void TsPlotCurve::DarkenColour(int darkeningFactor)
{
if (darkeningFactor < 1)
darkeningFactor = 1;
wxColour startColor = baseColor;
unsigned char r,g,b;
r = startColor.Red() / darkeningFactor;
g = startColor.Green() / darkeningFactor;
b = startColor.Blue() / darkeningFactor;
wxColour theColor(r, g, b);
SetColour(theColor, -1);
baseColor = startColor;
}
void trend::Tolder::grdDraw()
{
glBegin(GL_POINTS);
TNDR_GLDATAT* cpoint_array = new TNDR_GLDATAT [2*_num_grid_points];
unsigned start = 0;
unsigned stop = 0;
for (VGrids::const_iterator VG = _grid_props.begin(); VG != _grid_props.end(); VG++)
{
layprop::tellRGB theColor(_drawprop->getColor((*VG)->color()));
glColor4ub(theColor.red(), theColor.green(), theColor.blue(), theColor.alpha());
stop = (*VG)->dump(cpoint_array, 2*start);
for (unsigned i = start; i < stop; i++)
glVertex2f(cpoint_array[2*i], cpoint_array[2*i+1]);
start = stop;
}
assert(start <= (_num_grid_points));
delete [] cpoint_array;
glEnd();
}
void TsPlotCurve::LightenColour(int lighteningFactor)
{
if (lighteningFactor < 1)
lighteningFactor = 1;
wxColour startColor = baseColor;
unsigned char r,g,b, rdiff, gdiff, bdiff;
rdiff = 255 - startColor.Red();
gdiff = 255 - startColor.Green();
bdiff = 255 - startColor.Blue();
r = startColor.Red() + (int)(rdiff * (1.0 - 1.0 / lighteningFactor));
g = startColor.Green() + (int)(gdiff * (1.0 - 1.0 / lighteningFactor));
b = startColor.Blue() + (int)(bdiff * (1.0 - 1.0 / lighteningFactor));
wxColour theColor(r, g, b);
SetColour(theColor, -1);
baseColor = startColor;
}
void KDChartLinesPainter::specificPaintData( QPainter* painter,
const QRect& /*ourClipRect*/,
KDChartTableDataBase* data,
KDChartDataRegionList* regions,
const KDChartAxisParams* ordinatePara,
bool /*bNormalMode*/,
uint chart,
double logWidth,
double /*areaWidthP1000*/,
double logHeight,
double axisYOffset,
double minColumnValue,
double maxColumnValue,
double columnValueDistance,
uint /*chartDatasetStart*/,
uint /*chartDatasetEnd*/,
uint datasetStart,
uint datasetEnd )
{
if( !data ) return;
abscissaInfos ai;
ai.bCenterThePoints = mCenterThePoints;
calculateAbscissaInfos( *params(), *data,
datasetStart, datasetEnd,
logWidth, _dataRect,
ai );
mCenterThePoints = ai.bCenterThePoints;
bool bOrdinateDecreasing = ordinatePara
? ordinatePara->axisValuesDecreasing()
: false;
bool bOrdinateIsLogarithmic
= ordinatePara
? (KDChartAxisParams::AxisCalcLogarithmic == ordinatePara->axisCalcMode())
: false;
//const double ordinatePixelsPerUnit = logHeight / columnValueDistance;
const double ordinatePixelsPerUnit
= ( ordinatePara
&& (0.0 != ordinatePara->trueAxisDeltaPixels())
&& (0.0 != ordinatePara->trueAxisDelta()))
? ordinatePara->trueAxisDeltaPixels() / ordinatePara->trueAxisDelta()
: logHeight / columnValueDistance;;
//qDebug("ordinatePixelsPerUnit: %f",ordinatePixelsPerUnit);
const bool showThreeDLines = !mIsArea && params()->threeDLines();
enum { Normal, Stacked, Percent } mode = Normal;
if ( ( ( mChartType == KDChartParams::Line )
&& ( params()->lineChartSubType() == KDChartParams::LineNormal ) )
|| ( ( mChartType == KDChartParams::Area )
&& ( params()->areaChartSubType() == KDChartParams::AreaNormal ) ) )
mode = Normal;
else if ( ( ( mChartType == KDChartParams::Line )
&& ( params()->lineChartSubType() == KDChartParams::LineStacked ) )
|| ( ( mChartType == KDChartParams::Area )
&& ( params()->areaChartSubType() == KDChartParams::AreaStacked ) ) )
mode = Stacked;
else if ( ( ( mChartType == KDChartParams::Line )
&& ( params()->lineChartSubType() == KDChartParams::LinePercent ) )
|| ( ( mChartType == KDChartParams::Area )
&& ( params()->areaChartSubType() == KDChartParams::AreaPercent ) ) )
mode = Percent;
else
qDebug( "Internal error in KDChartLinesPainter::paintDataInternal(): Unknown subtype" );
QMap < int, double > currentValueSums;
if ( mode == Stacked || mode == Percent ) {
// this array is only used for stacked and percent lines, no need
// to waste time initializing it for normal types
for ( int value = 0; value < ai.numValues; ++value )
currentValueSums[ value ] = 0.0;
}
QMap < int, double > totalValueSums;
// compute the position of the 0 axis
double zeroXAxisI;
if ( mode == Percent ) {
if ( minColumnValue == 0.0 )
zeroXAxisI = logHeight + axisYOffset;
else if( maxColumnValue == 0.0 )
zeroXAxisI = _dataRect.y() + axisYOffset;
else
zeroXAxisI = logHeight / 2.0 + _dataRect.y();
} else
zeroXAxisI = ordinatePara->axisZeroLineStartY() - _dataRect.y();
// compute how to shift of the points in case we want them in the
// middle of their respective columns
int xShift = mCenterThePoints ? static_cast < int > ( ai.pointDist * 0.5 ) : 0;
// calculate all points' positions
// ===============================
int arrayNumDatasets = 0;
int arrayNumValues = ai.bAbscissaHasTrueAxisDtValues
? data->cols()
: ai.numValues;
int dataset;
for( dataset = datasetEnd;
( dataset >= static_cast < int > ( datasetStart ) && dataset >= 0 );
--dataset )
++arrayNumDatasets;
#if COMPAT_QT_VERSION >= 0x030000
QValueVector<MyPoint> allPoints(
#else
QArray<MyPoint> allPoints(
#endif
arrayNumDatasets * arrayNumValues );
KDChartPropertySet curPropSet;
int curPropSetId = KDChartPropertySet::UndefinedID;
for( dataset = datasetEnd; ( dataset >= (int)datasetStart && dataset >= 0 ); --dataset ) {
int prevPointX = -1;
int prevPointY = -1;
const KDChartParams::LineMarkerStyle
defaultMarkerStyle = params()->lineMarkerStyle( dataset );
const QPen default2DPen( params()->lineColor().isValid()
? params()->lineColor()
: params()->dataColor( dataset ),
params()->lineWidth(),
params()->lineStyle( dataset ) );
if( ai.bAbscissaHasTrueAxisDtValues )
ai.numValues = data->cols();
QVariant vValY;
QVariant vValX;
int cellPropID;
for( int value = 0; value < ai.numValues; ++value ) {
//if ( mode == Percent )
// valueTotal = data->colAbsSum( value );
double valueTotal = 0.0; // Will only be used for Percent
if( mode == Percent ) {
valueTotal = 0.0;
// iterate over datasets of this axis only:
for ( uint dataset2 = datasetStart;
dataset2 <= datasetEnd;
++dataset2 ) {
if( data->cellCoord( dataset2, value, vValY, 1 ) &&
QVariant::Double == vValY.type() )
valueTotal += vValY.toDouble();
}
}
if( data->cellContent( dataset, value, vValY, vValX, cellPropID ) &&
QVariant::Double == vValY.type() &&
( !ai.bCellsHaveSeveralCoordinates || QVariant::Invalid != vValX.type() ) ){
//qDebug("a. cellPropID: %i",cellPropID);
// calculate Ordinate axis value
// -----------------------------
double cellValue = vValY.toDouble();
double drawValue = 0.0;
// PENDING(kalle) This does not work for AreaPercent yet
if ( mode == Stacked )
drawValue = ( cellValue + currentValueSums[ value ] ) * ordinatePixelsPerUnit;
else if ( mode == Percent )
drawValue = ( ( cellValue + currentValueSums[ value ] ) / valueTotal ) * 100.0 * ordinatePixelsPerUnit;
else {
// LineNormal or AreaNormal
if( bOrdinateIsLogarithmic ){
if( 0.0 < cellValue )
drawValue = log10( cellValue ) * ordinatePixelsPerUnit;
else
drawValue = -10250.0;
//qDebug("\nlogarithmic calc - cellValue: %f drawValue: %f",
// cellValue, drawValue );
}else{
drawValue = cellValue * ordinatePixelsPerUnit * (bOrdinateDecreasing ? -1.0 : 1.0);
//qDebug("\nlinear calc - cellValue: %f\n - drawValue: %f",
// cellValue, drawValue );
}
}
// calculate Abscissa axis value
// -----------------------------
double xValue;
bool skipMe = !calculateAbscissaAxisValue( vValX, ai, value,
xValue );
// calculate and store the point and region / draw the marker
// ----------------------------------------------------------
if( !skipMe ){
// prevent the point from being toooo far
// below the bottom (or above the top, resp.)
// of the cliprect
double pY = QMIN( zeroXAxisI - drawValue,
(logHeight + axisYOffset) * 3 );
pY = QMAX( pY, -(logHeight + axisYOffset) * 3 );
// specify the Point
int myPointX = static_cast < int > ( xValue ) + xShift;
int myPointY = static_cast < int > ( pY );
if( cellPropID == curPropSetId &&
myPointX == prevPointX &&
myPointY == prevPointY ){
allPoints[ static_cast < int > ( datasetEnd-dataset )
* arrayNumValues + value ].setSkipThis( true );
skipMe = true;
//qDebug("skipped");
}else{
// use typecast to make it compile on windows using qt232
allPoints[ static_cast < int > ( datasetEnd-dataset )
* arrayNumValues + value ].set( myPointX, myPointY, cellValue );
//qDebug("ok");
}
if( !skipMe ){
// --------------------------------------------------------
// determine any 'extra' properties assigned to this cell
// by traversing the property set chain (if necessary)
// --------------------------------------------------------
if( cellPropID != curPropSetId ){
//qDebug("b. ( curPropSetId: %i )",curPropSetId);
//qDebug("b. cellPropID: %i",cellPropID);
//qDebug(curPropSet.name().latin1());
if( cellPropID != KDChartPropertySet::UndefinedID &&
params()->calculateProperties( cellPropID,
curPropSet ) ){
curPropSetId = cellPropID;
//qDebug("c. curPropSetId: %i",curPropSetId);
//qDebug(curPropSet.name().latin1());
}else{
curPropSetId = KDChartPropertySet::UndefinedID;
}
}
// make sure any extra horiz. and/or vert. lines and/or markers
// are drawn *before* the data lines and/or markers are painted
if( mChartType == KDChartParams::Line ){
if( curPropSetId != KDChartPropertySet::UndefinedID ){
drawExtraLinesAndMarkers(
curPropSet,
default2DPen,
defaultMarkerStyle,
myPointX, myPointY,
painter,
ai.abscissaPara,
ordinatePara,
logWidth/1000.0,
logHeight/1000.0,
false );
}
}
prevPointX = myPointX;
prevPointY = myPointY;
}
}
// calculate running sum for stacked and percent
if ( mode == Stacked || mode == Percent ) {
if( cellValue == KDCHART_POS_INFINITE )
currentValueSums[ value ] = KDCHART_POS_INFINITE;
else if( currentValueSums[ value ] != KDCHART_POS_INFINITE )
currentValueSums[ value ] += cellValue;
}
}
}
}
QPointArray previousPoints; // no vector since only areas need it,
// and these do not support 3d yet
// Store some (dataset-independend) default values
// to be used unless other properties
// have been specified for the respective data cell:
//
const bool defaultDrawMarkers = mDrawMarkers;
for ( dataset = datasetEnd; ( dataset >= (int)datasetStart && dataset >= 0 ); --dataset ) {
// Store some (dataset-dependend) default values
// to be used unless other properties
// have been specified for the respective data cell:
//
const QPen default2DPen( params()->lineColor().isValid()
? params()->lineColor()
: params()->dataColor( dataset ),
params()->lineWidth(),
params()->lineStyle( dataset ) );
bool currentDrawMarkers = defaultDrawMarkers;
const KDChartParams::LineMarkerStyle markerStyle = params()->lineMarkerStyle( dataset );
// the +2 is for the areas (if any)
QPtrVector< QPointArray > points( 2 );
points.setAutoDelete( true );
/* Pending Michel - we need to keep track of the
* non rotated points for 3D lines
*/
QPtrVector< QPointArray > oripoints( 2 );
oripoints.setAutoDelete( true );
int i = 0;
for( i = 0; i < 2; ++i ) {
points.insert( i, new QPointArray( ai.numValues + 2 ) );
oripoints.insert( i, new QPointArray( ai.numValues + 2 ) );
}
if( ai.bAbscissaHasTrueAxisDtValues )
ai.numValues = data->cols();
int point = 0;
for ( int value = 0; value < ai.numValues; ++value ) {
// determine and store marker properties assigned to this cell
// -----------------------------------------------------------
currentDrawMarkers = defaultDrawMarkers;
int cellPropID;
if( data->cellProp( dataset, value, cellPropID ) &&
cellPropID != curPropSetId ){
if( cellPropID != KDChartPropertySet::UndefinedID &&
params()->calculateProperties( cellPropID,
curPropSet ) )
curPropSetId = cellPropID;
else
curPropSetId = KDChartPropertySet::UndefinedID;
}
if( curPropSetId != KDChartPropertySet::UndefinedID ){
// we can safely call the following functions and ignore their
// return values since they will touch the parameters' values
// if the propSet *contains* corresponding own values only.
int iDummy;
curPropSet.hasOwnShowMarker( iDummy, currentDrawMarkers );
}
int iVec = static_cast < int > ( datasetEnd-dataset ) * arrayNumValues + value;
if( allPoints[ iVec ].bValid && !allPoints[ iVec ].bSkipThis ){
const MyPoint& mp = allPoints[iVec];
//qDebug("\np.x() %i p.y() %i", p.x(), p.y() );
// For 3D lines, we need two points (that lie
// behind each other on the Z axis). For 2D lines and
// areas, we need only one point.
if( showThreeDLines ) {
points[0]->setPoint( point, project( mp.p.x(), mp.p.y(),
(datasetStart+dataset)*params()->threeDLineDepth() ) );
points[1]->setPoint( point, project( mp.p.x(), mp.p.y(),
(datasetStart+dataset + 1)*params()->threeDLineDepth() ) );
oripoints[0]->setPoint( point, mp.p.x(), mp.p.y() );
oripoints[1]->setPoint( point, mp.p.x() - (datasetStart+dataset + 1)*params()->threeDLineDepth(),
mp.p.y() - (datasetStart+dataset + 1)*params()->threeDLineDepth() );
} else
// 2D lines or areas
points[0]->setPoint( point, mp.p );
++point;
int x = mp.p.x();
int y = QMAX(QMIN(mp.p.y(),
static_cast < int > (logHeight +axisYOffset)),
0);
bool markerIsOutside = y != mp.p.y();
// draw the marker and store the region
if ( currentDrawMarkers ){
uint theAlignment = Qt::AlignCenter;
bool hasOwnSize = false;
int theWidth = 0;
int theHeight = 0;
QColor theColor(params()->dataColor( dataset ));
int theStyle = markerStyle;
if( curPropSetId != KDChartPropertySet::UndefinedID ){
// we can safely call the following functions and ignore their
// return values since they will touch the parameters' values
// if the propSet *contains* corresponding own values only.
int iDummy;
curPropSet.hasOwnMarkerAlign( iDummy, theAlignment );
curPropSet.hasOwnMarkerColor( iDummy, theColor );
curPropSet.hasOwnMarkerStyle( iDummy, theStyle );
QSize size(theWidth, theHeight);
hasOwnSize = curPropSet.hasOwnMarkerSize(iDummy, size);
if( hasOwnSize ){
theWidth = size.width();
theHeight = size.height();
}
}
drawMarker( painter,
params(),
_areaWidthP1000, _areaHeightP1000,
_dataRect.x(),
_dataRect.y(),
markerIsOutside
? KDChartParams::LineMarker1Pixel
: theStyle,
theColor,
QPoint(x,y),
dataset, value, chart, regions,
hasOwnSize ? &theWidth : 0,
hasOwnSize ? &theHeight : 0,
theAlignment );
}
// store the region
else if( regions ) {
QRect rect(
QPoint( x-params()->lineWidth()-1, y-params()->lineWidth()-1 ),
QPoint( x+params()->lineWidth()+1, y+params()->lineWidth()+1 )
);
rect.moveBy( _dataRect.x(), _dataRect.y() );
regions->append(
new KDChartDataRegion(dataset, value, chart, rect) );
}
}
}
if ( point ) {
bool bDrawLines = (0 != params()->lineWidth());
if ( mIsArea ) {
// first draw with the fill brush, no pen, with the
// zero axis points or upper border points added for the first
// dataset or with the previous points reversed for all other
// datasets.
painter->setPen( QPen( Qt::NoPen ) );
const QBrush datasetBrush( params()->dataColor( dataset ), Qt::SolidPattern );
painter->setBrush( datasetBrush );
QBrush currentBrush( datasetBrush );
if ( mode == Normal || dataset == (int)datasetEnd ) {
/// first dataset (or any dataset in normal mode, where
/// the datasets overwrite each other)
// no 3d handling for areas yet
QPoint lastPoint = points[0]->point( point - 1 );
// zeroXAxisI can be too far below the abscissa, but it's
// the only thing we have. Likewise can 0 be too far above
// the upper boundary, but again it's the only thing we
// have, at the rest is clipped anyway.
int yCoord;
if ( params()->areaLocation() == KDChartParams::AreaBelow ||
mode == Percent )
yCoord = static_cast<int>(zeroXAxisI);
else
yCoord = static_cast<int>(axisYOffset);
// old: draw the complete area in on go:
/*
// no 3d handling for areas yet
points[0]->setPoint( point, lastPoint.x(), yCoord );
point++;
QPoint firstPoint = points[0]->point( 0 );
points[0]->setPoint( point, firstPoint.x(), yCoord );
point++;
painter->drawPolygon( *points[0], false, 0, point );
*/
// new: draw individual area segments:
curPropSetId = KDChartPropertySet::UndefinedID;
for( int value = 0; value < point-1; ++value ) {
int cellPropID;
if( data->cellProp( dataset, value, cellPropID ) &&
cellPropID != curPropSetId ){
if( cellPropID != KDChartPropertySet::UndefinedID &&
params()->calculateProperties( cellPropID,
curPropSet ) ){
curPropSetId = cellPropID;
}else{
curPropSetId = KDChartPropertySet::UndefinedID;
}
// preset with default value
QBrush theAreaBrush = datasetBrush;
if( curPropSetId != KDChartPropertySet::UndefinedID ){
// we can safely call the following functions and ignore their
// return values since they will touch the parameters' values
// if the propSet *contains* corresponding own values only.
int iDummy;
curPropSet.hasOwnAreaBrush( iDummy, theAreaBrush );
}
painter->setBrush( theAreaBrush );
}
QPointArray segment( 4 );
segment.setPoint( 0, points[0]->point( value ) );
segment.setPoint( 1, points[0]->point( value+1 ) );
segment.setPoint( 2, points[0]->point( value+1 ).x(), yCoord );
segment.setPoint( 3, points[0]->point( value ).x(), yCoord );
painter->drawPolygon( segment );
}
// old: draw the complete area in on go:
/*
// remove the last two points added
point -= 2;
*/
//qDebug("\n111");
} // if ( mode == Normal || dataset == (int)datasetEnd )
else {
// don't mess around with the original array; we'll need
// that for the next time through.
//qDebug("222");
// no 3d handling for areas yet
QPointArray thisSection = points[0]->copy();
thisSection.resize( point + previousPoints.size() );
// append the previous array (there is guaranteed to be
// one because we are at least the second time through
// here) in reverse order
for ( unsigned int i = 0; i < previousPoints.size(); ++i ) {
thisSection.setPoint( point + i,
previousPoints.point( previousPoints.size() - i - 1 ) );
//qDebug("\nx: %i",previousPoints.point( previousPoints.size() - i - 1 ).x());
//qDebug("y: %i",previousPoints.point( previousPoints.size() - i - 1 ).y());
}
painter->drawPolygon( thisSection );
}
// draw the line with no brush and outline color
painter->setBrush( Qt::NoBrush );
painter->setPen( QPen( params()->outlineDataColor(),
params()->outlineDataLineWidth() ) );
} else {
// line
if( showThreeDLines ) {
// This is a 3D line:
// We draw the line with the data color brush
// and the outline data pen.
painter->setBrush( params()->dataColor( dataset ) );
painter->setPen( QPen( params()->outlineDataColor(),
params()->outlineDataLineWidth() ) );
} else {
// This is a 2D line:
// We draw the line with the no brush
// and the data color if no special line color was specified.
painter->setBrush( Qt::NoBrush );
painter->setPen( default2DPen );
}
}
// Neither draw the contour line if this is a pure Point chart
// nor draw it for the last row of a percent area chart.
if( bDrawLines &&
( (mode != Percent) || !mIsArea || (dataset != (int)datasetEnd) ) ){
if( showThreeDLines ) {
// A 3D line needs to be drawn piece-wise
for ( int value = 0; value < point-1; ++value ) {
// if( data->cell( dataset, value ).hasValue() &&
// data->cell( dataset, value+1 ).hasValue() ) {
// qDebug( "Draw a segment in dataset %d from %d to %d", dataset, value, value+1 );
//store the rotated points ( see project() )
QPointArray rotatedSegment( 4 );
rotatedSegment.setPoint( 0, points[0]->point( value ));
rotatedSegment.setPoint( 1, points[0]->point( value+1 ) );
rotatedSegment.setPoint( 2, points[1]->point( value+1 ) );
rotatedSegment.setPoint( 3, points[1]->point( value ) );
//store the true points without rotation
QPointArray trueSegment( 4 );
trueSegment.setPoint( 0, oripoints[0]->point( value ));
trueSegment.setPoint( 1, oripoints[0]->point( value+1 ) );
trueSegment.setPoint( 2, oripoints[1]->point( value+1 ) );
trueSegment.setPoint( 3, oripoints[1]->point( value ) );
// calculate the rotated points position relative to each other
// we will then be able to keep the rotation ( see: project () )
// by reporting this position relative to the true segment line
//left side pt3 and pt0
int dx30 = rotatedSegment.point(3).x() - rotatedSegment.point(0).x();
int dy30 = rotatedSegment.point(3).y() - rotatedSegment.point(0).y();
//right side pt1 and pt2
int dx12 = rotatedSegment.point(2).x() - rotatedSegment.point(1).x();
int dy12 = rotatedSegment.point(2).y() - rotatedSegment.point(1).y();
// store and paint the "3D" segment
QPointArray segment( 4 );
segment.setPoint( 0, trueSegment.point(0) );
segment.setPoint( 1, trueSegment.point(1) );
segment.setPoint( 2, trueSegment.point(1).x() + dx12, trueSegment.point(1).y() + dy12 );
segment.setPoint( 3, trueSegment.point(0).x() + dx30, trueSegment.point(0).y() + dy30);
//PENDING Michel 3dlines drawing a segment with showThreeDLines
painter->drawPolygon( segment );
// } else
// qDebug( "Can't draw a segment in dataset %d from %d to %d", dataset, value, value+1 );
}
} else {
QPoint p1, p2;
// Note: If markers are drawn very near to each other
// and tiny markers are used
// we don't draw the connecting lines.
bool b4PMarkers = KDChartParams::LineMarker4Pixels == markerStyle;
bool bTinyMarkers =
KDChartParams::LineMarker1Pixel == markerStyle || b4PMarkers;
curPropSetId = KDChartPropertySet::UndefinedID;
painter->setPen( default2DPen );
for ( int value = 0; value < point-1; ++value ) {
p1 = points[0]->point( value );
p2 = points[0]->point( value+1 );
// Determine properties assigned to this cell
// and change the painter if necessarry:
currentDrawMarkers = defaultDrawMarkers;
int cellPropID;
if( data->cellProp( dataset, value, cellPropID ) &&
cellPropID != curPropSetId ){
if( cellPropID != KDChartPropertySet::UndefinedID &&
params()->calculateProperties( cellPropID,
curPropSet ) ){
curPropSetId = cellPropID;
}else{
curPropSetId = KDChartPropertySet::UndefinedID;
}
// preset with default values
int theLineWidth = default2DPen.width();
QColor theLineColor = default2DPen.color();
Qt::PenStyle theLineStyle = default2DPen.style();
if( curPropSetId != KDChartPropertySet::UndefinedID ){
// we can safely call the following functions and ignore their
// return values since they will touch the parameters' values
// if the propSet *contains* corresponding own values only.
int iDummy;
curPropSet.hasOwnLineWidth ( iDummy, theLineWidth );
curPropSet.hasOwnLineColor ( iDummy, theLineColor );
curPropSet.hasOwnLineStyle ( iDummy, theLineStyle );
curPropSet.hasOwnShowMarker( iDummy, currentDrawMarkers );
}
painter->setPen( QPen( theLineColor,
theLineWidth,
theLineStyle ) );
}
if( !currentDrawMarkers ){
//PENDING Michel: drawing a line - not currentMarkers
painter->drawLine( p1, p2 );
}else{
int dx = p2.x() - p1.x();
int dy = p2.y() - p1.y();
if( !bTinyMarkers || (abs(dx) > 4) || (abs(dy) > 4) ){
if( bTinyMarkers ) {
double m = !dx ? 100.0
: !dy ? 0.01
: ((double)dy / (double)dx);
double am = fabs(m);
int dxx;
int dyy;
if( 0.25 > am ){
dxx = 3;
dyy = 0;
}else if( 0.67 > am ){
dxx = 3;
dyy = 1;
}else if( 1.33 > am ){
dxx = 2;
dyy = 2;
}else if( 4.0 > am ){
dxx = 1;
dyy = 3;
}else{
dxx = 0;
dyy = 3;
}
if( 0 > dx )
dxx *= -1;
if( 0 > dy )
dyy *= -1;
if( b4PMarkers ){
if( 0 < dx )
++p1.rx();
else if( 0 > dx )
++p2.rx();
if( 0 < dy )
++p1.ry();
else if( 0 > dy )
++p2.ry();
}
p1.rx() += dxx; p1.ry() += dyy;
p2.rx() -= dxx; p2.ry() -= dyy;
}
//PENDING Michel: drawing a line - currentMarkers
painter->drawLine( p1, p2 );
}
}
}
}
}
}
// Save point array for next way through (needed for e.g. stacked
// areas), not for 3D currently
points[0]->resize( point );
previousPoints = points[0]->copy();
}
// Now draw any extra lines (and/or their markers, resp.) that
// are to be printed IN FRONT of the normal lines:
if( mChartType == KDChartParams::Line ){
for( dataset = datasetEnd; ( dataset >= (int)datasetStart && dataset >= 0 ); --dataset ) {
const KDChartParams::LineMarkerStyle
defaultMarkerStyle = params()->lineMarkerStyle( dataset );
const QPen default2DPen( params()->lineColor().isValid()
? params()->lineColor()
: params()->dataColor( dataset ),
params()->lineWidth(),
params()->lineStyle( dataset ) );
if( ai.bAbscissaHasTrueAxisDtValues )
ai.numValues = data->cols();
for ( int value = 0; value < ai.numValues; ++value ) {
int iVec = static_cast < int > ( datasetEnd-dataset ) * arrayNumValues + value;
if( allPoints[ iVec ].bValid ){
const MyPoint& mp = allPoints[iVec];
//qDebug("\np.x() %i p.y() %i", p.x(), p.y() );
// --------------------------------------------------------
// determine any 'extra' properties assigned to this cell
// by traversing the property set chain (if necessary)
// --------------------------------------------------------
int cellPropID;
if( data->cellProp( dataset, value, cellPropID ) &&
cellPropID != curPropSetId ){
if( cellPropID != KDChartPropertySet::UndefinedID &&
params()->calculateProperties( cellPropID,
curPropSet ) )
curPropSetId = cellPropID;
else
curPropSetId = KDChartPropertySet::UndefinedID;
}
if( curPropSetId != KDChartPropertySet::UndefinedID ){
drawExtraLinesAndMarkers(
curPropSet,
default2DPen,
defaultMarkerStyle,
mp.p.x(), mp.p.y(),
painter,
ai.abscissaPara,
ordinatePara,
logWidth/1000.0,
logHeight/1000.0,
true );
}
}
}
}
}
//qDebug(const_cast < KDChartParams* > ( params() )->properties( KDCHART_PROPSET_NORMAL_DATA )->name().latin1());
//qDebug(const_cast < KDChartParams* > ( params() )->properties( KDCHART_PROPSET_TRANSPARENT_DATA )->name().latin1());
//qDebug(const_cast < KDChartParams* > ( params() )->properties( KDCHART_PROPSET_HORI_LINE )->name().latin1());
//qDebug(const_cast < KDChartParams* > ( params() )->properties( KDCHART_PROPSET_VERT_LINE )->name().latin1());
//qDebug("--");
}
MStatus liqSurfaceNode::compute( const MPlug& plug, MDataBlock& block )
{
// outColor or individual R, G, B channel
if( (plug == aOutColor) || (plug.parent() == aOutColor) ||
(plug == aOutTransparency) || (plug.parent() == aOutTransparency)
) {
//cout <<"compute... "<<endl;
// init shader
MStatus status;
MFloatVector theColor( 0.0f, 0.0f, 0.0f );
MFloatVector& cColor = block.inputValue(aColor).asFloatVector();
MFloatVector& cTrans = block.inputValue(aOpacity).asFloatVector();
MFloatVector& ctex = block.inputValue(aGLPreviewTexture).asFloatVector();
// exploit maya's free openGL preview
if ( ctex != MFloatVector( -1.0, -1.0, -1.0 ) ) theColor = ctex;
else theColor = cColor;
MFloatVector resultColor( 0.0, 0.0, 0.0 );
MFloatVector resultTrans( cTrans );
// lambert calc -------------------
bool& ignoreLights = block.inputValue( aMayaIgnoreLights, &status ).asBool();
float& Ka = block.inputValue( aMayaKa, &status ).asFloat();
float& Kd = block.inputValue( aMayaKd, &status ).asFloat();
// get surface normal
MFloatVector& surfaceNormal = block.inputValue( aNormalCamera, &status ).asFloatVector();
CHECK_MSTATUS( status );
if ( ignoreLights ) {
MFloatVector cam( 0.0, 0.0, 1.0 );
float cosln = cam * surfaceNormal;
if ( cosln > 0.0f ) {
float diff = cosln * cosln * Kd + Ka;
resultColor = diff * theColor;
}
} else {
// Get light list
MArrayDataHandle lightData = block.inputArrayValue( aLightData, &status );
CHECK_MSTATUS( status );
int numLights = lightData.elementCount( &status );
CHECK_MSTATUS( status );
// Iterate through light list and get ambient/diffuse values
for( int count=1; count <= numLights; count++ )
{
// Get the current light out of the array
MDataHandle currentLight = lightData.inputValue( &status );
CHECK_MSTATUS( status );
// Get the intensity of that light
MFloatVector& lightIntensity = currentLight.child( aLightIntensity ).asFloatVector();
// Find ambient component
if ( currentLight.child( aLightAmbient ).asBool() ) {
resultColor += lightIntensity;
}
// Find diffuse component
if ( currentLight.child( aLightDiffuse ).asBool() ) {
MFloatVector& lightDirection = currentLight.child( aLightDirection ).asFloatVector();
float cosln = lightDirection * surfaceNormal;
if ( cosln > 0.0f ) resultColor += lightIntensity * cosln * Kd ;
}
// Advance to the next light.
if ( count < numLights ) {
status = lightData.next();
CHECK_MSTATUS( status );
}
}
resultColor[0] *= theColor[0];
resultColor[1] *= theColor[1];
resultColor[2] *= theColor[2];
}
resultTrans[0] = ( 1 - resultTrans[0] );
resultTrans[1] = ( 1 - resultTrans[1] );
resultTrans[2] = ( 1 - resultTrans[2] );
// set ouput color attribute
MDataHandle outColorHandle = block.outputValue( aOutColor );
MFloatVector& outColor = outColorHandle.asFloatVector();
outColor = resultColor;
outColorHandle.setClean();
MDataHandle outTransHandle = block.outputValue( aOutTransparency );
MFloatVector& outTrans = outTransHandle.asFloatVector();
outTrans = resultTrans;
outTransHandle.setClean();
} else return MS::kUnknownParameter;
return MS::kSuccess;
}
