, OP_RowSetRead, regRowSet, labelBreak,
regOldRowid);
VdbeCoverage(v);
sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid);
VdbeCoverage(v);
}
/* If the record number will change, set register regNewRowid to
** contain the new value. If the record number is not being modified,
** then regNewRowid is the same register as regOldRowid, which is
** already populated. */
assert( chngKey || pTrigger || hasFK || regOldRowid==regNewRowid );
if( chngRowid ){
sqlite3ExprCode(pParse, pRowidExpr, regNewRowid);
sqlite3VdbeAddOp1(v, OP_MustBeInt, regNewRowid); VdbeCoverage(v);
}
/* Compute the old pre-UPDATE content of the row being changed, if that
** information is needed */
if( chngPk || hasFK || pTrigger ){
u32 oldmask = (hasFK ? sqlite3FkOldmask(pParse, pTab) : 0);
oldmask |= sqlite3TriggerColmask(pParse,
pTrigger, pChanges, 0, TRIGGER_BEFORE|TRIGGER_AFTER, pTab, onError
);
for(i=0; i<pTab->nCol; i++){
if( oldmask==0xffffffff
|| (i<32 && (oldmask & MASKBIT32(i))!=0)
|| (pTab->aCol[i].colFlags & COLFLAG_PRIMKEY)!=0
){
testcase( oldmask!=0xffffffff && i==31 );
sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regOld+i);
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, regOld+i);
}
}
if( chngRowid==0 && pPk==0 ){
sqlite3VdbeAddOp2(v, OP_Copy, regOldRowid, regNewRowid);
}
}
/* Populate the array of registers beginning at regNew with the new
** row data. This array is used to check constaints, create the new
** table and index records, and as the values for any new.* references
** made by triggers.
**
** If there are one or more BEFORE triggers, then do not populate the
** registers associated with columns that are (a) not modified by
** this UPDATE statement and (b) not accessed by new.* references. The
** values for registers not modified by the UPDATE must be reloaded from
** the database after the BEFORE triggers are fired anyway (as the trigger
** may have modified them). So not loading those that are not going to
** be used eliminates some redundant opcodes.
*/
newmask = sqlite3TriggerColmask(
pParse, pTrigger, pChanges, 1, TRIGGER_BEFORE, pTab, onError
);
/*sqlite3VdbeAddOp3(v, OP_Null, 0, regNew, regNew+pTab->nCol-1);*/
for(i=0; i<pTab->nCol; i++){
if( i==pTab->iPKey ){
sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i);
}else{
j = aXRef[i];
if( j>=0 ){
sqlite3ExprCode(pParse, pChanges->a[j].pExpr, regNew+i);
}else if( 0==(tmask&TRIGGER_BEFORE) || i>31 || (newmask & MASKBIT32(i)) ){
/* This branch loads the value of a column that will not be changed
** into a register. This is done if there are no BEFORE triggers, or
** if there are one or more BEFORE triggers that use this value via
** a new.* reference in a trigger program.
*/
testcase( i==31 );
testcase( i==32 );
sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regNew+i);
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i);
}
}
}
/* Fire any BEFORE UPDATE triggers. This happens before constraints are
** verified. One could argue that this is wrong.
*/
if( tmask&TRIGGER_BEFORE ){
sqlite3TableAffinity(v, pTab, regNew);
sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges,
TRIGGER_BEFORE, pTab, regOldRowid, onError, labelContinue);
/* The row-trigger may have deleted the row being updated. In this
** case, jump to the next row. No updates or AFTER triggers are
** required. This behavior - what happens when the row being updated
** is deleted or renamed by a BEFORE trigger - is left undefined in the
** documentation.
*/
if( pPk ){
sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue,regKey,nKey);
VdbeCoverage(v);
}else{
sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid);
VdbeCoverage(v);
}
/* If it did not delete it, the row-trigger may still have modified
** some of the columns of the row being updated. Load the values for
** all columns not modified by the update statement into their
** registers in case this has happened.
*/
for(i=0; i<pTab->nCol; i++){
if( aXRef[i]<0 && i!=pTab->iPKey ){
sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regNew+i);
}
}
}
if( !isView ){
int j1 = 0; /* Address of jump instruction */
int bReplace = 0; /* True if REPLACE conflict resolution might happen */
/* Do constraint checks. */
assert( regOldRowid>0 );
sqlite3GenerateConstraintChecks(pParse, pTab, aRegIdx, iDataCur, iIdxCur,
regNewRowid, regOldRowid, chngKey, onError, labelContinue, &bReplace);
/* Do FK constraint checks. */
if( hasFK ){
sqlite3FkCheck(pParse, pTab, regOldRowid, 0, aXRef, chngKey);
}
/* Delete the index entries associated with the current record. */
if( bReplace || chngKey ){
if( pPk ){
j1 = sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, 0, regKey, nKey);
}else{
j1 = sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, 0, regOldRowid);
}
VdbeCoverageNeverTaken(v);
}
sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur, aRegIdx);
/* If changing the record number, delete the old record. */
if( hasFK || chngKey || pPk!=0 ){
sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, 0);
}
if( bReplace || chngKey ){
sqlite3VdbeJumpHere(v, j1);
}
if( hasFK ){
sqlite3FkCheck(pParse, pTab, 0, regNewRowid, aXRef, chngKey);
}
/* Insert the new index entries and the new record. */
sqlite3CompleteInsertion(pParse, pTab, iDataCur, iIdxCur,
regNewRowid, aRegIdx, 1, 0, 0);
/* Do any ON CASCADE, SET NULL or SET DEFAULT operations required to
** handle rows (possibly in other tables) that refer via a foreign key
** to the row just updated. */
if( hasFK ){
sqlite3FkActions(pParse, pTab, pChanges, regOldRowid, aXRef, chngKey);
}
}
/* Increment the row counter
*/
if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab){
sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1);
}
sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges,
TRIGGER_AFTER, pTab, regOldRowid, onError, labelContinue);
/* Repeat the above with the next record to be updated, until
** all record selected by the WHERE clause have been updated.
*/
if( okOnePass ){
/* Nothing to do at end-of-loop for a single-pass */
}else if( pPk ){
sqlite3VdbeResolveLabel(v, labelContinue);
sqlite3VdbeAddOp2(v, OP_Next, iEph, addrTop); VdbeCoverage(v);
}else{
sqlite3VdbeAddOp2(v, OP_Goto, 0, labelContinue);
}
sqlite3VdbeResolveLabel(v, labelBreak);
/* Close all tables */
for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
assert( aRegIdx );
if( aToOpen[i+1] ){
sqlite3VdbeAddOp2(v, OP_Close, iIdxCur+i, 0);
}
}
if( iDataCur<iIdxCur ) sqlite3VdbeAddOp2(v, OP_Close, iDataCur, 0);
/* Update the sqlite_sequence table by storing the content of the
** maximum rowid counter values recorded while inserting into
** autoincrement tables.
*/
if( pParse->nested==0 && pParse->pTriggerTab==0 ){
sqlite3AutoincrementEnd(pParse);
}
/*
** Return the number of rows that were changed. If this routine is
** generating code because of a call to sqlite3NestedParse(), do not
** invoke the callback function.
*/
if( (db->flags&SQLITE_CountRows) && !pParse->pTriggerTab && !pParse->nested ){
sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows updated", SQLITE_STATIC);
}
update_cleanup:
sqlite3AuthContextPop(&sContext);
sqlite3DbFree(db, aXRef); /* Also frees aRegIdx[] and aToOpen[] */
sqlite3SrcListDelete(db, pTabList);
sqlite3ExprListDelete(db, pChanges);
sqlite3ExprDelete(db, pWhere);
return;
}
/**
* Derive an encryption key for a cipher contex key based on the raw password.
*
* If the raw key data is formated as x'hex' and there are exactly enough hex chars to fill
* the key (i.e 64 hex chars for a 256 bit key) then the key data will be used directly.
* Else, if the raw key data is formated as x'hex' and there are exactly enough hex chars to fill
* the key and the salt (i.e 92 hex chars for a 256 bit key and 16 byte salt) then it will be unpacked
* as the key followed by the salt.
*
* Otherwise, a key data will be derived using PBKDF2
*
* returns SQLITE_OK if initialization was successful
* returns SQLITE_ERROR if the key could't be derived (for instance if pass is NULL or pass_sz is 0)
*/
static int sqlcipher_cipher_ctx_key_derive(codec_ctx *ctx, cipher_ctx *c_ctx) {
int rc;
CODEC_TRACE(("cipher_ctx_key_derive: entered c_ctx->pass=%s, c_ctx->pass_sz=%d \
ctx->kdf_salt=%p ctx->kdf_salt_sz=%d c_ctx->kdf_iter=%d \
ctx->hmac_kdf_salt=%p, c_ctx->fast_kdf_iter=%d c_ctx->key_sz=%d\n",
c_ctx->pass, c_ctx->pass_sz, ctx->kdf_salt, ctx->kdf_salt_sz, c_ctx->kdf_iter,
ctx->hmac_kdf_salt, c_ctx->fast_kdf_iter, c_ctx->key_sz));
if(c_ctx->pass && c_ctx->pass_sz) { // if pass is not null
if(ctx->need_kdf_salt) {
if(ctx->read_ctx->provider->random(ctx->read_ctx->provider_ctx, ctx->kdf_salt, FILE_HEADER_SZ) != SQLITE_OK) return SQLITE_ERROR;
ctx->need_kdf_salt = 0;
}
if (c_ctx->pass_sz == ((c_ctx->key_sz * 2) + 3) && sqlite3StrNICmp((const char *)c_ctx->pass ,"x'", 2) == 0) {
int n = c_ctx->pass_sz - 3; /* adjust for leading x' and tailing ' */
const unsigned char *z = c_ctx->pass + 2; /* adjust lead offset of x' */
CODEC_TRACE(("cipher_ctx_key_derive: using raw key from hex\n"));
cipher_hex2bin(z, n, c_ctx->key);
} else if (c_ctx->pass_sz == (((c_ctx->key_sz + ctx->kdf_salt_sz) * 2) + 3) && sqlite3StrNICmp((const char *)c_ctx->pass ,"x'", 2) == 0) {
const unsigned char *z = c_ctx->pass + 2; /* adjust lead offset of x' */
CODEC_TRACE(("cipher_ctx_key_derive: using raw key from hex\n"));
cipher_hex2bin(z, (c_ctx->key_sz * 2), c_ctx->key);
cipher_hex2bin(z + (c_ctx->key_sz * 2), (ctx->kdf_salt_sz * 2), ctx->kdf_salt);
} else {
CODEC_TRACE(("cipher_ctx_key_derive: deriving key using full PBKDF2 with %d iterations\n", c_ctx->kdf_iter));
c_ctx->provider->kdf(c_ctx->provider_ctx, c_ctx->pass, c_ctx->pass_sz,
ctx->kdf_salt, ctx->kdf_salt_sz, c_ctx->kdf_iter,
c_ctx->key_sz, c_ctx->key);
}
/* set the context "keyspec" containing the hex-formatted key and salt to be used when attaching databases */
if((rc = sqlcipher_cipher_ctx_set_keyspec(c_ctx, c_ctx->key, c_ctx->key_sz, ctx->kdf_salt, ctx->kdf_salt_sz)) != SQLITE_OK) return rc;
/* if this context is setup to use hmac checks, generate a seperate and different
key for HMAC. In this case, we use the output of the previous KDF as the input to
this KDF run. This ensures a distinct but predictable HMAC key. */
if(c_ctx->flags & CIPHER_FLAG_HMAC) {
int i;
/* start by copying the kdf key into the hmac salt slot
then XOR it with the fixed hmac salt defined at compile time
this ensures that the salt passed in to derive the hmac key, while
easy to derive and publically known, is not the same as the salt used
to generate the encryption key */
memcpy(ctx->hmac_kdf_salt, ctx->kdf_salt, ctx->kdf_salt_sz);
for(i = 0; i < ctx->kdf_salt_sz; i++) {
ctx->hmac_kdf_salt[i] ^= hmac_salt_mask;
}
CODEC_TRACE(("cipher_ctx_key_derive: deriving hmac key from encryption key using PBKDF2 with %d iterations\n",
c_ctx->fast_kdf_iter));
c_ctx->provider->kdf(c_ctx->provider_ctx, c_ctx->key, c_ctx->key_sz,
ctx->hmac_kdf_salt, ctx->kdf_salt_sz, c_ctx->fast_kdf_iter,
c_ctx->key_sz, c_ctx->hmac_key);
}
c_ctx->derive_key = 0;
return SQLITE_OK;
};
return SQLITE_ERROR;
}
/*
** Return TRUE if the given SQL string ends in a semicolon.
**
** Special handling is require for CREATE TRIGGER statements.
** Whenever the CREATE TRIGGER keywords are seen, the statement
** must end with ";END;".
**
** This implementation uses a state machine with 7 states:
**
** (0) START At the beginning or end of an SQL statement. This routine
** returns 1 if it ends in the START state and 0 if it ends
** in any other state.
**
** (1) EXPLAIN The keyword EXPLAIN has been seen at the beginning of
** a statement.
**
** (2) CREATE The keyword CREATE has been seen at the beginning of a
** statement, possibly preceeded by EXPLAIN and/or followed by
** TEMP or TEMPORARY
**
** (3) NORMAL We are in the middle of statement which ends with a single
** semicolon.
**
** (4) TRIGGER We are in the middle of a trigger definition that must be
** ended by a semicolon, the keyword END, and another semicolon.
**
** (5) SEMI We've seen the first semicolon in the ";END;" that occurs at
** the end of a trigger definition.
**
** (6) END We've seen the ";END" of the ";END;" that occurs at the end
** of a trigger difinition.
**
** Transitions between states above are determined by tokens extracted
** from the input. The following tokens are significant:
**
** (0) tkEXPLAIN The "explain" keyword.
** (1) tkCREATE The "create" keyword.
** (2) tkTEMP The "temp" or "temporary" keyword.
** (3) tkTRIGGER The "trigger" keyword.
** (4) tkEND The "end" keyword.
** (5) tkSEMI A semicolon.
** (6) tkWS Whitespace
** (7) tkOTHER Any other SQL token.
**
** Whitespace never causes a state transition and is always ignored.
*/
int sqlite3_complete(const char *zSql){
u8 state = 0; /* Current state, using numbers defined in header comment */
u8 token; /* Value of the next token */
/* The following matrix defines the transition from one state to another
** according to what token is seen. trans[state][token] returns the
** next state.
*/
static const u8 trans[7][8] = {
/* Token: */
/* State: ** EXPLAIN CREATE TEMP TRIGGER END SEMI WS OTHER */
/* 0 START: */ { 1, 2, 3, 3, 3, 0, 0, 3, },
/* 1 EXPLAIN: */ { 3, 2, 3, 3, 3, 0, 1, 3, },
/* 2 CREATE: */ { 3, 3, 2, 4, 3, 0, 2, 3, },
/* 3 NORMAL: */ { 3, 3, 3, 3, 3, 0, 3, 3, },
/* 4 TRIGGER: */ { 4, 4, 4, 4, 4, 5, 4, 4, },
/* 5 SEMI: */ { 4, 4, 4, 4, 6, 5, 5, 4, },
/* 6 END: */ { 4, 4, 4, 4, 4, 0, 6, 4, },
};
while( *zSql ){
switch( *zSql ){
case ';': { /* A semicolon */
token = tkSEMI;
break;
}
case ' ':
case '\r':
case '\t':
case '\n':
case '\f': { /* White space is ignored */
token = tkWS;
break;
}
case '/': { /* C-style comments */
if( zSql[1]!='*' ){
token = tkOTHER;
break;
}
zSql += 2;
while( zSql[0] && (zSql[0]!='*' || zSql[1]!='/') ){ zSql++; }
if( zSql[0]==0 ) return 0;
zSql++;
token = tkWS;
break;
}
case '-': { /* SQL-style comments from "--" to end of line */
if( zSql[1]!='-' ){
token = tkOTHER;
break;
}
while( *zSql && *zSql!='\n' ){ zSql++; }
if( *zSql==0 ) return state==0;
token = tkWS;
break;
}
case '[': { /* Microsoft-style identifiers in [...] */
zSql++;
while( *zSql && *zSql!=']' ){ zSql++; }
if( *zSql==0 ) return 0;
token = tkOTHER;
break;
}
case '"': /* single- and double-quoted strings */
case '\'': {
int c = *zSql;
zSql++;
while( *zSql && *zSql!=c ){ zSql++; }
if( *zSql==0 ) return 0;
token = tkOTHER;
break;
}
default: {
if( isIdChar[(u8)*zSql] ){
/* Keywords and unquoted identifiers */
int nId;
for(nId=1; isIdChar[(u8)zSql[nId]]; nId++){}
switch( *zSql ){
case 'c': case 'C': {
if( nId==6 && sqlite3StrNICmp(zSql, "create", 6)==0 ){
token = tkCREATE;
}else{
token = tkOTHER;
}
break;
}
case 't': case 'T': {
if( nId==7 && sqlite3StrNICmp(zSql, "trigger", 7)==0 ){
token = tkTRIGGER;
}else if( nId==4 && sqlite3StrNICmp(zSql, "temp", 4)==0 ){
token = tkTEMP;
}else if( nId==9 && sqlite3StrNICmp(zSql, "temporary", 9)==0 ){
token = tkTEMP;
}else{
token = tkOTHER;
}
break;
}
case 'e': case 'E': {
if( nId==3 && sqlite3StrNICmp(zSql, "end", 3)==0 ){
token = tkEND;
}else if( nId==7 && sqlite3StrNICmp(zSql, "explain", 7)==0 ){
token = tkEXPLAIN;
}else{
token = tkOTHER;
}
break;
}
default: {
token = tkOTHER;
break;
}
}
zSql += nId-1;
}else{
/* Operators and special symbols */
token = tkOTHER;
}
break;
}
}
state = trans[state][token];
zSql++;
}
return state==0;
}
/*
** Return TRUE if the given SQL string ends in a semicolon.
**
** Special handling is require for CREATE TRIGGER statements.
** Whenever the CREATE TRIGGER keywords are seen, the statement
** must end with ";END;".
**
** This implementation uses a state machine with 7 states:
**
** (0) START At the beginning or end of an SQL statement. This routine
** returns 1 if it ends in the START state and 0 if it ends
** in any other state.
**
** (1) NORMAL We are in the middle of statement which ends with a single
** semicolon.
**
** (2) EXPLAIN The keyword EXPLAIN has been seen at the beginning of
** a statement.
**
** (3) CREATE The keyword CREATE has been seen at the beginning of a
** statement, possibly preceeded by EXPLAIN and/or followed by
** TEMP or TEMPORARY
**
** (4) TRIGGER We are in the middle of a trigger definition that must be
** ended by a semicolon, the keyword END, and another semicolon.
**
** (5) SEMI We've seen the first semicolon in the ";END;" that occurs at
** the end of a trigger definition.
**
** (6) END We've seen the ";END" of the ";END;" that occurs at the end
** of a trigger difinition.
**
** Transitions between states above are determined by tokens extracted
** from the input. The following tokens are significant:
**
** (0) tkSEMI A semicolon.
** (1) tkWS Whitespace
** (2) tkOTHER Any other SQL token.
** (3) tkEXPLAIN The "explain" keyword.
** (4) tkCREATE The "create" keyword.
** (5) tkTEMP The "temp" or "temporary" keyword.
** (6) tkTRIGGER The "trigger" keyword.
** (7) tkEND The "end" keyword.
**
** Whitespace never causes a state transition and is always ignored.
**
** If we compile with SQLITE_OMIT_TRIGGER, all of the computation needed
** to recognize the end of a trigger can be omitted. All we have to do
** is look for a semicolon that is not part of an string or comment.
*/
int sqlite3_complete(const char *zSql){
u8 state = 0; /* Current state, using numbers defined in header comment */
u8 token; /* Value of the next token */
#ifndef SQLITE_OMIT_TRIGGER
/* A complex statement machine used to detect the end of a CREATE TRIGGER
** statement. This is the normal case.
*/
static const u8 trans[7][8] = {
/* Token: */
/* State: ** SEMI WS OTHER EXPLAIN CREATE TEMP TRIGGER END */
/* 0 START: */ { 0, 0, 1, 2, 3, 1, 1, 1, },
/* 1 NORMAL: */ { 0, 1, 1, 1, 1, 1, 1, 1, },
/* 2 EXPLAIN: */ { 0, 2, 1, 1, 3, 1, 1, 1, },
/* 3 CREATE: */ { 0, 3, 1, 1, 1, 3, 4, 1, },
/* 4 TRIGGER: */ { 5, 4, 4, 4, 4, 4, 4, 4, },
/* 5 SEMI: */ { 5, 5, 4, 4, 4, 4, 4, 6, },
/* 6 END: */ { 0, 6, 4, 4, 4, 4, 4, 4, },
};
#else
/* If triggers are not suppored by this compile then the statement machine
** used to detect the end of a statement is much simplier
*/
static const u8 trans[2][3] = {
/* Token: */
/* State: ** SEMI WS OTHER */
/* 0 START: */ { 0, 0, 1, },
/* 1 NORMAL: */ { 0, 1, 1, },
};
#endif /* SQLITE_OMIT_TRIGGER */
while( *zSql ){
switch( *zSql ){
case ';': { /* A semicolon */
token = tkSEMI;
break;
}
case ' ':
case '\r':
case '\t':
case '\n':
case '\f': { /* White space is ignored */
token = tkWS;
break;
}
case '/': { /* C-style comments */
if( zSql[1]!='*' ){
token = tkOTHER;
break;
}
zSql += 2;
while( zSql[0] && (zSql[0]!='*' || zSql[1]!='/') ){ zSql++; }
if( zSql[0]==0 ) return 0;
zSql++;
token = tkWS;
break;
}
case '-': { /* SQL-style comments from "--" to end of line */
if( zSql[1]!='-' ){
token = tkOTHER;
break;
}
while( *zSql && *zSql!='\n' ){ zSql++; }
if( *zSql==0 ) return state==0;
token = tkWS;
break;
}
case '[': { /* Microsoft-style identifiers in [...] */
zSql++;
while( *zSql && *zSql!=']' ){ zSql++; }
if( *zSql==0 ) return 0;
token = tkOTHER;
break;
}
case '"': /* single- and double-quoted strings */
case '\'': {
int c = *zSql;
zSql++;
while( *zSql && *zSql!=c ){ zSql++; }
if( *zSql==0 ) return 0;
token = tkOTHER;
break;
}
default: {
int c;
if( IdChar((u8)*zSql) ){
/* Keywords and unquoted identifiers */
int nId;
for(nId=1; IdChar(zSql[nId]); nId++){}
#ifdef SQLITE_OMIT_TRIGGER
token = tkOTHER;
#else
switch( *zSql ){
case 'c': case 'C': {
if( nId==6 && sqlite3StrNICmp(zSql, "create", 6)==0 ){
token = tkCREATE;
}else{
token = tkOTHER;
}
break;
}
case 't': case 'T': {
if( nId==7 && sqlite3StrNICmp(zSql, "trigger", 7)==0 ){
token = tkTRIGGER;
}else if( nId==4 && sqlite3StrNICmp(zSql, "temp", 4)==0 ){
token = tkTEMP;
}else if( nId==9 && sqlite3StrNICmp(zSql, "temporary", 9)==0 ){
token = tkTEMP;
}else{
token = tkOTHER;
}
break;
}
case 'e': case 'E': {
if( nId==3 && sqlite3StrNICmp(zSql, "end", 3)==0 ){
token = tkEND;
}else
#ifndef SQLITE_OMIT_EXPLAIN
if( nId==7 && sqlite3StrNICmp(zSql, "explain", 7)==0 ){
token = tkEXPLAIN;
}else
#endif
{
token = tkOTHER;
}
break;
}
default: {
token = tkOTHER;
break;
}
}
#endif /* SQLITE_OMIT_TRIGGER */
zSql += nId-1;
}else{
/* Operators and special symbols */
token = tkOTHER;
}
break;
}
}
state = trans[state][token];
zSql++;
}
return state==0;
}
/*
** Process a pragma statement.
**
** Pragmas are of this form:
**
** PRAGMA [database.]id [= value]
**
** The identifier might also be a string. The value is a string, and
** identifier, or a number. If minusFlag is true, then the value is
** a number that was preceded by a minus sign.
**
** If the left side is "database.id" then pId1 is the database name
** and pId2 is the id. If the left side is just "id" then pId1 is the
** id and pId2 is any empty string.
*/
void sqlite3Pragma(
Parse *pParse,
Token *pId1, /* First part of [database.]id field */
Token *pId2, /* Second part of [database.]id field, or NULL */
Token *pValue, /* Token for <value>, or NULL */
int minusFlag /* True if a '-' sign preceded <value> */
){
char *zLeft = 0; /* Nul-terminated UTF-8 string <id> */
char *zRight = 0; /* Nul-terminated UTF-8 string <value>, or NULL */
const char *zDb = 0; /* The database name */
Token *pId; /* Pointer to <id> token */
int iDb; /* Database index for <database> */
sqlite3 *db = pParse->db;
Db *pDb;
Vdbe *v = sqlite3GetVdbe(pParse);
if( v==0 ) return;
/* Interpret the [database.] part of the pragma statement. iDb is the
** index of the database this pragma is being applied to in db.aDb[]. */
iDb = sqlite3TwoPartName(pParse, pId1, pId2, &pId);
if( iDb<0 ) return;
pDb = &db->aDb[iDb];
/* If the temp database has been explicitly named as part of the
** pragma, make sure it is open.
*/
if( iDb==1 && sqlite3OpenTempDatabase(pParse) ){
return;
}
zLeft = sqlite3NameFromToken(db, pId);
if( !zLeft ) return;
if( minusFlag ){
zRight = sqlite3MPrintf(db, "-%T", pValue);
}else{
zRight = sqlite3NameFromToken(db, pValue);
}
zDb = ((iDb>0)?pDb->zName:0);
if( sqlite3AuthCheck(pParse, SQLITE_PRAGMA, zLeft, zRight, zDb) ){
goto pragma_out;
}
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
/*
** PRAGMA [database.]default_cache_size
** PRAGMA [database.]default_cache_size=N
**
** The first form reports the current persistent setting for the
** page cache size. The value returned is the maximum number of
** pages in the page cache. The second form sets both the current
** page cache size value and the persistent page cache size value
** stored in the database file.
**
** The default cache size is stored in meta-value 2 of page 1 of the
** database file. The cache size is actually the absolute value of
** this memory location. The sign of meta-value 2 determines the
** synchronous setting. A negative value means synchronous is off
** and a positive value means synchronous is on.
*/
if( sqlite3StrICmp(zLeft,"default_cache_size")==0 ){
static const VdbeOpList getCacheSize[] = {
{ OP_ReadCookie, 0, 2, 0}, /* 0 */
{ OP_AbsValue, 0, 0, 0},
{ OP_Dup, 0, 0, 0},
{ OP_Integer, 0, 0, 0},
{ OP_Ne, 0, 6, 0},
{ OP_Integer, 0, 0, 0}, /* 5 */
{ OP_Callback, 1, 0, 0},
};
int addr;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeUsesBtree(v, iDb);
if( !zRight ){
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cache_size", P3_STATIC);
addr = sqlite3VdbeAddOpList(v, ArraySize(getCacheSize), getCacheSize);
sqlite3VdbeChangeP1(v, addr, iDb);
sqlite3VdbeChangeP1(v, addr+5, SQLITE_DEFAULT_CACHE_SIZE);
}else{
int size = atoi(zRight);
if( size<0 ) size = -size;
sqlite3BeginWriteOperation(pParse, 0, iDb);
sqlite3VdbeAddOp(v, OP_Integer, size, 0);
sqlite3VdbeAddOp(v, OP_ReadCookie, iDb, 2);
addr = sqlite3VdbeAddOp(v, OP_Integer, 0, 0);
sqlite3VdbeAddOp(v, OP_Ge, 0, addr+3);
sqlite3VdbeAddOp(v, OP_Negative, 0, 0);
sqlite3VdbeAddOp(v, OP_SetCookie, iDb, 2);
pDb->pSchema->cache_size = size;
sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
}
}else
/*
** PRAGMA [database.]page_size
** PRAGMA [database.]page_size=N
**
** The first form reports the current setting for the
** database page size in bytes. The second form sets the
** database page size value. The value can only be set if
** the database has not yet been created.
*/
if( sqlite3StrICmp(zLeft,"page_size")==0 ){
Btree *pBt = pDb->pBt;
if( !zRight ){
int size = pBt ? sqlite3BtreeGetPageSize(pBt) : 0;
returnSingleInt(pParse, "page_size", size);
}else{
/* Malloc may fail when setting the page-size, as there is an internal
** buffer that the pager module resizes using sqlite3_realloc().
*/
if( SQLITE_NOMEM==sqlite3BtreeSetPageSize(pBt, atoi(zRight), -1) ){
db->mallocFailed = 1;
}
}
}else
/*
** PRAGMA [database.]max_page_count
** PRAGMA [database.]max_page_count=N
**
** The first form reports the current setting for the
** maximum number of pages in the database file. The
** second form attempts to change this setting. Both
** forms return the current setting.
*/
if( sqlite3StrICmp(zLeft,"max_page_count")==0 ){
Btree *pBt = pDb->pBt;
int newMax = 0;
if( zRight ){
newMax = atoi(zRight);
}
if( pBt ){
newMax = sqlite3BtreeMaxPageCount(pBt, newMax);
}
returnSingleInt(pParse, "max_page_count", newMax);
}else
/*
** PRAGMA [database.]locking_mode
** PRAGMA [database.]locking_mode = (normal|exclusive)
*/
if( sqlite3StrICmp(zLeft,"locking_mode")==0 ){
const char *zRet = "normal";
int eMode = getLockingMode(zRight);
if( pId2->n==0 && eMode==PAGER_LOCKINGMODE_QUERY ){
/* Simple "PRAGMA locking_mode;" statement. This is a query for
** the current default locking mode (which may be different to
** the locking-mode of the main database).
*/
eMode = db->dfltLockMode;
}else{
Pager *pPager;
if( pId2->n==0 ){
/* This indicates that no database name was specified as part
** of the PRAGMA command. In this case the locking-mode must be
** set on all attached databases, as well as the main db file.
**
** Also, the sqlite3.dfltLockMode variable is set so that
** any subsequently attached databases also use the specified
** locking mode.
*/
int ii;
assert(pDb==&db->aDb[0]);
for(ii=2; ii<db->nDb; ii++){
pPager = sqlite3BtreePager(db->aDb[ii].pBt);
sqlite3PagerLockingMode(pPager, eMode);
}
db->dfltLockMode = eMode;
}
pPager = sqlite3BtreePager(pDb->pBt);
eMode = sqlite3PagerLockingMode(pPager, eMode);
}
assert(eMode==PAGER_LOCKINGMODE_NORMAL||eMode==PAGER_LOCKINGMODE_EXCLUSIVE);
if( eMode==PAGER_LOCKINGMODE_EXCLUSIVE ){
zRet = "exclusive";
}
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "locking_mode", P3_STATIC);
sqlite3VdbeOp3(v, OP_String8, 0, 0, zRet, 0);
sqlite3VdbeAddOp(v, OP_Callback, 1, 0);
}else
#endif /* SQLITE_OMIT_PAGER_PRAGMAS */
/*
** PRAGMA [database.]auto_vacuum
** PRAGMA [database.]auto_vacuum=N
**
** Get or set the (boolean) value of the database 'auto-vacuum' parameter.
*/
#ifndef SQLITE_OMIT_AUTOVACUUM
if( sqlite3StrICmp(zLeft,"auto_vacuum")==0 ){
Btree *pBt = pDb->pBt;
if( sqlite3ReadSchema(pParse) ){
goto pragma_out;
}
if( !zRight ){
int auto_vacuum =
pBt ? sqlite3BtreeGetAutoVacuum(pBt) : SQLITE_DEFAULT_AUTOVACUUM;
returnSingleInt(pParse, "auto_vacuum", auto_vacuum);
}else{
int eAuto = getAutoVacuum(zRight);
if( eAuto>=0 ){
/* Call SetAutoVacuum() to set initialize the internal auto and
** incr-vacuum flags. This is required in case this connection
** creates the database file. It is important that it is created
** as an auto-vacuum capable db.
*/
int rc = sqlite3BtreeSetAutoVacuum(pBt, eAuto);
if( rc==SQLITE_OK && (eAuto==1 || eAuto==2) ){
/* When setting the auto_vacuum mode to either "full" or
** "incremental", write the value of meta[6] in the database
** file. Before writing to meta[6], check that meta[3] indicates
** that this really is an auto-vacuum capable database.
*/
static const VdbeOpList setMeta6[] = {
{ OP_Transaction, 0, 1, 0}, /* 0 */
{ OP_ReadCookie, 0, 3, 0}, /* 1 */
{ OP_If, 0, 0, 0}, /* 2 */
{ OP_Halt, SQLITE_OK, OE_Abort, 0}, /* 3 */
{ OP_Integer, 0, 0, 0}, /* 4 */
{ OP_SetCookie, 0, 6, 0}, /* 5 */
};
int iAddr;
iAddr = sqlite3VdbeAddOpList(v, ArraySize(setMeta6), setMeta6);
sqlite3VdbeChangeP1(v, iAddr, iDb);
sqlite3VdbeChangeP1(v, iAddr+1, iDb);
sqlite3VdbeChangeP2(v, iAddr+2, iAddr+4);
sqlite3VdbeChangeP1(v, iAddr+4, eAuto-1);
sqlite3VdbeChangeP1(v, iAddr+5, iDb);
sqlite3VdbeUsesBtree(v, iDb);
}
}
}
}else
#endif
/*
** PRAGMA [database.]incremental_vacuum(N)
**
** Do N steps of incremental vacuuming on a database.
*/
#ifndef SQLITE_OMIT_AUTOVACUUM
if( sqlite3StrICmp(zLeft,"incremental_vacuum")==0 ){
int iLimit, addr;
if( sqlite3ReadSchema(pParse) ){
goto pragma_out;
}
if( zRight==0 || !sqlite3GetInt32(zRight, &iLimit) || iLimit<=0 ){
iLimit = 0x7fffffff;
}
sqlite3BeginWriteOperation(pParse, 0, iDb);
sqlite3VdbeAddOp(v, OP_MemInt, iLimit, 0);
addr = sqlite3VdbeAddOp(v, OP_IncrVacuum, iDb, 0);
sqlite3VdbeAddOp(v, OP_Callback, 0, 0);
sqlite3VdbeAddOp(v, OP_MemIncr, -1, 0);
sqlite3VdbeAddOp(v, OP_IfMemPos, 0, addr);
sqlite3VdbeJumpHere(v, addr);
}else
#endif
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
/*
** PRAGMA [database.]cache_size
** PRAGMA [database.]cache_size=N
**
** The first form reports the current local setting for the
** page cache size. The local setting can be different from
** the persistent cache size value that is stored in the database
** file itself. The value returned is the maximum number of
** pages in the page cache. The second form sets the local
** page cache size value. It does not change the persistent
** cache size stored on the disk so the cache size will revert
** to its default value when the database is closed and reopened.
** N should be a positive integer.
*/
if( sqlite3StrICmp(zLeft,"cache_size")==0 ){
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
if( !zRight ){
returnSingleInt(pParse, "cache_size", pDb->pSchema->cache_size);
}else{
int size = atoi(zRight);
if( size<0 ) size = -size;
pDb->pSchema->cache_size = size;
sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
}
}else
/*
** PRAGMA temp_store
** PRAGMA temp_store = "default"|"memory"|"file"
**
** Return or set the local value of the temp_store flag. Changing
** the local value does not make changes to the disk file and the default
** value will be restored the next time the database is opened.
**
** Note that it is possible for the library compile-time options to
** override this setting
*/
if( sqlite3StrICmp(zLeft, "temp_store")==0 ){
if( !zRight ){
returnSingleInt(pParse, "temp_store", db->temp_store);
}else{
changeTempStorage(pParse, zRight);
}
}else
/*
** PRAGMA temp_store_directory
** PRAGMA temp_store_directory = ""|"directory_name"
**
** Return or set the local value of the temp_store_directory flag. Changing
** the value sets a specific directory to be used for temporary files.
** Setting to a null string reverts to the default temporary directory search.
** If temporary directory is changed, then invalidateTempStorage.
**
*/
if( sqlite3StrICmp(zLeft, "temp_store_directory")==0 ){
if( !zRight ){
if( sqlite3_temp_directory ){
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME,
"temp_store_directory", P3_STATIC);
sqlite3VdbeOp3(v, OP_String8, 0, 0, sqlite3_temp_directory, 0);
sqlite3VdbeAddOp(v, OP_Callback, 1, 0);
}
}else{
if( zRight[0]
&& !sqlite3OsAccess(db->pVfs, zRight, SQLITE_ACCESS_READWRITE)
){
sqlite3ErrorMsg(pParse, "not a writable directory");
goto pragma_out;
}
if( TEMP_STORE==0
|| (TEMP_STORE==1 && db->temp_store<=1)
|| (TEMP_STORE==2 && db->temp_store==1)
){
invalidateTempStorage(pParse);
}
sqlite3_free(sqlite3_temp_directory);
if( zRight[0] ){
sqlite3_temp_directory = zRight;
zRight = 0;
}else{
sqlite3_temp_directory = 0;
}
}
}else
/*
** PRAGMA [database.]synchronous
** PRAGMA [database.]synchronous=OFF|ON|NORMAL|FULL
**
** Return or set the local value of the synchronous flag. Changing
** the local value does not make changes to the disk file and the
** default value will be restored the next time the database is
** opened.
*/
if( sqlite3StrICmp(zLeft,"synchronous")==0 ){
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
if( !zRight ){
returnSingleInt(pParse, "synchronous", pDb->safety_level-1);
}else{
if( !db->autoCommit ){
sqlite3ErrorMsg(pParse,
"Safety level may not be changed inside a transaction");
}else{
pDb->safety_level = getSafetyLevel(zRight)+1;
}
}
}else
#endif /* SQLITE_OMIT_PAGER_PRAGMAS */
#ifndef SQLITE_OMIT_FLAG_PRAGMAS
if( flagPragma(pParse, zLeft, zRight) ){
/* The flagPragma() subroutine also generates any necessary code
** there is nothing more to do here */
}else
#endif /* SQLITE_OMIT_FLAG_PRAGMAS */
#ifndef SQLITE_OMIT_SCHEMA_PRAGMAS
/*
** PRAGMA table_info(<table>)
**
** Return a single row for each column of the named table. The columns of
** the returned data set are:
**
** cid: Column id (numbered from left to right, starting at 0)
** name: Column name
** type: Column declaration type.
** notnull: True if 'NOT NULL' is part of column declaration
** dflt_value: The default value for the column, if any.
*/
if( sqlite3StrICmp(zLeft, "table_info")==0 && zRight ){
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
int i;
int nHidden = 0;
Column *pCol;
sqlite3VdbeSetNumCols(v, 6);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cid", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P3_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "type", P3_STATIC);
sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "notnull", P3_STATIC);
sqlite3VdbeSetColName(v, 4, COLNAME_NAME, "dflt_value", P3_STATIC);
sqlite3VdbeSetColName(v, 5, COLNAME_NAME, "pk", P3_STATIC);
sqlite3ViewGetColumnNames(pParse, pTab);
for(i=0, pCol=pTab->aCol; i<pTab->nCol; i++, pCol++){
const Token *pDflt;
if( IsHiddenColumn(pCol) ){
nHidden++;
continue;
}
sqlite3VdbeAddOp(v, OP_Integer, i-nHidden, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pCol->zName, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0,
pCol->zType ? pCol->zType : "", 0);
sqlite3VdbeAddOp(v, OP_Integer, pCol->notNull, 0);
if( pCol->pDflt && (pDflt = &pCol->pDflt->span)->z ){
sqlite3VdbeOp3(v, OP_String8, 0, 0, (char*)pDflt->z, pDflt->n);
}else{
sqlite3VdbeAddOp(v, OP_Null, 0, 0);
}
sqlite3VdbeAddOp(v, OP_Integer, pCol->isPrimKey, 0);
sqlite3VdbeAddOp(v, OP_Callback, 6, 0);
}
}
}else
if( sqlite3StrICmp(zLeft, "index_info")==0 && zRight ){
Index *pIdx;
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pIdx = sqlite3FindIndex(db, zRight, zDb);
if( pIdx ){
int i;
pTab = pIdx->pTable;
sqlite3VdbeSetNumCols(v, 3);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seqno", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "cid", P3_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "name", P3_STATIC);
for(i=0; i<pIdx->nColumn; i++){
int cnum = pIdx->aiColumn[i];
sqlite3VdbeAddOp(v, OP_Integer, i, 0);
sqlite3VdbeAddOp(v, OP_Integer, cnum, 0);
assert( pTab->nCol>cnum );
sqlite3VdbeOp3(v, OP_String8, 0, 0, pTab->aCol[cnum].zName, 0);
sqlite3VdbeAddOp(v, OP_Callback, 3, 0);
}
}
}else
if( sqlite3StrICmp(zLeft, "index_list")==0 && zRight ){
Index *pIdx;
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
v = sqlite3GetVdbe(pParse);
pIdx = pTab->pIndex;
if( pIdx ){
int i = 0;
sqlite3VdbeSetNumCols(v, 3);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P3_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "unique", P3_STATIC);
while(pIdx){
sqlite3VdbeAddOp(v, OP_Integer, i, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pIdx->zName, 0);
sqlite3VdbeAddOp(v, OP_Integer, pIdx->onError!=OE_None, 0);
sqlite3VdbeAddOp(v, OP_Callback, 3, 0);
++i;
pIdx = pIdx->pNext;
}
}
}
}else
if( sqlite3StrICmp(zLeft, "database_list")==0 ){
int i;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeSetNumCols(v, 3);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P3_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "file", P3_STATIC);
for(i=0; i<db->nDb; i++){
if( db->aDb[i].pBt==0 ) continue;
assert( db->aDb[i].zName!=0 );
sqlite3VdbeAddOp(v, OP_Integer, i, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, db->aDb[i].zName, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0,
sqlite3BtreeGetFilename(db->aDb[i].pBt), 0);
sqlite3VdbeAddOp(v, OP_Callback, 3, 0);
}
}else
if( sqlite3StrICmp(zLeft, "collation_list")==0 ){
int i = 0;
HashElem *p;
sqlite3VdbeSetNumCols(v, 2);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P3_STATIC);
for(p=sqliteHashFirst(&db->aCollSeq); p; p=sqliteHashNext(p)){
CollSeq *pColl = (CollSeq *)sqliteHashData(p);
sqlite3VdbeAddOp(v, OP_Integer, i++, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pColl->zName, 0);
sqlite3VdbeAddOp(v, OP_Callback, 2, 0);
}
}else
#endif /* SQLITE_OMIT_SCHEMA_PRAGMAS */
#ifndef SQLITE_OMIT_FOREIGN_KEY
if( sqlite3StrICmp(zLeft, "foreign_key_list")==0 && zRight ){
FKey *pFK;
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
v = sqlite3GetVdbe(pParse);
pFK = pTab->pFKey;
if( pFK ){
int i = 0;
sqlite3VdbeSetNumCols(v, 5);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "id", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "seq", P3_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "table", P3_STATIC);
sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "from", P3_STATIC);
sqlite3VdbeSetColName(v, 4, COLNAME_NAME, "to", P3_STATIC);
while(pFK){
int j;
for(j=0; j<pFK->nCol; j++){
char *zCol = pFK->aCol[j].zCol;
sqlite3VdbeAddOp(v, OP_Integer, i, 0);
sqlite3VdbeAddOp(v, OP_Integer, j, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pFK->zTo, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0,
pTab->aCol[pFK->aCol[j].iFrom].zName, 0);
sqlite3VdbeOp3(v, zCol ? OP_String8 : OP_Null, 0, 0, zCol, 0);
sqlite3VdbeAddOp(v, OP_Callback, 5, 0);
}
++i;
pFK = pFK->pNextFrom;
}
}
}
}else
#endif /* !defined(SQLITE_OMIT_FOREIGN_KEY) */
#ifndef NDEBUG
if( sqlite3StrICmp(zLeft, "parser_trace")==0 ){
if( zRight ){
if( getBoolean(zRight) ){
sqlite3ParserTrace(stderr, "parser: ");
}else{
sqlite3ParserTrace(0, 0);
}
}
}else
#endif
/* Reinstall the LIKE and GLOB functions. The variant of LIKE
** used will be case sensitive or not depending on the RHS.
*/
if( sqlite3StrICmp(zLeft, "case_sensitive_like")==0 ){
if( zRight ){
sqlite3RegisterLikeFunctions(db, getBoolean(zRight));
}
}else
#ifndef SQLITE_INTEGRITY_CHECK_ERROR_MAX
# define SQLITE_INTEGRITY_CHECK_ERROR_MAX 100
#endif
#ifndef SQLITE_OMIT_INTEGRITY_CHECK
if( sqlite3StrICmp(zLeft, "integrity_check")==0 ){
int i, j, addr, mxErr;
/* Code that appears at the end of the integrity check. If no error
** messages have been generated, output OK. Otherwise output the
** error message
*/
static const VdbeOpList endCode[] = {
{ OP_MemLoad, 0, 0, 0},
{ OP_Integer, 0, 0, 0},
{ OP_Ne, 0, 0, 0}, /* 2 */
{ OP_String8, 0, 0, "ok"},
{ OP_Callback, 1, 0, 0},
};
/* Initialize the VDBE program */
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "integrity_check", P3_STATIC);
/* Set the maximum error count */
mxErr = SQLITE_INTEGRITY_CHECK_ERROR_MAX;
if( zRight ){
mxErr = atoi(zRight);
if( mxErr<=0 ){
mxErr = SQLITE_INTEGRITY_CHECK_ERROR_MAX;
}
}
sqlite3VdbeAddOp(v, OP_MemInt, mxErr, 0);
/* Do an integrity check on each database file */
for(i=0; i<db->nDb; i++){
HashElem *x;
Hash *pTbls;
int cnt = 0;
if( OMIT_TEMPDB && i==1 ) continue;
sqlite3CodeVerifySchema(pParse, i);
addr = sqlite3VdbeAddOp(v, OP_IfMemPos, 0, 0);
sqlite3VdbeAddOp(v, OP_Halt, 0, 0);
sqlite3VdbeJumpHere(v, addr);
/* Do an integrity check of the B-Tree
*/
pTbls = &db->aDb[i].pSchema->tblHash;
for(x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){
Table *pTab = sqliteHashData(x);
Index *pIdx;
sqlite3VdbeAddOp(v, OP_Integer, pTab->tnum, 0);
cnt++;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
sqlite3VdbeAddOp(v, OP_Integer, pIdx->tnum, 0);
cnt++;
}
}
if( cnt==0 ) continue;
sqlite3VdbeAddOp(v, OP_IntegrityCk, 0, i);
addr = sqlite3VdbeAddOp(v, OP_IsNull, -1, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0,
sqlite3MPrintf(db, "*** in database %s ***\n", db->aDb[i].zName),
P3_DYNAMIC);
sqlite3VdbeAddOp(v, OP_Pull, 1, 0);
sqlite3VdbeAddOp(v, OP_Concat, 0, 0);
sqlite3VdbeAddOp(v, OP_Callback, 1, 0);
sqlite3VdbeJumpHere(v, addr);
/* Make sure all the indices are constructed correctly.
*/
for(x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){
Table *pTab = sqliteHashData(x);
Index *pIdx;
int loopTop;
if( pTab->pIndex==0 ) continue;
addr = sqlite3VdbeAddOp(v, OP_IfMemPos, 0, 0);
sqlite3VdbeAddOp(v, OP_Halt, 0, 0);
sqlite3VdbeJumpHere(v, addr);
sqlite3OpenTableAndIndices(pParse, pTab, 1, OP_OpenRead);
sqlite3VdbeAddOp(v, OP_MemInt, 0, 1);
loopTop = sqlite3VdbeAddOp(v, OP_Rewind, 1, 0);
sqlite3VdbeAddOp(v, OP_MemIncr, 1, 1);
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
int jmp2;
static const VdbeOpList idxErr[] = {
{ OP_MemIncr, -1, 0, 0},
{ OP_String8, 0, 0, "rowid "},
{ OP_Rowid, 1, 0, 0},
{ OP_String8, 0, 0, " missing from index "},
{ OP_String8, 0, 0, 0}, /* 4 */
{ OP_Concat, 2, 0, 0},
{ OP_Callback, 1, 0, 0},
};
sqlite3GenerateIndexKey(v, pIdx, 1);
jmp2 = sqlite3VdbeAddOp(v, OP_Found, j+2, 0);
addr = sqlite3VdbeAddOpList(v, ArraySize(idxErr), idxErr);
sqlite3VdbeChangeP3(v, addr+4, pIdx->zName, P3_STATIC);
sqlite3VdbeJumpHere(v, jmp2);
}
sqlite3VdbeAddOp(v, OP_Next, 1, loopTop+1);
sqlite3VdbeJumpHere(v, loopTop);
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
static const VdbeOpList cntIdx[] = {
{ OP_MemInt, 0, 2, 0},
{ OP_Rewind, 0, 0, 0}, /* 1 */
{ OP_MemIncr, 1, 2, 0},
{ OP_Next, 0, 0, 0}, /* 3 */
{ OP_MemLoad, 1, 0, 0},
{ OP_MemLoad, 2, 0, 0},
{ OP_Eq, 0, 0, 0}, /* 6 */
{ OP_MemIncr, -1, 0, 0},
{ OP_String8, 0, 0, "wrong # of entries in index "},
{ OP_String8, 0, 0, 0}, /* 9 */
{ OP_Concat, 0, 0, 0},
{ OP_Callback, 1, 0, 0},
};
if( pIdx->tnum==0 ) continue;
addr = sqlite3VdbeAddOp(v, OP_IfMemPos, 0, 0);
sqlite3VdbeAddOp(v, OP_Halt, 0, 0);
sqlite3VdbeJumpHere(v, addr);
addr = sqlite3VdbeAddOpList(v, ArraySize(cntIdx), cntIdx);
sqlite3VdbeChangeP1(v, addr+1, j+2);
sqlite3VdbeChangeP2(v, addr+1, addr+4);
sqlite3VdbeChangeP1(v, addr+3, j+2);
sqlite3VdbeChangeP2(v, addr+3, addr+2);
sqlite3VdbeJumpHere(v, addr+6);
sqlite3VdbeChangeP3(v, addr+9, pIdx->zName, P3_STATIC);
}
}
}
addr = sqlite3VdbeAddOpList(v, ArraySize(endCode), endCode);
sqlite3VdbeChangeP1(v, addr+1, mxErr);
sqlite3VdbeJumpHere(v, addr+2);
}else
#endif /* SQLITE_OMIT_INTEGRITY_CHECK */
#ifndef SQLITE_OMIT_UTF16
/*
** PRAGMA encoding
** PRAGMA encoding = "utf-8"|"utf-16"|"utf-16le"|"utf-16be"
**
** In it's first form, this pragma returns the encoding of the main
** database. If the database is not initialized, it is initialized now.
**
** The second form of this pragma is a no-op if the main database file
** has not already been initialized. In this case it sets the default
** encoding that will be used for the main database file if a new file
** is created. If an existing main database file is opened, then the
** default text encoding for the existing database is used.
**
** In all cases new databases created using the ATTACH command are
** created to use the same default text encoding as the main database. If
** the main database has not been initialized and/or created when ATTACH
** is executed, this is done before the ATTACH operation.
**
** In the second form this pragma sets the text encoding to be used in
** new database files created using this database handle. It is only
** useful if invoked immediately after the main database i
*/
if( sqlite3StrICmp(zLeft, "encoding")==0 ){
static const struct EncName {
char *zName;
u8 enc;
} encnames[] = {
{ "UTF-8", SQLITE_UTF8 },
{ "UTF8", SQLITE_UTF8 },
{ "UTF-16le", SQLITE_UTF16LE },
{ "UTF16le", SQLITE_UTF16LE },
{ "UTF-16be", SQLITE_UTF16BE },
{ "UTF16be", SQLITE_UTF16BE },
{ "UTF-16", 0 }, /* SQLITE_UTF16NATIVE */
{ "UTF16", 0 }, /* SQLITE_UTF16NATIVE */
{ 0, 0 }
};
const struct EncName *pEnc;
if( !zRight ){ /* "PRAGMA encoding" */
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "encoding", P3_STATIC);
sqlite3VdbeAddOp(v, OP_String8, 0, 0);
for(pEnc=&encnames[0]; pEnc->zName; pEnc++){
if( pEnc->enc==ENC(pParse->db) ){
sqlite3VdbeChangeP3(v, -1, pEnc->zName, P3_STATIC);
break;
}
}
sqlite3VdbeAddOp(v, OP_Callback, 1, 0);
}else{ /* "PRAGMA encoding = XXX" */
/* Only change the value of sqlite.enc if the database handle is not
** initialized. If the main database exists, the new sqlite.enc value
** will be overwritten when the schema is next loaded. If it does not
** already exists, it will be created to use the new encoding value.
*/
if(
!(DbHasProperty(db, 0, DB_SchemaLoaded)) ||
DbHasProperty(db, 0, DB_Empty)
){
for(pEnc=&encnames[0]; pEnc->zName; pEnc++){
if( 0==sqlite3StrICmp(zRight, pEnc->zName) ){
ENC(pParse->db) = pEnc->enc ? pEnc->enc : SQLITE_UTF16NATIVE;
break;
}
}
if( !pEnc->zName ){
sqlite3ErrorMsg(pParse, "unsupported encoding: %s", zRight);
}
}
}
}else
#endif /* SQLITE_OMIT_UTF16 */
#ifndef SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS
/*
** PRAGMA [database.]schema_version
** PRAGMA [database.]schema_version = <integer>
**
** PRAGMA [database.]user_version
** PRAGMA [database.]user_version = <integer>
**
** The pragma's schema_version and user_version are used to set or get
** the value of the schema-version and user-version, respectively. Both
** the schema-version and the user-version are 32-bit signed integers
** stored in the database header.
**
** The schema-cookie is usually only manipulated internally by SQLite. It
** is incremented by SQLite whenever the database schema is modified (by
** creating or dropping a table or index). The schema version is used by
** SQLite each time a query is executed to ensure that the internal cache
** of the schema used when compiling the SQL query matches the schema of
** the database against which the compiled query is actually executed.
** Subverting this mechanism by using "PRAGMA schema_version" to modify
** the schema-version is potentially dangerous and may lead to program
** crashes or database corruption. Use with caution!
**
** The user-version is not used internally by SQLite. It may be used by
** applications for any purpose.
*/
if( sqlite3StrICmp(zLeft, "schema_version")==0
|| sqlite3StrICmp(zLeft, "user_version")==0
|| sqlite3StrICmp(zLeft, "freelist_count")==0
){
int iCookie; /* Cookie index. 0 for schema-cookie, 6 for user-cookie. */
sqlite3VdbeUsesBtree(v, iDb);
switch( zLeft[0] ){
case 's': case 'S':
iCookie = 0;
break;
case 'f': case 'F':
iCookie = 1;
iDb = (-1*(iDb+1));
assert(iDb<=0);
break;
default:
iCookie = 5;
break;
}
if( zRight && iDb>=0 ){
/* Write the specified cookie value */
static const VdbeOpList setCookie[] = {
{ OP_Transaction, 0, 1, 0}, /* 0 */
{ OP_Integer, 0, 0, 0}, /* 1 */
{ OP_SetCookie, 0, 0, 0}, /* 2 */
};
int addr = sqlite3VdbeAddOpList(v, ArraySize(setCookie), setCookie);
sqlite3VdbeChangeP1(v, addr, iDb);
sqlite3VdbeChangeP1(v, addr+1, atoi(zRight));
sqlite3VdbeChangeP1(v, addr+2, iDb);
sqlite3VdbeChangeP2(v, addr+2, iCookie);
}else{
/* Read the specified cookie value */
static const VdbeOpList readCookie[] = {
{ OP_ReadCookie, 0, 0, 0}, /* 0 */
{ OP_Callback, 1, 0, 0}
};
int addr = sqlite3VdbeAddOpList(v, ArraySize(readCookie), readCookie);
sqlite3VdbeChangeP1(v, addr, iDb);
sqlite3VdbeChangeP2(v, addr, iCookie);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, zLeft, P3_TRANSIENT);
}
}else
#endif /* SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS */
#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
/*
** Report the current state of file logs for all databases
*/
if( sqlite3StrICmp(zLeft, "lock_status")==0 ){
static const char *const azLockName[] = {
"unlocked", "shared", "reserved", "pending", "exclusive"
};
int i;
Vdbe *v = sqlite3GetVdbe(pParse);
sqlite3VdbeSetNumCols(v, 2);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "database", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "status", P3_STATIC);
for(i=0; i<db->nDb; i++){
Btree *pBt;
Pager *pPager;
const char *zState = "unknown";
int j;
if( db->aDb[i].zName==0 ) continue;
sqlite3VdbeOp3(v, OP_String8, 0, 0, db->aDb[i].zName, P3_STATIC);
pBt = db->aDb[i].pBt;
if( pBt==0 || (pPager = sqlite3BtreePager(pBt))==0 ){
zState = "closed";
}else if( sqlite3_file_control(db, db->aDb[i].zName,
SQLITE_FCNTL_LOCKSTATE, &j)==SQLITE_OK ){
zState = azLockName[j];
}
sqlite3VdbeOp3(v, OP_String8, 0, 0, zState, P3_STATIC);
sqlite3VdbeAddOp(v, OP_Callback, 2, 0);
}
}else
#endif
#ifdef SQLITE_SSE
/*
** Check to see if the sqlite_statements table exists. Create it
** if it does not.
*/
if( sqlite3StrICmp(zLeft, "create_sqlite_statement_table")==0 ){
extern int sqlite3CreateStatementsTable(Parse*);
sqlite3CreateStatementsTable(pParse);
}else
#endif
#if SQLITE_HAS_CODEC
if( sqlite3StrICmp(zLeft, "key")==0 ){
sqlite3_key(db, zRight, strlen(zRight));
}else
#endif
#if SQLITE_HAS_CODEC || defined(SQLITE_ENABLE_CEROD)
if( sqlite3StrICmp(zLeft, "activate_extensions")==0 ){
#if SQLITE_HAS_CODEC
if( sqlite3StrNICmp(zRight, "see-", 4)==0 ){
extern void sqlite3_activate_see(const char*);
sqlite3_activate_see(&zRight[4]);
}
#endif
#ifdef SQLITE_ENABLE_CEROD
if( sqlite3StrNICmp(zRight, "cerod-", 6)==0 ){
extern void sqlite3_activate_cerod(const char*);
sqlite3_activate_cerod(&zRight[6]);
}
#endif
}
#endif
{}
if( v ){
/* Code an OP_Expire at the end of each PRAGMA program to cause
** the VDBE implementing the pragma to expire. Most (all?) pragmas
** are only valid for a single execution.
*/
sqlite3VdbeAddOp(v, OP_Expire, 1, 0);
/*
** Reset the safety level, in case the fullfsync flag or synchronous
** setting changed.
*/
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
if( db->autoCommit ){
sqlite3BtreeSetSafetyLevel(pDb->pBt, pDb->safety_level,
(db->flags&SQLITE_FullFSync)!=0);
}
#endif
}
pragma_out:
sqlite3_free(zLeft);
sqlite3_free(zRight);
}
/*
** This is called by the parser when it sees a CREATE TRIGGER statement
** up to the point of the BEGIN before the trigger actions. A Trigger
** structure is generated based on the information available and stored
** in pParse->pNewTrigger. After the trigger actions have been parsed, the
** sqlite3FinishTrigger() function is called to complete the trigger
** construction process.
*/
SQLITE_PRIVATE void sqlite3BeginTrigger(
Parse *pParse, /* The parse context of the CREATE TRIGGER statement */
Token *pName1, /* The name of the trigger */
Token *pName2, /* The name of the trigger */
int tr_tm, /* One of TK_BEFORE, TK_AFTER, TK_INSTEAD */
int op, /* One of TK_INSERT, TK_UPDATE, TK_DELETE */
IdList *pColumns, /* column list if this is an UPDATE OF trigger */
SrcList *pTableName,/* The name of the table/view the trigger applies to */
Expr *pWhen, /* WHEN clause */
int isTemp, /* True if the TEMPORARY keyword is present */
int noErr /* Suppress errors if the trigger already exists */
){
Trigger *pTrigger = 0; /* The new trigger */
Table *pTab; /* Table that the trigger fires off of */
char *zName = 0; /* Name of the trigger */
sqlite3 *db = pParse->db; /* The database connection */
int iDb; /* The database to store the trigger in */
Token *pName; /* The unqualified db name */
DbFixer sFix; /* State vector for the DB fixer */
int iTabDb; /* Index of the database holding pTab */
assert( pName1!=0 ); /* pName1->z might be NULL, but not pName1 itself */
assert( pName2!=0 );
assert( op==TK_INSERT || op==TK_UPDATE || op==TK_DELETE );
assert( op>0 && op<0xff );
if( isTemp ){
/* If TEMP was specified, then the trigger name may not be qualified. */
if( pName2->n>0 ){
sqlite3ErrorMsg(pParse, "temporary trigger may not have qualified name");
goto trigger_cleanup;
}
iDb = 1;
pName = pName1;
}else{
/* Figure out the db that the trigger will be created in */
iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pName);
if( iDb<0 ){
goto trigger_cleanup;
}
}
if( !pTableName || db->mallocFailed ){
goto trigger_cleanup;
}
/* A long-standing parser bug is that this syntax was allowed:
**
** CREATE TRIGGER attached.demo AFTER INSERT ON attached.tab ....
** ^^^^^^^^
**
** To maintain backwards compatibility, ignore the database
** name on pTableName if we are reparsing our of SQLITE_MASTER.
*/
if( db->init.busy && iDb!=1 ){
sqlite3DbFree(db, pTableName->a[0].zDatabase);
pTableName->a[0].zDatabase = 0;
}
/* If the trigger name was unqualified, and the table is a temp table,
** then set iDb to 1 to create the trigger in the temporary database.
** If sqlite3SrcListLookup() returns 0, indicating the table does not
** exist, the error is caught by the block below.
*/
pTab = sqlite3SrcListLookup(pParse, pTableName);
if( db->init.busy==0 && pName2->n==0 && pTab
&& pTab->pSchema==db->aDb[1].pSchema ){
iDb = 1;
}
/* Ensure the table name matches database name and that the table exists */
if( db->mallocFailed ) goto trigger_cleanup;
assert( pTableName->nSrc==1 );
sqlite3FixInit(&sFix, pParse, iDb, "trigger", pName);
if( sqlite3FixSrcList(&sFix, pTableName) ){
goto trigger_cleanup;
}
pTab = sqlite3SrcListLookup(pParse, pTableName);
if( !pTab ){
/* The table does not exist. */
if( db->init.iDb==1 ){
/* Ticket #3810.
** Normally, whenever a table is dropped, all associated triggers are
** dropped too. But if a TEMP trigger is created on a non-TEMP table
** and the table is dropped by a different database connection, the
** trigger is not visible to the database connection that does the
** drop so the trigger cannot be dropped. This results in an
** "orphaned trigger" - a trigger whose associated table is missing.
*/
db->init.orphanTrigger = 1;
}
goto trigger_cleanup;
}
if( IsVirtual(pTab) ){
sqlite3ErrorMsg(pParse, "cannot create triggers on virtual tables");
goto trigger_cleanup;
}
/* Check that the trigger name is not reserved and that no trigger of the
** specified name exists */
zName = sqlite3NameFromToken(db, pName);
if( !zName || SQLITE_OK!=sqlite3CheckObjectName(pParse, zName) ){
goto trigger_cleanup;
}
assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
if( sqlite3HashFind(&(db->aDb[iDb].pSchema->trigHash),
zName, sqlite3Strlen30(zName)) ){
if( !noErr ){
sqlite3ErrorMsg(pParse, "trigger %T already exists", pName);
}else{
assert( !db->init.busy );
sqlite3CodeVerifySchema(pParse, iDb);
}
goto trigger_cleanup;
}
/* Do not create a trigger on a system table */
if( sqlite3StrNICmp(pTab->zName, "sqlite_", 7)==0 ){
sqlite3ErrorMsg(pParse, "cannot create trigger on system table");
pParse->nErr++;
goto trigger_cleanup;
}
/* INSTEAD of triggers are only for views and views only support INSTEAD
** of triggers.
*/
if( pTab->pSelect && tr_tm!=TK_INSTEAD ){
sqlite3ErrorMsg(pParse, "cannot create %s trigger on view: %S",
(tr_tm == TK_BEFORE)?"BEFORE":"AFTER", pTableName, 0);
goto trigger_cleanup;
}
if( !pTab->pSelect && tr_tm==TK_INSTEAD ){
sqlite3ErrorMsg(pParse, "cannot create INSTEAD OF"
" trigger on table: %S", pTableName, 0);
goto trigger_cleanup;
}
iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema);
#ifndef SQLITE_OMIT_AUTHORIZATION
{
int code = SQLITE_CREATE_TRIGGER;
const char *zDb = db->aDb[iTabDb].zName;
const char *zDbTrig = isTemp ? db->aDb[1].zName : zDb;
if( iTabDb==1 || isTemp ) code = SQLITE_CREATE_TEMP_TRIGGER;
if( sqlite3AuthCheck(pParse, code, zName, pTab->zName, zDbTrig) ){
goto trigger_cleanup;
}
if( sqlite3AuthCheck(pParse, SQLITE_INSERT, SCHEMA_TABLE(iTabDb),0,zDb)){
goto trigger_cleanup;
}
}
#endif
/* INSTEAD OF triggers can only appear on views and BEFORE triggers
** cannot appear on views. So we might as well translate every
** INSTEAD OF trigger into a BEFORE trigger. It simplifies code
** elsewhere.
*/
if (tr_tm == TK_INSTEAD){
tr_tm = TK_BEFORE;
}
/* Build the Trigger object */
pTrigger = (Trigger*)sqlite3DbMallocZero(db, sizeof(Trigger));
if( pTrigger==0 ) goto trigger_cleanup;
pTrigger->zName = zName;
zName = 0;
pTrigger->table = sqlite3DbStrDup(db, pTableName->a[0].zName);
pTrigger->pSchema = db->aDb[iDb].pSchema;
pTrigger->pTabSchema = pTab->pSchema;
pTrigger->op = (u8)op;
pTrigger->tr_tm = tr_tm==TK_BEFORE ? TRIGGER_BEFORE : TRIGGER_AFTER;
pTrigger->pWhen = sqlite3ExprDup(db, pWhen, EXPRDUP_REDUCE);
pTrigger->pColumns = sqlite3IdListDup(db, pColumns);
assert( pParse->pNewTrigger==0 );
pParse->pNewTrigger = pTrigger;
trigger_cleanup:
sqlite3DbFree(db, zName);
sqlite3SrcListDelete(db, pTableName);
sqlite3IdListDelete(db, pColumns);
sqlite3ExprDelete(db, pWhen);
if( !pParse->pNewTrigger ){
sqlite3DeleteTrigger(db, pTrigger);
}else{
assert( pParse->pNewTrigger==pTrigger );
}
}
/*
** This is called by the parser when it sees a CREATE TRIGGER statement
** up to the point of the BEGIN before the trigger actions. A Trigger
** structure is generated based on the information available and stored
** in pParse->pNewTrigger. After the trigger actions have been parsed, the
** sqlite3FinishTrigger() function is called to complete the trigger
** construction process.
*/
void sqlite3BeginTrigger(
Parse *pParse, /* The parse context of the CREATE TRIGGER statement */
Token *pName1, /* The name of the trigger */
Token *pName2, /* The name of the trigger */
int tr_tm, /* One of TK_BEFORE, TK_AFTER, TK_INSTEAD */
int op, /* One of TK_INSERT, TK_UPDATE, TK_DELETE */
IdList *pColumns, /* column list if this is an UPDATE OF trigger */
SrcList *pTableName,/* The name of the table/view the trigger applies to */
Expr *pWhen, /* WHEN clause */
int isTemp, /* True if the TEMPORARY keyword is present */
int noErr /* Suppress errors if the trigger already exists */
){
Trigger *pTrigger = 0;
Table *pTab;
char *zName = 0; /* Name of the trigger */
sqlite3 *db = pParse->db;
int iDb; /* The database to store the trigger in */
Token *pName; /* The unqualified db name */
DbFixer sFix;
int iTabDb;
assert( pName1!=0 ); /* pName1->z might be NULL, but not pName1 itself */
assert( pName2!=0 );
if( isTemp ){
/* If TEMP was specified, then the trigger name may not be qualified. */
if( pName2->n>0 ){
sqlite3ErrorMsg(pParse, "temporary trigger may not have qualified name");
goto trigger_cleanup;
}
iDb = 1;
pName = pName1;
}else{
/* Figure out the db that the the trigger will be created in */
iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pName);
if( iDb<0 ){
goto trigger_cleanup;
}
}
/* If the trigger name was unqualified, and the table is a temp table,
** then set iDb to 1 to create the trigger in the temporary database.
** If sqlite3SrcListLookup() returns 0, indicating the table does not
** exist, the error is caught by the block below.
*/
if( !pTableName || db->mallocFailed ){
goto trigger_cleanup;
}
pTab = sqlite3SrcListLookup(pParse, pTableName);
if( pName2->n==0 && pTab && pTab->pSchema==db->aDb[1].pSchema ){
iDb = 1;
}
/* Ensure the table name matches database name and that the table exists */
if( db->mallocFailed ) goto trigger_cleanup;
assert( pTableName->nSrc==1 );
if( sqlite3FixInit(&sFix, pParse, iDb, "trigger", pName) &&
sqlite3FixSrcList(&sFix, pTableName) ){
goto trigger_cleanup;
}
pTab = sqlite3SrcListLookup(pParse, pTableName);
if( !pTab ){
/* The table does not exist. */
goto trigger_cleanup;
}
if( IsVirtual(pTab) ){
sqlite3ErrorMsg(pParse, "cannot create triggers on virtual tables");
goto trigger_cleanup;
}
/* Check that the trigger name is not reserved and that no trigger of the
** specified name exists */
zName = sqlite3NameFromToken(db, pName);
if( !zName || SQLITE_OK!=sqlite3CheckObjectName(pParse, zName) ){
goto trigger_cleanup;
}
if( sqlite3HashFind(&(db->aDb[iDb].pSchema->trigHash), zName,strlen(zName)) ){
if( !noErr ){
sqlite3ErrorMsg(pParse, "trigger %T already exists", pName);
}
goto trigger_cleanup;
}
/* Do not create a trigger on a system table */
if( sqlite3StrNICmp(pTab->zName, "sqlite_", 7)==0 ){
sqlite3ErrorMsg(pParse, "cannot create trigger on system table");
pParse->nErr++;
goto trigger_cleanup;
}
/* INSTEAD of triggers are only for views and views only support INSTEAD
** of triggers.
*/
if( pTab->pSelect && tr_tm!=TK_INSTEAD ){
sqlite3ErrorMsg(pParse, "cannot create %s trigger on view: %S",
(tr_tm == TK_BEFORE)?"BEFORE":"AFTER", pTableName, 0);
goto trigger_cleanup;
}
if( !pTab->pSelect && tr_tm==TK_INSTEAD ){
sqlite3ErrorMsg(pParse, "cannot create INSTEAD OF"
" trigger on table: %S", pTableName, 0);
goto trigger_cleanup;
}
iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema);
#ifndef SQLITE_OMIT_AUTHORIZATION
{
int code = SQLITE_CREATE_TRIGGER;
const char *zDb = db->aDb[iTabDb].zName;
const char *zDbTrig = isTemp ? db->aDb[1].zName : zDb;
if( iTabDb==1 || isTemp ) code = SQLITE_CREATE_TEMP_TRIGGER;
if( sqlite3AuthCheck(pParse, code, zName, pTab->zName, zDbTrig) ){
goto trigger_cleanup;
}
if( sqlite3AuthCheck(pParse, SQLITE_INSERT, SCHEMA_TABLE(iTabDb),0,zDb)){
goto trigger_cleanup;
}
}
#endif
/* INSTEAD OF triggers can only appear on views and BEFORE triggers
** cannot appear on views. So we might as well translate every
** INSTEAD OF trigger into a BEFORE trigger. It simplifies code
** elsewhere.
*/
if (tr_tm == TK_INSTEAD){
tr_tm = TK_BEFORE;
}
/* Build the Trigger object */
pTrigger = (Trigger*)sqlite3DbMallocZero(db, sizeof(Trigger));
if( pTrigger==0 ) goto trigger_cleanup;
pTrigger->name = zName;
zName = 0;
pTrigger->table = sqlite3DbStrDup(db, pTableName->a[0].zName);
pTrigger->pSchema = db->aDb[iDb].pSchema;
pTrigger->pTabSchema = pTab->pSchema;
pTrigger->op = op;
pTrigger->tr_tm = tr_tm==TK_BEFORE ? TRIGGER_BEFORE : TRIGGER_AFTER;
pTrigger->pWhen = sqlite3ExprDup(db, pWhen);
pTrigger->pColumns = sqlite3IdListDup(db, pColumns);
sqlite3TokenCopy(db, &pTrigger->nameToken,pName);
assert( pParse->pNewTrigger==0 );
pParse->pNewTrigger = pTrigger;
trigger_cleanup:
sqlite3_free(zName);
sqlite3SrcListDelete(pTableName);
sqlite3IdListDelete(pColumns);
sqlite3ExprDelete(pWhen);
if( !pParse->pNewTrigger ){
sqlite3DeleteTrigger(pTrigger);
}else{
assert( pParse->pNewTrigger==pTrigger );
}
}
/*
** Generate code to implement the "ALTER TABLE xxx RENAME TO yyy"
** command.
*/
void sqlite3AlterRenameTable(
Parse *pParse, /* Parser context. */
SrcList *pSrc, /* The table to rename. */
Token *pName /* The new table name. */
){
int iDb; /* Database that contains the table */
char *zDb; /* Name of database iDb */
Table *pTab; /* Table being renamed */
char *zName = 0; /* NULL-terminated version of pName */
sqlite3 *db = pParse->db; /* Database connection */
Vdbe *v;
#ifndef SQLITE_OMIT_TRIGGER
char *zWhere = 0; /* Where clause to locate temp triggers */
#endif
if( sqlite3_malloc_failed ) goto exit_rename_table;
assert( pSrc->nSrc==1 );
pTab = sqlite3LocateTable(pParse, pSrc->a[0].zName, pSrc->a[0].zDatabase);
if( !pTab ) goto exit_rename_table;
iDb = pTab->iDb;
zDb = db->aDb[iDb].zName;
/* Get a NULL terminated version of the new table name. */
zName = sqlite3NameFromToken(pName);
if( !zName ) goto exit_rename_table;
/* Check that a table or index named 'zName' does not already exist
** in database iDb. If so, this is an error.
*/
if( sqlite3FindTable(db, zName, zDb) || sqlite3FindIndex(db, zName, zDb) ){
sqlite3ErrorMsg(pParse,
"there is already another table or index with this name: %s", zName);
goto exit_rename_table;
}
/* Make sure it is not a system table being altered, or a reserved name
** that the table is being renamed to.
*/
if( strlen(pTab->zName)>6 && 0==sqlite3StrNICmp(pTab->zName, "sqlite_", 7) ){
sqlite3ErrorMsg(pParse, "table %s may not be altered", pTab->zName);
goto exit_rename_table;
}
if( SQLITE_OK!=sqlite3CheckObjectName(pParse, zName) ){
goto exit_rename_table;
}
#ifndef SQLITE_OMIT_AUTHORIZATION
/* Invoke the authorization callback. */
if( sqlite3AuthCheck(pParse, SQLITE_ALTER_TABLE, zDb, pTab->zName, 0) ){
goto exit_rename_table;
}
#endif
/* Begin a transaction and code the VerifyCookie for database iDb.
** Then modify the schema cookie (since the ALTER TABLE modifies the
** schema).
*/
v = sqlite3GetVdbe(pParse);
if( v==0 ){
goto exit_rename_table;
}
sqlite3BeginWriteOperation(pParse, 0, iDb);
sqlite3ChangeCookie(db, v, iDb);
/* Modify the sqlite_master table to use the new table name. */
sqlite3NestedParse(pParse,
"UPDATE %Q.%s SET "
#ifdef SQLITE_OMIT_TRIGGER
"sql = sqlite_rename_table(sql, %Q), "
#else
"sql = CASE "
"WHEN type = 'trigger' THEN sqlite_rename_trigger(sql, %Q)"
"ELSE sqlite_rename_table(sql, %Q) END, "
#endif
"tbl_name = %Q, "
"name = CASE "
"WHEN type='table' THEN %Q "
"WHEN name LIKE 'sqlite_autoindex%%' AND type='index' THEN "
"'sqlite_autoindex_' || %Q || substr(name, %d+18,10) "
"ELSE name END "
"WHERE tbl_name=%Q AND "
"(type='table' OR type='index' OR type='trigger');",
zDb, SCHEMA_TABLE(iDb), zName, zName, zName,
#ifndef SQLITE_OMIT_TRIGGER
zName,
#endif
zName, strlen(pTab->zName), pTab->zName
);
#ifndef SQLITE_OMIT_AUTOINCREMENT
/* If the sqlite_sequence table exists in this database, then update
** it with the new table name.
*/
if( sqlite3FindTable(db, "sqlite_sequence", zDb) ){
sqlite3NestedParse(pParse,
"UPDATE %Q.sqlite_sequence set name = %Q WHERE name = %Q",
zDb, zName, pTab->zName);
}
#endif
#ifndef SQLITE_OMIT_TRIGGER
/* If there are TEMP triggers on this table, modify the sqlite_temp_master
** table. Don't do this if the table being ALTERed is itself located in
** the temp database.
*/
if( (zWhere=whereTempTriggers(pParse, pTab)) ){
sqlite3NestedParse(pParse,
"UPDATE sqlite_temp_master SET "
"sql = sqlite_rename_trigger(sql, %Q), "
"tbl_name = %Q "
"WHERE %s;", zName, zName, zWhere);
sqliteFree(zWhere);
}
#endif
/* Drop and reload the internal table schema. */
reloadTableSchema(pParse, pTab, zName);
exit_rename_table:
sqlite3SrcListDelete(pSrc);
sqliteFree(zName);
}
int sqlcipher_codec_pragma(sqlite3* db, int iDb, Parse *pParse, const char *zLeft, const char *zRight) {
struct Db *pDb = &db->aDb[iDb];
codec_ctx *ctx = NULL;
int rc;
if(pDb->pBt) {
sqlite3pager_get_codec(pDb->pBt->pBt->pPager, (void **) &ctx);
}
CODEC_TRACE(("sqlcipher_codec_pragma: entered db=%p iDb=%d pParse=%p zLeft=%s zRight=%s ctx=%p\n", db, iDb, pParse, zLeft, zRight, ctx));
if( sqlite3StrICmp(zLeft, "cipher_store_pass")==0 && zRight ) {
sqlcipher_codec_set_store_pass(ctx, sqlite3GetBoolean(zRight, 1));
} else
if( sqlite3StrICmp(zLeft, "cipher_store_pass")==0 && !zRight ) {
char *store_pass_value = sqlite3_mprintf("%d", sqlcipher_codec_get_store_pass(ctx));
codec_vdbe_return_static_string(pParse, "cipher_store_pass", store_pass_value);
sqlite3_free(store_pass_value);
}
if( sqlite3StrICmp(zLeft, "cipher_profile")== 0 && zRight ){
char *profile_status = sqlite3_mprintf("%d", sqlcipher_cipher_profile(db, zRight));
codec_vdbe_return_static_string(pParse, "cipher_profile", profile_status);
sqlite3_free(profile_status);
} else
if( sqlite3StrICmp(zLeft, "cipher_add_random")==0 && zRight ){
if(ctx) {
char *add_random_status = sqlite3_mprintf("%d", sqlcipher_codec_add_random(ctx, zRight, sqlite3Strlen30(zRight)));
codec_vdbe_return_static_string(pParse, "cipher_add_random", add_random_status);
sqlite3_free(add_random_status);
}
} else
if( sqlite3StrICmp(zLeft, "cipher_migrate")==0 && !zRight ){
if(ctx){
char *migrate_status = sqlite3_mprintf("%d", sqlcipher_codec_ctx_migrate(ctx));
codec_vdbe_return_static_string(pParse, "cipher_migrate", migrate_status);
sqlite3_free(migrate_status);
}
} else
if( sqlite3StrICmp(zLeft, "cipher_provider")==0 && !zRight ){
if(ctx) { codec_vdbe_return_static_string(pParse, "cipher_provider",
sqlcipher_codec_get_cipher_provider(ctx));
}
} else
if( sqlite3StrICmp(zLeft, "cipher_version")==0 && !zRight ){
codec_vdbe_return_static_string(pParse, "cipher_version", codec_get_cipher_version());
}else
if( sqlite3StrICmp(zLeft, "cipher")==0 ){
if(ctx) {
if( zRight ) {
sqlcipher_codec_ctx_set_cipher(ctx, zRight, 2); // change cipher for both
}else {
codec_vdbe_return_static_string(pParse, "cipher",
sqlcipher_codec_ctx_get_cipher(ctx, 2));
}
}
}else
if( sqlite3StrICmp(zLeft, "rekey_cipher")==0 && zRight ){
if(ctx) sqlcipher_codec_ctx_set_cipher(ctx, zRight, 1); // change write cipher only
}else
if( sqlite3StrICmp(zLeft,"cipher_default_kdf_iter")==0 ){
if( zRight ) {
sqlcipher_set_default_kdf_iter(atoi(zRight)); // change default KDF iterations
} else {
char *kdf_iter = sqlite3_mprintf("%d", sqlcipher_get_default_kdf_iter());
codec_vdbe_return_static_string(pParse, "cipher_default_kdf_iter", kdf_iter);
sqlite3_free(kdf_iter);
}
}else
if( sqlite3StrICmp(zLeft, "kdf_iter")==0 ){
if(ctx) {
if( zRight ) {
sqlcipher_codec_ctx_set_kdf_iter(ctx, atoi(zRight), 2); // change of RW PBKDF2 iteration
} else {
char *kdf_iter = sqlite3_mprintf("%d", sqlcipher_codec_ctx_get_kdf_iter(ctx, 2));
codec_vdbe_return_static_string(pParse, "kdf_iter", kdf_iter);
sqlite3_free(kdf_iter);
}
}
}else
if( sqlite3StrICmp(zLeft, "fast_kdf_iter")==0){
if(ctx) {
if( zRight ) {
sqlcipher_codec_ctx_set_fast_kdf_iter(ctx, atoi(zRight), 2); // change of RW PBKDF2 iteration
} else {
char *fast_kdf_iter = sqlite3_mprintf("%d", sqlcipher_codec_ctx_get_fast_kdf_iter(ctx, 2));
codec_vdbe_return_static_string(pParse, "fast_kdf_iter", fast_kdf_iter);
sqlite3_free(fast_kdf_iter);
}
}
}else
if( sqlite3StrICmp(zLeft, "rekey_kdf_iter")==0 && zRight ){
if(ctx) sqlcipher_codec_ctx_set_kdf_iter(ctx, atoi(zRight), 1); // write iterations only
}else
if( sqlite3StrICmp(zLeft,"cipher_page_size")==0 ){
if(ctx) {
if( zRight ) {
int size = atoi(zRight);
rc = sqlcipher_codec_ctx_set_pagesize(ctx, size);
if(rc != SQLITE_OK) sqlcipher_codec_ctx_set_error(ctx, rc);
rc = codec_set_btree_to_codec_pagesize(db, pDb, ctx);
if(rc != SQLITE_OK) sqlcipher_codec_ctx_set_error(ctx, rc);
} else {
char * page_size = sqlite3_mprintf("%d", sqlcipher_codec_ctx_get_pagesize(ctx));
codec_vdbe_return_static_string(pParse, "cipher_page_size", page_size);
sqlite3_free(page_size);
}
}
}else
if( sqlite3StrICmp(zLeft,"cipher_default_use_hmac")==0 ){
if( zRight ) {
sqlcipher_set_default_use_hmac(sqlite3GetBoolean(zRight,1));
} else {
char *default_use_hmac = sqlite3_mprintf("%d", sqlcipher_get_default_use_hmac());
codec_vdbe_return_static_string(pParse, "cipher_default_use_hmac", default_use_hmac);
sqlite3_free(default_use_hmac);
}
}else
if( sqlite3StrICmp(zLeft,"cipher_use_hmac")==0 ){
if(ctx) {
if( zRight ) {
rc = sqlcipher_codec_ctx_set_use_hmac(ctx, sqlite3GetBoolean(zRight,1));
if(rc != SQLITE_OK) sqlcipher_codec_ctx_set_error(ctx, rc);
/* since the use of hmac has changed, the page size may also change */
rc = codec_set_btree_to_codec_pagesize(db, pDb, ctx);
if(rc != SQLITE_OK) sqlcipher_codec_ctx_set_error(ctx, rc);
} else {
char *hmac_flag = sqlite3_mprintf("%d", sqlcipher_codec_ctx_get_use_hmac(ctx, 2));
codec_vdbe_return_static_string(pParse, "cipher_use_hmac", hmac_flag);
sqlite3_free(hmac_flag);
}
}
}else
if( sqlite3StrICmp(zLeft,"cipher_hmac_pgno")==0 ){
if(ctx) {
if(zRight) {
// clear both pgno endian flags
if(sqlite3StrICmp(zRight, "le") == 0) {
sqlcipher_codec_ctx_unset_flag(ctx, CIPHER_FLAG_BE_PGNO);
sqlcipher_codec_ctx_set_flag(ctx, CIPHER_FLAG_LE_PGNO);
} else if(sqlite3StrICmp(zRight, "be") == 0) {
sqlcipher_codec_ctx_unset_flag(ctx, CIPHER_FLAG_LE_PGNO);
sqlcipher_codec_ctx_set_flag(ctx, CIPHER_FLAG_BE_PGNO);
} else if(sqlite3StrICmp(zRight, "native") == 0) {
sqlcipher_codec_ctx_unset_flag(ctx, CIPHER_FLAG_LE_PGNO);
sqlcipher_codec_ctx_unset_flag(ctx, CIPHER_FLAG_BE_PGNO);
}
} else {
if(sqlcipher_codec_ctx_get_flag(ctx, CIPHER_FLAG_LE_PGNO, 2)) {
codec_vdbe_return_static_string(pParse, "cipher_hmac_pgno", "le");
} else if(sqlcipher_codec_ctx_get_flag(ctx, CIPHER_FLAG_BE_PGNO, 2)) {
codec_vdbe_return_static_string(pParse, "cipher_hmac_pgno", "be");
} else {
codec_vdbe_return_static_string(pParse, "cipher_hmac_pgno", "native");
}
}
}
}else
if( sqlite3StrICmp(zLeft,"cipher_hmac_salt_mask")==0 ){
if(ctx) {
if(zRight) {
if (sqlite3StrNICmp(zRight ,"x'", 2) == 0 && sqlite3Strlen30(zRight) == 5) {
unsigned char mask = 0;
const unsigned char *hex = (const unsigned char *)zRight+2;
cipher_hex2bin(hex,2,&mask);
sqlcipher_set_hmac_salt_mask(mask);
}
} else {
char *hmac_salt_mask = sqlite3_mprintf("%02x", sqlcipher_get_hmac_salt_mask());
codec_vdbe_return_static_string(pParse, "cipher_hmac_salt_mask", hmac_salt_mask);
sqlite3_free(hmac_salt_mask);
}
}
}else {
return 0;
}
return 1;
}
/*
** Generate code to implement the "ALTER TABLE xxx RENAME TO yyy"
** command.
*/
void sqlite3AlterRenameTable(
Parse *pParse, /* Parser context. */
SrcList *pSrc, /* The table to rename. */
Token *pName /* The new table name. */
){
int iDb; /* Database that contains the table */
char *zDb; /* Name of database iDb */
Table *pTab; /* Table being renamed */
char *zName = 0; /* NULL-terminated version of pName */
sqlite3 *db = pParse->db; /* Database connection */
int nTabName; /* Number of UTF-8 characters in zTabName */
const char *zTabName; /* Original name of the table */
Vdbe *v;
#ifndef SQLITE_OMIT_TRIGGER
char *zWhere = 0; /* Where clause to locate temp triggers */
#endif
int isVirtualRename = 0; /* True if this is a v-table with an xRename() */
if( sqlite3MallocFailed() ) goto exit_rename_table;
assert( pSrc->nSrc==1 );
pTab = sqlite3LocateTable(pParse, pSrc->a[0].zName, pSrc->a[0].zDatabase);
if( !pTab ) goto exit_rename_table;
iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
zDb = db->aDb[iDb].zName;
/* Get a NULL terminated version of the new table name. */
zName = sqlite3NameFromToken(pName);
if( !zName ) goto exit_rename_table;
/* Check that a table or index named 'zName' does not already exist
** in database iDb. If so, this is an error.
*/
if( sqlite3FindTable(db, zName, zDb) || sqlite3FindIndex(db, zName, zDb) ){
sqlite3ErrorMsg(pParse,
"there is already another table or index with this name: %s", zName);
goto exit_rename_table;
}
/* Make sure it is not a system table being altered, or a reserved name
** that the table is being renamed to.
*/
if( strlen(pTab->zName)>6 && 0==sqlite3StrNICmp(pTab->zName, "sqlite_", 7) ){
sqlite3ErrorMsg(pParse, "table %s may not be altered", pTab->zName);
goto exit_rename_table;
}
if( SQLITE_OK!=sqlite3CheckObjectName(pParse, zName) ){
goto exit_rename_table;
}
#ifndef SQLITE_OMIT_AUTHORIZATION
/* Invoke the authorization callback. */
if( sqlite3AuthCheck(pParse, SQLITE_ALTER_TABLE, zDb, pTab->zName, 0) ){
goto exit_rename_table;
}
#endif
#ifndef SQLITE_OMIT_VIRTUALTABLE
if( sqlite3ViewGetColumnNames(pParse, pTab) ){
goto exit_rename_table;
}
if( IsVirtual(pTab) && pTab->pMod->pModule->xRename ){
isVirtualRename = 1;
}
#endif
/* Begin a transaction and code the VerifyCookie for database iDb.
** Then modify the schema cookie (since the ALTER TABLE modifies the
** schema). Open a statement transaction if the table is a virtual
** table.
*/
v = sqlite3GetVdbe(pParse);
if( v==0 ){
goto exit_rename_table;
}
sqlite3BeginWriteOperation(pParse, isVirtualRename, iDb);
sqlite3ChangeCookie(db, v, iDb);
/* If this is a virtual table, invoke the xRename() function if
** one is defined. The xRename() callback will modify the names
** of any resources used by the v-table implementation (including other
** SQLite tables) that are identified by the name of the virtual table.
*/
#ifndef SQLITE_OMIT_VIRTUALTABLE
if( isVirtualRename ){
sqlite3VdbeOp3(v, OP_String8, 0, 0, zName, 0);
sqlite3VdbeOp3(v, OP_VRename, 0, 0, (const char*)pTab->pVtab, P3_VTAB);
}
#endif
/* figure out how many UTF-8 characters are in zName */
zTabName = pTab->zName;
nTabName = sqlite3Utf8CharLen(zTabName, -1);
/* Modify the sqlite_master table to use the new table name. */
sqlite3NestedParse(pParse,
"UPDATE %Q.%s SET "
#ifdef SQLITE_OMIT_TRIGGER
"sql = sqlite_rename_table(sql, %Q), "
#else
"sql = CASE "
"WHEN type = 'trigger' THEN sqlite_rename_trigger(sql, %Q)"
"ELSE sqlite_rename_table(sql, %Q) END, "
#endif
"tbl_name = %Q, "
"name = CASE "
"WHEN type='table' THEN %Q "
"WHEN name LIKE 'sqlite_autoindex%%' AND type='index' THEN "
"'sqlite_autoindex_' || %Q || substr(name,%d+18,10) "
"ELSE name END "
"WHERE tbl_name=%Q AND "
"(type='table' OR type='index' OR type='trigger');",
zDb, SCHEMA_TABLE(iDb), zName, zName, zName,
#ifndef SQLITE_OMIT_TRIGGER
zName,
#endif
zName, nTabName, zTabName
);
#ifndef SQLITE_OMIT_AUTOINCREMENT
/* If the sqlite_sequence table exists in this database, then update
** it with the new table name.
*/
if( sqlite3FindTable(db, "sqlite_sequence", zDb) ){
sqlite3NestedParse(pParse,
"UPDATE %Q.sqlite_sequence set name = %Q WHERE name = %Q",
zDb, zName, pTab->zName);
}
#endif
#ifndef SQLITE_OMIT_TRIGGER
/* If there are TEMP triggers on this table, modify the sqlite_temp_master
** table. Don't do this if the table being ALTERed is itself located in
** the temp database.
*/
if( (zWhere=whereTempTriggers(pParse, pTab))!=0 ){
sqlite3NestedParse(pParse,
"UPDATE sqlite_temp_master SET "
"sql = sqlite_rename_trigger(sql, %Q), "
"tbl_name = %Q "
"WHERE %s;", zName, zName, zWhere);
sqliteFree(zWhere);
}
#endif
/* Drop and reload the internal table schema. */
reloadTableSchema(pParse, pTab, zName);
exit_rename_table:
sqlite3SrcListDelete(pSrc);
sqliteFree(zName);
}
static int strCompare(const void *pKey1, int n1, const void *pKey2, int n2){
if( n1!=n2 ) return 1;
return sqlite3StrNICmp((const char*)pKey1,(const char*)pKey2,n1);
}
/*
** Invoke a virtual table constructor (either xCreate or xConnect). The
** pointer to the function to invoke is passed as the fourth parameter
** to this procedure.
*/
static int vtabCallConstructor(
sqlite3 *db,
Table *pTab,
Module *pMod,
int (*xConstruct)(sqlite3*,void*,int,const char*const*,sqlite3_vtab**,char**),
char **pzErr
){
VtabCtx sCtx;
VTable *pVTable;
int rc;
const char *const*azArg = (const char *const*)pTab->azModuleArg;
int nArg = pTab->nModuleArg;
char *zErr = 0;
char *zModuleName;
int iDb;
VtabCtx *pCtx;
/* Check that the virtual-table is not already being initialized */
for(pCtx=db->pVtabCtx; pCtx; pCtx=pCtx->pPrior){
if( pCtx->pTab==pTab ){
*pzErr = sqlite3MPrintf(db,
"vtable constructor called recursively: %s", pTab->zName
);
return SQLITE_LOCKED;
}
}
zModuleName = sqlite3MPrintf(db, "%s", pTab->zName);
if( !zModuleName ){
return SQLITE_NOMEM_BKPT;
}
pVTable = sqlite3DbMallocZero(db, sizeof(VTable));
if( !pVTable ){
sqlite3DbFree(db, zModuleName);
return SQLITE_NOMEM_BKPT;
}
pVTable->db = db;
pVTable->pMod = pMod;
iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
pTab->azModuleArg[1] = db->aDb[iDb].zDbSName;
/* Invoke the virtual table constructor */
assert( &db->pVtabCtx );
assert( xConstruct );
sCtx.pTab = pTab;
sCtx.pVTable = pVTable;
sCtx.pPrior = db->pVtabCtx;
sCtx.bDeclared = 0;
db->pVtabCtx = &sCtx;
rc = xConstruct(db, pMod->pAux, nArg, azArg, &pVTable->pVtab, &zErr);
db->pVtabCtx = sCtx.pPrior;
if( rc==SQLITE_NOMEM ) sqlite3OomFault(db);
assert( sCtx.pTab==pTab );
if( SQLITE_OK!=rc ){
if( zErr==0 ){
*pzErr = sqlite3MPrintf(db, "vtable constructor failed: %s", zModuleName);
}else {
*pzErr = sqlite3MPrintf(db, "%s", zErr);
sqlite3_free(zErr);
}
sqlite3DbFree(db, pVTable);
}else if( ALWAYS(pVTable->pVtab) ){
/* Justification of ALWAYS(): A correct vtab constructor must allocate
** the sqlite3_vtab object if successful. */
memset(pVTable->pVtab, 0, sizeof(pVTable->pVtab[0]));
pVTable->pVtab->pModule = pMod->pModule;
pVTable->nRef = 1;
if( sCtx.bDeclared==0 ){
const char *zFormat = "vtable constructor did not declare schema: %s";
*pzErr = sqlite3MPrintf(db, zFormat, pTab->zName);
sqlite3VtabUnlock(pVTable);
rc = SQLITE_ERROR;
}else{
int iCol;
u8 oooHidden = 0;
/* If everything went according to plan, link the new VTable structure
** into the linked list headed by pTab->pVTable. Then loop through the
** columns of the table to see if any of them contain the token "hidden".
** If so, set the Column COLFLAG_HIDDEN flag and remove the token from
** the type string. */
pVTable->pNext = pTab->pVTable;
pTab->pVTable = pVTable;
for(iCol=0; iCol<pTab->nCol; iCol++){
char *zType = sqlite3ColumnType(&pTab->aCol[iCol], "");
int nType;
int i = 0;
nType = sqlite3Strlen30(zType);
for(i=0; i<nType; i++){
if( 0==sqlite3StrNICmp("hidden", &zType[i], 6)
&& (i==0 || zType[i-1]==' ')
&& (zType[i+6]=='\0' || zType[i+6]==' ')
){
break;
}
}
if( i<nType ){
int j;
int nDel = 6 + (zType[i+6] ? 1 : 0);
for(j=i; (j+nDel)<=nType; j++){
zType[j] = zType[j+nDel];
}
if( zType[i]=='\0' && i>0 ){
assert(zType[i-1]==' ');
zType[i-1] = '\0';
}
pTab->aCol[iCol].colFlags |= COLFLAG_HIDDEN;
oooHidden = TF_OOOHidden;
}else{
pTab->tabFlags |= oooHidden;
}
}
}
}
sqlite3DbFree(db, zModuleName);
return rc;
}
/*
** Invoke a virtual table constructor (either xCreate or xConnect). The
** pointer to the function to invoke is passed as the fourth parameter
** to this procedure.
*/
static int vtabCallConstructor(
sqlite3 *db,
Table *pTab,
Module *pMod,
int (*xConstruct)(sqlite3*,void*,int,const char*const*,sqlite3_vtab**,char**),
char **pzErr
){
int rc;
int rc2;
sqlite3_vtab *pVtab = 0;
const char *const*azArg = (const char *const*)pTab->azModuleArg;
int nArg = pTab->nModuleArg;
char *zErr = 0;
char *zModuleName = sqlite3MPrintf(db, "%s", pTab->zName);
if( !zModuleName ){
return SQLITE_NOMEM;
}
assert( !db->pVTab );
assert( xConstruct );
db->pVTab = pTab;
rc = sqlite3SafetyOff(db);
assert( rc==SQLITE_OK );
rc = xConstruct(db, pMod->pAux, nArg, azArg, &pVtab, &zErr);
rc2 = sqlite3SafetyOn(db);
if( rc==SQLITE_OK && pVtab ){
pVtab->pModule = pMod->pModule;
pVtab->nRef = 1;
pTab->pVtab = pVtab;
}
if( SQLITE_OK!=rc ){
if( zErr==0 ){
*pzErr = sqlite3MPrintf(db, "vtable constructor failed: %s", zModuleName);
}else {
*pzErr = sqlite3MPrintf(db, "%s", zErr);
sqlite3_free(zErr);
}
}else if( db->pVTab ){
const char *zFormat = "vtable constructor did not declare schema: %s";
*pzErr = sqlite3MPrintf(db, zFormat, pTab->zName);
rc = SQLITE_ERROR;
}
if( rc==SQLITE_OK ){
rc = rc2;
}
db->pVTab = 0;
sqlite3_free(zModuleName);
/* If everything went according to plan, loop through the columns
** of the table to see if any of them contain the token "hidden".
** If so, set the Column.isHidden flag and remove the token from
** the type string.
*/
if( rc==SQLITE_OK ){
int iCol;
for(iCol=0; iCol<pTab->nCol; iCol++){
char *zType = pTab->aCol[iCol].zType;
int nType;
int i = 0;
if( !zType ) continue;
nType = strlen(zType);
if( sqlite3StrNICmp("hidden", zType, 6) || (zType[6] && zType[6]!=' ') ){
for(i=0; i<nType; i++){
if( (0==sqlite3StrNICmp(" hidden", &zType[i], 7))
&& (zType[i+7]=='\0' || zType[i+7]==' ')
){
i++;
break;
}
}
}
if( i<nType ){
int j;
int nDel = 6 + (zType[i+6] ? 1 : 0);
for(j=i; (j+nDel)<=nType; j++){
zType[j] = zType[j+nDel];
}
if( zType[i]=='\0' && i>0 ){
assert(zType[i-1]==' ');
zType[i-1] = '\0';
}
pTab->aCol[iCol].isHidden = 1;
}
}
}
return rc;
}