/**
* suspend_enter - enter the desired system sleep state.
* @state: state to enter
*
* This function should be called after devices have been suspended.
*/
static int suspend_enter(suspend_state_t state)
{
int error;
if (suspend_ops->prepare) {
error = suspend_ops->prepare();
if (error)
return error;
}
error = dpm_suspend_noirq(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
goto Platfrom_finish;
}
if (suspend_ops->prepare_late) {
error = suspend_ops->prepare_late();
if (error)
goto Power_up_devices;
}
if (suspend_test(TEST_PLATFORM))
goto Platform_wake;
error = disable_nonboot_cpus();
if (error || suspend_test(TEST_CPUS))
goto Enable_cpus;
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
error = sysdev_suspend(PMSG_SUSPEND);
if (!error) {
if (!suspend_test(TEST_CORE) && pm_check_wakeup_events()) {
error = suspend_ops->enter(state);
events_check_enabled = false;
}
sysdev_resume();
}
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());
Enable_cpus:
enable_nonboot_cpus();
Platform_wake:
if (suspend_ops->wake)
suspend_ops->wake();
Power_up_devices:
dpm_resume_noirq(PMSG_RESUME);
Platfrom_finish:
if (suspend_ops->finish)
suspend_ops->finish();
return error;
}
static int _suspend_enter(suspend_state_t state)
{
int error = 0;
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
if ((error = device_power_down(PMSG_SUSPEND))) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
goto Done;
}
error = sysdev_suspend(PMSG_SUSPEND);
if (!error) {
if (!suspend_test(TEST_CORE))
error = suspend_ops->enter(state);
sysdev_resume();
}
device_power_up(PMSG_RESUME);
Done:
#ifdef CONFIG_QUICK_WAKEUP
quickwakeup_check();
#endif
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());
return error;
}
/**
* suspend_enter - enter the desired system sleep state.
* @state: state to enter
*
* This function should be called after devices have been suspended.
*/
static int suspend_enter(suspend_state_t state)
{
int error = 0;
device_pm_lock();
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
if ((error = device_power_down(PMSG_SUSPEND))) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
goto Done;
}
error = sysdev_suspend(PMSG_SUSPEND);
if (!error) {
if (!suspend_test(TEST_CORE))
error = suspend_ops->enter(state);
sysdev_resume();
}
device_power_up(PMSG_RESUME);
Done:
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());
device_pm_unlock();
return error;
}
/**
* suspend_enter - enter the desired system sleep state.
* @state: state to enter
*
* This function should be called after devices have been suspended.
*/
static int suspend_enter(suspend_state_t state)
{
int error;
if (suspend_ops->prepare) {
error = suspend_ops->prepare();
if (error)
return error;
}
error = dpm_suspend_noirq(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
goto Platfrom_finish;
}
if (suspend_ops->prepare_late) {
error = suspend_ops->prepare_late();
if (error)
goto Power_up_devices;
}
if (suspend_test(TEST_PLATFORM))
goto Platform_wake;
error = disable_nonboot_cpus();
if (error || suspend_test(TEST_CPUS))
goto Enable_cpus;
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
error = sysdev_suspend(PMSG_SUSPEND);
if (!error) {
//Check there is no NIRQ1 wakeup event before going in suspend
if (!suspend_test(TEST_CORE) && !(omap_readl(0x4A10019C)&0x80000000) )
error = suspend_ops->enter(state);
sysdev_resume();
}
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());
Enable_cpus:
enable_nonboot_cpus();
Platform_wake:
if (suspend_ops->wake)
suspend_ops->wake();
Power_up_devices:
dpm_resume_noirq(PMSG_RESUME);
Platfrom_finish:
if (suspend_ops->finish)
suspend_ops->finish();
return error;
}
static int _suspend_enter(suspend_state_t state)
{
int error;
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
error = sysdev_suspend(PMSG_SUSPEND);
if (!error) {
if (!suspend_test(TEST_CORE))
error = suspend_ops->enter(state);
sysdev_resume();
}
if (!error) {
#ifdef CONFIG_QUICK_WAKEUP
quickwakeup_check();
#endif
}
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());
return error;
}
static int xen_suspend(void *data)
{
int *cancelled = data;
int err;
BUG_ON(!irqs_disabled());
err = sysdev_suspend(PMSG_SUSPEND);
if (err) {
printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n",
err);
return err;
}
xen_mm_pin_all();
gnttab_suspend();
xen_pre_suspend();
/*
* This hypercall returns 1 if suspend was cancelled
* or the domain was merely checkpointed, and 0 if it
* is resuming in a new domain.
*/
*cancelled = HYPERVISOR_suspend(virt_to_mfn(xen_start_info));
xen_post_suspend(*cancelled);
gnttab_resume();
xen_mm_unpin_all();
if (!*cancelled) {
xen_irq_resume();
xen_console_resume();
xen_timer_resume();
}
syscore_resume();
sysdev_resume();
return 0;
}
/**
* suspend_enter - enter the desired system sleep state.
* @state: state to enter
*
* This function should be called after devices have been suspended.
*/
#ifdef CONFIG_CPU_FREQ
static char governor_name[CPUFREQ_NAME_LEN];
static char userspace_governor[CPUFREQ_NAME_LEN] = "userspace";
#endif /* CONFIG_CPU_FREQ */
static int suspend_enter(suspend_state_t state)
{
int error = 0;
device_pm_lock();
#ifdef CONFIG_CPU_FREQ
cpufreq_get_cpufreq_name(0);
strcpy(governor_name, cpufreq_governor_name);
if(strnicmp(governor_name, userspace_governor, CPUFREQ_NAME_LEN)) {
cpufreq_set_policy(0, "performance");
}
#endif /* CONFIG_CPU_FREQ */
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
if ((error = device_power_down(PMSG_SUSPEND))) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
goto Done;
}
error = sysdev_suspend(PMSG_SUSPEND);
if (!error) {
if (!suspend_test(TEST_CORE))
error = suspend_ops->enter(state);
sysdev_resume();
}
device_power_up(PMSG_RESUME);
Done:
arch_suspend_enable_irqs();
#ifdef CONFIG_CPU_FREQ
if(strnicmp(governor_name, userspace_governor, CPUFREQ_NAME_LEN)) {
cpufreq_set_policy(0, governor_name);
}
#endif /* CONFIG_CPU_FREQ */
BUG_ON(irqs_disabled());
device_pm_unlock();
return error;
}
static int xen_suspend(void *data)
{
struct suspend_info *si = data;
int err;
BUG_ON(!irqs_disabled());
err = sysdev_suspend(PMSG_FREEZE);
if (err) {
printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n",
err);
return err;
}
if (si->pre)
si->pre();
/*
* This hypercall returns 1 if suspend was cancelled
* or the domain was merely checkpointed, and 0 if it
* is resuming in a new domain.
*/
si->cancelled = HYPERVISOR_suspend(si->arg);
if (si->post)
si->post(si->cancelled);
if (!si->cancelled) {
xen_irq_resume();
xen_console_resume();
xen_timer_resume();
}
sysdev_resume();
return 0;
}
int hibernation_platform_enter(void)
{
int error;
gfp_t saved_mask;
if (!hibernation_ops)
return -ENOSYS;
/*
* We have cancelled the power transition by running
* hibernation_ops->finish() before saving the image, so we should let
* the firmware know that we're going to enter the sleep state after all
*/
error = hibernation_ops->begin();
if (error)
goto Close;
entering_platform_hibernation = true;
suspend_console();
saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
error = dpm_suspend_start(PMSG_HIBERNATE);
if (error) {
if (hibernation_ops->recover)
hibernation_ops->recover();
goto Resume_devices;
}
error = dpm_suspend_noirq(PMSG_HIBERNATE);
if (error)
goto Resume_devices;
error = hibernation_ops->prepare();
if (error)
goto Platform_finish;
error = disable_nonboot_cpus();
if (error)
goto Platform_finish;
local_irq_disable();
sysdev_suspend(PMSG_HIBERNATE);
if (!pm_check_wakeup_events()) {
error = -EAGAIN;
goto Power_up;
}
hibernation_ops->enter();
/* We should never get here */
while (1);
Power_up:
sysdev_resume();
local_irq_enable();
enable_nonboot_cpus();
Platform_finish:
hibernation_ops->finish();
dpm_suspend_noirq(PMSG_RESTORE);
Resume_devices:
entering_platform_hibernation = false;
dpm_resume_end(PMSG_RESTORE);
set_gfp_allowed_mask(saved_mask);
resume_console();
Close:
hibernation_ops->end();
return error;
}
/**
* hom_freeze_devices_and_enter -
* freeze devices and enter in hibernation on memory
*/
static int hibernation_on_memory_enter(void)
{
int error = 0;
unsigned long pe_counter;
if (!hom_ops)
return -ENOSYS;
pr_debug("[STM]:[PM]: platform_begin\n");
error = platform_begin();
if (error)
goto Close;
suspend_console();
pr_debug("[STM]:[PM]: Suspend devices\n");
error = dpm_suspend_start(PMSG_FREEZE);
if (error)
goto Resume_devices;
pr_debug("[STM]:[PM]: Suspend devices (noirq)\n");
error = dpm_suspend_noirq(PMSG_FREEZE);
if (error)
goto Resume_devices_noirq;
error = disable_nonboot_cpus();
if (error)
goto Enable_cpus;
local_irq_disable();
pr_debug("[STM]:[PM]: Suspend sysdevices\n");
error = sysdev_suspend(PMSG_FREEZE);
if (error)
goto Enable_irqs;
pr_debug("[STM]:[PM]: platform_prepare\n");
error = platform_prepare();
if (error) {
pr_err("[STM]:[PM]: platform_prepare has refused the HoM\n");
goto Skip_enter;
}
pr_debug("[STM]:[PM]: platform_enter\n");
pe_counter = preempt_count();
platform_enter();
BUG_ON(pe_counter != preempt_count());
Skip_enter:
pr_debug("[STM]:[PM]: platform_complete\n");
platform_complete();
pr_debug("[STM]:[PM]: Resumed sysdevices\n");
sysdev_resume();
Enable_irqs:
local_irq_enable();
Enable_cpus:
enable_nonboot_cpus();
Resume_devices_noirq:
pr_debug("[STM]:[PM]: Resume devices (noirq)\n");
dpm_resume_noirq(PMSG_RESTORE);
Resume_devices:
pr_debug("[STM]:[PM]: Resume devices\n");
dpm_resume_end(PMSG_RESTORE);
resume_console();
Close:
pr_debug("[STM]:[PM]: platform_end\n");
platform_end();
pr_debug("[STM]:[PM]: exit\n");
return error;
}
static int create_image(int platform_mode)
{
int error;
error = arch_prepare_suspend();
if (error)
return error;
/* At this point, dpm_suspend_start() has been called, but *not*
* dpm_suspend_noirq(). We *must* call dpm_suspend_noirq() now.
* Otherwise, drivers for some devices (e.g. interrupt controllers)
* become desynchronized with the actual state of the hardware
* at resume time, and evil weirdness ensues.
*/
error = dpm_suspend_noirq(PMSG_FREEZE);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down, "
"aborting hibernation\n");
return error;
}
error = platform_pre_snapshot(platform_mode);
if (error || hibernation_test(TEST_PLATFORM))
goto Platform_finish;
error = disable_nonboot_cpus();
if (error || hibernation_test(TEST_CPUS)
|| hibernation_testmode(HIBERNATION_TEST))
goto Enable_cpus;
local_irq_disable();
error = sysdev_suspend(PMSG_FREEZE);
if (error) {
printk(KERN_ERR "PM: Some system devices failed to power down, "
"aborting hibernation\n");
goto Enable_irqs;
}
if (hibernation_test(TEST_CORE) || !pm_check_wakeup_events())
goto Power_up;
in_suspend = 1;
save_processor_state();
error = swsusp_arch_suspend();
if (error)
printk(KERN_ERR "PM: Error %d creating hibernation image\n",
error);
/* Restore control flow magically appears here */
restore_processor_state();
if (!in_suspend) {
events_check_enabled = false;
platform_leave(platform_mode);
}
Power_up:
sysdev_resume();
/* NOTE: dpm_resume_noirq() is just a resume() for devices
* that suspended with irqs off ... no overall powerup.
*/
Enable_irqs:
local_irq_enable();
Enable_cpus:
enable_nonboot_cpus();
Platform_finish:
platform_finish(platform_mode);
dpm_resume_noirq(in_suspend ?
(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
return error;
}
static int resume_target_kernel(bool platform_mode)
{
int error;
error = dpm_suspend_noirq(PMSG_QUIESCE);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down, "
"aborting resume\n");
return error;
}
error = platform_pre_restore(platform_mode);
if (error)
goto Cleanup;
error = disable_nonboot_cpus();
if (error)
goto Enable_cpus;
local_irq_disable();
error = sysdev_suspend(PMSG_QUIESCE);
if (error)
goto Enable_irqs;
/* We'll ignore saved state, but this gets preempt count (etc) right */
save_processor_state();
error = restore_highmem();
if (!error) {
error = swsusp_arch_resume();
/*
* The code below is only ever reached in case of a failure.
* Otherwise execution continues at place where
* swsusp_arch_suspend() was called
*/
BUG_ON(!error);
/* This call to restore_highmem() undos the previous one */
restore_highmem();
}
/*
* The only reason why swsusp_arch_resume() can fail is memory being
* very tight, so we have to free it as soon as we can to avoid
* subsequent failures
*/
swsusp_free();
restore_processor_state();
touch_softlockup_watchdog();
sysdev_resume();
Enable_irqs:
local_irq_enable();
Enable_cpus:
enable_nonboot_cpus();
Cleanup:
platform_restore_cleanup(platform_mode);
dpm_resume_noirq(PMSG_RECOVER);
return error;
}
/**
* suspend_enter - enter the desired system sleep state.
* @state: state to enter
*
* This function should be called after devices have been suspended.
*/
static int suspend_enter(suspend_state_t state)
{
int error;
if (suspend_ops->prepare) {
error = suspend_ops->prepare();
if (error)
return error;
}
error = dpm_suspend_noirq(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
goto Platfrom_finish;
}
if (suspend_ops->prepare_late) {
error = suspend_ops->prepare_late();
if (error)
goto Power_up_devices;
}
if (suspend_test(TEST_PLATFORM))
goto Platform_wake;
error = disable_nonboot_cpus();
if (error || suspend_test(TEST_CPUS))
goto Enable_cpus;
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
error = sysdev_suspend(PMSG_SUSPEND);
if (!error) {
if (!suspend_test(TEST_CORE))
error = suspend_ops->enter(state);
// LGE_UPDATE_S
#if defined(CONFIG_WAKE_IRQ_PRINT)
wakeup_irq_record_reset();
#endif
// LGE_UPDATE_E
sysdev_resume();
}
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());
Enable_cpus:
enable_nonboot_cpus();
Platform_wake:
if (suspend_ops->wake)
suspend_ops->wake();
Power_up_devices:
dpm_resume_noirq(PMSG_RESUME);
Platfrom_finish:
if (suspend_ops->finish)
suspend_ops->finish();
return error;
}
/**
* suspend_enter - enter the desired system sleep state.
* @state: state to enter
*
* This function should be called after devices have been suspended.
*/
static int suspend_enter(suspend_state_t state)
{
int error;
if (suspend_ops->prepare) {
error = suspend_ops->prepare();
if (error)
return error;
}
#ifdef DEVICE_SUPPORT_SUSPEND_NO_IRQ
error = dpm_suspend_noirq(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
goto Platfrom_finish;
}
#endif
if (suspend_ops->prepare_late) {
error = suspend_ops->prepare_late();
if (error)
goto Power_up_devices;
}
if (suspend_test(TEST_PLATFORM))
goto Platform_wake;
error = disable_nonboot_cpus();
if (error || suspend_test(TEST_CPUS))
goto Enable_cpus;
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
error = sysdev_suspend(PMSG_SUSPEND);
if (!error) {
if (!suspend_test(TEST_CORE))
error = suspend_ops->enter(state);
sysdev_resume();
}
#ifdef CONFIG_SCREEN_ON_EARLY
if(check_power_key_pressing()){
amvideo_class_resume_early();
vout_pll_resume_early();
osd_resume_early();
resume_vout_early();
}
#endif
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());
Enable_cpus:
enable_nonboot_cpus();
Platform_wake:
if (suspend_ops->wake)
suspend_ops->wake();
Power_up_devices:
#ifdef DEVICE_SUPPORT_SUSPEND_NO_IRQ
dpm_resume_noirq(PMSG_RESUME);
#endif
Platfrom_finish:
if (suspend_ops->finish)
suspend_ops->finish();
return error;
}
/**
* suspend_enter - enter the desired system sleep state.
* @state: state to enter
*
* This function should be called after devices have been suspended.
*/
static int suspend_enter(suspend_state_t state)
{
int error;
if (suspend_ops->prepare) {
error = suspend_ops->prepare();
if (error)
return error;
}
error = dpm_suspend_noirq(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
goto Platfrom_finish;
}
if (suspend_ops->prepare_late) {
error = suspend_ops->prepare_late();
if (error)
goto Power_up_devices;
}
if (suspend_test(TEST_PLATFORM))
goto Platform_wake;
error = disable_nonboot_cpus();
if (error || suspend_test(TEST_CPUS))
goto Enable_cpus;
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
error = sysdev_suspend(PMSG_SUSPEND);
if (!error) {
if (!suspend_test(TEST_CORE))
error = suspend_ops->enter(state);
/* Workaround for possible L2 cache coherency issue
where preempt_count remains zero */
preempt_count() = 0;
sysdev_resume();
}
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());
Enable_cpus:
enable_nonboot_cpus();
Platform_wake:
if (suspend_ops->wake)
suspend_ops->wake();
Power_up_devices:
dpm_resume_noirq(PMSG_RESUME);
Platfrom_finish:
if (suspend_ops->finish)
suspend_ops->finish();
return error;
}
int hibernation_platform_enter(void)
{
int error;
if (!hibernation_ops)
return -ENOSYS;
/*
* We have cancelled the power transition by running
* hibernation_ops->finish() before saving the image, so we should let
* the firmware know that we're going to enter the sleep state after all
*/
error = hibernation_ops->begin();
if (error)
goto Close;
entering_platform_hibernation = true;
suspend_console();
error = dpm_suspend_start(PMSG_HIBERNATE);
if (error) {
if (hibernation_ops->recover)
hibernation_ops->recover();
goto Resume_devices;
}
error = dpm_suspend_noirq(PMSG_HIBERNATE);
if (error)
goto Resume_devices;
error = hibernation_ops->prepare();
if (error)
goto Platofrm_finish;
error = disable_nonboot_cpus();
if (error)
goto Platofrm_finish;
local_irq_disable();
sysdev_suspend(PMSG_HIBERNATE);
hibernation_ops->enter();
/* We should never get here */
while (1);
/*
* We don't need to reenable the nonboot CPUs or resume consoles, since
* the system is going to be halted anyway.
*/
Platofrm_finish:
hibernation_ops->finish();
dpm_suspend_noirq(PMSG_RESTORE);
Resume_devices:
entering_platform_hibernation = false;
dpm_resume_end(PMSG_RESTORE);
resume_console();
Close:
hibernation_ops->end();
return error;
}
/**
* suspend_enter - enter the desired system sleep state.
* @state: state to enter
*
* This function should be called after devices have been suspended.
*/
static int suspend_enter(suspend_state_t state)
{
int error;
if (suspend_ops->prepare) {
error = suspend_ops->prepare();
if (error)
goto Platform_finish;
}
error = dpm_suspend_noirq(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
goto Platform_finish;
}
if (suspend_ops->prepare_late) {
error = suspend_ops->prepare_late();
if (error)
goto Platform_wake;
}
if (suspend_test(TEST_PLATFORM))
goto Platform_wake;
error = disable_nonboot_cpus();
if (error || suspend_test(TEST_CPUS))
goto Enable_cpus;
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
error = sysdev_suspend(PMSG_SUSPEND);
if (!error) {
if (!suspend_test(TEST_CORE) && pm_check_wakeup_events()) {
error = suspend_ops->enter(state);
rtc_resume_fromtime=tegra_rtc_read_ms();
events_check_enabled = false;
}
sysdev_resume();
}
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());
Enable_cpus:
enable_nonboot_cpus();
rtc_resume_endtime=tegra_rtc_read_ms();
printk(KERN_ERR "<POWER>resume2[Enable CPU]take %llu ms\n",rtc_resume_endtime-rtc_resume_fromtime);
rtc_resume_fromtime=rtc_resume_endtime;
Platform_wake:
if (suspend_ops->wake)
suspend_ops->wake();
rtc_resume_endtime=tegra_rtc_read_ms();
printk(KERN_ERR "<POWER>resume3[CPU suspend_ops->wake]take %llu ms\n",rtc_resume_endtime-rtc_resume_fromtime);
ktime_resume_fromtime=ktime_get();
dpm_resume_noirq(PMSG_RESUME);
ktime_resume_endtime=ktime_get();
printk(KERN_ERR "<POWER>resume4[CPU resume_noirq]take %llu ns\n",ktime_to_ns(ktime_sub(ktime_resume_endtime, ktime_resume_fromtime)));
ktime_resume_fromtime=ktime_resume_endtime;
Platform_finish:
if (suspend_ops->finish)
suspend_ops->finish();
ktime_resume_endtime=ktime_get();
printk(KERN_ERR "<POWER>resume5[CPU suspend_ops->finish]take %llu ns\n",ktime_to_ns(ktime_sub(ktime_resume_endtime, ktime_resume_fromtime)));
ktime_resume_fromtime=ktime_resume_endtime;
return error;
}
/**
* suspend_enter - enter the desired system sleep state.
* @state: state to enter
*
* This function should be called after devices have been suspended.
*/
static int suspend_enter(suspend_state_t state)
{
int error;
/*
#ifdef CONFIG_CPU_FREQ
dvfs_set_max_freq_lock();
#endif */ /* CONFIG_CPU_FREQ */
if (suspend_ops->prepare) {
error = suspend_ops->prepare();
if (error)
return error;
}
error = dpm_suspend_noirq(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
goto Platfrom_finish;
}
if (suspend_ops->prepare_late) {
error = suspend_ops->prepare_late();
if (error)
goto Power_up_devices;
}
if (suspend_test(TEST_PLATFORM))
goto Platform_wake;
error = disable_nonboot_cpus();
if (error || suspend_test(TEST_CPUS))
goto Enable_cpus;
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
error = sysdev_suspend(PMSG_SUSPEND);
if (!error) {
if (!suspend_test(TEST_CORE))
error = suspend_ops->enter(state);
sysdev_resume();
}
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());
/*#ifdef CONFIG_CPU_FREQ
dvfs_set_max_freq_unlock();
#endif*/ /* CONFIG_CPU_FREQ */
Enable_cpus:
enable_nonboot_cpus();
Platform_wake:
if (suspend_ops->wake)
suspend_ops->wake();
Power_up_devices:
dpm_resume_noirq(PMSG_RESUME);
Platfrom_finish:
if (suspend_ops->finish)
suspend_ops->finish();
return error;
}
/**
* suspend_enter - enter the desired system sleep state.
* @state: state to enter
*
* This function should be called after devices have been suspended.
*/
static int suspend_enter(suspend_state_t state)
{
int error;
if (suspend_ops->prepare) {
error = suspend_ops->prepare();
if (error)
return error;
}
error = dpm_suspend_noirq(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
goto Platfrom_finish;
}
if (suspend_ops->prepare_late) {
error = suspend_ops->prepare_late();
if (error)
goto Power_up_devices;
}
if (suspend_test(TEST_PLATFORM))
goto Platform_wake;
error = disable_nonboot_cpus();
if (error || suspend_test(TEST_CPUS))
goto Enable_cpus;
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
error = sysdev_suspend(PMSG_SUSPEND);
if (!error) {
if (!suspend_test(TEST_CORE))
error = suspend_ops->enter(state);
//20110727 [email protected] Patch applied from P990 froyo MR-03
printk("# AP20 chip wakeup \n");
star_emergency_restart("sys",62);
sysdev_resume();
}
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());
Enable_cpus:
enable_nonboot_cpus();
Platform_wake:
if (suspend_ops->wake)
suspend_ops->wake();
Power_up_devices:
dpm_resume_noirq(PMSG_RESUME);
Platfrom_finish:
if (suspend_ops->finish)
suspend_ops->finish();
return error;
}
