示例#1
0
/*	create an UDP socket
	Inputs:
		<ip> the IP address is associated with
		<port> the port #
	Outputs:
		<addr_in> the info of the socket
	Return:
		the socket
*/
static int
udp_open_socket(unsigned int ip, int port, struct sockaddr_in *addr_in)
{
	int fd;

	fd = (int) socket (AF_INET, SOCK_DGRAM, IPPROTO_UDP);
	if (fd > 0)
	{

		if (ip==0) ip = INADDR_ANY;
		memset(addr_in, 0, sizeof(struct sockaddr_in));
		addr_in->sin_family = AF_INET;
		addr_in->sin_port	= htons((u_short) port);
		addr_in->sin_addr.s_addr = ip;
		tcp_set_nonblocking(fd);
//		tcp_set_keepalive(fd,1);

#if 0
		{
		int on = 1;
		setsockopt( fd, SOL_SOCKET, SO_REUSEPORT, (char *) &on, sizeof(on) );
		}
#endif
	}
	return fd;
}
示例#2
0
/* create a nonblocking and keepalive socket 
	Returns:
		-1 on failure, otherwise the socket
*/
static int
tcp_open_socket (int nonblocking)
{
    int fd, on=1;

    fd = (int) socket (AF_INET, SOCK_STREAM, 0);
    if (fd < 0)
	    return -1;
    if(nonblocking && tcp_set_nonblocking (fd))
    {
    	closesocket (fd);
	    return -1;
    }
    if(tcp_set_keepalive (fd,1) || 
       setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, (void*) & on, sizeof (on)) != 0)
    {
        closesocket (fd);
        return -1;
    }
    return fd;
}
示例#3
0
int tls_server_set_clientfd(tls_handle_t h, int clientfd)
{
	tls_session_t *s = (tls_session_t *) h;
	ASSERT((h != 0) && (clientfd >= 0));

	SSL_set_fd(s->ssl, clientfd);
#ifdef NO_PSK
#if !defined(NO_FILESYSTEM) && defined(OPENSSL_EXTRA)
	CyaSSL_SetTmpDH_file(s->ssl, dhParam, SSL_FILETYPE_PEM);
#else
	/* will repick suites with DHE, higher priority than PSK */
	SetDH(s->ssl);
#endif
#endif

#ifdef NON_BLOCKING
	tcp_set_nonblocking(&clientfd);
	NonBlockingSSL_Accept(s->ssl);
#else
#ifndef CYASSL_CALLBACKS
	if (SSL_accept(s->ssl) != SSL_SUCCESS) {
#ifdef CONFIG_ENABLE_ERROR_LOGS
		int err = SSL_get_error(s->ssl, 0);
		char buffer[80];
		tls_e("error = %d, %s", err, ERR_error_string(err, buffer));
		tls_e("Server: SSL_accept failed");
#endif /* CONFIG_ENABLE_ERROR_LOGS */
		SSL_free(s->ssl);
		SSL_CTX_free(s->ctx);
		return -WM_FAIL;
	}
#else
	NonBlockingSSL_Accept(s->ssl);
#endif
#endif
	showPeer(s->ssl);
	s->session_setup_done = true;
	return WM_SUCCESS;
}
示例#4
0
/*	accept a new tcp client connection 
	Inputs:
		<fd> the server listen socket
	Outputs:
		<port> the assigned port for this client
		<ip> the ip address of the client
	Returns:
		-1 on failure, otherwise the socket of the client
*/
int
tcp_accept_client(int sock, int *port, unsigned int *ip, int nonblocking)
{
	unsigned int sinsize;
	struct sockaddr_in sin;
	int fd;

	sinsize = sizeof (sin);
	fd = (int) accept (sock, (struct sockaddr *) &sin, &sinsize);
	if(fd > 0)
	{
		*port = ntohs(sin.sin_port);
		*ip = ntohl (sin.sin_addr.s_addr);
		tcp_set_keepalive(fd, 1);
		if(nonblocking && tcp_set_nonblocking (fd))
		{
			closesocket (fd);
			fd = -1;
		}
	}
	return fd;
}
示例#5
0
文件: client.c 项目: BrianAker/cyassl
THREAD_RETURN CYASSL_THREAD client_test(void* args)
{
    SOCKET_T sockfd = 0;

    CYASSL_METHOD*  method  = 0;
    CYASSL_CTX*     ctx     = 0;
    CYASSL*         ssl     = 0;
    
    CYASSL*         sslResume = 0;
    CYASSL_SESSION* session = 0;
    char         resumeMsg[] = "resuming cyassl!";
    int          resumeSz    = sizeof(resumeMsg);

    char msg[32] = "hello cyassl!";   /* GET may make bigger */
    char reply[80];
    int  input;
    int  msgSz = (int)strlen(msg);

    int   port   = yasslPort;
    char* host   = (char*)yasslIP;
    char* domain = (char*)"www.yassl.com";

    int    ch;
    int    version = CLIENT_INVALID_VERSION;
    int    usePsk   = 0;
    int    sendGET  = 0;
    int    benchmark = 0;
    int    doDTLS    = 0;
    int    matchName = 0;
    int    doPeerCheck = 1;
    int    nonBlocking = 0;
    int    resumeSession = 0;
    int    trackMemory   = 0;
    int    useClientCert = 1;
    int    fewerPackets  = 0;
    int    atomicUser    = 0;
    int    pkCallbacks   = 0;
    char*  cipherList = NULL;
    char*  verifyCert = (char*)caCert;
    char*  ourCert    = (char*)cliCert;
    char*  ourKey     = (char*)cliKey;

#ifdef HAVE_SNI
    char*  sniHostName = NULL;
#endif
#ifdef HAVE_MAX_FRAGMENT
    byte maxFragment = 0;
#endif
#ifdef HAVE_TRUNCATED_HMAC
    byte  truncatedHMAC = 0;
#endif


#ifdef HAVE_OCSP
    int    useOcsp  = 0;
    char*  ocspUrl  = NULL;
#endif

    int     argc = ((func_args*)args)->argc;
    char**  argv = ((func_args*)args)->argv;

    ((func_args*)args)->return_code = -1; /* error state */

#ifdef NO_RSA
    verifyCert = (char*)eccCert;
    ourCert    = (char*)cliEccCert;
    ourKey     = (char*)cliEccKey;
#endif
    (void)resumeSz;
    (void)session;
    (void)sslResume;
    (void)trackMemory;
    (void)atomicUser;
    (void)pkCallbacks;

    StackTrap();

    while ((ch = mygetopt(argc, argv,
                          "?gdusmNrtfxUPh:p:v:l:A:c:k:b:zS:L:ToO:")) != -1) {
        switch (ch) {
            case '?' :
                Usage();
                exit(EXIT_SUCCESS);

            case 'g' :
                sendGET = 1;
                break;

            case 'd' :
                doPeerCheck = 0;
                break;

            case 'u' :
                doDTLS  = 1;
                break;

            case 's' :
                usePsk = 1;
                break;

            case 't' :
            #ifdef USE_CYASSL_MEMORY
                trackMemory = 1;
            #endif
                break;

            case 'm' :
                matchName = 1;
                break;

            case 'x' :
                useClientCert = 0;
                break;

            case 'f' :
                fewerPackets = 1;
                break;

            case 'U' :
            #ifdef ATOMIC_USER
                atomicUser = 1;
            #endif
                break;

            case 'P' :
            #ifdef HAVE_PK_CALLBACKS 
                pkCallbacks = 1;
            #endif
                break;

            case 'h' :
                host   = myoptarg;
                domain = myoptarg;
                break;

            case 'p' :
                port = atoi(myoptarg);
                #if !defined(NO_MAIN_DRIVER) || defined(USE_WINDOWS_API)
                    if (port == 0)
                        err_sys("port number cannot be 0");
                #endif
                break;

            case 'v' :
                version = atoi(myoptarg);
                if (version < 0 || version > 3) {
                    Usage();
                    exit(MY_EX_USAGE);
                }
                break;

            case 'l' :
                cipherList = myoptarg;
                break;

            case 'A' :
                verifyCert = myoptarg;
                break;

            case 'c' :
                ourCert = myoptarg;
                break;

            case 'k' :
                ourKey = myoptarg;
                break;

            case 'b' :
                benchmark = atoi(myoptarg);
                if (benchmark < 0 || benchmark > 1000000) {
                    Usage();
                    exit(MY_EX_USAGE);
                }
                break;

            case 'N' :
                nonBlocking = 1;
                break;

            case 'r' :
                resumeSession = 1;
                break;

            case 'z' :
                #ifndef CYASSL_LEANPSK
                    CyaSSL_GetObjectSize();
                #endif
                break;

            case 'S' :
                #ifdef HAVE_SNI
                    sniHostName = myoptarg;
                #endif
                break;

            case 'L' :
                #ifdef HAVE_MAX_FRAGMENT
                    maxFragment = atoi(myoptarg);
                    if (maxFragment < CYASSL_MFL_2_9 ||
                                                maxFragment > CYASSL_MFL_2_13) {
                        Usage();
                        exit(MY_EX_USAGE);
                    }
                #endif
                break;

            case 'T' :
                #ifdef HAVE_TRUNCATED_HMAC
                    truncatedHMAC = 1;
                #endif
                break;

            case 'o' :
                #ifdef HAVE_OCSP
                    useOcsp = 1;
                #endif
                break;

            case 'O' :
                #ifdef HAVE_OCSP
                    useOcsp = 1;
                    ocspUrl = myoptarg;
                #endif
                break;

            default:
                Usage();
                exit(MY_EX_USAGE);
        }
    }

    myoptind = 0;      /* reset for test cases */

    /* sort out DTLS versus TLS versions */
    if (version == CLIENT_INVALID_VERSION) {
        if (doDTLS)
            version = CLIENT_DTLS_DEFAULT_VERSION;
        else
            version = CLIENT_DEFAULT_VERSION;
    }
    else {
        if (doDTLS) {
            if (version == 3)
                version = -2;
            else
                version = -1;
        }
    }

#ifdef USE_CYASSL_MEMORY
    if (trackMemory)
        InitMemoryTracker(); 
#endif

    switch (version) {
#ifndef NO_OLD_TLS
        case 0:
            method = CyaSSLv3_client_method();
            break;
                
                
    #ifndef NO_TLS
        case 1:
            method = CyaTLSv1_client_method();
            break;

        case 2:
            method = CyaTLSv1_1_client_method();
            break;
    #endif /* NO_TLS */
                
#endif  /* NO_OLD_TLS */
                
#ifndef NO_TLS
        case 3:
            method = CyaTLSv1_2_client_method();
            break;
#endif

#ifdef CYASSL_DTLS
        case -1:
            method = CyaDTLSv1_client_method();
            break;

        case -2:
            method = CyaDTLSv1_2_client_method();
            break;
#endif

        default:
            err_sys("Bad SSL version");
            break;
    }

    if (method == NULL)
        err_sys("unable to get method");

    ctx = CyaSSL_CTX_new(method);
    if (ctx == NULL)
        err_sys("unable to get ctx");

    if (cipherList)
        if (CyaSSL_CTX_set_cipher_list(ctx, cipherList) != SSL_SUCCESS)
            err_sys("client can't set cipher list 1");

#ifdef CYASSL_LEANPSK
    usePsk = 1;
#endif

#if defined(NO_RSA) && !defined(HAVE_ECC)
    usePsk = 1;
#endif

    if (fewerPackets)
        CyaSSL_CTX_set_group_messages(ctx);

    if (usePsk) {
#ifndef NO_PSK
        CyaSSL_CTX_set_psk_client_callback(ctx, my_psk_client_cb);
        if (cipherList == NULL) {
            const char *defaultCipherList;
            #ifdef HAVE_NULL_CIPHER
                defaultCipherList = "PSK-NULL-SHA256";
            #else
                defaultCipherList = "PSK-AES128-CBC-SHA256";
            #endif
            if (CyaSSL_CTX_set_cipher_list(ctx,defaultCipherList) !=SSL_SUCCESS)
                err_sys("client can't set cipher list 2");
        }
#endif
        useClientCert = 0;
    }

#ifdef OPENSSL_EXTRA
    CyaSSL_CTX_set_default_passwd_cb(ctx, PasswordCallBack);
#endif

#if defined(CYASSL_SNIFFER) && !defined(HAVE_NTRU) && !defined(HAVE_ECC)
    if (cipherList == NULL) {
        /* don't use EDH, can't sniff tmp keys */
        if (CyaSSL_CTX_set_cipher_list(ctx, "AES256-SHA256") != SSL_SUCCESS) {
            err_sys("client can't set cipher list 3");
        }
    }
#endif

#ifdef HAVE_OCSP
    if (useOcsp) {
        if (ocspUrl != NULL) {
            CyaSSL_CTX_SetOCSP_OverrideURL(ctx, ocspUrl);
            CyaSSL_CTX_EnableOCSP(ctx, CYASSL_OCSP_NO_NONCE
                                                    | CYASSL_OCSP_URL_OVERRIDE);
        }
        else
            CyaSSL_CTX_EnableOCSP(ctx, CYASSL_OCSP_NO_NONCE);
    }
#endif

#ifdef USER_CA_CB
    CyaSSL_CTX_SetCACb(ctx, CaCb);
#endif

#ifdef VERIFY_CALLBACK
    CyaSSL_CTX_set_verify(ctx, SSL_VERIFY_PEER, myVerify);
#endif
#if !defined(NO_FILESYSTEM) && !defined(NO_CERTS)
    if (useClientCert){
        if (CyaSSL_CTX_use_certificate_chain_file(ctx, ourCert) != SSL_SUCCESS)
            err_sys("can't load client cert file, check file and run from"
                    " CyaSSL home dir");

        if (CyaSSL_CTX_use_PrivateKey_file(ctx, ourKey, SSL_FILETYPE_PEM)
                                         != SSL_SUCCESS)
            err_sys("can't load client private key file, check file and run "
                    "from CyaSSL home dir");
    }

    if (!usePsk) {
        if (CyaSSL_CTX_load_verify_locations(ctx, verifyCert, 0) != SSL_SUCCESS)
                err_sys("can't load ca file, Please run from CyaSSL home dir");
    }
#endif
#if !defined(NO_CERTS)
    if (!usePsk && doPeerCheck == 0)
        CyaSSL_CTX_set_verify(ctx, SSL_VERIFY_NONE, 0);
#endif

#ifdef HAVE_CAVIUM
    CyaSSL_CTX_UseCavium(ctx, CAVIUM_DEV_ID);
#endif

#ifdef HAVE_SNI
    if (sniHostName)
        if (CyaSSL_CTX_UseSNI(ctx, 0, sniHostName, XSTRLEN(sniHostName))
                                                                 != SSL_SUCCESS)
            err_sys("UseSNI failed");
#endif
#ifdef HAVE_MAX_FRAGMENT
    if (maxFragment)
        if (CyaSSL_CTX_UseMaxFragment(ctx, maxFragment) != SSL_SUCCESS)
            err_sys("UseMaxFragment failed");
#endif
#ifdef HAVE_TRUNCATED_HMAC
    if (truncatedHMAC)
        if (CyaSSL_CTX_UseTruncatedHMAC(ctx) != SSL_SUCCESS)
            err_sys("UseTruncatedHMAC failed");
#endif

    if (benchmark) {
        /* time passed in number of connects give average */
        int times = benchmark;
        int i = 0;

        double start = current_time(), avg;

        for (i = 0; i < times; i++) {
            tcp_connect(&sockfd, host, port, doDTLS);

            ssl = CyaSSL_new(ctx);
            CyaSSL_set_fd(ssl, sockfd);
            if (CyaSSL_connect(ssl) != SSL_SUCCESS)
                err_sys("SSL_connect failed");

            CyaSSL_shutdown(ssl);
            CyaSSL_free(ssl);
            CloseSocket(sockfd);
        }
        avg = current_time() - start;
        avg /= times;
        avg *= 1000;   /* milliseconds */
        printf("CyaSSL_connect avg took: %8.3f milliseconds\n", avg);

        CyaSSL_CTX_free(ctx);
        ((func_args*)args)->return_code = 0;

        exit(EXIT_SUCCESS);
    }
    
    #if defined(CYASSL_MDK_ARM)
    CyaSSL_CTX_set_verify(ctx, SSL_VERIFY_NONE, 0);
    #endif
    
    ssl = CyaSSL_new(ctx);
    if (ssl == NULL)
        err_sys("unable to get SSL object");
    if (doDTLS) {
        SOCKADDR_IN_T addr;
        build_addr(&addr, host, port, 1);
        CyaSSL_dtls_set_peer(ssl, &addr, sizeof(addr));
        tcp_socket(&sockfd, 1);
    }
    else {
        tcp_connect(&sockfd, host, port, 0);
    }
    CyaSSL_set_fd(ssl, sockfd);
#ifdef HAVE_CRL
    if (CyaSSL_EnableCRL(ssl, CYASSL_CRL_CHECKALL) != SSL_SUCCESS)
        err_sys("can't enable crl check");
    if (CyaSSL_LoadCRL(ssl, crlPemDir, SSL_FILETYPE_PEM, 0) != SSL_SUCCESS)
        err_sys("can't load crl, check crlfile and date validity");
    if (CyaSSL_SetCRL_Cb(ssl, CRL_CallBack) != SSL_SUCCESS)
        err_sys("can't set crl callback");
#endif
#ifdef ATOMIC_USER
    if (atomicUser)
        SetupAtomicUser(ctx, ssl);
#endif
#ifdef HAVE_PK_CALLBACKS
    if (pkCallbacks)
        SetupPkCallbacks(ctx, ssl);
#endif
    if (matchName && doPeerCheck)
        CyaSSL_check_domain_name(ssl, domain);
#ifndef CYASSL_CALLBACKS
    if (nonBlocking) {
        CyaSSL_set_using_nonblock(ssl, 1);
        tcp_set_nonblocking(&sockfd);
        NonBlockingSSL_Connect(ssl);
    }
    else if (CyaSSL_connect(ssl) != SSL_SUCCESS) {
        /* see note at top of README */
        int  err = CyaSSL_get_error(ssl, 0);
        char buffer[CYASSL_MAX_ERROR_SZ];
        printf("err = %d, %s\n", err,
                                CyaSSL_ERR_error_string(err, buffer));
        err_sys("SSL_connect failed");
        /* if you're getting an error here  */
    }
#else
    timeout.tv_sec  = 2;
    timeout.tv_usec = 0;
    NonBlockingSSL_Connect(ssl);  /* will keep retrying on timeout */
#endif
    showPeer(ssl);

    if (sendGET) {
        printf("SSL connect ok, sending GET...\n");
        msgSz = 28;
        strncpy(msg, "GET /index.html HTTP/1.0\r\n\r\n", msgSz);
        msg[msgSz] = '\0';
    }
    if (CyaSSL_write(ssl, msg, msgSz) != msgSz)
        err_sys("SSL_write failed");

    input = CyaSSL_read(ssl, reply, sizeof(reply)-1);
    if (input > 0) {
        reply[input] = 0;
        printf("Server response: %s\n", reply);

        if (sendGET) {  /* get html */
            while (1) {
                input = CyaSSL_read(ssl, reply, sizeof(reply)-1);
                if (input > 0) {
                    reply[input] = 0;
                    printf("%s\n", reply);
                }
                else
                    break;
            }
        }
    }
    else if (input < 0) {
        int readErr = CyaSSL_get_error(ssl, 0);
        if (readErr != SSL_ERROR_WANT_READ)
            err_sys("CyaSSL_read failed");
    }

#ifndef NO_SESSION_CACHE
    if (resumeSession) {
        if (doDTLS) {
            strncpy(msg, "break", 6);
            msgSz = (int)strlen(msg);
            /* try to send session close */
            CyaSSL_write(ssl, msg, msgSz);
        }
        session   = CyaSSL_get_session(ssl);
        sslResume = CyaSSL_new(ctx);
    }
#endif

    if (doDTLS == 0)            /* don't send alert after "break" command */
        CyaSSL_shutdown(ssl);  /* echoserver will interpret as new conn */
#ifdef ATOMIC_USER
    if (atomicUser)
        FreeAtomicUser(ssl);
#endif
    CyaSSL_free(ssl);
    CloseSocket(sockfd);

#ifndef NO_SESSION_CACHE
    if (resumeSession) {
        if (doDTLS) {
            SOCKADDR_IN_T addr;
            #ifdef USE_WINDOWS_API 
                Sleep(500);
            #else
                sleep(1);
            #endif
            build_addr(&addr, host, port, 1);
            CyaSSL_dtls_set_peer(sslResume, &addr, sizeof(addr));
            tcp_socket(&sockfd, 1);
        }
        else {
            tcp_connect(&sockfd, host, port, 0);
        }
        CyaSSL_set_fd(sslResume, sockfd);
        CyaSSL_set_session(sslResume, session);
       
        showPeer(sslResume);
#ifndef CYASSL_CALLBACKS
        if (nonBlocking) {
            CyaSSL_set_using_nonblock(sslResume, 1);
            tcp_set_nonblocking(&sockfd);
            NonBlockingSSL_Connect(sslResume);
        }
        else if (CyaSSL_connect(sslResume) != SSL_SUCCESS)
            err_sys("SSL resume failed");
#else
        timeout.tv_sec  = 2;
        timeout.tv_usec = 0;
        NonBlockingSSL_Connect(ssl);  /* will keep retrying on timeout */
#endif

        if (CyaSSL_session_reused(sslResume))
            printf("reused session id\n");
        else
            printf("didn't reuse session id!!!\n");

        if (CyaSSL_write(sslResume, resumeMsg, resumeSz) != resumeSz)
            err_sys("SSL_write failed");

        if (nonBlocking) {
            /* give server a chance to bounce a message back to client */
            #ifdef USE_WINDOWS_API
                Sleep(500);
            #else
                sleep(1);
            #endif
        }

        input = CyaSSL_read(sslResume, reply, sizeof(reply)-1);
        if (input > 0) {
            reply[input] = 0;
            printf("Server resume response: %s\n", reply);
        }

        /* try to send session break */
        CyaSSL_write(sslResume, msg, msgSz); 

        CyaSSL_shutdown(sslResume);
        CyaSSL_free(sslResume);
        CloseSocket(sockfd);
    }
#endif /* NO_SESSION_CACHE */

    CyaSSL_CTX_free(ctx);

    ((func_args*)args)->return_code = 0;

#ifdef USE_CYASSL_MEMORY
    if (trackMemory)
        ShowMemoryTracker();
#endif /* USE_CYASSL_MEMORY */

    return 0;
}
示例#6
0
THREAD_RETURN CYASSL_THREAD server_test(void* args)
{
    SOCKET_T sockfd   = 0;
    SOCKET_T clientfd = 0;

    SSL_METHOD* method = 0;
    SSL_CTX*    ctx    = 0;
    SSL*        ssl    = 0;

    char   msg[] = "I hear you fa shizzle!";
    char   input[80];
    int    idx;
    int    ch;
    int    version = SERVER_DEFAULT_VERSION;
    int    doCliCertCheck = 1;
    int    useAnyAddr = 0;
    word16 port = yasslPort;
    int    usePsk = 0;
    int    useAnon = 0;
    int    doDTLS = 0;
    int    useNtruKey   = 0;
    int    nonBlocking  = 0;
    int    trackMemory  = 0;
    int    fewerPackets = 0;
    int    pkCallbacks  = 0;
    int    serverReadyFile = 0;
    char*  cipherList = NULL;
    const char* verifyCert = cliCert;
    const char* ourCert    = svrCert;
    const char* ourKey     = svrKey;
    int    argc = ((func_args*)args)->argc;
    char** argv = ((func_args*)args)->argv;

#ifdef HAVE_SNI
    char*  sniHostName = NULL;
#endif

#ifdef HAVE_OCSP
    int    useOcsp  = 0;
    char*  ocspUrl  = NULL;
#endif

    ((func_args*)args)->return_code = -1; /* error state */

#ifdef NO_RSA
    verifyCert = (char*)cliEccCert;
    ourCert    = (char*)eccCert;
    ourKey     = (char*)eccKey;
#endif
    (void)trackMemory;
    (void)pkCallbacks;

#ifdef CYASSL_TIRTOS
    fdOpenSession(Task_self());
#endif

    while ((ch = mygetopt(argc, argv, "?dbstnNufraPp:v:l:A:c:k:S:oO:")) != -1) {
        switch (ch) {
            case '?' :
                Usage();
                exit(EXIT_SUCCESS);

            case 'd' :
                doCliCertCheck = 0;
                break;

            case 'b' :
                useAnyAddr = 1;
                break;

            case 's' :
                usePsk = 1;
                break;

            case 't' :
            #ifdef USE_CYASSL_MEMORY
                trackMemory = 1;
            #endif
                break;

            case 'n' :
                useNtruKey = 1;
                break;

            case 'u' :
                doDTLS  = 1;
                break;

            case 'f' :
                fewerPackets = 1;
                break;

            case 'r' :
                serverReadyFile = 1;
                break;

            case 'P' :
            #ifdef HAVE_PK_CALLBACKS 
                pkCallbacks = 1;
            #endif
                break;

            case 'p' :
                port = (word16)atoi(myoptarg);
                #if !defined(NO_MAIN_DRIVER) || defined(USE_WINDOWS_API)
                    if (port == 0)
                        err_sys("port number cannot be 0");
                #endif
                break;

            case 'v' :
                version = atoi(myoptarg);
                if (version < 0 || version > 3) {
                    Usage();
                    exit(MY_EX_USAGE);
                }
                break;

            case 'l' :
                cipherList = myoptarg;
                break;

            case 'A' :
                verifyCert = myoptarg;
                break;

            case 'c' :
                ourCert = myoptarg;
                break;

            case 'k' :
                ourKey = myoptarg;
                break;

            case 'N':
                nonBlocking = 1;
                break;

            case 'S' :
                #ifdef HAVE_SNI
                    sniHostName = myoptarg;
                #endif
                break;

            case 'o' :
                #ifdef HAVE_OCSP
                    useOcsp = 1;
                #endif
                break;

            case 'O' :
                #ifdef HAVE_OCSP
                    useOcsp = 1;
                    ocspUrl = myoptarg;
                #endif
                break;

            case 'a' :
                #ifdef HAVE_ANON
                    useAnon = 1;
                #endif
                break;

            default:
                Usage();
                exit(MY_EX_USAGE);
        }
    }

    myoptind = 0;      /* reset for test cases */

    /* sort out DTLS versus TLS versions */
    if (version == CLIENT_INVALID_VERSION) {
        if (doDTLS)
            version = CLIENT_DTLS_DEFAULT_VERSION;
        else
            version = CLIENT_DEFAULT_VERSION;
    }
    else {
        if (doDTLS) {
            if (version == 3)
                version = -2;
            else
                version = -1;
        }
    }

#ifdef USE_CYASSL_MEMORY
    if (trackMemory)
        InitMemoryTracker(); 
#endif

    switch (version) {
#ifndef NO_OLD_TLS
        case 0:
            method = SSLv3_server_method();
            break;

    #ifndef NO_TLS
        case 1:
            method = TLSv1_server_method();
            break;


        case 2:
            method = TLSv1_1_server_method();
            break;

        #endif
#endif

#ifndef NO_TLS
        case 3:
            method = TLSv1_2_server_method();
            break;
#endif
                
#ifdef CYASSL_DTLS
        case -1:
            method = DTLSv1_server_method();
            break;

        case -2:
            method = DTLSv1_2_server_method();
            break;
#endif

        default:
            err_sys("Bad SSL version");
    }

    if (method == NULL)
        err_sys("unable to get method");

    ctx = SSL_CTX_new(method);
    if (ctx == NULL)
        err_sys("unable to get ctx");

    if (cipherList)
        if (SSL_CTX_set_cipher_list(ctx, cipherList) != SSL_SUCCESS)
            err_sys("server can't set cipher list 1");

#ifdef CYASSL_LEANPSK
    usePsk = 1;
#endif

#if defined(NO_RSA) && !defined(HAVE_ECC)
    usePsk = 1;
#endif

    if (fewerPackets)
        CyaSSL_CTX_set_group_messages(ctx);

#if defined(OPENSSL_EXTRA) || defined(HAVE_WEBSERVER)
    SSL_CTX_set_default_passwd_cb(ctx, PasswordCallBack);
#endif

#if !defined(NO_FILESYSTEM) && !defined(NO_CERTS)
    if (!usePsk && !useAnon) {
        if (SSL_CTX_use_certificate_file(ctx, ourCert, SSL_FILETYPE_PEM)
                                         != SSL_SUCCESS)
            err_sys("can't load server cert file, check file and run from"
                    " CyaSSL home dir");
    }
#endif

#ifdef HAVE_NTRU
    if (useNtruKey) {
        if (CyaSSL_CTX_use_NTRUPrivateKey_file(ctx, ourKey)
                                               != SSL_SUCCESS)
            err_sys("can't load ntru key file, "
                    "Please run from CyaSSL home dir");
    }
#endif

#if !defined(NO_FILESYSTEM) && !defined(NO_CERTS)
    if (!useNtruKey && !usePsk && !useAnon) {
        if (SSL_CTX_use_PrivateKey_file(ctx, ourKey, SSL_FILETYPE_PEM)
                                         != SSL_SUCCESS)
            err_sys("can't load server private key file, check file and run "
                "from CyaSSL home dir");
    }
#endif

    if (usePsk) {
#ifndef NO_PSK
        SSL_CTX_set_psk_server_callback(ctx, my_psk_server_cb);
        SSL_CTX_use_psk_identity_hint(ctx, "cyassl server");
        if (cipherList == NULL) {
            const char *defaultCipherList;
            #ifdef HAVE_NULL_CIPHER
                defaultCipherList = "PSK-NULL-SHA256";
            #else
                defaultCipherList = "PSK-AES128-CBC-SHA256";
            #endif
            if (SSL_CTX_set_cipher_list(ctx, defaultCipherList) != SSL_SUCCESS)
                err_sys("server can't set cipher list 2");
        }
#endif
    }

    if (useAnon) {
#ifdef HAVE_ANON
        CyaSSL_CTX_allow_anon_cipher(ctx);
        if (cipherList == NULL) {
            if (SSL_CTX_set_cipher_list(ctx, "ADH-AES128-SHA") != SSL_SUCCESS)
                err_sys("server can't set cipher list 4");
        }
#endif
    }

#if !defined(NO_FILESYSTEM) && !defined(NO_CERTS)
    /* if not using PSK, verify peer with certs */
    if (doCliCertCheck && usePsk == 0 && useAnon == 0) {
        SSL_CTX_set_verify(ctx, SSL_VERIFY_PEER |
                                SSL_VERIFY_FAIL_IF_NO_PEER_CERT,0);
        if (SSL_CTX_load_verify_locations(ctx, verifyCert, 0) != SSL_SUCCESS)
            err_sys("can't load ca file, Please run from CyaSSL home dir");
    }
#endif

#if defined(CYASSL_SNIFFER) && !defined(HAVE_NTRU) && !defined(HAVE_ECC)
    /* don't use EDH, can't sniff tmp keys */
    if (cipherList == NULL) {
        if (SSL_CTX_set_cipher_list(ctx, "AES256-SHA256") != SSL_SUCCESS)
            err_sys("server can't set cipher list 3");
    }
#endif

#ifdef HAVE_SNI
    if (sniHostName)
        if (CyaSSL_CTX_UseSNI(ctx, CYASSL_SNI_HOST_NAME, sniHostName,
                                           XSTRLEN(sniHostName)) != SSL_SUCCESS)
            err_sys("UseSNI failed");
#endif

    ssl = SSL_new(ctx);
    if (ssl == NULL)
        err_sys("unable to get SSL");

#ifdef HAVE_CRL
    CyaSSL_EnableCRL(ssl, 0);
    CyaSSL_LoadCRL(ssl, crlPemDir, SSL_FILETYPE_PEM, CYASSL_CRL_MONITOR |
                                                     CYASSL_CRL_START_MON);
    CyaSSL_SetCRL_Cb(ssl, CRL_CallBack);
#endif
#ifdef HAVE_OCSP
    if (useOcsp) {
        if (ocspUrl != NULL) {
            CyaSSL_CTX_SetOCSP_OverrideURL(ctx, ocspUrl);
            CyaSSL_CTX_EnableOCSP(ctx, CYASSL_OCSP_NO_NONCE
                                                    | CYASSL_OCSP_URL_OVERRIDE);
        }
        else
            CyaSSL_CTX_EnableOCSP(ctx, CYASSL_OCSP_NO_NONCE);
    }
#endif
#ifdef HAVE_PK_CALLBACKS
    if (pkCallbacks)
        SetupPkCallbacks(ctx, ssl);
#endif

    tcp_accept(&sockfd, &clientfd, (func_args*)args, port, useAnyAddr, doDTLS,
               serverReadyFile);
    if (!doDTLS) 
        CloseSocket(sockfd);

    SSL_set_fd(ssl, clientfd);
    if (usePsk == 0 || useAnon == 1 || cipherList != NULL) {
        #if !defined(NO_FILESYSTEM) && !defined(NO_DH)
            CyaSSL_SetTmpDH_file(ssl, dhParam, SSL_FILETYPE_PEM);
        #elif !defined(NO_DH)
            SetDH(ssl);  /* repick suites with DHE, higher priority than PSK */
        #endif
    }

#ifndef CYASSL_CALLBACKS
    if (nonBlocking) {
        CyaSSL_set_using_nonblock(ssl, 1);
        tcp_set_nonblocking(&clientfd);
        NonBlockingSSL_Accept(ssl);
    } else if (SSL_accept(ssl) != SSL_SUCCESS) {
        int err = SSL_get_error(ssl, 0);
        char buffer[CYASSL_MAX_ERROR_SZ];
        printf("error = %d, %s\n", err, ERR_error_string(err, buffer));
        err_sys("SSL_accept failed");
    }
#else
    NonBlockingSSL_Accept(ssl);
#endif
    showPeer(ssl);

    idx = SSL_read(ssl, input, sizeof(input)-1);
    if (idx > 0) {
        input[idx] = 0;
        printf("Client message: %s\n", input);

    }
    else if (idx < 0) {
        int readErr = SSL_get_error(ssl, 0);
        if (readErr != SSL_ERROR_WANT_READ)
            err_sys("SSL_read failed");
    }

    if (SSL_write(ssl, msg, sizeof(msg)) != sizeof(msg))
        err_sys("SSL_write failed");
        
    #if defined(CYASSL_MDK_SHELL) && defined(HAVE_MDK_RTX)
        os_dly_wait(500) ;
    #elif defined (CYASSL_TIRTOS)
        Task_yield();
    #endif

    SSL_shutdown(ssl);
    SSL_free(ssl);
    SSL_CTX_free(ctx);
    
    CloseSocket(clientfd);
    ((func_args*)args)->return_code = 0;


#if defined(NO_MAIN_DRIVER) && defined(HAVE_ECC) && defined(FP_ECC) \
                            && defined(HAVE_THREAD_LS)
    ecc_fp_free();  /* free per thread cache */
#endif

#ifdef USE_CYASSL_MEMORY
    if (trackMemory)
        ShowMemoryTracker();
#endif

#ifdef CYASSL_TIRTOS
    fdCloseSession(Task_self());
#endif

#ifndef CYASSL_TIRTOS
    return 0;
#endif
}
示例#7
0
文件: client.c 项目: wolfSSL/wolfssh
THREAD_RETURN WOLFSSH_THREAD client_test(void* args)
{
    WOLFSSH_CTX* ctx = NULL;
    WOLFSSH* ssh = NULL;
    SOCKET_T sockFd = WOLFSSH_SOCKET_INVALID;
    SOCKADDR_IN_T clientAddr;
    socklen_t clientAddrSz = sizeof(clientAddr);
    char rxBuf[80];
    int ret;
    int ch;
    word16 port = wolfSshPort;
    char* host = (char*)wolfSshIp;
    const char* username = NULL;
    const char* password = NULL;
    const char* cmd      = NULL;
    byte imExit = 0;
    byte nonBlock = 0;
    byte keepOpen = 0;
#ifdef USE_WINDOWS_API
    byte rawMode = 0;
#endif

    int     argc = ((func_args*)args)->argc;
    char**  argv = ((func_args*)args)->argv;
    ((func_args*)args)->return_code = 0;

    while ((ch = mygetopt(argc, argv, "?NP:h:p:u:xc:Rtz")) != -1) {
        switch (ch) {
            case 'h':
                host = myoptarg;
                break;

            case 'z':
            #ifdef WOLFSSH_SHOW_SIZES
                wolfSSH_ShowSizes();
                exit(EXIT_SUCCESS);
            #endif
                break;

            case 'p':
                port = (word16)atoi(myoptarg);
                #if !defined(NO_MAIN_DRIVER) || defined(USE_WINDOWS_API)
                    if (port == 0)
                        err_sys("port number cannot be 0");
                #endif
                break;

            case 'u':
                username = myoptarg;
                break;

            case 'P':
                password = myoptarg;
                break;

            case 'x':
                /* exit after successful connection without read/write */
                imExit = 1;
                break;

            case 'N':
                nonBlock = 1;
                break;

        #if !defined(SINGLE_THREADED) && !defined(WOLFSSL_NUCLEUS)
            case 'c':
                cmd = myoptarg;
                break;
        #ifdef USE_WINDOWS_API
           case 'R':
                rawMode = 1;
                break;
        #endif /* USE_WINDOWS_API */
        #endif

        #ifdef WOLFSSH_TERM
            case 't':
                keepOpen = 1;
                break;
        #endif
            case '?':
                ShowUsage();
                exit(EXIT_SUCCESS);

            default:
                ShowUsage();
                exit(MY_EX_USAGE);
        }
    }
    myoptind = 0;      /* reset for test cases */

    if (username == NULL)
        err_sys("client requires a username parameter.");

#ifdef SINGLE_THREADED
    if (keepOpen)
        err_sys("Threading needed for terminal session\n");
#endif

    ctx = wolfSSH_CTX_new(WOLFSSH_ENDPOINT_CLIENT, NULL);
    if (ctx == NULL)
        err_sys("Couldn't create wolfSSH client context.");

    if (((func_args*)args)->user_auth == NULL)
        wolfSSH_SetUserAuth(ctx, wsUserAuth);
    else
        wolfSSH_SetUserAuth(ctx, ((func_args*)args)->user_auth);

    ssh = wolfSSH_new(ctx);
    if (ssh == NULL)
        err_sys("Couldn't create wolfSSH session.");

    if (password != NULL)
        wolfSSH_SetUserAuthCtx(ssh, (void*)password);

    wolfSSH_CTX_SetPublicKeyCheck(ctx, wsPublicKeyCheck);
    wolfSSH_SetPublicKeyCheckCtx(ssh, (void*)"You've been sampled!");

    ret = wolfSSH_SetUsername(ssh, username);
    if (ret != WS_SUCCESS)
        err_sys("Couldn't set the username.");

    build_addr(&clientAddr, host, port);
    tcp_socket(&sockFd);
    ret = connect(sockFd, (const struct sockaddr *)&clientAddr, clientAddrSz);
    if (ret != 0)
        err_sys("Couldn't connect to server.");

    if (nonBlock)
        tcp_set_nonblocking(&sockFd);

    ret = wolfSSH_set_fd(ssh, (int)sockFd);
    if (ret != WS_SUCCESS)
        err_sys("Couldn't set the session's socket.");

    if (cmd != NULL) {
        ret = wolfSSH_SetChannelType(ssh, WOLFSSH_SESSION_EXEC,
                            (byte*)cmd, (word32)WSTRLEN((char*)cmd));
        if (ret != WS_SUCCESS)
            err_sys("Couldn't set the channel type.");
    }

#ifdef WOLFSSH_TERM
    if (keepOpen) {
        ret = wolfSSH_SetChannelType(ssh, WOLFSSH_SESSION_TERMINAL, NULL, 0);
        if (ret != WS_SUCCESS)
            err_sys("Couldn't set the terminal channel type.");
    }
#endif

    if (!nonBlock)
        ret = wolfSSH_connect(ssh);
    else
        ret = NonBlockSSH_connect(ssh);
    if (ret != WS_SUCCESS) {
        printf("err = %s\n", wolfSSH_get_error_name(ssh));
        err_sys("Couldn't connect SSH stream.");
    }

#if !defined(SINGLE_THREADED) && !defined(WOLFSSL_NUCLEUS)
    if (keepOpen) /* set up for psuedo-terminal */
        SetEcho(2);

    if (cmd != NULL || keepOpen == 1) {
    #if defined(_POSIX_THREADS)
        thread_args arg;
        pthread_t   thread[2];

        arg.ssh = ssh;
        wc_InitMutex(&arg.lock);
        pthread_create(&thread[0], NULL, readInput, (void*)&arg);
        pthread_create(&thread[1], NULL, readPeer, (void*)&arg);
        pthread_join(thread[1], NULL);
        pthread_cancel(thread[0]);
    #elif defined(_MSC_VER)
        thread_args arg;
        HANDLE thread[2];

        arg.ssh     = ssh;
        arg.rawMode = rawMode;
        wc_InitMutex(&arg.lock);
        thread[0] = CreateThread(NULL, 0, readInput, (void*)&arg, 0, 0);
        thread[1] = CreateThread(NULL, 0, readPeer, (void*)&arg, 0, 0);
        WaitForSingleObject(thread[1], INFINITE);
        CloseHandle(thread[0]);
        CloseHandle(thread[1]);
    #else
        err_sys("No threading to use");
    #endif
        if (keepOpen)
            SetEcho(1);
    }
    else
#endif
    if (!imExit) {
        ret = wolfSSH_stream_send(ssh, (byte*)testString,
                                  (word32)strlen(testString));
        if (ret <= 0)
            err_sys("Couldn't send test string.");

        do {
            ret = wolfSSH_stream_read(ssh, (byte*)rxBuf, sizeof(rxBuf) - 1);
            if (ret <= 0) {
                ret = wolfSSH_get_error(ssh);
                if (ret != WS_WANT_READ && ret != WS_WANT_WRITE)
                    err_sys("Stream read failed.");
            }
        } while (ret == WS_WANT_READ || ret == WS_WANT_WRITE);

        rxBuf[ret] = '\0';
        printf("Server said: %s\n", rxBuf);
    }
    ret = wolfSSH_shutdown(ssh);
    WCLOSESOCKET(sockFd);
    wolfSSH_free(ssh);
    wolfSSH_CTX_free(ctx);
    if (ret != WS_SUCCESS)
        err_sys("Closing stream failed. Connection could have been closed by peer");

#if defined(HAVE_ECC) && defined(FP_ECC) && defined(HAVE_THREAD_LS)
    wc_ecc_fp_free();  /* free per thread cache */
#endif

    return 0;
}
THREAD_RETURN CYASSL_THREAD server_test(void* args)
{
    SOCKET_T sockfd   = 0;
    int      clientfd = 0;

    SSL_METHOD* method = 0;
    SSL_CTX*    ctx    = 0;
    SSL*        ssl    = 0;

    char   msg[] = "I hear you fa shizzle!";
    char   input[1024];
    int    idx;
    int    ch;
    int    version = SERVER_DEFAULT_VERSION;
    int    doCliCertCheck = 1;
    int    useAnyAddr = 0;
    int    port = yasslPort;
    int    usePsk = 0;
    int    doDTLS = 0;
    int    useNtruKey = 0;
    char*  cipherList = NULL;
    char*  verifyCert = (char*)cliCert;
    char*  ourCert    = (char*)svrCert;
    char*  ourKey     = (char*)svrKey;
    int    argc = ((func_args*)args)->argc;
    char** argv = ((func_args*)args)->argv;

    ((func_args*)args)->return_code = -1; /* error state */

    while ((ch = mygetopt(argc, argv, "?dbsnup:v:l:A:c:k:")) != -1) {
        switch (ch) {
            case '?' :
                Usage();
                exit(EXIT_SUCCESS);

            case 'd' :
                doCliCertCheck = 0;
                break;

            case 'b' :
                useAnyAddr = 1;
                break;

            case 's' :
                usePsk = 1;
                break;

            case 'n' :
                useNtruKey = 1;
                break;

            case 'u' :
                doDTLS  = 1;
                version = -1;  /* DTLS flag */
                break;

            case 'p' :
                port = atoi(myoptarg);
                break;

            case 'v' :
                version = atoi(myoptarg);
                if (version < 0 || version > 3) {
                    Usage();
                    exit(MY_EX_USAGE);
                }
                if (doDTLS)
                    version = -1;  /* stay with DTLS */
                break;

            case 'l' :
                cipherList = myoptarg;
                break;

            case 'A' :
                verifyCert = myoptarg;
                break;

            case 'c' :
                ourCert = myoptarg;
                break;

            case 'k' :
                ourKey = myoptarg;
                break;

            default:
                Usage();
                exit(MY_EX_USAGE);
        }
    }

    argc -= myoptind;
    argv += myoptind;
    myoptind = 0;      /* reset for test cases */

    switch (version) {
        case 0:
            method = SSLv3_server_method();
            break;

        case 1:
            method = TLSv1_server_method();
            break;

        case 2:
            method = TLSv1_1_server_method();
            break;

        case 3:
            method = TLSv1_2_server_method();
            break;

#ifdef CYASSL_DTLS
        case -1:
            method = DTLSv1_server_method();
            break;
#endif

        default:
            err_sys("Bad SSL version");
    }

    if (method == NULL)
        err_sys("unable to get method");

    ctx = SSL_CTX_new(method);
    if (ctx == NULL)
        err_sys("unable to get ctx");

    if (cipherList)
        if (SSL_CTX_set_cipher_list(ctx, cipherList) != SSL_SUCCESS)
            err_sys("can't set cipher list");

    if (SSL_CTX_use_certificate_file(ctx, ourCert, SSL_FILETYPE_PEM)
                                     != SSL_SUCCESS)
        err_sys("can't load server cert file, check file and run from"
                " CyaSSL home dir");


#ifdef HAVE_NTRU
    if (useNtruKey) {
        if (CyaSSL_CTX_use_NTRUPrivateKey_file(ctx, ourKey)
                                               != SSL_SUCCESS)
            err_sys("can't load ntru key file, "
                    "Please run from CyaSSL home dir");
    }
#endif

    if (!useNtruKey) {
        if (SSL_CTX_use_PrivateKey_file(ctx, ourKey, SSL_FILETYPE_PEM)
                                         != SSL_SUCCESS)
            err_sys("can't load server cert file, check file and run from"
                " CyaSSL home dir");
    }

#ifndef NO_PSK
    if (usePsk) {
        SSL_CTX_set_psk_server_callback(ctx, my_psk_server_cb);
        SSL_CTX_use_psk_identity_hint(ctx, "cyassl server");
        if (cipherList == NULL)
            if (SSL_CTX_set_cipher_list(ctx,"PSK-AES256-CBC-SHA") !=SSL_SUCCESS)
                err_sys("can't set cipher list");
    }
#endif

    /* if not using PSK, verify peer with certs */
    if (doCliCertCheck && usePsk == 0) {
        SSL_CTX_set_verify(ctx, SSL_VERIFY_PEER |
                                SSL_VERIFY_FAIL_IF_NO_PEER_CERT,0);
        if (SSL_CTX_load_verify_locations(ctx, verifyCert, 0) != SSL_SUCCESS)
            err_sys("can't load ca file, Please run from CyaSSL home dir");
    }

#ifdef OPENSSL_EXTRA
    SSL_CTX_set_default_passwd_cb(ctx, PasswordCallBack);
#endif

#if defined(CYASSL_SNIFFER) && !defined(HAVE_NTRU) && !defined(HAVE_ECC)
    /* don't use EDH, can't sniff tmp keys */
    if (SSL_CTX_set_cipher_list(ctx, "AES256-SHA") != SSL_SUCCESS)
        err_sys("can't set cipher list");
#endif

    ssl = SSL_new(ctx);
    if (ssl == NULL)
        err_sys("unable to get SSL");

#ifdef HAVE_CRL
    CyaSSL_EnableCRL(ssl, 0);
    CyaSSL_LoadCRL(ssl, crlPemDir, SSL_FILETYPE_PEM, CYASSL_CRL_MONITOR |
                                                     CYASSL_CRL_START_MON);
    CyaSSL_SetCRL_Cb(ssl, CRL_CallBack);
#endif
    tcp_accept(&sockfd, &clientfd, (func_args*)args, port, useAnyAddr, doDTLS);
    if (!doDTLS) 
        CloseSocket(sockfd);

    SSL_set_fd(ssl, clientfd);
#ifdef NO_PSK
    #if !defined(NO_FILESYSTEM) && defined(OPENSSL_EXTRA)
        CyaSSL_SetTmpDH_file(ssl, dhParam, SSL_FILETYPE_PEM);
    #else
        SetDH(ssl);  /* will repick suites with DHE, higher priority than PSK */
    #endif
#endif

#ifdef NON_BLOCKING
    tcp_set_nonblocking(&clientfd);
    NonBlockingSSL_Accept(ssl);
#else
    #ifndef CYASSL_CALLBACKS
        if (SSL_accept(ssl) != SSL_SUCCESS) {
            int err = SSL_get_error(ssl, 0);
            char buffer[80];
            printf("error = %d, %s\n", err, ERR_error_string(err, buffer));
            err_sys("SSL_accept failed");
        }
    #else
        NonBlockingSSL_Accept(ssl);
    #endif
#endif
    showPeer(ssl);

    idx = SSL_read(ssl, input, sizeof(input));
    if (idx > 0) {
        input[idx] = 0;
        printf("Client message: %s\n", input);
    }
    
    if (SSL_write(ssl, msg, sizeof(msg)) != sizeof(msg))
        err_sys("SSL_write failed");

    SSL_shutdown(ssl);
    SSL_free(ssl);
    SSL_CTX_free(ctx);
    
    CloseSocket(clientfd);
    ((func_args*)args)->return_code = 0;
    return 0;
}
示例#9
0
void client_test(void* args)
{
#ifdef _WIN32
    WSADATA wsd;
    WSAStartup(0x0002, &wsd);
#endif

    SOCKET_T sockfd = 0;
    int      argc = 0;
    char**   argv = 0;

    set_args(argc, argv, *static_cast<func_args*>(args));
    tcp_connect(sockfd);
#ifdef NON_BLOCKING
    tcp_set_nonblocking(sockfd);
#endif

    SSL_METHOD* method = TLSv1_client_method();
    SSL_CTX*    ctx = SSL_CTX_new(method);

    set_certs(ctx);
    SSL* ssl = SSL_new(ctx);

    SSL_set_fd(ssl, sockfd);


#ifdef NON_BLOCKING
    NonBlockingSSL_Connect(ssl, ctx, sockfd);
#else
    // if you get an error here see note at top of README
    if (SSL_connect(ssl) != SSL_SUCCESS)   
        ClientError(ctx, ssl, sockfd, "SSL_connect failed");
#endif
    showPeer(ssl);

    const char* cipher = 0;
    int index = 0;
    char list[1024];
    strncpy(list, "cipherlist", 11);
    while ( (cipher = SSL_get_cipher_list(ssl, index++)) ) {
        strncat(list, ":", 2);
        strncat(list, cipher, strlen(cipher) + 1);
    }
    printf("%s\n", list);
    printf("Using Cipher Suite: %s\n", SSL_get_cipher(ssl));

    char msg[] = "hello yassl!";
    if (SSL_write(ssl, msg, sizeof(msg)) != sizeof(msg))
        ClientError(ctx, ssl, sockfd, "SSL_write failed");

    char reply[1024];
    int input = SSL_read(ssl, reply, sizeof(reply));
    if (input > 0) {
        reply[input] = 0;
        printf("Server response: %s\n", reply);
    }

#ifdef TEST_RESUME
    SSL_SESSION* session   = SSL_get_session(ssl);
    SSL*         sslResume = SSL_new(ctx);
#endif

    SSL_shutdown(ssl);
    SSL_free(ssl);
    tcp_close(sockfd);

#ifdef TEST_RESUME
    tcp_connect(sockfd);
    SSL_set_fd(sslResume, sockfd);
    SSL_set_session(sslResume, session);

    if (SSL_connect(sslResume) != SSL_SUCCESS)
        ClientError(ctx, sslResume, sockfd, "SSL_resume failed");
    showPeer(sslResume);

    if (SSL_write(sslResume, msg, sizeof(msg)) != sizeof(msg))
        ClientError(ctx, sslResume, sockfd, "SSL_write failed");

    input = SSL_read(sslResume, reply, sizeof(reply));
    if (input > 0) {
        reply[input] = 0;
        printf("Server response: %s\n", reply);
    }

    SSL_shutdown(sslResume);
    SSL_free(sslResume);
    tcp_close(sockfd);
#endif // TEST_RESUME

    SSL_CTX_free(ctx);
    ((func_args*)args)->return_code = 0;
}
示例#10
0
文件: client.c 项目: lepidum/cyassl
void client_test(void* args)
{
    SOCKET_T sockfd = 0;

    CYASSL_METHOD*  method  = 0;
    CYASSL_CTX*     ctx     = 0;
    CYASSL*         ssl     = 0;
    
#ifdef TEST_RESUME
    CYASSL*         sslResume = 0;
    CYASSL_SESSION* session = 0;
    char         resumeMsg[] = "resuming cyassl!";
    int          resumeSz    = sizeof(resumeMsg);
#endif

    char msg[64] = "hello cyassl!";
    char reply[1024];
    int  input;
    int  msgSz = strlen(msg);

    int   port   = yasslPort;
    char* host   = (char*)yasslIP;
    char* domain = "www.yassl.com";

    int    ch;
    int    version = CLIENT_DEFAULT_VERSION;
    int    usePsk   = 0;
    int    sendGET  = 0;
    int    benchmark = 0;
    int    doDTLS    = 0;
    int    matchName = 0;
    int    doPeerCheck = 1;
    char*  cipherList = NULL;
    char*  verifyCert = (char*)caCert;
    char*  ourCert    = (char*)cliCert;
    char*  ourKey     = (char*)cliKey;

    int     argc = ((func_args*)args)->argc;
    char**  argv = ((func_args*)args)->argv;

    ((func_args*)args)->return_code = -1; /* error state */

    while ((ch = mygetopt(argc, argv, "?gdusmh:p:v:l:A:c:k:b:")) != -1) {
        switch (ch) {
            case '?' :
                Usage();
                exit(EXIT_SUCCESS);

            case 'g' :
                sendGET = 1;
                break;

            case 'd' :
                doPeerCheck = 0;
                break;

            case 'u' :
                doDTLS  = 1;
                version = -1;  /* DTLS flag */
                break;

            case 's' :
                usePsk = 1;
                break;

            case 'm' :
                matchName = 1;
                break;

            case 'h' :
                host   = myoptarg;
                domain = myoptarg;
                break;

            case 'p' :
                port = atoi(myoptarg);
                break;

            case 'v' :
                version = atoi(myoptarg);
                if (version < 0 || version > 3) {
                    Usage();
                    exit(MY_EX_USAGE);
                }
                if (doDTLS)
                    version = -1;   /* DTLS flag */
                break;

            case 'l' :
                cipherList = myoptarg;
                break;

            case 'A' :
                verifyCert = myoptarg;
                break;

            case 'c' :
                ourCert = myoptarg;
                break;

            case 'k' :
                ourKey = myoptarg;
                break;

            case 'b' :
                benchmark = atoi(myoptarg);
                if (benchmark < 0 || benchmark > 1000000) {
                    Usage();
                    exit(MY_EX_USAGE);
                }
                break;

            default:
                Usage();
                exit(MY_EX_USAGE);
        }
    }

    argc -= myoptind;
    argv += myoptind;
    myoptind = 0;      /* reset for test cases */

    switch (version) {
        case 0:
            method = CyaSSLv3_client_method();
            break;

        case 1:
            method = CyaTLSv1_client_method();
            break;

        case 2:
            method = CyaTLSv1_1_client_method();
            break;

        case 3:
            method = CyaTLSv1_2_client_method();
            break;

#ifdef CYASSL_DTLS
        case -1:
            method = CyaDTLSv1_client_method();
            break;
#endif

        default:
            err_sys("Bad SSL version");
    }

    if (method == NULL)
        err_sys("unable to get method");

    ctx = CyaSSL_CTX_new(method);
    if (ctx == NULL)
        err_sys("unable to get ctx");

    if (cipherList)
        if (CyaSSL_CTX_set_cipher_list(ctx, cipherList) != SSL_SUCCESS)
            err_sys("can't set cipher list");

#ifndef NO_PSK
    if (usePsk)
        CyaSSL_CTX_set_psk_client_callback(ctx, my_psk_client_cb);
#endif

#ifdef OPENSSL_EXTRA
    CyaSSL_CTX_set_default_passwd_cb(ctx, PasswordCallBack);
#endif

#if defined(CYASSL_SNIFFER) && !defined(HAVE_NTRU) && !defined(HAVE_ECC)
    /* don't use EDH, can't sniff tmp keys */
    if (cipherList == NULL)
        if (CyaSSL_CTX_set_cipher_list(ctx, "AES256-SHA") != SSL_SUCCESS)
            err_sys("can't set cipher list");
#endif

#ifdef USER_CA_CB
    CyaSSL_CTX_SetCACb(ctx, CaCb);
#endif

#ifdef VERIFY_CALLBACK
    CyaSSL_CTX_set_verify(ctx, SSL_VERIFY_PEER, myVerify);
#endif

    if (CyaSSL_CTX_use_certificate_file(ctx, ourCert, SSL_FILETYPE_PEM)
                                     != SSL_SUCCESS)
        err_sys("can't load client cert file, check file and run from"
                " CyaSSL home dir");

    if (CyaSSL_CTX_use_PrivateKey_file(ctx, ourKey, SSL_FILETYPE_PEM)
                                     != SSL_SUCCESS)
        err_sys("can't load client cert file, check file and run from"
                " CyaSSL home dir");    

    if (CyaSSL_CTX_load_verify_locations(ctx, verifyCert, 0) != SSL_SUCCESS)
            err_sys("can't load ca file, Please run from CyaSSL home dir");

    if (doPeerCheck == 0)
        CyaSSL_CTX_set_verify(ctx, SSL_VERIFY_NONE, 0);

    if (benchmark) {
        /* time passed in number of connects give average */
        int times = benchmark;
        int i = 0;

        double start = current_time(), avg;

        for (i = 0; i < times; i++) {
            tcp_connect(&sockfd, host, port, doDTLS);
            ssl = CyaSSL_new(ctx);
            CyaSSL_set_fd(ssl, sockfd);
            if (CyaSSL_connect(ssl) != SSL_SUCCESS)
                err_sys("SSL_connect failed");

            CyaSSL_shutdown(ssl);
            CyaSSL_free(ssl);
            CloseSocket(sockfd);
        }
        avg = current_time() - start;
        avg /= times;
        avg *= 1000;   /* milliseconds */
        printf("CyaSSL_connect avg took: %8.3f milliseconds\n", avg);

        CyaSSL_CTX_free(ctx);
        ((func_args*)args)->return_code = 0;

        exit(EXIT_SUCCESS);
    }

    tcp_connect(&sockfd, host, port, doDTLS);
    ssl = CyaSSL_new(ctx);
    if (ssl == NULL)
        err_sys("unable to get SSL object");
    CyaSSL_set_fd(ssl, sockfd);
#ifdef HAVE_CRL
    if (CyaSSL_EnableCRL(ssl, CYASSL_CRL_CHECKALL) != SSL_SUCCESS)
        err_sys("can't enable crl check");
    if (CyaSSL_LoadCRL(ssl, crlPemDir, SSL_FILETYPE_PEM, 0) != SSL_SUCCESS)
        err_sys("can't load crl, check crlfile and date validity");
    if (CyaSSL_SetCRL_Cb(ssl, CRL_CallBack) != SSL_SUCCESS)
        err_sys("can't set crl callback");
#endif
    if (matchName && doPeerCheck)
        CyaSSL_check_domain_name(ssl, domain);
#ifdef NON_BLOCKING
    tcp_set_nonblocking(&sockfd);
    NonBlockingSSL_Connect(ssl);
#else
    #ifndef CYASSL_CALLBACKS
        if (CyaSSL_connect(ssl) != SSL_SUCCESS) {/* see note at top of README */
            int  err = CyaSSL_get_error(ssl, 0);
            char buffer[80];
            printf("err = %d, %s\n", err, CyaSSL_ERR_error_string(err, buffer));
            err_sys("SSL_connect failed");/* if you're getting an error here  */
        }
    #else
        timeout.tv_sec  = 2;
        timeout.tv_usec = 0;
        NonBlockingSSL_Connect(ssl);  /* will keep retrying on timeout */
    #endif
#endif
    showPeer(ssl);

    if (sendGET) {
        printf("SSL connect ok, sending GET...\n");
        msgSz = 28;
        strncpy(msg, "GET /index.html HTTP/1.0\r\n\r\n", msgSz);
    }
    if (CyaSSL_write(ssl, msg, msgSz) != msgSz)
        err_sys("SSL_write failed");

    input = CyaSSL_read(ssl, reply, sizeof(reply));
    if (input > 0) {
        reply[input] = 0;
        printf("Server response: %s\n", reply);

        if (sendGET) {  /* get html */
            while (1) {
                input = CyaSSL_read(ssl, reply, sizeof(reply));
                if (input > 0) {
                    reply[input] = 0;
                    printf("%s\n", reply);
                }
                else
                    break;
            }
        }
    }
  
#ifdef TEST_RESUME
    if (doDTLS) {
        strncpy(msg, "break", 6);
        msgSz = (int)strlen(msg);
        /* try to send session close */
        CyaSSL_write(ssl, msg, msgSz);
    }
    session   = CyaSSL_get_session(ssl);
    sslResume = CyaSSL_new(ctx);
#endif

    if (doDTLS == 0)            /* don't send alert after "break" command */
        CyaSSL_shutdown(ssl);  /* echoserver will interpret as new conn */
    CyaSSL_free(ssl);
    CloseSocket(sockfd);

#ifdef TEST_RESUME
    if (doDTLS) {
        #ifdef USE_WINDOWS_API 
            Sleep(500);
        #else
            sleep(1);
        #endif
    }
    tcp_connect(&sockfd, host, port, doDTLS);
    CyaSSL_set_fd(sslResume, sockfd);
    CyaSSL_set_session(sslResume, session);
   
    showPeer(sslResume);
#ifdef NON_BLOCKING
    tcp_set_nonblocking(&sockfd);
    NonBlockingSSL_Connect(sslResume);
#else
    #ifndef CYASSL_CALLBACKS
        if (CyaSSL_connect(sslResume) != SSL_SUCCESS)
            err_sys("SSL resume failed");
    #else
        timeout.tv_sec  = 2;
        timeout.tv_usec = 0;
        NonBlockingSSL_Connect(ssl);  /* will keep retrying on timeout */
    #endif
#endif

#ifdef OPENSSL_EXTRA
    if (CyaSSL_session_reused(sslResume))
        printf("reused session id\n");
    else
        printf("didn't reuse session id!!!\n");
#endif
  
    if (CyaSSL_write(sslResume, resumeMsg, resumeSz) != resumeSz)
        err_sys("SSL_write failed");

#ifdef NON_BLOCKING
    /* need to give server a chance to bounce a message back to client */
    #ifdef USE_WINDOWS_API
        Sleep(500);
    #else
        sleep(1);
    #endif
#endif

    input = CyaSSL_read(sslResume, reply, sizeof(reply));
    if (input > 0) {
        reply[input] = 0;
        printf("Server resume response: %s\n", reply);
    }

    /* try to send session break */
    CyaSSL_write(sslResume, msg, msgSz); 

    CyaSSL_shutdown(sslResume);
    CyaSSL_free(sslResume);
#endif /* TEST_RESUME */

    CyaSSL_CTX_free(ctx);
    CloseSocket(sockfd);

    ((func_args*)args)->return_code = 0;
}
示例#11
0
static int NetConnect(void *context, const char* host, word16 port,
    int timeout_ms)
{
    SocketContext *sock = (SocketContext*)context;
    int type = SOCK_STREAM;
    int rc = -1;
    SOERROR_T so_error = 0;
    struct addrinfo *result = NULL;
    struct addrinfo hints;
#if defined(MICROCHIP_MPLAB_HARMONY)
    struct hostent *hostInfo;
#endif

    /* Get address information for host and locate IPv4 */
    switch(sock->stat) {
        case SOCK_BEGIN:
        {
            XMEMSET(&hints, 0, sizeof(hints));
            hints.ai_family = AF_INET;
            hints.ai_socktype = SOCK_STREAM;
            hints.ai_protocol = IPPROTO_TCP;

            XMEMSET(&sock->addr, 0, sizeof(sock->addr));
            sock->addr.sin_family = AF_INET;

        #if defined(MICROCHIP_MPLAB_HARMONY)
            hostInfo = gethostbyname((char *)host);
            if (hostInfo != NULL) {
                sock->addr.sin_port = port; /* htons(port); */
                sock->addr.sin_family = AF_INET;
                XMEMCPY(&sock->addr.sin_addr.S_un,
                            *(hostInfo->h_addr_list), sizeof(IPV4_ADDR));
            }
            else {
                return MQTT_CODE_CONTINUE;
            }
        #else
            rc = getaddrinfo(host, NULL, &hints, &result);
            if (rc >= 0 && result != NULL) {
                struct addrinfo* res = result;

                /* prefer ip4 addresses */
                while (res) {
                    if (res->ai_family == AF_INET) {
                        result = res;
                        break;
                    }
                    res = res->ai_next;
                }

                if (result->ai_family == AF_INET) {
                    sock->addr.sin_port = htons(port);
                    sock->addr.sin_family = AF_INET;
                    sock->addr.sin_addr =
                        ((struct sockaddr_in*)(result->ai_addr))->sin_addr;
                }
                else {
                    rc = -1;
                }

                freeaddrinfo(result);
            }
            if (rc != 0) goto exit;
        #endif /* MICROCHIP_MPLAB_HARMONY */

            /* Default to error */
            rc = -1;

            /* Create socket */
            sock->fd = socket(sock->addr.sin_family, type, 0);
            if (sock->fd == SOCKET_INVALID)
                goto exit;

            sock->stat = SOCK_CONN;

            FALL_THROUGH;
        }

        case SOCK_CONN:
        {
        #ifndef WOLFMQTT_NO_TIMEOUT
            fd_set fdset;
            struct timeval tv;

            /* Setup timeout and FD's */
            setup_timeout(&tv, timeout_ms);
            FD_ZERO(&fdset);
            FD_SET(sock->fd, &fdset);
        #endif /* !WOLFMQTT_NO_TIMEOUT */

        #if !defined(WOLFMQTT_NO_TIMEOUT) && defined(WOLFMQTT_NONBLOCK)
            /* Set socket as non-blocking */
            tcp_set_nonblocking(&sock->fd);
        #endif

            /* Start connect */
            rc = connect(sock->fd, (struct sockaddr*)&sock->addr, sizeof(sock->addr));
    #if defined(MICROCHIP_MPLAB_HARMONY)
            if (rc)
    #else
        #ifndef WOLFMQTT_NO_TIMEOUT
            /* Wait for connect */
            if (rc < 0 || select((int)SELECT_FD(sock->fd), NULL, &fdset, NULL, &tv) > 0)
        #else
            if (rc < 0)
        #endif /* !WOLFMQTT_NO_TIMEOUT */
    #endif /* MICROCHIP_MPLAB_HARMONY */
            {
                /* Check for error */
        #if defined(MICROCHIP_MPLAB_HARMONY)
                if (errno == EINPROGRESS) {
                    rc = MQTT_CODE_CONTINUE;
                }
        #else
                socklen_t len = sizeof(so_error);
                getsockopt(sock->fd, SOL_SOCKET, SO_ERROR, &so_error, &len);
                if (so_error == 0) {
                    rc = 0; /* Success */
                }
            #if !defined(WOLFMQTT_NO_TIMEOUT) && defined(WOLFMQTT_NONBLOCK)
                else if (so_error == EINPROGRESS) {
                    rc = MQTT_CODE_CONTINUE;
                }
            #endif
        #endif /* MICROCHIP_MPLAB_HARMONY */
            }
            break;
        }

        default:
            rc = -1;
    } /* switch */

    (void)timeout_ms;

exit:
    /* Show error */
    if (rc != 0) {
        PRINTF("NetConnect: Rc=%d, SoErr=%d", rc, so_error);
    }

    return rc;
}
示例#12
0
文件: server.c 项目: agnov8/wolfssl
THREAD_RETURN CYASSL_THREAD server_test(void* args)
{
    SOCKET_T sockfd   = WOLFSSL_SOCKET_INVALID;
    SOCKET_T clientfd = WOLFSSL_SOCKET_INVALID;

    SSL_METHOD* method = 0;
    SSL_CTX*    ctx    = 0;
    SSL*        ssl    = 0;

    const char msg[] = "I hear you fa shizzle!";
    char   input[80];
    int    ch;
    int    version = SERVER_DEFAULT_VERSION;
    int    doCliCertCheck = 1;
    int    useAnyAddr = 0;
    word16 port = wolfSSLPort;
    int    usePsk = 0;
    int    usePskPlus = 0;
    int    useAnon = 0;
    int    doDTLS = 0;
    int    needDH = 0;
    int    useNtruKey   = 0;
    int    nonBlocking  = 0;
    int    trackMemory  = 0;
    int    fewerPackets = 0;
    int    pkCallbacks  = 0;
    int    wc_shutdown     = 0;
    int    resume = 0;
    int    resumeCount = 0;
    int    loopIndefinitely = 0;
    int    echoData = 0;
    int    throughput = 0;
    int    minDhKeyBits  = DEFAULT_MIN_DHKEY_BITS;
    short  minRsaKeyBits = DEFAULT_MIN_RSAKEY_BITS;
    short  minEccKeyBits = DEFAULT_MIN_ECCKEY_BITS;
    int    doListen = 1;
    int    crlFlags = 0;
    int    ret;
    int    err = 0;
    char*  serverReadyFile = NULL;
    char*  alpnList = NULL;
    unsigned char alpn_opt = 0;
    char*  cipherList = NULL;
    const char* verifyCert = cliCert;
    const char* ourCert    = svrCert;
    const char* ourKey     = svrKey;
    const char* ourDhParam = dhParam;
    tcp_ready*  readySignal = NULL;
    int    argc = ((func_args*)args)->argc;
    char** argv = ((func_args*)args)->argv;

#ifdef WOLFSSL_TRUST_PEER_CERT
    const char* trustCert  = NULL;
#endif

#ifndef NO_PSK
    int sendPskIdentityHint = 1;
#endif

#ifdef HAVE_SNI
    char*  sniHostName = NULL;
#endif

#ifdef HAVE_OCSP
    int    useOcsp  = 0;
    char*  ocspUrl  = NULL;
#endif

    ((func_args*)args)->return_code = -1; /* error state */

#ifdef NO_RSA
    verifyCert = (char*)cliEccCert;
    ourCert    = (char*)eccCert;
    ourKey     = (char*)eccKey;
#endif
    (void)trackMemory;
    (void)pkCallbacks;
    (void)needDH;
    (void)ourKey;
    (void)ourCert;
    (void)ourDhParam;
    (void)verifyCert;
    (void)useNtruKey;
    (void)doCliCertCheck;
    (void)minDhKeyBits;
    (void)minRsaKeyBits;
    (void)minEccKeyBits;
    (void)alpnList;
    (void)alpn_opt;
    (void)crlFlags;
    (void)readySignal;

#ifdef CYASSL_TIRTOS
    fdOpenSession(Task_self());
#endif

#ifdef WOLFSSL_VXWORKS
    useAnyAddr = 1;
#else
    while ((ch = mygetopt(argc, argv, "?jdbstnNufrawPIR:p:v:l:A:c:k:Z:S:oO:D:L:ieB:E:"))
                         != -1) {
        switch (ch) {
            case '?' :
                Usage();
                exit(EXIT_SUCCESS);

            case 'd' :
                doCliCertCheck = 0;
                break;

            case 'b' :
                useAnyAddr = 1;
                break;

            case 's' :
                usePsk = 1;
                break;

            case 'j' :
                usePskPlus = 1;
                break;

            case 't' :
            #ifdef USE_WOLFSSL_MEMORY
                trackMemory = 1;
            #endif
                break;

            case 'n' :
                useNtruKey = 1;
                break;

            case 'u' :
                doDTLS  = 1;
                break;

            case 'f' :
                fewerPackets = 1;
                break;

            case 'R' :
                serverReadyFile = myoptarg;
                break;

            case 'r' :
                #ifndef NO_SESSION_CACHE
                    resume = 1;
                #endif
                break;

            case 'P' :
            #ifdef HAVE_PK_CALLBACKS
                pkCallbacks = 1;
            #endif
                break;

            case 'p' :
                port = (word16)atoi(myoptarg);
                break;

            case 'w' :
                wc_shutdown = 1;
                break;

            case 'v' :
                version = atoi(myoptarg);
                if (version < 0 || version > 3) {
                    Usage();
                    exit(MY_EX_USAGE);
                }
                break;

            case 'l' :
                cipherList = myoptarg;
                break;

            case 'A' :
                verifyCert = myoptarg;
                break;

            case 'c' :
                ourCert = myoptarg;
                break;

            case 'k' :
                ourKey = myoptarg;
                break;

            case 'D' :
                #ifndef NO_DH
                    ourDhParam = myoptarg;
                #endif
                break;

            case 'Z' :
                #ifndef NO_DH
                    minDhKeyBits = atoi(myoptarg);
                    if (minDhKeyBits <= 0 || minDhKeyBits > 16000) {
                        Usage();
                        exit(MY_EX_USAGE);
                    }
                #endif
                break;

            case 'N':
                nonBlocking = 1;
                break;

            case 'S' :
                #ifdef HAVE_SNI
                    sniHostName = myoptarg;
                #endif
                break;

            case 'o' :
                #ifdef HAVE_OCSP
                    useOcsp = 1;
                #endif
                break;

            case 'O' :
                #ifdef HAVE_OCSP
                    useOcsp = 1;
                    ocspUrl = myoptarg;
                #endif
                break;

            case 'a' :
                #ifdef HAVE_ANON
                    useAnon = 1;
                #endif
                break;
            case 'I':
                #ifndef NO_PSK
                    sendPskIdentityHint = 0;
                #endif
                break;

            case 'L' :
                #ifdef HAVE_ALPN
                    alpnList = myoptarg;

                    if (alpnList[0] == 'C' && alpnList[1] == ':')
                        alpn_opt = WOLFSSL_ALPN_CONTINUE_ON_MISMATCH;
                    else if (alpnList[0] == 'F' && alpnList[1] == ':')
                        alpn_opt = WOLFSSL_ALPN_FAILED_ON_MISMATCH;
                    else {
                        Usage();
                        exit(MY_EX_USAGE);
                    }

                    alpnList += 2;

                #endif
                break;

            case 'i' :
                loopIndefinitely = 1;
                break;

            case 'e' :
                echoData = 1;
                break;

            case 'B':
                throughput = atoi(myoptarg);
                if (throughput <= 0) {
                    Usage();
                    exit(MY_EX_USAGE);
                }
                break;

            #ifdef WOLFSSL_TRUST_PEER_CERT
            case 'E' :
                 trustCert = myoptarg;
                break;
            #endif

            default:
                Usage();
                exit(MY_EX_USAGE);
        }
    }

    myoptind = 0;      /* reset for test cases */
#endif /* !WOLFSSL_VXWORKS */

    /* sort out DTLS versus TLS versions */
    if (version == CLIENT_INVALID_VERSION) {
        if (doDTLS)
            version = CLIENT_DTLS_DEFAULT_VERSION;
        else
            version = CLIENT_DEFAULT_VERSION;
    }
    else {
        if (doDTLS) {
            if (version == 3)
                version = -2;
            else
                version = -1;
        }
    }

#ifdef USE_CYASSL_MEMORY
    if (trackMemory)
        InitMemoryTracker();
#endif

    switch (version) {
#ifndef NO_OLD_TLS
    #ifdef WOLFSSL_ALLOW_SSLV3
        case 0:
            method = SSLv3_server_method();
            break;
    #endif

    #ifndef NO_TLS
        case 1:
            method = TLSv1_server_method();
            break;


        case 2:
            method = TLSv1_1_server_method();
            break;

        #endif
#endif

#ifndef NO_TLS
        case 3:
            method = TLSv1_2_server_method();
            break;
#endif

#ifdef CYASSL_DTLS
    #ifndef NO_OLD_TLS
        case -1:
            method = DTLSv1_server_method();
            break;
    #endif

        case -2:
            method = DTLSv1_2_server_method();
            break;
#endif

        default:
            err_sys("Bad SSL version");
    }

    if (method == NULL)
        err_sys("unable to get method");

    ctx = SSL_CTX_new(method);
    if (ctx == NULL)
        err_sys("unable to get ctx");

#if defined(HAVE_SESSION_TICKET) && defined(HAVE_CHACHA) && \
                                    defined(HAVE_POLY1305)
    if (TicketInit() != 0)
        err_sys("unable to setup Session Ticket Key context");
    wolfSSL_CTX_set_TicketEncCb(ctx, myTicketEncCb);
#endif

    if (cipherList)
        if (SSL_CTX_set_cipher_list(ctx, cipherList) != SSL_SUCCESS)
            err_sys("server can't set cipher list 1");

#ifdef CYASSL_LEANPSK
    if (!usePsk) {
        usePsk = 1;
    }
#endif

#if defined(NO_RSA) && !defined(HAVE_ECC)
    if (!usePsk) {
        usePsk = 1;
    }
#endif

    if (fewerPackets)
        CyaSSL_CTX_set_group_messages(ctx);

#if defined(OPENSSL_EXTRA) || defined(HAVE_WEBSERVER)
    SSL_CTX_set_default_passwd_cb(ctx, PasswordCallBack);
#endif

#if !defined(NO_FILESYSTEM) && !defined(NO_CERTS)
    if ((!usePsk || usePskPlus) && !useAnon) {
        if (SSL_CTX_use_certificate_chain_file(ctx, ourCert)
                                         != SSL_SUCCESS)
            err_sys("can't load server cert file, check file and run from"
                    " wolfSSL home dir");
    }
#endif

#ifndef NO_DH
    if (wolfSSL_CTX_SetMinDhKey_Sz(ctx, (word16)minDhKeyBits) != SSL_SUCCESS) {
        err_sys("Error setting minimum DH key size");
    }
#endif
#ifndef NO_RSA
    if (wolfSSL_CTX_SetMinRsaKey_Sz(ctx, minRsaKeyBits) != SSL_SUCCESS){
        err_sys("Error setting minimum RSA key size");
    }
#endif
#ifdef HAVE_ECC
    if (wolfSSL_CTX_SetMinEccKey_Sz(ctx, minEccKeyBits) != SSL_SUCCESS){
        err_sys("Error setting minimum ECC key size");
    }
#endif

#ifdef HAVE_NTRU
    if (useNtruKey) {
        if (CyaSSL_CTX_use_NTRUPrivateKey_file(ctx, ourKey)
                                != SSL_SUCCESS)
            err_sys("can't load ntru key file, "
                    "Please run from wolfSSL home dir");
    }
#endif
#if !defined(NO_FILESYSTEM) && !defined(NO_CERTS)
    if (!useNtruKey && (!usePsk || usePskPlus) && !useAnon) {
        if (SSL_CTX_use_PrivateKey_file(ctx, ourKey, SSL_FILETYPE_PEM)
                                         != SSL_SUCCESS)
            err_sys("can't load server private key file, check file and run "
                "from wolfSSL home dir");
    }
#endif

    if (usePsk || usePskPlus) {
#ifndef NO_PSK
        SSL_CTX_set_psk_server_callback(ctx, my_psk_server_cb);

        if (sendPskIdentityHint == 1)
            SSL_CTX_use_psk_identity_hint(ctx, "cyassl server");

        if (cipherList == NULL && !usePskPlus) {
            const char *defaultCipherList;
            #if defined(HAVE_AESGCM) && !defined(NO_DH)
                defaultCipherList = "DHE-PSK-AES128-GCM-SHA256";
                needDH = 1;
            #elif defined(HAVE_NULL_CIPHER)
                defaultCipherList = "PSK-NULL-SHA256";
            #else
                defaultCipherList = "PSK-AES128-CBC-SHA256";
            #endif
            if (SSL_CTX_set_cipher_list(ctx, defaultCipherList) != SSL_SUCCESS)
                err_sys("server can't set cipher list 2");
        }
#endif
    }

    if (useAnon) {
#ifdef HAVE_ANON
        CyaSSL_CTX_allow_anon_cipher(ctx);
        if (cipherList == NULL) {
            if (SSL_CTX_set_cipher_list(ctx, "ADH-AES128-SHA") != SSL_SUCCESS)
                err_sys("server can't set cipher list 4");
        }
#endif
    }

#if !defined(NO_FILESYSTEM) && !defined(NO_CERTS)
    /* if not using PSK, verify peer with certs
       if using PSK Plus then verify peer certs except PSK suites */
    if (doCliCertCheck && (usePsk == 0 || usePskPlus) && useAnon == 0) {
        SSL_CTX_set_verify(ctx, SSL_VERIFY_PEER |
                                ((usePskPlus)? SSL_VERIFY_FAIL_EXCEPT_PSK :
                                SSL_VERIFY_FAIL_IF_NO_PEER_CERT),0);
        if (SSL_CTX_load_verify_locations(ctx, verifyCert, 0) != SSL_SUCCESS)
            err_sys("can't load ca file, Please run from wolfSSL home dir");
        #ifdef WOLFSSL_TRUST_PEER_CERT
        if (trustCert) {
            if ((ret = wolfSSL_CTX_trust_peer_cert(ctx, trustCert,
                                            SSL_FILETYPE_PEM)) != SSL_SUCCESS) {
                err_sys("can't load trusted peer cert file");
            }
        }
        #endif /* WOLFSSL_TRUST_PEER_CERT */
   }
#endif

#if defined(CYASSL_SNIFFER)
    /* don't use EDH, can't sniff tmp keys */
    if (cipherList == NULL) {
        if (SSL_CTX_set_cipher_list(ctx, "AES128-SHA") != SSL_SUCCESS)
            err_sys("server can't set cipher list 3");
    }
#endif

#ifdef HAVE_SNI
    if (sniHostName)
        if (CyaSSL_CTX_UseSNI(ctx, CYASSL_SNI_HOST_NAME, sniHostName,
                                           XSTRLEN(sniHostName)) != SSL_SUCCESS)
            err_sys("UseSNI failed");
#endif

#ifdef USE_WINDOWS_API
    if (port == 0) {
        /* Generate random port for testing */
        port = GetRandomPort();
    }
#endif /* USE_WINDOWS_API */

    while (1) {
        /* allow resume option */
        if(resumeCount > 1) {
            if (doDTLS == 0) {
                SOCKADDR_IN_T client;
                socklen_t client_len = sizeof(client);
                clientfd = accept(sockfd, (struct sockaddr*)&client,
                                 (ACCEPT_THIRD_T)&client_len);
            } else {
                tcp_listen(&sockfd, &port, useAnyAddr, doDTLS);
                clientfd = sockfd;
            }
            if(WOLFSSL_SOCKET_IS_INVALID(clientfd)) {
                err_sys("tcp accept failed");
            }
        }

        ssl = SSL_new(ctx);
        if (ssl == NULL)
            err_sys("unable to get SSL");

#ifndef NO_HANDSHAKE_DONE_CB
        wolfSSL_SetHsDoneCb(ssl, myHsDoneCb, NULL);
#endif
#ifdef HAVE_CRL
#ifdef HAVE_CRL_MONITOR
        crlFlags = CYASSL_CRL_MONITOR | CYASSL_CRL_START_MON;
#endif
        if (CyaSSL_EnableCRL(ssl, 0) != SSL_SUCCESS)
            err_sys("unable to enable CRL");
        if (CyaSSL_LoadCRL(ssl, crlPemDir, SSL_FILETYPE_PEM, crlFlags)
                                                                 != SSL_SUCCESS)
            err_sys("unable to load CRL");
        if (CyaSSL_SetCRL_Cb(ssl, CRL_CallBack) != SSL_SUCCESS)
            err_sys("unable to set CRL callback url");
#endif
#ifdef HAVE_OCSP
        if (useOcsp) {
            if (ocspUrl != NULL) {
                CyaSSL_CTX_SetOCSP_OverrideURL(ctx, ocspUrl);
                CyaSSL_CTX_EnableOCSP(ctx, CYASSL_OCSP_NO_NONCE
                                                        | CYASSL_OCSP_URL_OVERRIDE);
            }
            else
                CyaSSL_CTX_EnableOCSP(ctx, CYASSL_OCSP_NO_NONCE);
        }
#endif
#if defined(HAVE_CERTIFICATE_STATUS_REQUEST) \
 || defined(HAVE_CERTIFICATE_STATUS_REQUEST_V2)
        if (wolfSSL_CTX_EnableOCSPStapling(ctx) != SSL_SUCCESS)
            err_sys("can't enable OCSP Stapling Certificate Manager");
        if (SSL_CTX_load_verify_locations(ctx, "certs/ocsp/intermediate1-ca-cert.pem", 0) != SSL_SUCCESS)
            err_sys("can't load ca file, Please run from wolfSSL home dir");
        if (SSL_CTX_load_verify_locations(ctx, "certs/ocsp/intermediate2-ca-cert.pem", 0) != SSL_SUCCESS)
            err_sys("can't load ca file, Please run from wolfSSL home dir");
        if (SSL_CTX_load_verify_locations(ctx, "certs/ocsp/intermediate3-ca-cert.pem", 0) != SSL_SUCCESS)
            err_sys("can't load ca file, Please run from wolfSSL home dir");
#endif
#ifdef HAVE_PK_CALLBACKS
        if (pkCallbacks)
            SetupPkCallbacks(ctx, ssl);
#endif

        /* do accept */
        readySignal = ((func_args*)args)->signal;
        if (readySignal) {
            readySignal->srfName = serverReadyFile;
        }
        tcp_accept(&sockfd, &clientfd, (func_args*)args, port, useAnyAddr,
                       doDTLS, serverReadyFile ? 1 : 0, doListen);
        doListen = 0; /* Don't listen next time */

        if (SSL_set_fd(ssl, clientfd) != SSL_SUCCESS) {
            err_sys("error in setting fd");
        }

#ifdef HAVE_ALPN
        if (alpnList != NULL) {
            printf("ALPN accepted protocols list : %s\n", alpnList);
            wolfSSL_UseALPN(ssl, alpnList, (word32)XSTRLEN(alpnList), alpn_opt);
        }
#endif

#ifdef WOLFSSL_DTLS
        if (doDTLS) {
            SOCKADDR_IN_T cliaddr;
            byte          b[1500];
            int           n;
            socklen_t     len = sizeof(cliaddr);

            /* For DTLS, peek at the next datagram so we can get the client's
             * address and set it into the ssl object later to generate the
             * cookie. */
            n = (int)recvfrom(sockfd, (char*)b, sizeof(b), MSG_PEEK,
                              (struct sockaddr*)&cliaddr, &len);
            if (n <= 0)
                err_sys("recvfrom failed");

            wolfSSL_dtls_set_peer(ssl, &cliaddr, len);
        }
#endif
        if ((usePsk == 0 || usePskPlus) || useAnon == 1 || cipherList != NULL
                                                               || needDH == 1) {
            #if !defined(NO_FILESYSTEM) && !defined(NO_DH) && !defined(NO_ASN)
                CyaSSL_SetTmpDH_file(ssl, ourDhParam, SSL_FILETYPE_PEM);
            #elif !defined(NO_DH)
                SetDH(ssl);  /* repick suites with DHE, higher priority than PSK */
            #endif
        }

#ifndef CYASSL_CALLBACKS
        if (nonBlocking) {
            CyaSSL_set_using_nonblock(ssl, 1);
            tcp_set_nonblocking(&clientfd);
        }
#endif

        do {
#ifdef WOLFSSL_ASYNC_CRYPT
            if (err == WC_PENDING_E) {
                ret = AsyncCryptPoll(ssl);
                if (ret < 0) { break; } else if (ret == 0) { continue; }
            }
#endif

            err = 0; /* Reset error */
#ifndef CYASSL_CALLBACKS
            if (nonBlocking) {
                ret = NonBlockingSSL_Accept(ssl);
            }
            else {
                ret = SSL_accept(ssl);
            }
#else
            ret = NonBlockingSSL_Accept(ssl);
#endif
            if (ret != SSL_SUCCESS) {
                err = SSL_get_error(ssl, 0);
            }
        } while (ret != SSL_SUCCESS && err == WC_PENDING_E);

        if (ret != SSL_SUCCESS) {
            char buffer[CYASSL_MAX_ERROR_SZ];
            err = SSL_get_error(ssl, 0);
            printf("error = %d, %s\n", err, ERR_error_string(err, buffer));
            err_sys("SSL_accept failed");
        }

        showPeer(ssl);

#ifdef HAVE_ALPN
        if (alpnList != NULL) {
            char *protocol_name = NULL, *list = NULL;
            word16 protocol_nameSz = 0, listSz = 0;

            err = wolfSSL_ALPN_GetProtocol(ssl, &protocol_name, &protocol_nameSz);
            if (err == SSL_SUCCESS)
                printf("Sent ALPN protocol : %s (%d)\n",
                       protocol_name, protocol_nameSz);
            else if (err == SSL_ALPN_NOT_FOUND)
                printf("No ALPN response sent (no match)\n");
            else
                printf("Getting ALPN protocol name failed\n");

            err = wolfSSL_ALPN_GetPeerProtocol(ssl, &list, &listSz);
            if (err == SSL_SUCCESS)
                printf("List of protocol names sent by Client: %s (%d)\n",
                       list, listSz);
            else
                printf("Get list of client's protocol name failed\n");

            free(list);
        }
#endif
        if(echoData == 0 && throughput == 0) {
            ret = SSL_read(ssl, input, sizeof(input)-1);
            if (ret > 0) {
                input[ret] = 0;
                printf("Client message: %s\n", input);

            }
            else if (ret < 0) {
                int readErr = SSL_get_error(ssl, 0);
                if (readErr != SSL_ERROR_WANT_READ)
                    err_sys("SSL_read failed");
            }

            if (SSL_write(ssl, msg, sizeof(msg)) != sizeof(msg))
                err_sys("SSL_write failed");
        }
        else {
            ServerEchoData(ssl, clientfd, echoData, throughput);
        }

#if defined(WOLFSSL_MDK_SHELL) && defined(HAVE_MDK_RTX)
        os_dly_wait(500) ;
#elif defined (CYASSL_TIRTOS)
        Task_yield();
#endif

        if (doDTLS == 0) {
            ret = SSL_shutdown(ssl);
            if (wc_shutdown && ret == SSL_SHUTDOWN_NOT_DONE)
                SSL_shutdown(ssl);    /* bidirectional shutdown */
        }
        SSL_free(ssl);

        CloseSocket(clientfd);

        if (resume == 1 && resumeCount == 0) {
            resumeCount++;           /* only do one resume for testing */
            continue;
        }
        resumeCount = 0;

        if(!loopIndefinitely) {
            break;  /* out of while loop, done with normal and resume option */
        }
    } /* while(1) */

    CloseSocket(sockfd);
    SSL_CTX_free(ctx);

    ((func_args*)args)->return_code = 0;


#if defined(NO_MAIN_DRIVER) && defined(HAVE_ECC) && defined(FP_ECC) \
                            && defined(HAVE_THREAD_LS)
    ecc_fp_free();  /* free per thread cache */
#endif

#ifdef USE_WOLFSSL_MEMORY
    if (trackMemory)
        ShowMemoryTracker();
#endif

#ifdef CYASSL_TIRTOS
    fdCloseSession(Task_self());
#endif

#if defined(HAVE_SESSION_TICKET) && defined(HAVE_CHACHA) && \
                                    defined(HAVE_POLY1305)
    TicketCleanup();
#endif

    /* There are use cases  when these assignments are not read. To avoid
     * potential confusion those warnings have been handled here.
     */
    (void) ourKey;
    (void) verifyCert;
    (void) doCliCertCheck;
    (void) useNtruKey;
    (void) ourDhParam;
    (void) ourCert;
#ifndef CYASSL_TIRTOS
    return 0;
#endif
}
示例#13
0
static int _tls_session_init_client(tls_session_t *s, int sockfd,
				    const tls_init_config_t *cfg)
{
	int ret;
	SSL_METHOD *method;

#if defined(CYASSL_DTLS)
	method = DTLSv1_client_method();
#elif !defined(NO_TLS)
	method = SSLv23_client_method();
#else
	method = SSLv3_client_method();
#endif

	s->ctx = SSL_CTX_new(method);

#ifndef NO_PSK
	SSL_CTX_set_psk_client_callback(s->ctx, my_psk_client_cb);
#endif

#if defined(CYASSL_SNIFFER) && !defined(HAVE_NTRU) && !defined(HAVE_ECC)
	/* don't use EDH, can't sniff tmp keys */
	SSL_CTX_set_cipher_list(s->ctx, "AES256-SHA");
#endif

	if (cfg->flags & TLS_CHECK_SERVER_CERT) {
		ASSERT(cfg->tls.client.ca_cert_size != 0);
		/* Load server certificates  from buffer */
		tls_d("Loading CA certificate file. Size: %d",
		      cfg->tls.client.ca_cert_size);
		ret = CyaSSL_CTX_load_verify_buffer(s->ctx,
						    cfg->tls.client.ca_cert,
						    cfg->tls.client.
						    ca_cert_size,
						    SSL_FILETYPE_PEM);
		if (ret != SSL_SUCCESS) {
			tls_e("Unable to load CA certificate");
			SSL_CTX_free(s->ctx);
			return -WM_FAIL;
		}
	} else {
		tls_d("Disabling certificate check");
		SSL_CTX_set_verify(s->ctx, SSL_VERIFY_NONE, 0);
	}

	if (cfg->flags & TLS_USE_CLIENT_CERT) {

		/* The server wants to verify our certificates */
		ASSERT(cfg->tls.client.client_cert_size != 0);
		ASSERT(cfg->tls.client.client_key_size != 0);

		/* Load client certificates and client private keys from
		   buffer */
		tls_d("Loading client certificate buffer. Size: %d",
		      cfg->tls.client.client_cert_size);
		ret = CyaSSL_CTX_use_certificate_buffer(s->ctx,
							cfg->tls.client.
							client_cert,
							cfg->tls.client.
							client_cert_size,
							SSL_FILETYPE_PEM);
		if (ret != SSL_SUCCESS) {
			tls_e("Unable to load client certificate");
			SSL_CTX_free(s->ctx);
			return -WM_FAIL;
		}

		tls_d("Loading client private key buffer. Size: %d",
		      cfg->tls.client.client_key_size);
		ret = CyaSSL_CTX_use_PrivateKey_buffer(s->ctx,
						       cfg->tls.client.
						       client_key,
						       cfg->tls.client.
						       client_key_size,
						       SSL_FILETYPE_PEM);
		if (ret != SSL_SUCCESS) {
			tls_e("Unable to load client key");
			SSL_CTX_free(s->ctx);
			return -WM_FAIL;
		}
	}

	s->ssl = SSL_new(s->ctx);
	SSL_set_fd(s->ssl, sockfd);

#ifdef CONFIG_WPA2_ENTP
	if (cfg->flags & TLS_WPA2_ENTP) {
		CyaSSL_SetIOSend(s->ctx, SSLSend);
		CyaSSL_SetIORecv(s->ctx, SSLReceive);
	}
#endif

#ifdef NON_BLOCKING
	tcp_set_nonblocking(&sockfd);
	NonBlockingSSL_Connect(s->ssl);
#else
#ifndef CYASSL_CALLBACKS
	tls_d("Starting SSL connect");
	/* see note at top of README */
	if (SSL_connect(s->ssl) != SSL_SUCCESS) {
#ifdef CONFIG_ENABLE_ERROR_LOGS
		int err = SSL_get_error(s->ssl, 0);
		char buffer[80];
		tls_e("err = %d, %s", err, ERR_error_string(err, buffer));
		/* if you're getting an error here  */
		tls_e("SSL_connect failed");
#endif /* CONFIG_ENABLE_ERROR_LOGS */
		SSL_free(s->ssl);
		SSL_CTX_free(s->ctx);
		return -WM_FAIL;
	}
#else
	timeout.tv_sec = 2;
	timeout.tv_usec = 0;
	NonBlockingSSL_Connect(s->ssl);	/* will keep retrying on timeout */
#endif
#endif
	showPeer(s->ssl);

	s->session_setup_done = true;

	tls_d("SSL Connect success");

#ifdef CONFIG_WPA2_ENTP
	if (cfg->flags & TLS_WPA2_ENTP)
		return tls_session_success(s);
#endif

	return WM_SUCCESS;
}
示例#14
0
void client_test(void* args)
{
    SOCKET_T sockfd = 0;

    SSL_METHOD*  method  = 0;
    SSL_CTX*     ctx     = 0;
    SSL*         ssl     = 0;
    
#ifdef TEST_RESUME
    SSL*         sslResume = 0;
    SSL_SESSION* session = 0;
    char         resumeMsg[] = "resuming cyassl!";
    int          resumeSz    = sizeof(resumeMsg);
#endif

    char msg[64] = "hello cyassl!";
    char reply[1024];
    int  input;
    int  msgSz = strlen(msg);

    int     argc = ((func_args*)args)->argc;
    char**  argv = ((func_args*)args)->argv;

    ((func_args*)args)->return_code = -1; /* error state */

#if defined(CYASSL_DTLS)
    method  = DTLSv1_client_method();
#elif  !defined(NO_TLS)
    method  = SSLv23_client_method();
#else
    method  = SSLv3_client_method();
#endif
    ctx     = SSL_CTX_new(method);

#ifndef NO_PSK
    SSL_CTX_set_psk_client_callback(ctx, my_psk_client_cb);
#endif

#ifdef OPENSSL_EXTRA
    SSL_CTX_set_default_passwd_cb(ctx, PasswordCallBack);
#endif

#ifdef CYASSL_SNIFFER
    /* don't use EDH, can't sniff tmp keys */
    SSL_CTX_set_cipher_list(ctx, "AES256-SHA");
#endif

#ifndef NO_FILESYSTEM
    if (SSL_CTX_load_verify_locations(ctx, caCert, 0) != SSL_SUCCESS)
        err_sys("can't load ca file");
    #ifdef HAVE_ECC
        if (SSL_CTX_load_verify_locations(ctx, eccCert, 0) != SSL_SUCCESS)
            err_sys("can't load ca file");
    #endif
#else
    load_buffer(ctx, caCert, CYASSL_CA);
#endif

#ifdef VERIFY_CALLBACK
    SSL_CTX_set_verify(ctx, SSL_VERIFY_PEER, myVerify);
#endif

    if (argc == 3) {
        /*  ./client server securePort  */
        SSL_CTX_set_verify(ctx, SSL_VERIFY_NONE, 0);  /* TODO: add ca cert */
                    /* this is just to allow easy testing of other servers */
        tcp_connect(&sockfd, argv[1], (short)atoi(argv[2]));
    }
    else if (argc == 1) {
        /* ./client          // plain mode */
        /* for client cert authentication if server requests */
#ifndef NO_FILESYSTEM
        if (SSL_CTX_use_certificate_file(ctx, cliCert, SSL_FILETYPE_PEM)
                != SSL_SUCCESS)
            err_sys("can't load client cert file");

        if (SSL_CTX_use_PrivateKey_file(ctx, cliKey, SSL_FILETYPE_PEM)
                != SSL_SUCCESS)
            err_sys("can't load client key file");
#else
        load_buffer(ctx, cliCert, CYASSL_CERT);
        load_buffer(ctx, cliKey, CYASSL_KEY);
#endif

        tcp_connect(&sockfd, yasslIP, yasslPort);
    }
    else if (argc == 2) {
        /* time passed in number of connects give average */
        int times = atoi(argv[1]);
        int i = 0;

        double start = current_time(), avg;

        for (i = 0; i < times; i++) {
            tcp_connect(&sockfd, yasslIP, yasslPort);
            ssl = SSL_new(ctx);
            SSL_set_fd(ssl, sockfd);
            if (SSL_connect(ssl) != SSL_SUCCESS)
                err_sys("SSL_connect failed");

            SSL_shutdown(ssl);
            SSL_free(ssl);
            CloseSocket(sockfd);
        }
        avg = current_time() - start;
        avg /= times;
        avg *= 1000;    /* milliseconds */  
        printf("SSL_connect avg took:%6.3f milliseconds\n", avg);

        SSL_CTX_free(ctx);
        ((func_args*)args)->return_code = 0;
        return;
    }
    else
        err_sys("usage: ./client server securePort");

    ssl = SSL_new(ctx);
    SSL_set_fd(ssl, sockfd);
    if (argc != 3)
        CyaSSL_check_domain_name(ssl, "www.yassl.com");
#ifdef NON_BLOCKING
    tcp_set_nonblocking(&sockfd);
    NonBlockingSSL_Connect(ssl);
#else
    #ifndef CYASSL_CALLBACKS
        if (SSL_connect(ssl) != SSL_SUCCESS) { /* see note at top of README */
            int  err = SSL_get_error(ssl, 0);
            char buffer[80];
            printf("err = %d, %s\n", err, ERR_error_string(err, buffer));
            err_sys("SSL_connect failed");/* if you're getting an error here  */
        }
    #else
        timeout.tv_sec  = 2;
        timeout.tv_usec = 0;
        NonBlockingSSL_Connect(ssl);  /* will keep retrying on timeout */
    #endif
#endif
    showPeer(ssl);
    
    if (argc == 3) {
        printf("SSL connect ok, sending GET...\n");
        msgSz = 28;
        strncpy(msg, "GET /index.html HTTP/1.0\r\n\r\n", msgSz);
    }
    if (SSL_write(ssl, msg, msgSz) != msgSz)
        err_sys("SSL_write failed");

    input = SSL_read(ssl, reply, sizeof(reply));
    if (input > 0) {
        reply[input] = 0;
        printf("Server response: %s\n", reply);

        if (argc == 3) {  /* get html */
            while (1) {
                input = SSL_read(ssl, reply, sizeof(reply));
                if (input > 0) {
                    reply[input] = 0;
                    printf("%s\n", reply);
                }
                else
                    break;
            }
        }
    }
  
#ifdef TEST_RESUME
    #ifdef CYASSL_DTLS
        strncpy(msg, "break", 6);
        msgSz = (int)strlen(msg);
        /* try to send session close */
        SSL_write(ssl, msg, msgSz);
    #endif
    session   = SSL_get_session(ssl);
    sslResume = SSL_new(ctx);
#endif

    SSL_shutdown(ssl);
    SSL_free(ssl);
    CloseSocket(sockfd);

#ifdef TEST_RESUME
    #ifdef CYASSL_DTLS
        #ifdef USE_WINDOWS_API 
            Sleep(500);
        #else
            sleep(1);
        #endif
    #endif
    if (argc == 3)
        tcp_connect(&sockfd, argv[1], (short)atoi(argv[2]));
    else
        tcp_connect(&sockfd, yasslIP, yasslPort);
    SSL_set_fd(sslResume, sockfd);
    SSL_set_session(sslResume, session);
   
    showPeer(sslResume); 
    if (SSL_connect(sslResume) != SSL_SUCCESS) err_sys("SSL resume failed");

#ifdef OPENSSL_EXTRA
    if (SSL_session_reused(sslResume))
        printf("reused session id\n");
    else
        printf("didn't reuse session id!!!\n");
#endif
  
    if (SSL_write(sslResume, resumeMsg, resumeSz) != resumeSz)
        err_sys("SSL_write failed");

    input = SSL_read(sslResume, reply, sizeof(reply));
    if (input > 0) {
        reply[input] = 0;
        printf("Server resume response: %s\n", reply);
    }

    /* try to send session break */
    SSL_write(sslResume, msg, msgSz); 

    SSL_shutdown(sslResume);
    SSL_free(sslResume);
#endif /* TEST_RESUME */

    SSL_CTX_free(ctx);
    CloseSocket(sockfd);

    ((func_args*)args)->return_code = 0;
}
示例#15
0
THREAD_RETURN WOLFSSL_THREAD client_test(void* args)
{
    SOCKET_T sockfd = WOLFSSL_SOCKET_INVALID;

    WOLFSSL_METHOD*  method  = 0;
    WOLFSSL_CTX*     ctx     = 0;
    WOLFSSL*         ssl     = 0;

    WOLFSSL*         sslResume = 0;
    WOLFSSL_SESSION* session = 0;
    char         resumeMsg[32] = "resuming wolfssl!";
    int          resumeSz    = (int)strlen(resumeMsg);

    char msg[32] = "hello wolfssl!";   /* GET may make bigger */
    char reply[80];
    int  input;
    int  msgSz = (int)strlen(msg);

    word16 port   = wolfSSLPort;
    char* host   = (char*)wolfSSLIP;
    const char* domain = "localhost";  /* can't default to www.wolfssl.com
                                          because can't tell if we're really
                                          going there to detect old chacha-poly
                                       */
    int    ch;
    int    version = CLIENT_INVALID_VERSION;
    int    usePsk   = 0;
    int    useAnon  = 0;
    int    sendGET  = 0;
    int    benchmark = 0;
    int    throughput = 0;
    int    doDTLS    = 0;
    int    matchName = 0;
    int    doPeerCheck = 1;
    int    nonBlocking = 0;
    int    resumeSession = 0;
    int    wc_shutdown   = 0;
    int    disableCRL    = 0;
    int    externalTest  = 0;
    int    ret;
    int    scr           = 0;    /* allow secure renegotiation */
    int    forceScr      = 0;    /* force client initiaed scr */
    int    trackMemory   = 0;
    int    useClientCert = 1;
    int    fewerPackets  = 0;
    int    atomicUser    = 0;
    int    pkCallbacks   = 0;
    int    overrideDateErrors = 0;
    int    minDhKeyBits  = DEFAULT_MIN_DHKEY_BITS;
    char*  alpnList = NULL;
    unsigned char alpn_opt = 0;
    char*  cipherList = NULL;
    const char* verifyCert = caCert;
    const char* ourCert    = cliCert;
    const char* ourKey     = cliKey;

#ifdef HAVE_SNI
    char*  sniHostName = NULL;
#endif
#ifdef HAVE_MAX_FRAGMENT
    byte maxFragment = 0;
#endif
#ifdef HAVE_TRUNCATED_HMAC
    byte truncatedHMAC = 0;
#endif
#if defined(HAVE_CERTIFICATE_STATUS_REQUEST) \
 || defined(HAVE_CERTIFICATE_STATUS_REQUEST_V2)
    byte statusRequest = 0;
#endif


#ifdef HAVE_OCSP
    int    useOcsp  = 0;
    char*  ocspUrl  = NULL;
#endif

    int     argc = ((func_args*)args)->argc;
    char**  argv = ((func_args*)args)->argv;

    ((func_args*)args)->return_code = -1; /* error state */

#ifdef NO_RSA
    verifyCert = (char*)eccCert;
    ourCert    = (char*)cliEccCert;
    ourKey     = (char*)cliEccKey;
#endif
    (void)resumeSz;
    (void)session;
    (void)sslResume;
    (void)trackMemory;
    (void)atomicUser;
    (void)pkCallbacks;
    (void)scr;
    (void)forceScr;
    (void)ourKey;
    (void)ourCert;
    (void)verifyCert;
    (void)useClientCert;
    (void)overrideDateErrors;
    (void)disableCRL;
    (void)minDhKeyBits;
    (void)alpnList;
    (void)alpn_opt;

    StackTrap();

#ifndef WOLFSSL_VXWORKS
    while ((ch = mygetopt(argc, argv,
            "?gdeDusmNrwRitfxXUPCVh:p:v:l:A:c:k:Z:b:zS:F:L:ToO:aB:W:")) != -1) {
        switch (ch) {
            case '?' :
                Usage();
                exit(EXIT_SUCCESS);

            case 'g' :
                sendGET = 1;
                break;

            case 'd' :
                doPeerCheck = 0;
                break;

            case 'e' :
                ShowCiphers();
                exit(EXIT_SUCCESS);

            case 'D' :
                overrideDateErrors = 1;
                break;

            case 'C' :
                #ifdef HAVE_CRL
                    disableCRL = 1;
                #endif
                break;

            case 'u' :
                doDTLS  = 1;
                break;

            case 's' :
                usePsk = 1;
                break;

            case 't' :
            #ifdef USE_WOLFSSL_MEMORY
                trackMemory = 1;
            #endif
                break;

            case 'm' :
                matchName = 1;
                break;

            case 'x' :
                useClientCert = 0;
                break;

            case 'X' :
                externalTest = 1;
                break;

            case 'f' :
                fewerPackets = 1;
                break;

            case 'U' :
            #ifdef ATOMIC_USER
                atomicUser = 1;
            #endif
                break;

            case 'P' :
            #ifdef HAVE_PK_CALLBACKS
                pkCallbacks = 1;
            #endif
                break;

            case 'h' :
                host   = myoptarg;
                domain = myoptarg;
                break;

            case 'p' :
                port = (word16)atoi(myoptarg);
                #if !defined(NO_MAIN_DRIVER) || defined(USE_WINDOWS_API)
                    if (port == 0)
                        err_sys("port number cannot be 0");
                #endif
                break;

            case 'v' :
                version = atoi(myoptarg);
                if (version < 0 || version > 3) {
                    Usage();
                    exit(MY_EX_USAGE);
                }
                break;

            case 'V' :
                ShowVersions();
                exit(EXIT_SUCCESS);

            case 'l' :
                cipherList = myoptarg;
                break;

            case 'A' :
                verifyCert = myoptarg;
                break;

            case 'c' :
                ourCert = myoptarg;
                break;

            case 'k' :
                ourKey = myoptarg;
                break;

            case 'Z' :
                #ifndef NO_DH
                    minDhKeyBits = atoi(myoptarg);
                    if (minDhKeyBits <= 0 || minDhKeyBits > 16000) {
                        Usage();
                        exit(MY_EX_USAGE);
                    }
                #endif
                break;

            case 'b' :
                benchmark = atoi(myoptarg);
                if (benchmark < 0 || benchmark > 1000000) {
                    Usage();
                    exit(MY_EX_USAGE);
                }
                break;

            case 'B' :
                throughput = atoi(myoptarg);
                if (throughput <= 0) {
                    Usage();
                    exit(MY_EX_USAGE);
                }
                break;

            case 'N' :
                nonBlocking = 1;
                break;

            case 'r' :
                resumeSession = 1;
                break;

            case 'w' :
                wc_shutdown = 1;
                break;

            case 'R' :
                #ifdef HAVE_SECURE_RENEGOTIATION
                    scr = 1;
                #endif
                break;

            case 'i' :
                #ifdef HAVE_SECURE_RENEGOTIATION
                    scr      = 1;
                    forceScr = 1;
                #endif
                break;

            case 'z' :
                #ifndef WOLFSSL_LEANPSK
                    wolfSSL_GetObjectSize();
                #endif
                break;

            case 'S' :
                #ifdef HAVE_SNI
                    sniHostName = myoptarg;
                #endif
                break;

            case 'F' :
                #ifdef HAVE_MAX_FRAGMENT
                    maxFragment = atoi(myoptarg);
                    if (maxFragment < WOLFSSL_MFL_2_9 ||
                                                maxFragment > WOLFSSL_MFL_2_13) {
                        Usage();
                        exit(MY_EX_USAGE);
                    }
                #endif
                break;

            case 'T' :
                #ifdef HAVE_TRUNCATED_HMAC
                    truncatedHMAC = 1;
                #endif
                break;

            case 'W' :
                #if defined(HAVE_CERTIFICATE_STATUS_REQUEST) \
                 || defined(HAVE_CERTIFICATE_STATUS_REQUEST_V2)
                    statusRequest = atoi(myoptarg);
                #endif
                break;

            case 'o' :
                #ifdef HAVE_OCSP
                    useOcsp = 1;
                #endif
                break;

            case 'O' :
                #ifdef HAVE_OCSP
                    useOcsp = 1;
                    ocspUrl = myoptarg;
                #endif
                break;

            case 'a' :
                #ifdef HAVE_ANON
                    useAnon = 1;
                #endif
                break;

            case 'L' :
                #ifdef HAVE_ALPN
                    alpnList = myoptarg;

                    if (alpnList[0] == 'C' && alpnList[1] == ':')
                        alpn_opt = WOLFSSL_ALPN_CONTINUE_ON_MISMATCH;
                    else if (alpnList[0] == 'F' && alpnList[1] == ':')
                        alpn_opt = WOLFSSL_ALPN_FAILED_ON_MISMATCH;
                    else {
                        Usage();
                        exit(MY_EX_USAGE);
                    }

                    alpnList += 2;

                #endif
                break;

            default:
                Usage();
                exit(MY_EX_USAGE);
        }
    }

    myoptind = 0;      /* reset for test cases */
#endif /* !WOLFSSL_VXWORKS */

    if (externalTest) {
        /* detect build cases that wouldn't allow test against wolfssl.com */
        int done = 0;
        (void)done;

        #ifdef NO_RSA
            done = 1;
        #endif

        /* www.globalsign.com does not respond to ipv6 ocsp requests */
        #if defined(TEST_IPV6) && defined(HAVE_OCSP)
            done = 1;
        #endif

        /* www.globalsign.com has limited supported cipher suites */
        #if defined(NO_AES) && defined(HAVE_OCSP)
            done = 1;
        #endif

        /* www.globalsign.com only supports static RSA or ECDHE with AES */
        /* We cannot expect users to have on static RSA so test for ECC only
         * as some users will most likely be on 32-bit systems where ECC
         * is not enabled by default */
        #if defined(HAVE_OCSP) && !defined(HAVE_ECC)
            done = 1;
        #endif

        #ifndef NO_PSK
            done = 1;
        #endif

        #ifdef NO_SHA
            done = 1;  /* external cert chain most likely has SHA */
        #endif

        #if !defined(HAVE_ECC) && !defined(WOLFSSL_STATIC_RSA)
            if (!XSTRNCMP(domain, "www.google.com", 14) ||
                !XSTRNCMP(domain, "www.wolfssl.com", 15)) {
                done = 1;  /* google/wolfssl need ECDHE or static RSA */
            }
        #endif

        #if !defined(WOLFSSL_SHA384)
            if (!XSTRNCMP(domain, "www.wolfssl.com", 15)) {
                done = 1;  /* wolfssl need sha384 for cert chain verify */
            }
        #endif

        #if !defined(HAVE_AESGCM) && defined(NO_AES) && \
            !(defined(HAVE_CHACHA) && defined(HAVE_POLY1305))
            done = 1;  /* need at least on of these for external tests */
        #endif

        if (done) {
            printf("external test can't be run in this mode");

            ((func_args*)args)->return_code = 0;
            exit(EXIT_SUCCESS);
        }
    }

    /* sort out DTLS versus TLS versions */
    if (version == CLIENT_INVALID_VERSION) {
        if (doDTLS)
            version = CLIENT_DTLS_DEFAULT_VERSION;
        else
            version = CLIENT_DEFAULT_VERSION;
    }
    else {
        if (doDTLS) {
            if (version == 3)
                version = -2;
            else
                version = -1;
        }
    }

#ifdef USE_WOLFSSL_MEMORY
    if (trackMemory)
        InitMemoryTracker();
#endif

    switch (version) {
#ifndef NO_OLD_TLS
    #ifdef WOLFSSL_ALLOW_SSLV3
        case 0:
            method = wolfSSLv3_client_method();
            break;
    #endif

    #ifndef NO_TLS
        case 1:
            method = wolfTLSv1_client_method();
            break;

        case 2:
            method = wolfTLSv1_1_client_method();
            break;
    #endif /* NO_TLS */

#endif  /* NO_OLD_TLS */

#ifndef NO_TLS
        case 3:
            method = wolfTLSv1_2_client_method();
            break;
#endif

#ifdef WOLFSSL_DTLS
        #ifndef NO_OLD_TLS
        case -1:
            method = wolfDTLSv1_client_method();
            break;
        #endif

        case -2:
            method = wolfDTLSv1_2_client_method();
            break;
#endif

        default:
            err_sys("Bad SSL version");
            break;
    }

    if (method == NULL)
        err_sys("unable to get method");

    ctx = wolfSSL_CTX_new(method);
    if (ctx == NULL)
        err_sys("unable to get ctx");

    if (cipherList) {
        if (wolfSSL_CTX_set_cipher_list(ctx, cipherList) != SSL_SUCCESS)
            err_sys("client can't set cipher list 1");
    }

#ifdef WOLFSSL_LEANPSK
    usePsk = 1;
#endif

#if defined(NO_RSA) && !defined(HAVE_ECC)
    usePsk = 1;
#endif

    if (fewerPackets)
        wolfSSL_CTX_set_group_messages(ctx);

#ifndef NO_DH
    wolfSSL_CTX_SetMinDhKey_Sz(ctx, (word16)minDhKeyBits);
#endif

    if (usePsk) {
#ifndef NO_PSK
        wolfSSL_CTX_set_psk_client_callback(ctx, my_psk_client_cb);
        if (cipherList == NULL) {
            const char *defaultCipherList;
            #if defined(HAVE_AESGCM) && !defined(NO_DH)
                defaultCipherList = "DHE-PSK-AES128-GCM-SHA256";
            #elif defined(HAVE_NULL_CIPHER)
                defaultCipherList = "PSK-NULL-SHA256";
            #else
                defaultCipherList = "PSK-AES128-CBC-SHA256";
            #endif
            if (wolfSSL_CTX_set_cipher_list(ctx,defaultCipherList)
                                                                  !=SSL_SUCCESS)
                err_sys("client can't set cipher list 2");
        }
#endif
        useClientCert = 0;
    }

    if (useAnon) {
#ifdef HAVE_ANON
        if (cipherList == NULL) {
            wolfSSL_CTX_allow_anon_cipher(ctx);
            if (wolfSSL_CTX_set_cipher_list(ctx,"ADH-AES128-SHA") != SSL_SUCCESS)
                err_sys("client can't set cipher list 4");
        }
#endif
        useClientCert = 0;
    }

#if defined(OPENSSL_EXTRA) || defined(HAVE_WEBSERVER)
    wolfSSL_CTX_set_default_passwd_cb(ctx, PasswordCallBack);
#endif

#if defined(WOLFSSL_SNIFFER)
    if (cipherList == NULL) {
        /* don't use EDH, can't sniff tmp keys */
        if (wolfSSL_CTX_set_cipher_list(ctx, "AES128-SHA") != SSL_SUCCESS) {
            err_sys("client can't set cipher list 3");
        }
    }
#endif

#ifdef HAVE_OCSP
    if (useOcsp) {
        if (ocspUrl != NULL) {
            wolfSSL_CTX_SetOCSP_OverrideURL(ctx, ocspUrl);
            wolfSSL_CTX_EnableOCSP(ctx, WOLFSSL_OCSP_NO_NONCE
                                                    | WOLFSSL_OCSP_URL_OVERRIDE);
        }
        else
            wolfSSL_CTX_EnableOCSP(ctx, 0);
    }
#endif

#ifdef USER_CA_CB
    wolfSSL_CTX_SetCACb(ctx, CaCb);
#endif

#ifdef VERIFY_CALLBACK
    wolfSSL_CTX_set_verify(ctx, SSL_VERIFY_PEER, myVerify);
#endif
#if !defined(NO_FILESYSTEM) && !defined(NO_CERTS)
    if (useClientCert){
        if (wolfSSL_CTX_use_certificate_chain_file(ctx, ourCert) != SSL_SUCCESS)
            err_sys("can't load client cert file, check file and run from"
                    " wolfSSL home dir");

        if (wolfSSL_CTX_use_PrivateKey_file(ctx, ourKey, SSL_FILETYPE_PEM)
                                         != SSL_SUCCESS)
            err_sys("can't load client private key file, check file and run "
                    "from wolfSSL home dir");
    }

    if (!usePsk && !useAnon) {
        if (wolfSSL_CTX_load_verify_locations(ctx, verifyCert,0) != SSL_SUCCESS)
            err_sys("can't load ca file, Please run from wolfSSL home dir");
#ifdef HAVE_ECC
        /* load ecc verify too, echoserver uses it by default w/ ecc */
        if (wolfSSL_CTX_load_verify_locations(ctx, eccCert, 0) != SSL_SUCCESS)
            err_sys("can't load ecc ca file, Please run from wolfSSL home dir");
#endif /* HAVE_ECC */
    }
#endif /* !NO_FILESYSTEM && !NO_CERTS */
#if !defined(NO_CERTS)
    if (!usePsk && !useAnon && doPeerCheck == 0)
        wolfSSL_CTX_set_verify(ctx, SSL_VERIFY_NONE, 0);
    if (!usePsk && !useAnon && overrideDateErrors == 1)
        wolfSSL_CTX_set_verify(ctx, SSL_VERIFY_PEER, myDateCb);
#endif

#ifdef HAVE_CAVIUM
    wolfSSL_CTX_UseCavium(ctx, CAVIUM_DEV_ID);
#endif

#ifdef HAVE_SNI
    if (sniHostName)
        if (wolfSSL_CTX_UseSNI(ctx, 0, sniHostName, XSTRLEN(sniHostName))
                                                                 != SSL_SUCCESS)
            err_sys("UseSNI failed");
#endif
#ifdef HAVE_MAX_FRAGMENT
    if (maxFragment)
        if (wolfSSL_CTX_UseMaxFragment(ctx, maxFragment) != SSL_SUCCESS)
            err_sys("UseMaxFragment failed");
#endif
#ifdef HAVE_TRUNCATED_HMAC
    if (truncatedHMAC)
        if (wolfSSL_CTX_UseTruncatedHMAC(ctx) != SSL_SUCCESS)
            err_sys("UseTruncatedHMAC failed");
#endif
#ifdef HAVE_SESSION_TICKET
    if (wolfSSL_CTX_UseSessionTicket(ctx) != SSL_SUCCESS)
        err_sys("UseSessionTicket failed");
#endif

    if (benchmark) {
        ((func_args*)args)->return_code =
            ClientBenchmarkConnections(ctx, host, port, doDTLS, benchmark, resumeSession);
        wolfSSL_CTX_free(ctx);
        exit(EXIT_SUCCESS);
    }

    if(throughput) {
        ((func_args*)args)->return_code =
            ClientBenchmarkThroughput(ctx, host, port, doDTLS, throughput);
        wolfSSL_CTX_free(ctx);
        exit(EXIT_SUCCESS);
    }

    #if defined(WOLFSSL_MDK_ARM)
    wolfSSL_CTX_set_verify(ctx, SSL_VERIFY_NONE, 0);
    #endif

    ssl = wolfSSL_new(ctx);
    if (ssl == NULL)
        err_sys("unable to get SSL object");

    #ifdef HAVE_SUPPORTED_CURVES /* add curves to supported curves extension */
        if (wolfSSL_UseSupportedCurve(ssl, WOLFSSL_ECC_SECP256R1)
                != SSL_SUCCESS) {
            err_sys("unable to set curve secp256r1");
        }
        if (wolfSSL_UseSupportedCurve(ssl, WOLFSSL_ECC_SECP384R1)
                != SSL_SUCCESS) {
            err_sys("unable to set curve secp384r1");
        }
        if (wolfSSL_UseSupportedCurve(ssl, WOLFSSL_ECC_SECP521R1)
                != SSL_SUCCESS) {
            err_sys("unable to set curve secp521r1");
        }
        if (wolfSSL_UseSupportedCurve(ssl, WOLFSSL_ECC_SECP224R1)
                != SSL_SUCCESS) {
            err_sys("unable to set curve secp224r1");
        }
        if (wolfSSL_UseSupportedCurve(ssl, WOLFSSL_ECC_SECP192R1)
                != SSL_SUCCESS) {
            err_sys("unable to set curve secp192r1");
        }
        if (wolfSSL_UseSupportedCurve(ssl, WOLFSSL_ECC_SECP160R1)
                != SSL_SUCCESS) {
            err_sys("unable to set curve secp160r1");
        }
    #endif

    #ifdef HAVE_SESSION_TICKET
    wolfSSL_set_SessionTicket_cb(ssl, sessionTicketCB, (void*)"initial session");
    #endif

#ifdef HAVE_ALPN
    if (alpnList != NULL) {
       printf("ALPN accepted protocols list : %s\n", alpnList);
       wolfSSL_UseALPN(ssl, alpnList, (word32)XSTRLEN(alpnList), alpn_opt);
    }
#endif
#ifdef HAVE_CERTIFICATE_STATUS_REQUEST
    if (statusRequest) {
        switch (statusRequest) {
            case WOLFSSL_CSR_OCSP:
                if (wolfSSL_UseOCSPStapling(ssl, WOLFSSL_CSR_OCSP,
                                     WOLFSSL_CSR_OCSP_USE_NONCE) != SSL_SUCCESS)
                    err_sys("UseCertificateStatusRequest failed");

            break;
        }

        wolfSSL_CTX_EnableOCSP(ctx, 0);
    }
#endif
#ifdef HAVE_CERTIFICATE_STATUS_REQUEST_V2
    if (statusRequest) {
        switch (statusRequest) {
            case WOLFSSL_CSR2_OCSP:
                if (wolfSSL_UseOCSPStaplingV2(ssl,
                    WOLFSSL_CSR2_OCSP, WOLFSSL_CSR2_OCSP_USE_NONCE)
                                                                 != SSL_SUCCESS)
                    err_sys("UseCertificateStatusRequest failed");
            break;
            case WOLFSSL_CSR2_OCSP_MULTI:
                if (wolfSSL_UseOCSPStaplingV2(ssl,
                    WOLFSSL_CSR2_OCSP_MULTI, 0)
                                                                 != SSL_SUCCESS)
                    err_sys("UseCertificateStatusRequest failed");
            break;

        }

        wolfSSL_CTX_EnableOCSP(ctx, 0);
    }
#endif

    tcp_connect(&sockfd, host, port, doDTLS, ssl);
    wolfSSL_set_fd(ssl, sockfd);
#ifdef HAVE_CRL
    if (disableCRL == 0) {
        if (wolfSSL_EnableCRL(ssl, WOLFSSL_CRL_CHECKALL) != SSL_SUCCESS)
            err_sys("can't enable crl check");
        if (wolfSSL_LoadCRL(ssl, crlPemDir, SSL_FILETYPE_PEM, 0) != SSL_SUCCESS)
            err_sys("can't load crl, check crlfile and date validity");
        if (wolfSSL_SetCRL_Cb(ssl, CRL_CallBack) != SSL_SUCCESS)
            err_sys("can't set crl callback");
    }
#endif
#ifdef HAVE_SECURE_RENEGOTIATION
    if (scr) {
        if (wolfSSL_UseSecureRenegotiation(ssl) != SSL_SUCCESS)
            err_sys("can't enable secure renegotiation");
    }
#endif
#ifdef ATOMIC_USER
    if (atomicUser)
        SetupAtomicUser(ctx, ssl);
#endif
#ifdef HAVE_PK_CALLBACKS
    if (pkCallbacks)
        SetupPkCallbacks(ctx, ssl);
#endif
    if (matchName && doPeerCheck)
        wolfSSL_check_domain_name(ssl, domain);
#ifndef WOLFSSL_CALLBACKS
    if (nonBlocking) {
        wolfSSL_set_using_nonblock(ssl, 1);
        tcp_set_nonblocking(&sockfd);
        NonBlockingSSL_Connect(ssl);
    }
    else if (wolfSSL_connect(ssl) != SSL_SUCCESS) {
        /* see note at top of README */
        int  err = wolfSSL_get_error(ssl, 0);
        char buffer[WOLFSSL_MAX_ERROR_SZ];
        printf("err = %d, %s\n", err,
                                wolfSSL_ERR_error_string(err, buffer));
        err_sys("SSL_connect failed");
        /* if you're getting an error here  */
    }
#else
    timeout.tv_sec  = 2;
    timeout.tv_usec = 0;
    NonBlockingSSL_Connect(ssl);  /* will keep retrying on timeout */
#endif
    showPeer(ssl);

#ifdef HAVE_ALPN
    if (alpnList != NULL) {
        int err;
        char *protocol_name = NULL;
        word16 protocol_nameSz = 0;

        err = wolfSSL_ALPN_GetProtocol(ssl, &protocol_name, &protocol_nameSz);
        if (err == SSL_SUCCESS)
            printf("Received ALPN protocol : %s (%d)\n",
                   protocol_name, protocol_nameSz);
        else if (err == SSL_ALPN_NOT_FOUND)
            printf("No ALPN response received (no match with server)\n");
        else
            printf("Getting ALPN protocol name failed\n");
    }
#endif

#ifdef HAVE_SECURE_RENEGOTIATION
    if (scr && forceScr) {
        if (nonBlocking) {
            printf("not doing secure renegotiation on example with"
                   " nonblocking yet");
        } else {
            if (wolfSSL_Rehandshake(ssl) != SSL_SUCCESS) {
                int  err = wolfSSL_get_error(ssl, 0);
                char buffer[WOLFSSL_MAX_ERROR_SZ];
                printf("err = %d, %s\n", err,
                                wolfSSL_ERR_error_string(err, buffer));
                err_sys("wolfSSL_Rehandshake failed");
            }
        }
    }
#endif /* HAVE_SECURE_RENEGOTIATION */

    if (sendGET) {
        printf("SSL connect ok, sending GET...\n");
        msgSz = 28;
        strncpy(msg, "GET /index.html HTTP/1.0\r\n\r\n", msgSz);
        msg[msgSz] = '\0';

        resumeSz = msgSz;
        strncpy(resumeMsg, "GET /index.html HTTP/1.0\r\n\r\n", resumeSz);
        resumeMsg[resumeSz] = '\0';
    }
    if (wolfSSL_write(ssl, msg, msgSz) != msgSz)
        err_sys("SSL_write failed");

    input = wolfSSL_read(ssl, reply, sizeof(reply)-1);
    if (input > 0) {
        reply[input] = 0;
        printf("Server response: %s\n", reply);

        if (sendGET) {  /* get html */
            while (1) {
                input = wolfSSL_read(ssl, reply, sizeof(reply)-1);
                if (input > 0) {
                    reply[input] = 0;
                    printf("%s\n", reply);
                }
                else
                    break;
            }
        }
    }
    else if (input < 0) {
        int readErr = wolfSSL_get_error(ssl, 0);
        if (readErr != SSL_ERROR_WANT_READ)
            err_sys("wolfSSL_read failed");
    }

#ifndef NO_SESSION_CACHE
    if (resumeSession) {
        session   = wolfSSL_get_session(ssl);
        sslResume = wolfSSL_new(ctx);
        if (sslResume == NULL)
            err_sys("unable to get SSL object");
    }
#endif

    if (doDTLS == 0) {           /* don't send alert after "break" command */
        ret = wolfSSL_shutdown(ssl);
        if (wc_shutdown && ret == SSL_SHUTDOWN_NOT_DONE)
            wolfSSL_shutdown(ssl);    /* bidirectional shutdown */
    }
#ifdef ATOMIC_USER
    if (atomicUser)
        FreeAtomicUser(ssl);
#endif
    wolfSSL_free(ssl);
    CloseSocket(sockfd);

#ifndef NO_SESSION_CACHE
    if (resumeSession) {
        if (doDTLS) {
#ifdef USE_WINDOWS_API
            Sleep(500);
#elif defined(WOLFSSL_TIRTOS)
            Task_sleep(1);
#else
            sleep(1);
#endif
        }
        tcp_connect(&sockfd, host, port, doDTLS, sslResume);
        wolfSSL_set_fd(sslResume, sockfd);
#ifdef HAVE_ALPN
        if (alpnList != NULL) {
            printf("ALPN accepted protocols list : %s\n", alpnList);
            wolfSSL_UseALPN(sslResume, alpnList, (word32)XSTRLEN(alpnList),
                            alpn_opt);
        }
#endif
#ifdef HAVE_SECURE_RENEGOTIATION
        if (scr) {
            if (wolfSSL_UseSecureRenegotiation(sslResume) != SSL_SUCCESS)
                err_sys("can't enable secure renegotiation");
        }
#endif
        wolfSSL_set_session(sslResume, session);
#ifdef HAVE_SESSION_TICKET
        wolfSSL_set_SessionTicket_cb(sslResume, sessionTicketCB,
                                    (void*)"resumed session");
#endif

#ifndef WOLFSSL_CALLBACKS
        if (nonBlocking) {
            wolfSSL_set_using_nonblock(sslResume, 1);
            tcp_set_nonblocking(&sockfd);
            NonBlockingSSL_Connect(sslResume);
        }
        else if (wolfSSL_connect(sslResume) != SSL_SUCCESS)
            err_sys("SSL resume failed");
#else
        timeout.tv_sec  = 2;
        timeout.tv_usec = 0;
        NonBlockingSSL_Connect(ssl);  /* will keep retrying on timeout */
#endif
        showPeer(sslResume);

        if (wolfSSL_session_reused(sslResume))
            printf("reused session id\n");
        else
            printf("didn't reuse session id!!!\n");

#ifdef HAVE_ALPN
        if (alpnList != NULL) {
            int err;
            char *protocol_name = NULL;
            word16 protocol_nameSz = 0;

            printf("Sending ALPN accepted list : %s\n", alpnList);
            err = wolfSSL_ALPN_GetProtocol(sslResume, &protocol_name,
                                           &protocol_nameSz);
            if (err == SSL_SUCCESS)
                printf("Received ALPN protocol : %s (%d)\n",
                       protocol_name, protocol_nameSz);
            else if (err == SSL_ALPN_NOT_FOUND)
                printf("Not received ALPN response (no match with server)\n");
            else
                printf("Getting ALPN protocol name failed\n");
        }
#endif
        if (wolfSSL_write(sslResume, resumeMsg, resumeSz) != resumeSz)
            err_sys("SSL_write failed");

        if (nonBlocking) {
            /* give server a chance to bounce a message back to client */
            #ifdef USE_WINDOWS_API
                Sleep(500);
            #elif defined(WOLFSSL_TIRTOS)
                Task_sleep(1);
            #else
                sleep(1);
            #endif
        }

    input = wolfSSL_read(sslResume, reply, sizeof(reply)-1);

    if (input > 0) {
        reply[input] = 0;
        printf("Server resume response: %s\n", reply);

        if (sendGET) {  /* get html */
            while (1) {
                input = wolfSSL_read(sslResume, reply, sizeof(reply)-1);
                if (input > 0) {
                    reply[input] = 0;
                    printf("%s\n", reply);
                }
                else
                    break;
            }
        }
    } else if (input < 0) {
        int readErr = wolfSSL_get_error(ssl, 0);
        if (readErr != SSL_ERROR_WANT_READ)
            err_sys("wolfSSL_read failed");
    }

        /* try to send session break */
        wolfSSL_write(sslResume, msg, msgSz);

        ret = wolfSSL_shutdown(sslResume);
        if (wc_shutdown && ret == SSL_SHUTDOWN_NOT_DONE)
            wolfSSL_shutdown(sslResume);    /* bidirectional shutdown */

        wolfSSL_free(sslResume);
        CloseSocket(sockfd);
    }
#endif /* NO_SESSION_CACHE */

    wolfSSL_CTX_free(ctx);

    ((func_args*)args)->return_code = 0;

#ifdef USE_WOLFSSL_MEMORY
    if (trackMemory)
        ShowMemoryTracker();
#endif /* USE_WOLFSSL_MEMORY */

#if !defined(WOLFSSL_TIRTOS)
    return 0;
#endif
}
示例#16
0
THREAD_RETURN WOLFSSL_THREAD client_test(void* args)
{
    SOCKET_T sockfd = 0;

    WOLFSSL_METHOD*  method  = 0;
    WOLFSSL_CTX*     ctx     = 0;
    WOLFSSL*         ssl     = 0;
    
    WOLFSSL*         sslResume = 0;
    WOLFSSL_SESSION* session = 0;
    char         resumeMsg[] = "resuming wolfssl!";
    int          resumeSz    = sizeof(resumeMsg);

    char msg[32] = "hello wolfssl!";   /* GET may make bigger */
    char reply[80];
    int  input;
    int  msgSz = (int)strlen(msg);

    word16 port   = wolfSSLPort;
    char* host   = (char*)wolfSSLIP;
    const char* domain = "www.wolfssl.com";

    int    ch;
    int    version = CLIENT_INVALID_VERSION;
    int    usePsk   = 0;
    int    useAnon  = 0;
    int    sendGET  = 0;
    int    benchmark = 0;
    int    doDTLS    = 0;
    int    matchName = 0;
    int    doPeerCheck = 1;
    int    nonBlocking = 0;
    int    resumeSession = 0;
    int    wc_shutdown   = 0;
    int    disableCRL    = 0;
    int    externalTest  = 0;
    int    ret;
    int    scr           = 0;    /* allow secure renegotiation */
    int    forceScr      = 0;    /* force client initiaed scr */
    int    trackMemory   = 0;
    int    useClientCert = 1;
    int    fewerPackets  = 0;
    int    atomicUser    = 0;
    int    pkCallbacks   = 0;
    int    overrideDateErrors = 0;
    int    minDhKeyBits  = DEFAULT_MIN_DHKEY_BITS;
    char*  cipherList = NULL;
    const char* verifyCert = caCert;
    const char* ourCert    = cliCert;
    const char* ourKey     = cliKey;

#ifdef HAVE_SNI
    char*  sniHostName = NULL;
#endif
#ifdef HAVE_MAX_FRAGMENT
    byte maxFragment = 0;
#endif
#ifdef HAVE_TRUNCATED_HMAC
    byte  truncatedHMAC = 0;
#endif


#ifdef HAVE_OCSP
    int    useOcsp  = 0;
    char*  ocspUrl  = NULL;
#endif

    int     argc = ((func_args*)args)->argc;
    char**  argv = ((func_args*)args)->argv;

    ((func_args*)args)->return_code = -1; /* error state */

#ifdef NO_RSA
    verifyCert = (char*)eccCert;
    ourCert    = (char*)cliEccCert;
    ourKey     = (char*)cliEccKey;
#endif
    (void)resumeSz;
    (void)session;
    (void)sslResume;
    (void)trackMemory;
    (void)atomicUser;
    (void)pkCallbacks;
    (void)scr;
    (void)forceScr;
    (void)ourKey;
    (void)ourCert;
    (void)verifyCert;
    (void)useClientCert;
    (void)overrideDateErrors;
    (void)disableCRL;
    (void)minDhKeyBits;

    StackTrap();

    while ((ch = mygetopt(argc, argv,
                          "?gdDusmNrwRitfxXUPCh:p:v:l:A:c:k:Z:b:zS:L:ToO:a"))
                                                                        != -1) {
        switch (ch) {
            case '?' :
                Usage();
                exit(EXIT_SUCCESS);

            case 'g' :
                sendGET = 1;
                break;

            case 'd' :
                doPeerCheck = 0;
                break;

            case 'D' :
                overrideDateErrors = 1;
                break;

            case 'C' :
                #ifdef HAVE_CRL
                    disableCRL = 1;
                #endif
                break;

            case 'u' :
                doDTLS  = 1;
                break;

            case 's' :
                usePsk = 1;
                break;

            case 't' :
            #ifdef USE_WOLFSSL_MEMORY
                trackMemory = 1;
            #endif
                break;

            case 'm' :
                matchName = 1;
                break;

            case 'x' :
                useClientCert = 0;
                break;

            case 'X' :
                externalTest = 1;
                break;

            case 'f' :
                fewerPackets = 1;
                break;

            case 'U' :
            #ifdef ATOMIC_USER
                atomicUser = 1;
            #endif
                break;

            case 'P' :
            #ifdef HAVE_PK_CALLBACKS 
                pkCallbacks = 1;
            #endif
                break;

            case 'h' :
                host   = myoptarg;
                domain = myoptarg;
                break;

            case 'p' :
                port = (word16)atoi(myoptarg);
                #if !defined(NO_MAIN_DRIVER) || defined(USE_WINDOWS_API)
                    if (port == 0)
                        err_sys("port number cannot be 0");
                #endif
                break;

            case 'v' :
                version = atoi(myoptarg);
                if (version < 0 || version > 3) {
                    Usage();
                    exit(MY_EX_USAGE);
                }
                break;

            case 'l' :
                cipherList = myoptarg;
                break;

            case 'A' :
                verifyCert = myoptarg;
                break;

            case 'c' :
                ourCert = myoptarg;
                break;

            case 'k' :
                ourKey = myoptarg;
                break;

            case 'Z' :
                #ifndef NO_DH
                    minDhKeyBits = atoi(myoptarg);
                    if (minDhKeyBits <= 0 || minDhKeyBits > 16000) {
                        Usage();
                        exit(MY_EX_USAGE);
                    }
                #endif
                break;

            case 'b' :
                benchmark = atoi(myoptarg);
                if (benchmark < 0 || benchmark > 1000000) {
                    Usage();
                    exit(MY_EX_USAGE);
                }
                break;

            case 'N' :
                nonBlocking = 1;
                break;

            case 'r' :
                resumeSession = 1;
                break;

            case 'w' :
                wc_shutdown = 1;
                break;

            case 'R' :
                #ifdef HAVE_SECURE_RENEGOTIATION
                    scr = 1;
                #endif
                break;

            case 'i' :
                #ifdef HAVE_SECURE_RENEGOTIATION
                    scr      = 1;
                    forceScr = 1;
                #endif
                break;

            case 'z' :
                #ifndef WOLFSSL_LEANPSK
                    wolfSSL_GetObjectSize();
                #endif
                break;

            case 'S' :
                #ifdef HAVE_SNI
                    sniHostName = myoptarg;
                #endif
                break;

            case 'L' :
                #ifdef HAVE_MAX_FRAGMENT
                    maxFragment = atoi(myoptarg);
                    if (maxFragment < WOLFSSL_MFL_2_9 ||
                                                maxFragment > WOLFSSL_MFL_2_13) {
                        Usage();
                        exit(MY_EX_USAGE);
                    }
                #endif
                break;

            case 'T' :
                #ifdef HAVE_TRUNCATED_HMAC
                    truncatedHMAC = 1;
                #endif
                break;

            case 'o' :
                #ifdef HAVE_OCSP
                    useOcsp = 1;
                #endif
                break;

            case 'O' :
                #ifdef HAVE_OCSP
                    useOcsp = 1;
                    ocspUrl = myoptarg;
                #endif
                break;

            case 'a' :
                #ifdef HAVE_ANON
                    useAnon = 1;
                #endif
                break;

            default:
                Usage();
                exit(MY_EX_USAGE);
        }
    }

    myoptind = 0;      /* reset for test cases */

    if (externalTest) {
        /* detect build cases that wouldn't allow test against wolfssl.com */
        int done = 0;
        (void)done;

        #ifdef NO_RSA
            done = 1;
        #endif

        #ifndef NO_PSK
            done = 1;
        #endif

        #ifdef NO_SHA
            done = 1;  /* external cert chain most likely has SHA */
        #endif

        if (done) {
            printf("external test can't be run in this mode");

            ((func_args*)args)->return_code = 0;
            exit(EXIT_SUCCESS);
        }
    }

    /* sort out DTLS versus TLS versions */
    if (version == CLIENT_INVALID_VERSION) {
        if (doDTLS)
            version = CLIENT_DTLS_DEFAULT_VERSION;
        else
            version = CLIENT_DEFAULT_VERSION;
    }
    else {
        if (doDTLS) {
            if (version == 3)
                version = -2;
            else
                version = -1;
        }
    }

#ifdef USE_WOLFSSL_MEMORY
    if (trackMemory)
        InitMemoryTracker();
#endif

    switch (version) {
#ifndef NO_OLD_TLS
    #ifdef WOLFSSL_ALLOW_SSLV3
        case 0:
            method = wolfSSLv3_client_method();
            break;
    #endif

    #ifndef NO_TLS
        case 1:
            method = wolfTLSv1_client_method();
            break;

        case 2:
            method = wolfTLSv1_1_client_method();
            break;
    #endif /* NO_TLS */

#endif  /* NO_OLD_TLS */

#ifndef NO_TLS
        case 3:
            method = wolfTLSv1_2_client_method();
            break;
#endif

#ifdef WOLFSSL_DTLS
        #ifndef NO_OLD_TLS
        case -1:
            method = wolfDTLSv1_client_method();
            break;
        #endif

        case -2:
            method = wolfDTLSv1_2_client_method();
            break;
#endif

        default:
            err_sys("Bad SSL version");
            break;
    }

    if (method == NULL)
        err_sys("unable to get method");

    ctx = wolfSSL_CTX_new(method);
    if (ctx == NULL)
        err_sys("unable to get ctx");

    if (cipherList)
        if (wolfSSL_CTX_set_cipher_list(ctx, cipherList) != SSL_SUCCESS)
            err_sys("client can't set cipher list 1");

#ifdef WOLFSSL_LEANPSK
    usePsk = 1;
#endif

#if defined(NO_RSA) && !defined(HAVE_ECC)
    usePsk = 1;
#endif

    if (fewerPackets)
        wolfSSL_CTX_set_group_messages(ctx);

#ifndef NO_DH
    wolfSSL_CTX_SetMinDhKey_Sz(ctx, (word16)minDhKeyBits);
#endif

    if (usePsk) {
#ifndef NO_PSK
        wolfSSL_CTX_set_psk_client_callback(ctx, my_psk_client_cb);
        if (cipherList == NULL) {
            const char *defaultCipherList;
            #if defined(HAVE_AESGCM) && !defined(NO_DH)
                defaultCipherList = "DHE-PSK-AES128-GCM-SHA256";
            #elif defined(HAVE_NULL_CIPHER)
                defaultCipherList = "PSK-NULL-SHA256";
            #else
                defaultCipherList = "PSK-AES128-CBC-SHA256";
            #endif
            if (wolfSSL_CTX_set_cipher_list(ctx,defaultCipherList)
                                                                  !=SSL_SUCCESS)
                err_sys("client can't set cipher list 2");
        }
#endif
        useClientCert = 0;
    }

    if (useAnon) {
#ifdef HAVE_ANON
        if (cipherList == NULL) {
            wolfSSL_CTX_allow_anon_cipher(ctx);
            if (wolfSSL_CTX_set_cipher_list(ctx,"ADH-AES128-SHA") != SSL_SUCCESS)
                err_sys("client can't set cipher list 4");
        }
#endif
        useClientCert = 0;
    }

#if defined(OPENSSL_EXTRA) || defined(HAVE_WEBSERVER)
    wolfSSL_CTX_set_default_passwd_cb(ctx, PasswordCallBack);
#endif

#if defined(WOLFSSL_SNIFFER)
    if (cipherList == NULL) {
        /* don't use EDH, can't sniff tmp keys */
        if (wolfSSL_CTX_set_cipher_list(ctx, "AES256-SHA256") != SSL_SUCCESS) {
            err_sys("client can't set cipher list 3");
        }
    }
#endif

#ifdef HAVE_OCSP
    if (useOcsp) {
        if (ocspUrl != NULL) {
            wolfSSL_CTX_SetOCSP_OverrideURL(ctx, ocspUrl);
            wolfSSL_CTX_EnableOCSP(ctx, WOLFSSL_OCSP_NO_NONCE
                                                    | WOLFSSL_OCSP_URL_OVERRIDE);
        }
        else
            wolfSSL_CTX_EnableOCSP(ctx, WOLFSSL_OCSP_NO_NONCE);
    }
#endif

#ifdef USER_CA_CB
    wolfSSL_CTX_SetCACb(ctx, CaCb);
#endif

#ifdef VERIFY_CALLBACK
    wolfSSL_CTX_set_verify(ctx, SSL_VERIFY_PEER, myVerify);
#endif
#if !defined(NO_FILESYSTEM) && !defined(NO_CERTS)
    if (useClientCert){
        if (wolfSSL_CTX_use_certificate_chain_file(ctx, ourCert) != SSL_SUCCESS)
            err_sys("can't load client cert file, check file and run from"
                    " wolfSSL home dir");

        if (wolfSSL_CTX_use_PrivateKey_file(ctx, ourKey, SSL_FILETYPE_PEM)
                                         != SSL_SUCCESS)
            err_sys("can't load client private key file, check file and run "
                    "from wolfSSL home dir");
    }

    if (!usePsk && !useAnon) {
        if (wolfSSL_CTX_load_verify_locations(ctx, verifyCert,0) != SSL_SUCCESS)
            err_sys("can't load ca file, Please run from wolfSSL home dir");
#ifdef HAVE_ECC
        /* load ecc verify too, echoserver uses it by default w/ ecc */
        if (wolfSSL_CTX_load_verify_locations(ctx, eccCert, 0) != SSL_SUCCESS)
            err_sys("can't load ecc ca file, Please run from wolfSSL home dir");
#endif /* HAVE_ECC */
    }
#endif /* !NO_FILESYSTEM && !NO_CERTS */
#if !defined(NO_CERTS)
    if (!usePsk && !useAnon && doPeerCheck == 0)
        wolfSSL_CTX_set_verify(ctx, SSL_VERIFY_NONE, 0);
    if (!usePsk && !useAnon && overrideDateErrors == 1)
        wolfSSL_CTX_set_verify(ctx, SSL_VERIFY_PEER, myDateCb);
#endif

#ifdef HAVE_CAVIUM
    wolfSSL_CTX_UseCavium(ctx, CAVIUM_DEV_ID);
#endif

#ifdef HAVE_SNI
    if (sniHostName)
        if (wolfSSL_CTX_UseSNI(ctx, 0, sniHostName, XSTRLEN(sniHostName))
                                                                 != SSL_SUCCESS)
            err_sys("UseSNI failed");
#endif
#ifdef HAVE_MAX_FRAGMENT
    if (maxFragment)
        if (wolfSSL_CTX_UseMaxFragment(ctx, maxFragment) != SSL_SUCCESS)
            err_sys("UseMaxFragment failed");
#endif
#ifdef HAVE_TRUNCATED_HMAC
    if (truncatedHMAC)
        if (wolfSSL_CTX_UseTruncatedHMAC(ctx) != SSL_SUCCESS)
            err_sys("UseTruncatedHMAC failed");
#endif
#ifdef HAVE_SESSION_TICKET
    if (wolfSSL_CTX_UseSessionTicket(ctx) != SSL_SUCCESS)
        err_sys("UseSessionTicket failed");
#endif

    if (benchmark) {
        /* time passed in number of connects give average */
        int times = benchmark;
        int loops = resumeSession ? 2 : 1;
        int i = 0;
        WOLFSSL_SESSION* benchSession = NULL;

        while (loops--) {
            int benchResume = resumeSession && loops == 0;
            double start = current_time(), avg;

            for (i = 0; i < times; i++) {
                tcp_connect(&sockfd, host, port, doDTLS);

                ssl = wolfSSL_new(ctx);
                if (benchResume)
                    wolfSSL_set_session(ssl, benchSession);
                wolfSSL_set_fd(ssl, sockfd);
                if (wolfSSL_connect(ssl) != SSL_SUCCESS)
                    err_sys("SSL_connect failed");

                wolfSSL_shutdown(ssl);
                if (i == (times-1) && resumeSession) {
                    benchSession = wolfSSL_get_session(ssl);
                }
                wolfSSL_free(ssl);
                CloseSocket(sockfd);
            }
            avg = current_time() - start;
            avg /= times;
            avg *= 1000;   /* milliseconds */
            if (benchResume)
                printf("wolfSSL_resume  avg took: %8.3f milliseconds\n", avg);
            else
                printf("wolfSSL_connect avg took: %8.3f milliseconds\n", avg);
        }

        wolfSSL_CTX_free(ctx);
        ((func_args*)args)->return_code = 0;

        exit(EXIT_SUCCESS);
    }
    
    #if defined(WOLFSSL_MDK_ARM)
    wolfSSL_CTX_set_verify(ctx, SSL_VERIFY_NONE, 0);
    #endif
    
    ssl = wolfSSL_new(ctx);
    if (ssl == NULL)
        err_sys("unable to get SSL object");
    #ifdef HAVE_SESSION_TICKET
    wolfSSL_set_SessionTicket_cb(ssl, sessionTicketCB, (void*)"initial session");
    #endif
    if (doDTLS) {
        SOCKADDR_IN_T addr;
        build_addr(&addr, host, port, 1);
        wolfSSL_dtls_set_peer(ssl, &addr, sizeof(addr));
        tcp_socket(&sockfd, 1);
    }
    else {
        tcp_connect(&sockfd, host, port, 0);
    }

#ifdef HAVE_POLY1305
    /* use old poly to connect with google server */
    if (!XSTRNCMP(domain, "www.google.com", 14)) {
        if (wolfSSL_use_old_poly(ssl, 1) != 0)
            err_sys("unable to set to old poly");
    }
#endif

    wolfSSL_set_fd(ssl, sockfd);
#ifdef HAVE_CRL
    if (disableCRL == 0) {
        if (wolfSSL_EnableCRL(ssl, WOLFSSL_CRL_CHECKALL) != SSL_SUCCESS)
            err_sys("can't enable crl check");
        if (wolfSSL_LoadCRL(ssl, crlPemDir, SSL_FILETYPE_PEM, 0) != SSL_SUCCESS)
            err_sys("can't load crl, check crlfile and date validity");
        if (wolfSSL_SetCRL_Cb(ssl, CRL_CallBack) != SSL_SUCCESS)
            err_sys("can't set crl callback");
    }
#endif
#ifdef HAVE_SECURE_RENEGOTIATION
    if (scr) {
        if (wolfSSL_UseSecureRenegotiation(ssl) != SSL_SUCCESS)
            err_sys("can't enable secure renegotiation");
    }
#endif
#ifdef ATOMIC_USER
    if (atomicUser)
        SetupAtomicUser(ctx, ssl);
#endif
#ifdef HAVE_PK_CALLBACKS
    if (pkCallbacks)
        SetupPkCallbacks(ctx, ssl);
#endif
    if (matchName && doPeerCheck)
        wolfSSL_check_domain_name(ssl, domain);
#ifndef WOLFSSL_CALLBACKS
    if (nonBlocking) {
        wolfSSL_set_using_nonblock(ssl, 1);
        tcp_set_nonblocking(&sockfd);
        NonBlockingSSL_Connect(ssl);
    }
    else if (wolfSSL_connect(ssl) != SSL_SUCCESS) {
        /* see note at top of README */
        int  err = wolfSSL_get_error(ssl, 0);
        char buffer[WOLFSSL_MAX_ERROR_SZ];
        printf("err = %d, %s\n", err,
                                wolfSSL_ERR_error_string(err, buffer));
        err_sys("SSL_connect failed");
        /* if you're getting an error here  */
    }
#else
    timeout.tv_sec  = 2;
    timeout.tv_usec = 0;
    NonBlockingSSL_Connect(ssl);  /* will keep retrying on timeout */
#endif
    showPeer(ssl);

#ifdef HAVE_SECURE_RENEGOTIATION
    if (scr && forceScr) {
        if (nonBlocking) {
            printf("not doing secure renegotiation on example with"
                   " nonblocking yet");
        } else {
            if (wolfSSL_Rehandshake(ssl) != SSL_SUCCESS) {
                int  err = wolfSSL_get_error(ssl, 0);
                char buffer[WOLFSSL_MAX_ERROR_SZ];
                printf("err = %d, %s\n", err,
                                wolfSSL_ERR_error_string(err, buffer));
                err_sys("wolfSSL_Rehandshake failed");
            }
        }
    }
#endif /* HAVE_SECURE_RENEGOTIATION */

    if (sendGET) {
        printf("SSL connect ok, sending GET...\n");
        msgSz = 28;
        strncpy(msg, "GET /index.html HTTP/1.0\r\n\r\n", msgSz);
        msg[msgSz] = '\0';
    }
    if (wolfSSL_write(ssl, msg, msgSz) != msgSz)
        err_sys("SSL_write failed");

    input = wolfSSL_read(ssl, reply, sizeof(reply)-1);
    if (input > 0) {
        reply[input] = 0;
        printf("Server response: %s\n", reply);

        if (sendGET) {  /* get html */
            while (1) {
                input = wolfSSL_read(ssl, reply, sizeof(reply)-1);
                if (input > 0) {
                    reply[input] = 0;
                    printf("%s\n", reply);
                }
                else
                    break;
            }
        }
    }
    else if (input < 0) {
        int readErr = wolfSSL_get_error(ssl, 0);
        if (readErr != SSL_ERROR_WANT_READ)
            err_sys("wolfSSL_read failed");
    }

#ifndef NO_SESSION_CACHE
    if (resumeSession) {
        session   = wolfSSL_get_session(ssl);
        sslResume = wolfSSL_new(ctx);
    }
#endif

    if (doDTLS == 0) {           /* don't send alert after "break" command */
        ret = wolfSSL_shutdown(ssl);
        if (wc_shutdown && ret == SSL_SHUTDOWN_NOT_DONE)
            wolfSSL_shutdown(ssl);    /* bidirectional shutdown */
    }
#ifdef ATOMIC_USER
    if (atomicUser)
        FreeAtomicUser(ssl);
#endif
    wolfSSL_free(ssl);
    CloseSocket(sockfd);

#ifndef NO_SESSION_CACHE
    if (resumeSession) {
        if (doDTLS) {
            SOCKADDR_IN_T addr;
            #ifdef USE_WINDOWS_API 
                Sleep(500);
            #elif defined(WOLFSSL_TIRTOS)
                Task_sleep(1);
            #else
                sleep(1);
            #endif
            build_addr(&addr, host, port, 1);
            wolfSSL_dtls_set_peer(sslResume, &addr, sizeof(addr));
            tcp_socket(&sockfd, 1);
        }
        else {
            tcp_connect(&sockfd, host, port, 0);
        }
        wolfSSL_set_fd(sslResume, sockfd);
#ifdef HAVE_SECURE_RENEGOTIATION
        if (scr) {
            if (wolfSSL_UseSecureRenegotiation(sslResume) != SSL_SUCCESS)
                err_sys("can't enable secure renegotiation");
        }
#endif
        wolfSSL_set_session(sslResume, session);
#ifdef HAVE_SESSION_TICKET
        wolfSSL_set_SessionTicket_cb(sslResume, sessionTicketCB,
                                    (void*)"resumed session");
#endif
       
        showPeer(sslResume);
#ifndef WOLFSSL_CALLBACKS
        if (nonBlocking) {
            wolfSSL_set_using_nonblock(sslResume, 1);
            tcp_set_nonblocking(&sockfd);
            NonBlockingSSL_Connect(sslResume);
        }
        else if (wolfSSL_connect(sslResume) != SSL_SUCCESS)
            err_sys("SSL resume failed");
#else
        timeout.tv_sec  = 2;
        timeout.tv_usec = 0;
        NonBlockingSSL_Connect(ssl);  /* will keep retrying on timeout */
#endif

        if (wolfSSL_session_reused(sslResume))
            printf("reused session id\n");
        else
            printf("didn't reuse session id!!!\n");

        if (wolfSSL_write(sslResume, resumeMsg, resumeSz) != resumeSz)
            err_sys("SSL_write failed");

        if (nonBlocking) {
            /* give server a chance to bounce a message back to client */
            #ifdef USE_WINDOWS_API
                Sleep(500);
            #elif defined(WOLFSSL_TIRTOS)
                Task_sleep(1);
            #else
                sleep(1);
            #endif
        }

        input = wolfSSL_read(sslResume, reply, sizeof(reply)-1);
        if (input > 0) {
            reply[input] = 0;
            printf("Server resume response: %s\n", reply);
        }

        /* try to send session break */
        wolfSSL_write(sslResume, msg, msgSz); 

        ret = wolfSSL_shutdown(sslResume);
        if (wc_shutdown && ret == SSL_SHUTDOWN_NOT_DONE)
            wolfSSL_shutdown(sslResume);    /* bidirectional shutdown */

        wolfSSL_free(sslResume);
        CloseSocket(sockfd);
    }
#endif /* NO_SESSION_CACHE */

    wolfSSL_CTX_free(ctx);

    ((func_args*)args)->return_code = 0;

#ifdef USE_WOLFSSL_MEMORY
    if (trackMemory)
        ShowMemoryTracker();
#endif /* USE_WOLFSSL_MEMORY */

#if !defined(WOLFSSL_TIRTOS)
    return 0;
#endif
}