int stm32_sdmmc2_mmc_init(struct stm32_sdmmc2_params *params)
{
int ret;
assert((params != NULL) &&
((params->reg_base & MMC_BLOCK_MASK) == 0U) &&
((params->bus_width == MMC_BUS_WIDTH_1) ||
(params->bus_width == MMC_BUS_WIDTH_4) ||
(params->bus_width == MMC_BUS_WIDTH_8)));
memcpy(&sdmmc2_params, params, sizeof(struct stm32_sdmmc2_params));
if (stm32_sdmmc2_dt_get_config() != 0) {
ERROR("%s: DT error\n", __func__);
return -ENOMEM;
}
ret = stm32mp1_clk_enable(sdmmc2_params.clock_id);
if (ret != 0) {
ERROR("%s: clock %d failed\n", __func__,
sdmmc2_params.clock_id);
return ret;
}
stm32mp1_reset_assert(sdmmc2_params.reset_id);
udelay(2);
stm32mp1_reset_deassert(sdmmc2_params.reset_id);
mdelay(1);
sdmmc2_params.clk_rate = stm32mp1_clk_get_rate(sdmmc2_params.clock_id);
return mmc_init(&stm32_sdmmc2_ops, sdmmc2_params.clk_rate,
sdmmc2_params.bus_width, sdmmc2_params.flags,
sdmmc2_params.device_info);
}
/*******************************************************************************
* STM32MP1 handler called when a power domain is about to be turned on. The
* mpidr determines the CPU to be turned on.
* call by core 0 to activate core 1
******************************************************************************/
static int stm32_pwr_domain_on(u_register_t mpidr)
{
unsigned long current_cpu_mpidr = read_mpidr_el1();
uint32_t tamp_clk_off = 0;
uint32_t bkpr_core1_addr =
tamp_bkpr(BOOT_API_CORE1_BRANCH_ADDRESS_TAMP_BCK_REG_IDX);
uint32_t bkpr_core1_magic =
tamp_bkpr(BOOT_API_CORE1_MAGIC_NUMBER_TAMP_BCK_REG_IDX);
if (mpidr == current_cpu_mpidr) {
return PSCI_E_INVALID_PARAMS;
}
if ((stm32_sec_entrypoint < STM32MP1_SRAM_BASE) ||
(stm32_sec_entrypoint > (STM32MP1_SRAM_BASE +
(STM32MP1_SRAM_SIZE - 1)))) {
return PSCI_E_INVALID_ADDRESS;
}
if (!stm32mp1_clk_is_enabled(RTCAPB)) {
tamp_clk_off = 1;
if (stm32mp1_clk_enable(RTCAPB) != 0) {
panic();
}
}
cntfrq_core0 = read_cntfrq_el0();
/* Write entrypoint in backup RAM register */
mmio_write_32(bkpr_core1_addr, stm32_sec_entrypoint);
/* Write magic number in backup register */
mmio_write_32(bkpr_core1_magic, BOOT_API_A7_CORE1_MAGIC_NUMBER);
if (tamp_clk_off != 0U) {
if (stm32mp1_clk_disable(RTCAPB) != 0) {
panic();
}
}
/* Generate an IT to core 1 */
mmio_write_32(STM32MP1_GICD_BASE + GICD_SGIR,
SEND_SECURE_IT_TO_CORE_1 | ARM_IRQ_SEC_SGI_0);
return PSCI_E_SUCCESS;
}
