/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
int do_signal(sigset_t *oldset, struct pt_regs *regs)
{
siginfo_t info;
int signr;
struct k_sigaction ka;
/*
* If the current thread is 32 bit - invoke the
* 32 bit signal handling code
*/
if (test_thread_flag(TIF_32BIT))
return do_signal32(oldset, regs);
if (!oldset)
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
if (TRAP(regs) == 0x0C00)
syscall_restart(regs, &ka);
/*
* Reenable the DABR before delivering the signal to
* user space. The DABR will have been cleared if it
* triggered inside the kernel.
*/
if (current->thread.dabr)
set_dabr(current->thread.dabr);
return handle_signal(signr, &ka, &info, oldset, regs);
}
if (TRAP(regs) == 0x0C00) { /* System Call! */
if ((int)regs->result == -ERESTARTNOHAND ||
(int)regs->result == -ERESTARTSYS ||
(int)regs->result == -ERESTARTNOINTR) {
regs->gpr[3] = regs->orig_gpr3;
regs->nip -= 4; /* Back up & retry system call */
regs->result = 0;
} else if ((int)regs->result == -ERESTART_RESTARTBLOCK) {
regs->gpr[0] = __NR_restart_syscall;
regs->nip -= 4;
regs->result = 0;
}
}
return 0;
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*
* "r0" and "r19" are the registers we need to restore for system call
* restart. "r0" is also used as an indicator whether we can restart at
* all (if we get here from anything but a syscall return, it will be 0)
*/
static int
do_signal(sigset_t *oldset, struct pt_regs * regs, struct switch_stack * sw,
unsigned long r0, unsigned long r19)
{
siginfo_t info;
int signr;
unsigned long single_stepping = ptrace_cancel_bpt(current);
struct k_sigaction ka;
if (!oldset)
oldset = ¤t->blocked;
/* This lets the debugger run, ... */
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
/* ... so re-check the single stepping. */
single_stepping |= ptrace_cancel_bpt(current);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
if (r0) syscall_restart(r0, r19, regs, &ka);
handle_signal(signr, &ka, &info, oldset, regs, sw);
if (single_stepping)
ptrace_set_bpt(current); /* re-set bpt */
return 1;
}
if (r0) {
switch (regs->r0) {
case ERESTARTNOHAND:
case ERESTARTSYS:
case ERESTARTNOINTR:
/* Reset v0 and a3 and replay syscall. */
regs->r0 = r0;
regs->r19 = r19;
regs->pc -= 4;
break;
case ERESTART_RESTARTBLOCK:
/* Force v0 to the restart syscall and reply. */
regs->r0 = __NR_restart_syscall;
regs->pc -= 4;
break;
}
}
if (single_stepping)
ptrace_set_bpt(current); /* re-set breakpoint */
return 0;
}
/* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
static int do_signal(sigset_t *oldset, struct pt_regs * regs,
unsigned long orig_i0, int restart_syscall)
{
siginfo_t info;
struct signal_deliver_cookie cookie;
struct k_sigaction ka;
int signr;
cookie.restart_syscall = restart_syscall;
cookie.orig_i0 = orig_i0;
if (!oldset)
oldset = ¤t->blocked;
#ifdef CONFIG_SPARC32_COMPAT
if (test_thread_flag(TIF_32BIT)) {
extern int do_signal32(sigset_t *, struct pt_regs *,
unsigned long, int);
return do_signal32(oldset, regs, orig_i0,
cookie.restart_syscall);
}
#endif
signr = get_signal_to_deliver(&info, &ka, regs, &cookie);
if (signr > 0) {
if (cookie.restart_syscall)
syscall_restart(orig_i0, regs, &ka.sa);
handle_signal(signr, &ka, &info, oldset, regs);
return 1;
}
if (cookie.restart_syscall &&
(regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
regs->u_regs[UREG_I0] == ERESTARTSYS ||
regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
/* replay the system call when we are done */
regs->u_regs[UREG_I0] = cookie.orig_i0;
regs->tpc -= 4;
regs->tnpc -= 4;
}
if (cookie.restart_syscall &&
regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
regs->u_regs[UREG_G1] = __NR_restart_syscall;
regs->tpc -= 4;
regs->tnpc -= 4;
}
return 0;
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*
* "r0" and "r19" are the registers we need to restore for system call
* restart. "r0" is also used as an indicator whether we can restart at
* all (if we get here from anything but a syscall return, it will be 0)
*/
static void
do_signal(struct pt_regs *regs, unsigned long r0, unsigned long r19)
{
siginfo_t info;
int signr;
unsigned long single_stepping = ptrace_cancel_bpt(current);
struct k_sigaction ka;
/* This lets the debugger run, ... */
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
/* ... so re-check the single stepping. */
single_stepping |= ptrace_cancel_bpt(current);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
if (r0)
syscall_restart(r0, r19, regs, &ka);
handle_signal(signr, &ka, &info, regs);
if (single_stepping)
ptrace_set_bpt(current); /* re-set bpt */
return;
}
if (r0) {
switch (regs->r0) {
case ERESTARTNOHAND:
case ERESTARTSYS:
case ERESTARTNOINTR:
/* Reset v0 and a3 and replay syscall. */
regs->r0 = r0;
regs->r19 = r19;
regs->pc -= 4;
break;
case ERESTART_RESTARTBLOCK:
/* Force v0 to the restart syscall and reply. */
regs->r0 = __NR_restart_syscall;
regs->pc -= 4;
break;
}
}
/* If there's no signal to deliver, we just restore the saved mask. */
restore_saved_sigmask();
if (single_stepping)
ptrace_set_bpt(current); /* re-set breakpoint */
}
int
do_signal(sigset_t *oldset, struct pt_regs *regs)
{
siginfo_t info;
int signr;
/*
* If the current thread is 32 bit - invoke the
* 32 bit signal handling code
*/
if (current->thread.flags & PPC_FLAG_32BIT)
return do_signal32(oldset, regs);
if (!oldset)
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, regs);
if (signr > 0) {
struct k_sigaction *ka = ¤t->sig->action[signr-1];
/* Whee! Actually deliver the signal. */
if (regs->trap == 0x0C00)
syscall_restart(regs, ka);
handle_signal(signr, ka, &info, oldset, regs);
return 1;
}
if (regs->trap == 0x0C00 /* System Call! */ &&
((int)regs->result == -ERESTARTNOHAND ||
(int)regs->result == -ERESTARTSYS ||
(int)regs->result == -ERESTARTNOINTR)) {
regs->gpr[3] = regs->orig_gpr3;
regs->nip -= 4; /* Back up & retry system call */
regs->result = 0;
}
return 0;
}
/* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
{
struct k_sigaction ka;
int restart_syscall;
sigset_t *oldset;
siginfo_t info;
int signr;
if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C))
restart_syscall = 1;
else
restart_syscall = 0;
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = ¤t->saved_sigmask;
else
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
/* If the debugger messes with the program counter, it clears
* the software "in syscall" bit, directing us to not perform
* a syscall restart.
*/
if (restart_syscall && !pt_regs_is_syscall(regs))
restart_syscall = 0;
if (signr > 0) {
if (restart_syscall)
syscall_restart(orig_i0, regs, &ka.sa);
if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
/* a signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
* clear the TIF_RESTORE_SIGMASK flag.
*/
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
return;
}
if (restart_syscall &&
(regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
regs->u_regs[UREG_I0] == ERESTARTSYS ||
regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
/* replay the system call when we are done */
regs->u_regs[UREG_I0] = orig_i0;
regs->pc -= 4;
regs->npc -= 4;
pt_regs_clear_syscall(regs);
}
if (restart_syscall &&
regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
regs->u_regs[UREG_G1] = __NR_restart_syscall;
regs->pc -= 4;
regs->npc -= 4;
pt_regs_clear_syscall(regs);
}
/* if there's no signal to deliver, we just put the saved sigmask
* back
*/
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
}
/* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
static void do_signal(struct pt_regs *regs, unsigned long orig_i0, int restart_syscall)
{
siginfo_t info;
struct signal_deliver_cookie cookie;
struct k_sigaction ka;
int signr;
sigset_t *oldset;
cookie.restart_syscall = restart_syscall;
cookie.orig_i0 = orig_i0;
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = ¤t->saved_sigmask;
else
oldset = ¤t->blocked;
#ifdef CONFIG_SPARC32_COMPAT
if (test_thread_flag(TIF_32BIT)) {
extern void do_signal32(sigset_t *, struct pt_regs *,
unsigned long, int);
do_signal32(oldset, regs, orig_i0,
cookie.restart_syscall);
return;
}
#endif
signr = get_signal_to_deliver(&info, &ka, regs, &cookie);
if (signr > 0) {
if (cookie.restart_syscall)
syscall_restart(orig_i0, regs, &ka.sa);
handle_signal(signr, &ka, &info, oldset, regs);
/* a signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
* clear the TIF_RESTORE_SIGMASK flag.
*/
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
return;
}
if (cookie.restart_syscall &&
(regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
regs->u_regs[UREG_I0] == ERESTARTSYS ||
regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
/* replay the system call when we are done */
regs->u_regs[UREG_I0] = cookie.orig_i0;
regs->tpc -= 4;
regs->tnpc -= 4;
}
if (cookie.restart_syscall &&
regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
regs->u_regs[UREG_G1] = __NR_restart_syscall;
regs->tpc -= 4;
regs->tnpc -= 4;
}
/* if there's no signal to deliver, we just put the saved sigmask
* back
*/
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*
* "r0" and "r19" are the registers we need to restore for system call
* restart. "r0" is also used as an indicator whether we can restart at
* all (if we get here from anything but a syscall return, it will be 0)
*/
static void
do_signal(struct pt_regs * regs, struct switch_stack * sw,
unsigned long r0, unsigned long r19)
{
siginfo_t info;
int signr;
unsigned long single_stepping = ptrace_cancel_bpt(current);
struct k_sigaction ka;
sigset_t *oldset;
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = ¤t->saved_sigmask;
else
oldset = ¤t->blocked;
/* This lets the debugger run, ... */
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
/* ... so re-check the single stepping. */
single_stepping |= ptrace_cancel_bpt(current);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
if (r0)
syscall_restart(r0, r19, regs, &ka);
if (handle_signal(signr, &ka, &info, oldset, regs, sw) == 0) {
/* A signal was successfully delivered, and the
saved sigmask was stored on the signal frame,
and will be restored by sigreturn. So we can
simply clear the restore sigmask flag. */
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
if (single_stepping)
ptrace_set_bpt(current); /* re-set bpt */
return;
}
if (r0) {
switch (regs->r0) {
case ERESTARTNOHAND:
case ERESTARTSYS:
case ERESTARTNOINTR:
/* Reset v0 and a3 and replay syscall. */
regs->r0 = r0;
regs->r19 = r19;
regs->pc -= 4;
break;
case ERESTART_RESTARTBLOCK:
/* Force v0 to the restart syscall and reply. */
regs->r0 = __NR_restart_syscall;
regs->pc -= 4;
break;
}
}
/* If there's no signal to deliver, we just restore the saved mask. */
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
if (single_stepping)
ptrace_set_bpt(current); /* re-set breakpoint */
}
/* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
{
struct k_sigaction ka;
int restart_syscall;
sigset_t *oldset;
siginfo_t info;
int signr;
/* It's a lot of work and synchronization to add a new ptrace
* register for GDB to save and restore in order to get
* orig_i0 correct for syscall restarts when debugging.
*
* Although it should be the case that most of the global
* registers are volatile across a system call, glibc already
* depends upon that fact that we preserve them. So we can't
* just use any global register to save away the orig_i0 value.
*
* In particular %g2, %g3, %g4, and %g5 are all assumed to be
* preserved across a system call trap by various pieces of
* code in glibc.
*
* %g7 is used as the "thread register". %g6 is not used in
* any fixed manner. %g6 is used as a scratch register and
* a compiler temporary, but it's value is never used across
* a system call. Therefore %g6 is usable for orig_i0 storage.
*/
if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C))
regs->u_regs[UREG_G6] = orig_i0;
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = ¤t->saved_sigmask;
else
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
/* If the debugger messes with the program counter, it clears
* the software "in syscall" bit, directing us to not perform
* a syscall restart.
*/
restart_syscall = 0;
if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C)) {
restart_syscall = 1;
orig_i0 = regs->u_regs[UREG_G6];
}
if (signr > 0) {
if (restart_syscall)
syscall_restart(orig_i0, regs, &ka.sa);
if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
/* a signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
* clear the TIF_RESTORE_SIGMASK flag.
*/
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
return;
}
if (restart_syscall &&
(regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
regs->u_regs[UREG_I0] == ERESTARTSYS ||
regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
/* replay the system call when we are done */
regs->u_regs[UREG_I0] = orig_i0;
regs->pc -= 4;
regs->npc -= 4;
pt_regs_clear_syscall(regs);
}
if (restart_syscall &&
regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
regs->u_regs[UREG_G1] = __NR_restart_syscall;
regs->pc -= 4;
regs->npc -= 4;
pt_regs_clear_syscall(regs);
}
/* if there's no signal to deliver, we just put the saved sigmask
* back
*/
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
}
/* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
{
struct k_sigaction ka;
int restart_syscall;
sigset_t *oldset;
siginfo_t info;
int signr;
if (pt_regs_is_syscall(regs) &&
(regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
restart_syscall = 1;
} else
restart_syscall = 0;
if (current_thread_info()->status & TS_RESTORE_SIGMASK)
oldset = ¤t->saved_sigmask;
else
oldset = ¤t->blocked;
#ifdef CONFIG_COMPAT
if (test_thread_flag(TIF_32BIT)) {
extern void do_signal32(sigset_t *, struct pt_regs *,
int restart_syscall,
unsigned long orig_i0);
do_signal32(oldset, regs, restart_syscall, orig_i0);
return;
}
#endif
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
/* If the debugger messes with the program counter, it clears
* the software "in syscall" bit, directing us to not perform
* a syscall restart.
*/
if (restart_syscall && !pt_regs_is_syscall(regs))
restart_syscall = 0;
if (signr > 0) {
if (restart_syscall)
syscall_restart(orig_i0, regs, &ka.sa);
handle_signal(signr, &ka, &info, oldset, regs);
/* A signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
* clear the TS_RESTORE_SIGMASK flag.
*/
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
tracehook_signal_handler(signr, &info, &ka, regs, 0);
return;
}
if (restart_syscall &&
(regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
regs->u_regs[UREG_I0] == ERESTARTSYS ||
regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
/* replay the system call when we are done */
regs->u_regs[UREG_I0] = orig_i0;
regs->tpc -= 4;
regs->tnpc -= 4;
}
if (restart_syscall &&
regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
regs->u_regs[UREG_G1] = __NR_restart_syscall;
regs->tpc -= 4;
regs->tnpc -= 4;
}
/* If there's no signal to deliver, we just put the saved sigmask
* back
*/
if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
}
/* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
{
struct ksignal ksig;
int restart_syscall;
bool has_handler;
/* It's a lot of work and synchronization to add a new ptrace
* register for GDB to save and restore in order to get
* orig_i0 correct for syscall restarts when debugging.
*
* Although it should be the case that most of the global
* registers are volatile across a system call, glibc already
* depends upon that fact that we preserve them. So we can't
* just use any global register to save away the orig_i0 value.
*
* In particular %g2, %g3, %g4, and %g5 are all assumed to be
* preserved across a system call trap by various pieces of
* code in glibc.
*
* %g7 is used as the "thread register". %g6 is not used in
* any fixed manner. %g6 is used as a scratch register and
* a compiler temporary, but it's value is never used across
* a system call. Therefore %g6 is usable for orig_i0 storage.
*/
if (pt_regs_is_syscall(regs) &&
(regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)))
regs->u_regs[UREG_G6] = orig_i0;
#ifdef CONFIG_COMPAT
if (test_thread_flag(TIF_32BIT)) {
extern void do_signal32(struct pt_regs *);
do_signal32(regs);
return;
}
#endif
has_handler = get_signal(&ksig);
restart_syscall = 0;
if (pt_regs_is_syscall(regs) &&
(regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
restart_syscall = 1;
orig_i0 = regs->u_regs[UREG_G6];
}
if (has_handler) {
if (restart_syscall)
syscall_restart(orig_i0, regs, &ksig.ka.sa);
signal_setup_done(setup_rt_frame(&ksig, regs), &ksig, 0);
} else {
if (restart_syscall) {
switch (regs->u_regs[UREG_I0]) {
case ERESTARTNOHAND:
case ERESTARTSYS:
case ERESTARTNOINTR:
/* replay the system call when we are done */
regs->u_regs[UREG_I0] = orig_i0;
regs->tpc -= 4;
regs->tnpc -= 4;
pt_regs_clear_syscall(regs);
case ERESTART_RESTARTBLOCK:
regs->u_regs[UREG_G1] = __NR_restart_syscall;
regs->tpc -= 4;
regs->tnpc -= 4;
pt_regs_clear_syscall(regs);
}
}
restore_saved_sigmask();
}
}
/* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
{
struct ksignal ksig;
int restart_syscall;
bool has_handler;
/* It's a lot of work and synchronization to add a new ptrace
* register for GDB to save and restore in order to get
* orig_i0 correct for syscall restarts when debugging.
*
* Although it should be the case that most of the global
* registers are volatile across a system call, glibc already
* depends upon that fact that we preserve them. So we can't
* just use any global register to save away the orig_i0 value.
*
* In particular %g2, %g3, %g4, and %g5 are all assumed to be
* preserved across a system call trap by various pieces of
* code in glibc.
*
* %g7 is used as the "thread register". %g6 is not used in
* any fixed manner. %g6 is used as a scratch register and
* a compiler temporary, but it's value is never used across
* a system call. Therefore %g6 is usable for orig_i0 storage.
*/
if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C))
regs->u_regs[UREG_G6] = orig_i0;
has_handler = get_signal(&ksig);
/* If the debugger messes with the program counter, it clears
* the software "in syscall" bit, directing us to not perform
* a syscall restart.
*/
restart_syscall = 0;
if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C)) {
restart_syscall = 1;
orig_i0 = regs->u_regs[UREG_G6];
}
if (has_handler) {
if (restart_syscall)
syscall_restart(orig_i0, regs, &ksig.ka.sa);
handle_signal(&ksig, regs);
} else {
if (restart_syscall) {
switch (regs->u_regs[UREG_I0]) {
case ERESTARTNOHAND:
case ERESTARTSYS:
case ERESTARTNOINTR:
/* replay the system call when we are done */
regs->u_regs[UREG_I0] = orig_i0;
regs->pc -= 4;
regs->npc -= 4;
pt_regs_clear_syscall(regs);
case ERESTART_RESTARTBLOCK:
regs->u_regs[UREG_G1] = __NR_restart_syscall;
regs->pc -= 4;
regs->npc -= 4;
pt_regs_clear_syscall(regs);
}
}
restore_saved_sigmask();
}
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
int do_signal(sigset_t *oldset, struct pt_regs *regs)
{
siginfo_t info;
int signr;
struct k_sigaction ka;
/*
* If the current thread is 32 bit - invoke the
* 32 bit signal handling code
*/
if (test_thread_flag(TIF_32BIT))
return do_signal32(oldset, regs);
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = ¤t->saved_sigmask;
else if (!oldset)
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
int ret;
/* Whee! Actually deliver the signal. */
if (TRAP(regs) == 0x0C00)
syscall_restart(regs, &ka);
/*
* Reenable the DABR before delivering the signal to
* user space. The DABR will have been cleared if it
* triggered inside the kernel.
*/
if (current->thread.dabr)
set_dabr(current->thread.dabr);
ret = handle_signal(signr, &ka, &info, oldset, regs);
/* If a signal was successfully delivered, the saved sigmask is in
its frame, and we can clear the TIF_RESTORE_SIGMASK flag */
if (ret && test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
return ret;
}
if (TRAP(regs) == 0x0C00) { /* System Call! */
if ((int)regs->result == -ERESTARTNOHAND ||
(int)regs->result == -ERESTARTSYS ||
(int)regs->result == -ERESTARTNOINTR) {
regs->gpr[3] = regs->orig_gpr3;
regs->nip -= 4; /* Back up & retry system call */
regs->result = 0;
} else if ((int)regs->result == -ERESTART_RESTARTBLOCK) {
regs->gpr[0] = __NR_restart_syscall;
regs->nip -= 4;
regs->result = 0;
}
}
/* No signal to deliver -- put the saved sigmask back */
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
return 0;
}
static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
{
struct k_sigaction ka;
int restart_syscall;
sigset_t *oldset;
siginfo_t info;
int signr;
if (pt_regs_is_syscall(regs) &&
(regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)))
regs->u_regs[UREG_G6] = orig_i0;
if (current_thread_info()->status & TS_RESTORE_SIGMASK)
oldset = ¤t->saved_sigmask;
else
oldset = ¤t->blocked;
#ifdef CONFIG_COMPAT
if (test_thread_flag(TIF_32BIT)) {
extern void do_signal32(sigset_t *, struct pt_regs *);
do_signal32(oldset, regs);
return;
}
#endif
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
restart_syscall = 0;
if (pt_regs_is_syscall(regs) &&
(regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
restart_syscall = 1;
orig_i0 = regs->u_regs[UREG_G6];
}
if (signr > 0) {
if (restart_syscall)
syscall_restart(orig_i0, regs, &ka.sa);
if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
}
return;
}
if (restart_syscall &&
(regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
regs->u_regs[UREG_I0] == ERESTARTSYS ||
regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
regs->u_regs[UREG_I0] = orig_i0;
regs->tpc -= 4;
regs->tnpc -= 4;
pt_regs_clear_syscall(regs);
}
if (restart_syscall &&
regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
regs->u_regs[UREG_G1] = __NR_restart_syscall;
regs->tpc -= 4;
regs->tnpc -= 4;
pt_regs_clear_syscall(regs);
}
if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
set_current_blocked(¤t->saved_sigmask);
}
}
asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs)
{
struct k_sigaction *ka;
siginfo_t info;
if (!oldset)
oldset = ¤t->blocked;
for (;;) {
unsigned long signr;
spin_lock_irq(¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq(¤t->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = ¤t->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sigaddset(¤t->pending.signal, signr);
recalc_sigpending(current);
current->flags |= PF_SIGNALED;
do_exit(exit_code);
/* NOTREACHED */
}
}
if (regs->regs[0])
syscall_restart(regs, ka);
/* Whee! Actually deliver the signal. */
handle_signal(signr, ka, &info, oldset, regs);
return 1;
}
/*
* Who's code doesn't conform to the restartable syscall convention
* dies here!!! The li instruction, a single machine instruction,
* must directly be followed by the syscall instruction.
*/
if (regs->regs[0]) {
if (regs->regs[2] == ERESTARTNOHAND ||
regs->regs[2] == ERESTARTSYS ||
regs->regs[2] == ERESTARTNOINTR) {
regs->cp0_epc -= 8;
}
}
return 0;
}
/* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
{
struct k_sigaction ka;
int restart_syscall;
sigset_t *oldset = sigmask_to_save();
siginfo_t info;
int signr;
/* It's a lot of work and synchronization to add a new ptrace
* register for GDB to save and restore in order to get
* orig_i0 correct for syscall restarts when debugging.
*
* Although it should be the case that most of the global
* registers are volatile across a system call, glibc already
* depends upon that fact that we preserve them. So we can't
* just use any global register to save away the orig_i0 value.
*
* In particular %g2, %g3, %g4, and %g5 are all assumed to be
* preserved across a system call trap by various pieces of
* code in glibc.
*
* %g7 is used as the "thread register". %g6 is not used in
* any fixed manner. %g6 is used as a scratch register and
* a compiler temporary, but it's value is never used across
* a system call. Therefore %g6 is usable for orig_i0 storage.
*/
if (pt_regs_is_syscall(regs) &&
(regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)))
regs->u_regs[UREG_G6] = orig_i0;
#ifdef CONFIG_COMPAT
if (test_thread_flag(TIF_32BIT)) {
extern void do_signal32(sigset_t *, struct pt_regs *);
do_signal32(oldset, regs);
return;
}
#endif
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
restart_syscall = 0;
if (pt_regs_is_syscall(regs) &&
(regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
restart_syscall = 1;
orig_i0 = regs->u_regs[UREG_G6];
}
if (signr > 0) {
if (restart_syscall)
syscall_restart(orig_i0, regs, &ka.sa);
handle_signal(signr, &ka, &info, oldset, regs);
return;
}
if (restart_syscall &&
(regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
regs->u_regs[UREG_I0] == ERESTARTSYS ||
regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
/* replay the system call when we are done */
regs->u_regs[UREG_I0] = orig_i0;
regs->tpc -= 4;
regs->tnpc -= 4;
pt_regs_clear_syscall(regs);
}
if (restart_syscall &&
regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
regs->u_regs[UREG_G1] = __NR_restart_syscall;
regs->tpc -= 4;
regs->tnpc -= 4;
pt_regs_clear_syscall(regs);
}
/* If there's no signal to deliver, we just put the saved sigmask
* back
*/
restore_saved_sigmask();
}
/* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
asmlinkage int do_signal(sigset_t *oldset, struct pt_regs * regs,
unsigned long orig_i0, int restart_syscall)
{
unsigned long signr;
siginfo_t info;
struct k_sigaction *ka;
if (!oldset)
oldset = ¤t->blocked;
#ifdef CONFIG_SPARC32_COMPAT
if (current->thread.flags & SPARC_FLAG_32BIT) {
extern asmlinkage int do_signal32(sigset_t *, struct pt_regs *,
unsigned long, int);
return do_signal32(oldset, regs, orig_i0, restart_syscall);
}
#endif
for (;;) {
spin_lock_irq(¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq(¤t->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Do the syscall restart before we let the debugger
* look at the child registers.
*/
if (restart_syscall &&
(regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
regs->u_regs[UREG_I0] == ERESTARTSYS ||
regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
regs->u_regs[UREG_I0] = orig_i0;
regs->tpc -= 4;
regs->tnpc -= 4;
restart_syscall = 0;
}
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = ¤t->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* sys_wait4() grabs the master kernel lock, so
* we need not do so, that sucker should be
* threaded and would not be that difficult to
* do anyways.
*/
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
unsigned long exit_code = signr;
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
case SIGSTOP:
if (current->ptrace & PT_PTRACED)
continue;
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags &
SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
#ifdef DEBUG_SIGNALS
/* Very useful to debug the dynamic linker */
printk ("Sig %d going...\n", (int)signr);
show_regs (regs);
#ifdef DEBUG_SIGNALS_TRACE
{
struct reg_window *rw = (struct reg_window *)(regs->u_regs[UREG_FP] + STACK_BIAS);
unsigned long ins[8];
while (rw &&
!(((unsigned long) rw) & 0x3)) {
copy_from_user(ins, &rw->ins[0], sizeof(ins));
printk("Caller[%016lx](%016lx,%016lx,%016lx,%016lx,%016lx,%016lx)\n", ins[7], ins[0], ins[1], ins[2], ins[3], ins[4], ins[5]);
rw = (struct reg_window *)(unsigned long)(ins[6] + STACK_BIAS);
}
}
#endif
#ifdef DEBUG_SIGNALS_MAPS
printk("Maps:\n");
read_maps();
#endif
#endif
/* fall through */
default:
sig_exit(signr, exit_code, &info);
/* NOT REACHED */
}
}
if (restart_syscall)
syscall_restart(orig_i0, regs, &ka->sa);
handle_signal(signr, ka, &info, oldset, regs);
return 1;
}
if (restart_syscall &&
(regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
regs->u_regs[UREG_I0] == ERESTARTSYS ||
regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
/* replay the system call when we are done */
regs->u_regs[UREG_I0] = orig_i0;
regs->tpc -= 4;
regs->tnpc -= 4;
}
return 0;
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*
* "r0" and "r19" are the registers we need to restore for system call
* restart. "r0" is also used as an indicator whether we can restart at
* all (if we get here from anything but a syscall return, it will be 0)
*/
asmlinkage int
do_signal(sigset_t *oldset, struct pt_regs * regs, struct switch_stack * sw,
unsigned long r0, unsigned long r19)
{
unsigned long single_stepping = ptrace_cancel_bpt(current);
if (!oldset)
oldset = ¤t->blocked;
while (1) {
unsigned long signr;
struct k_sigaction *ka;
siginfo_t info;
spin_lock_irq(¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq(¤t->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
single_stepping |= ptrace_cancel_bpt(current);
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = ¤t->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr & 0x7f;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT:
case SIGCHLD:
case SIGWINCH:
continue;
case SIGTSTP:
case SIGTTIN:
case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1]
.sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
single_stepping |= ptrace_cancel_bpt(current);
continue;
case SIGQUIT:
case SIGILL:
case SIGTRAP:
case SIGABRT:
case SIGFPE:
case SIGSEGV:
case SIGBUS:
case SIGSYS:
case SIGXCPU:
case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
lock_kernel();
sigaddset(¤t->pending.signal, signr);
current->flags |= PF_SIGNALED;
do_exit(exit_code);
/* NOTREACHED */
}
continue;
}
/* Whee! Actually deliver the signal. */
if (r0) syscall_restart(r0, r19, regs, ka);
handle_signal(signr, ka, &info, oldset, regs, sw);
if (single_stepping)
ptrace_set_bpt(current); /* re-set bpt */
return 1;
}
if (r0 &&
(regs->r0 == ERESTARTNOHAND ||
regs->r0 == ERESTARTSYS ||
regs->r0 == ERESTARTNOINTR)) {
regs->r0 = r0; /* reset v0 and a3 and replay syscall */
regs->r19 = r19;
regs->pc -= 4;
}
if (single_stepping)
ptrace_set_bpt(current); /* re-set breakpoint */
return 0;
}
