static int stm32mp1_ddr_setup(void)
{
struct ddr_info *priv = &ddr_priv_data;
int ret;
struct stm32mp1_ddr_config config;
int node, len;
uint32_t uret, idx;
void *fdt;
#define PARAM(x, y) \
{ \
.name = x, \
.offset = offsetof(struct stm32mp1_ddr_config, y), \
.size = sizeof(config.y) / sizeof(uint32_t) \
}
#define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x)
#define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x)
const struct {
const char *name; /* Name in DT */
const uint32_t offset; /* Offset in config struct */
const uint32_t size; /* Size of parameters */
} param[] = {
CTL_PARAM(reg),
CTL_PARAM(timing),
CTL_PARAM(map),
CTL_PARAM(perf),
PHY_PARAM(reg),
PHY_PARAM(timing),
PHY_PARAM(cal)
};
if (fdt_get_address(&fdt) == 0) {
return -ENOENT;
}
node = fdt_node_offset_by_compatible(fdt, -1, DT_DDR_COMPAT);
if (node < 0) {
ERROR("%s: Cannot read DDR node in DT\n", __func__);
return -EINVAL;
}
config.info.speed = fdt_read_uint32_default(node, "st,mem-speed", 0);
if (!config.info.speed) {
VERBOSE("%s: no st,mem-speed\n", __func__);
return -EINVAL;
}
config.info.size = fdt_read_uint32_default(node, "st,mem-size", 0);
if (!config.info.size) {
VERBOSE("%s: no st,mem-size\n", __func__);
return -EINVAL;
}
config.info.name = fdt_getprop(fdt, node, "st,mem-name", &len);
if (config.info.name == NULL) {
VERBOSE("%s: no st,mem-name\n", __func__);
return -EINVAL;
}
INFO("RAM: %s\n", config.info.name);
for (idx = 0; idx < ARRAY_SIZE(param); idx++) {
ret = fdt_read_uint32_array(node, param[idx].name,
(void *)((uintptr_t)&config +
param[idx].offset),
param[idx].size);
VERBOSE("%s: %s[0x%x] = %d\n", __func__,
param[idx].name, param[idx].size, ret);
if (ret != 0) {
ERROR("%s: Cannot read %s\n",
__func__, param[idx].name);
return -EINVAL;
}
}
/* Disable axidcg clock gating during init */
mmio_clrbits_32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_AXIDCGEN);
stm32mp1_ddr_init(priv, &config);
/* Enable axidcg clock gating */
mmio_setbits_32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_AXIDCGEN);
priv->info.size = config.info.size;
VERBOSE("%s : ram size(%x, %x)\n", __func__,
(uint32_t)priv->info.base, (uint32_t)priv->info.size);
write_sctlr(read_sctlr() & ~SCTLR_C_BIT);
dcsw_op_all(DC_OP_CISW);
uret = ddr_test_data_bus();
if (uret != 0U) {
ERROR("DDR data bus test: can't access memory @ 0x%x\n",
uret);
panic();
}
uret = ddr_test_addr_bus();
if (uret != 0U) {
ERROR("DDR addr bus test: can't access memory @ 0x%x\n",
uret);
panic();
}
uret = ddr_check_size();
if (uret < config.info.size) {
ERROR("DDR size: 0x%x does not match DT config: 0x%x\n",
uret, config.info.size);
panic();
}
write_sctlr(read_sctlr() | SCTLR_C_BIT);
return 0;
}
static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev)
{
struct ddr_info *priv = dev_get_priv(dev);
int ret, idx;
struct clk axidcg;
struct stm32mp1_ddr_config config;
#define PARAM(x, y) \
{ x,\
offsetof(struct stm32mp1_ddr_config, y),\
sizeof(config.y) / sizeof(u32)}
#define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x)
#define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x)
const struct {
const char *name; /* name in DT */
const u32 offset; /* offset in config struct */
const u32 size; /* size of parameters */
} param[] = {
CTL_PARAM(reg),
CTL_PARAM(timing),
CTL_PARAM(map),
CTL_PARAM(perf),
PHY_PARAM(reg),
PHY_PARAM(timing),
PHY_PARAM(cal)
};
config.info.speed = dev_read_u32_default(dev, "st,mem-speed", 0);
config.info.size = dev_read_u32_default(dev, "st,mem-size", 0);
config.info.name = dev_read_string(dev, "st,mem-name");
if (!config.info.name) {
debug("%s: no st,mem-name\n", __func__);
return -EINVAL;
}
printf("RAM: %s\n", config.info.name);
for (idx = 0; idx < ARRAY_SIZE(param); idx++) {
ret = dev_read_u32_array(dev, param[idx].name,
(void *)((u32)&config +
param[idx].offset),
param[idx].size);
debug("%s: %s[0x%x] = %d\n", __func__,
param[idx].name, param[idx].size, ret);
if (ret) {
pr_err("%s: Cannot read %s\n",
__func__, param[idx].name);
return -EINVAL;
}
}
ret = clk_get_by_name(dev, "axidcg", &axidcg);
if (ret) {
debug("%s: Cannot found axidcg\n", __func__);
return -EINVAL;
}
clk_disable(&axidcg); /* disable clock gating during init */
stm32mp1_ddr_init(priv, &config);
clk_enable(&axidcg); /* enable clock gating */
/* check size */
debug("%s : get_ram_size(%x, %x)\n", __func__,
(u32)priv->info.base, (u32)STM32_DDR_SIZE);
priv->info.size = get_ram_size((long *)priv->info.base,
STM32_DDR_SIZE);
debug("%s : %x\n", __func__, (u32)priv->info.size);
/* check memory access for all memory */
if (config.info.size != priv->info.size) {
printf("DDR invalid size : 0x%x, expected 0x%x\n",
priv->info.size, config.info.size);
return -EINVAL;
}
return 0;
}
