/**
* @brief Consolidate the complicated logic associated with handling SSL_read/SSL_write calls which result in 0, or a negative number.
*/
stringer_t * tls_error(TLS *tls, int_t code, stringer_t *output) {
int tlserr = 0, syserr = 0;
chr_t *message = MEMORYBUF(1024);
stringer_t *result = NULL;
// Check the SSL_get_error() function. If any of the codes listed here (0, 2 or 3) are returned, then the SSL input/output is
// still valid, and may be used for future read and write operations.
if ((tlserr = SSL_get_error_d(tls, code)) == SSL_ERROR_NONE || tlserr == SSL_ERROR_WANT_READ || tlserr == SSL_ERROR_WANT_WRITE) {
return NULL;
}
// If we make it past here, then there should be an error message in the buffer by the time we exit this function.
else if (!(result = st_output(output, 128))) {
log_pedantic("Unable to record the TLS error because the output buffer is invalid.");
return NULL;
}
// We need to record the errno locally to prevent any future function call from clobbering the relevant value.
syserr = errno;
// Note that if errno is non-zero, then the SSL error was probably just an indication we had a system level event, like a peer disconnect.
if (syserr != 0) {
st_sprint(result, "error = %i / errno = %i / message = %s", tlserr, syserr, strerror_r(syserr, message, 1024));
}
// If the operation returned a negative value, but errno indicate no particular problem, then we record that scenario here.
else if (code < 0 && syserr == 0) {
st_sprint(result, "error = %i / errno = 0", tlserr);
}
// SSL error code number 1, an SSL library error occurred, usually because of a protocol problem, and thus the OpenSSL
// error queue should hold more information about the fault.
else if (tlserr == SSL_ERROR_SSL) {
ERR_error_string_n_d(ERR_get_error_d(), message, 1024);
st_sprint(result, "error = %i / errno = 0 / message = %s", tlserr, message);
}
// SSL error code number 5, a non-recoverable I/O error occurred. Usually errno will provide a clue, but not always.
else if (tlserr == SSL_ERROR_SYSCALL) {
ERR_error_string_n_d(ERR_get_error_d(), message, 1024);
st_sprint(result, "error = %i / errno = 0 / message = %s", tlserr, message);
}
// SSL error code number 6, which seems to indicate the remote host shut down the connection.
else if (tlserr == SSL_ERROR_ZERO_RETURN) {
st_sprint(result, "error = %i / message = Connection shut down.", tlserr);
}
// We end up here if the result was zero, and errno was zero, and we didn't recognize the SSL error code directly.
else {
st_sprint(result, "error = %i / errno = 0", tlserr);
}
return result;
}
/**
* @brief Return the name of the TLS cipher suite assoicated with a connection.
* @see SSL_CIPHER_get_name()
* @param tls the TLS connection being inspected.
* @param output a managed string to receive the encoded output; if passed as NULL, an output buffer will be allocated
* which must be freed by the caller.
* @return a pointer to the result, or NULL if an error occurs.
*/
stringer_t * tls_cipher(TLS *tls, stringer_t *output) {
SSL_CIPHER *cipher = NULL;
stringer_t *result = NULL;
chr_t *version = NULL, *name = NULL;
if (!(cipher = SSL_get_current_cipher_d(tls))) {
return NULL;
}
else if (!(version = (chr_t *)SSL_get_version_d(tls))) {
return NULL;
}
else if (!(name = (chr_t *)SSL_CIPHER_get_name_d(cipher))) {
return NULL;
}
else if (!(result = st_output(output, 128))) {
return NULL;
}
st_sprint(result, "version = %s / suite = %s", (st_cmp_cs_eq(NULLER(version), PLACER("TLSv1", 5)) ? version : "TLSv1.0"), name);
return result;
}
static bool split_file(wave_info *info)
{
unsigned char header[CANONICAL_HEADER_SIZE];
char outfilename[FILENAME_SIZE],filenum[FILENAME_SIZE];
int current;
wint discard,bytes;
bool success;
wlong leadin_bytes, leadout_bytes, bytes_to_xfer;
progress_info proginfo;
// uwe
double start_time, end_time, last_end_time;
success = FALSE;
proginfo.initialized = FALSE;
proginfo.prefix = "Splitting";
proginfo.clause = "-->";
proginfo.filename1 = info->filename;
proginfo.filedesc1 = info->m_ss;
proginfo.filename2 = NULL;
proginfo.filedesc2 = NULL;
proginfo.bytes_total = 0;
if (!open_input_stream(info)) {
prog_error(&proginfo);
st_error("could not reopen input file: [%s]",info->filename);
}
discard = info->header_size;
while (discard > 0) {
bytes = min(discard,CANONICAL_HEADER_SIZE);
if (read_n_bytes(info->input,header,bytes,NULL) != bytes) {
prog_error(&proginfo);
st_error("error while discarding %d-byte WAVE header",info->header_size);
}
discard -= bytes;
}
leadin_bytes = (leadin) ? smrt_parse((unsigned char *)leadin,info) : 0;
leadout_bytes = (leadout) ? smrt_parse((unsigned char *)leadout,info) : 0;
adjust_for_leadinout(leadin_bytes,leadout_bytes);
// uwe transcription
st_output("<?xml version=\"1.0\" encoding=\"ISO-8859-1\"?>\n");
st_output("<Trans version=\"2\">\n\n");
start_time = end_time = last_end_time = 0;
for (current=0;current<numfiles;current++) {
if (SPLIT_INPUT_CUE == input_type && cueinfo.format) {
create_output_filename(cueinfo.filenames[current],"",outfilename);
}
else {
st_snprintf(filenum,8,num_format,current+offset);
create_output_filename(filenum,"",outfilename);
}
files[current]->chunk_size = files[current]->data_size + CANONICAL_HEADER_SIZE - 8;
files[current]->channels = info->channels;
files[current]->samples_per_sec = info->samples_per_sec;
files[current]->avg_bytes_per_sec = info->avg_bytes_per_sec;
files[current]->block_align = info->block_align;
files[current]->bits_per_sample = info->bits_per_sample;
files[current]->wave_format = info->wave_format;
files[current]->rate = info->rate;
files[current]->length = files[current]->data_size / (wlong)info->rate;
files[current]->exact_length = (double)files[current]->data_size / (double)info->rate;
files[current]->total_size = files[current]->chunk_size + 8;
length_to_str(files[current]);
proginfo.filedesc2 = files[current]->m_ss;
proginfo.bytes_total = files[current]->total_size;
if (extract_track[current]) {
proginfo.prefix = "Splitting";
proginfo.filename2 = outfilename;
// uwe transcription
start_time += last_end_time;
end_time += files[current]->data_size / (wlong)info->rate;
last_end_time = end_time;
printf("<Turn startTime=\"%.2f\"", start_time); // %.2f
st_output(" endTime=\"%.2f\"", end_time);
st_output(" splitFilename=\"%s\"", outfilename);
st_output(" speaker=\"spk1\">\n");
st_output("<Sync time=\"%.2f\"/>\n", start_time);
st_output("***Include transcript words here***\n");
st_output("</Turn>\n");
if (NULL == (files[current]->output = open_output_stream(outfilename,&files[current]->output_proc))) {
prog_error(&proginfo);
st_error("could not open output file");
}
}
else {
proginfo.prefix = "Skipping ";
proginfo.filename2 = NULLDEVICE;
if (NULL == (files[current]->output = open_output(NULLDEVICE))) {
prog_error(&proginfo);
st_error("while skipping track %d: could not open output file: [%s]",current+1,NULLDEVICE);
}
files[current]->output_proc.pid = NO_CHILD_PID;
}
if (PROB_ODD_SIZED_DATA(files[current]))
files[current]->chunk_size++;
make_canonical_header(header,files[current]);
// uwe disable
//prog_update(&proginfo);
if (write_n_bytes(files[current]->output,header,CANONICAL_HEADER_SIZE,&proginfo) != CANONICAL_HEADER_SIZE) {
prog_error(&proginfo);
st_warning("error while writing %d-byte WAVE header",CANONICAL_HEADER_SIZE);
goto cleanup;
}
/* if this is not the first file, finish up writing previous file, and simultaneously start writing to current file */
if (0 != current) {
/* write overlapping lead-in/lead-out data to both previous and current files */
if (transfer_n_bytes2(info->input,files[current]->output,files[current-1]->output,leadin_bytes+leadout_bytes,&proginfo) != leadin_bytes+leadout_bytes) {
prog_error(&proginfo);
st_warning("error while transferring %ld bytes of lead-in/lead-out",leadin_bytes+leadout_bytes);
goto cleanup;
}
/* pad and close previous file */
if (PROB_ODD_SIZED_DATA(files[current-1]) && (1 != write_padding(files[current-1]->output,1,&proginfo))) {
prog_error(&proginfo);
st_warning("error while NULL-padding odd-sized data chunk");
goto cleanup;
}
close_output(files[current-1]->output,files[current-1]->output_proc);
}
/* transfer unique non-overlapping data from input file to current file */
bytes_to_xfer = files[current]->new_data_size;
if (0 != current)
bytes_to_xfer -= leadout_bytes;
if (numfiles - 1 != current)
bytes_to_xfer -= leadin_bytes;
if (transfer_n_bytes(info->input,files[current]->output,bytes_to_xfer,&proginfo) != bytes_to_xfer) {
prog_error(&proginfo);
st_warning("error while transferring %ld bytes of data",bytes_to_xfer);
goto cleanup;
}
/* if this is the last file, close it */
if (numfiles - 1 == current) {
/* pad and close current file */
if (PROB_ODD_SIZED_DATA(files[current]) && (1 != write_padding(files[current]->output,1,&proginfo))) {
prog_error(&proginfo);
st_warning("error while NULL-padding odd-sized data chunk");
goto cleanup;
}
close_output(files[current]->output,files[current]->output_proc);
// uwe transcription
st_output("</Trans>\n");
}
// uwe disable
// prog_success(&proginfo);
}
close_input_stream(info);
success = TRUE;
cleanup:
if (!success) {
close_output(files[current]->output,files[current]->output_proc);
remove_file(outfilename);
st_error("failed to split file");
}
return success;
}
