void Controller::event_cpm_cps_auto(const char *event,const char *value) {
if(m_cpm_cps_switch == false) {
m_cpm_cps_switch = true;
flashstorage_keyval_set("CPMCPSAUTO","true");
tick_item("CPM/CPS Auto",true);
} else {
m_cpm_cps_switch = false;
flashstorage_keyval_set("CPMCPSAUTO","false");
tick_item("CPM/CPS Auto",false);
}
}
void Controller::event_neverdim(const char *event,const char *value) {
if(m_never_dim == false) {
flashstorage_keyval_set("NEVERDIM","true");
tick_item("Never Dim" ,true);
m_never_dim=true;
} else {
flashstorage_keyval_set("NEVERDIM","false");
tick_item("Never Dim" ,false);
m_never_dim=false;
}
}
/**
* Initialize the system controller. In particular:
* - Load settings
* - Setup the log interval alarm.
*/
Controller::Controller() {
m_sleeping=false;
m_powerup=false;
//m_log_interval_seconds = 60*30;
m_log_interval_seconds = 0; // default set to zero to save power
rtc_clear_alarmed();
rtc_enable_alarm(RTC);
m_interval_stored = rtc_get_time(RTC);
m_counts_stored = 0;
m_alarm_log = false;
system_controller = this;
m_last_switch_state = true;
m_never_dim = false;
bool sstate = switch_state();
m_last_switch_state = sstate;
m_warning_raised = false;
m_dim_off = false;
m_cpm_cps_switch = false;
m_current_units = 2;
m_cpm_cps_threshold = 1100.0;
m_cps_cpm_threshold = 1000.0;
// Get warning cpm from flash
m_warncpm = 0;
const char *swarncpm = flashstorage_keyval_get("WARNCPM");
if(swarncpm != 0) {
int32_t c;
sscanf(swarncpm, "%"PRIu32"", &c);
m_warncpm = c;
}
// Get never dim from flash
m_warncpm = -1;
const char *sneverdim = flashstorage_keyval_get("NEVERDIM");
if(sneverdim != 0) {
if(strcmp(sneverdim,"true") == 0) m_never_dim=true;
else m_never_dim=false;
} else m_never_dim=false;
if(m_never_dim) tick_item("Never Dim" ,true);
// Get logging interval from flash
const char *sloginter = flashstorage_keyval_get("LOGINTERVAL");
if(sloginter != 0) {
int32_t c;
sscanf(sloginter, "%"PRIu32"", &c);
m_log_interval_seconds = c;
} else {
// m_log_interval_seconds = 30*60;
m_log_interval_seconds = 0; // default set to zero to save power
}
rtc_set_alarm(RTC,rtc_get_time(RTC)+m_log_interval_seconds);
}
void Controller::event_rem(const char *event,const char *value) {
flashstorage_keyval_set("SVREM","REM");
tick_item("\x80Sv" ,false);
tick_item("\x80R",true);
}
void Controller::event_geiger_beep(const char *event,const char *value) {
system_geiger->toggle_beep();
if(system_geiger->is_beeping()) { flashstorage_keyval_set("GEIGERBEEP","true"); tick_item("Geiger Beep",true); }
else { flashstorage_keyval_set("GEIGERBEEP","false"); tick_item("Geiger Beep",false); }
}
void Controller::event_english(const char *event,const char *value) {
m_gui->set_language(LANGUAGE_ENGLISH);
flashstorage_keyval_set("LANGUAGE","English");
tick_item("English" ,true);
tick_item("Japanese",false);
}
int main(void) {
Geiger g;
power_initialise();
if(power_battery_level() < 1) {
power_standby();
}
flashstorage_initialise();
buzzer_initialise();
realtime_initialise();
g.initialise();
uint8_t *private_key = ((uint8_t *) &_binary___binary_data_private_key_data_start);
if(private_key[0] != 0) delay_us(1000);
delay_us(10000); // can be removed?
#ifndef DISABLE_ACCEL
accel_init();
#endif
Controller c(g);
switch_initialise();
// if we woke up on an alarm, we're going to be sending the system back.
#ifndef NEVERSLEEP
if(power_get_wakeup_source() == WAKEUP_RTC) {
c.m_sleeping = true;
} else {
buzzer_nonblocking_buzz(0.05);
display_initialise();
const char *devicetag = flashstorage_keyval_get("DEVICETAG");
char revtext[10];
sprintf(revtext,"VERSION: %s ",OS100VERSION);
display_splashscreen(devicetag,revtext);
delay_us(3000000);
display_clear(0);
}
#endif
#ifdef NEVERSLEEP
buzzer_nonblocking_buzz(0.05);
display_initialise();
#endif
GUI m_gui(c);
bool full = flashstorage_log_isfull();
if((full == true) && (c.m_sleeping == false)) {
m_gui.show_dialog("Flash Log","is full",0,0,0);
}
c.set_gui(m_gui);
UserInput u(m_gui);
u.initialise();
serial_initialise();
int8_t utcoffsetmins_n = 0;
const char *utcoffsetmins = flashstorage_keyval_get("UTCOFFSETMINS");
if(utcoffsetmins != 0) {
unsigned int c;
sscanf(utcoffsetmins, "%u", &c);
utcoffsetmins_n = c;
realtime_setutcoffset_mins(utcoffsetmins_n);
}
// Need to refactor out stored settings
if(c.m_sleeping == false) {
const char *sbright = flashstorage_keyval_get("BRIGHTNESS");
if(sbright != 0) {
unsigned int c;
sscanf(sbright, "%u", &c);
display_set_brightness(c);
}
const char *sbeep = flashstorage_keyval_get("GEIGERBEEP");
if(sbeep != 0) {
if(strcmp(sbeep,"true") == 0) { g.set_beep(true); tick_item("Geiger Beep",true); }
else g.set_beep(false);
}
const char *scpmcps = flashstorage_keyval_get("CPMCPSAUTO");
if(scpmcps != 0) {
if(strcmp(scpmcps,"true") == 0) { c.m_cpm_cps_switch = true; tick_item("CPM/CPS Auto",true); }
}
const char *language = flashstorage_keyval_get("LANGUAGE");
if(language != 0) {
if(strcmp(language,"English" ) == 0) { m_gui.set_language(LANGUAGE_ENGLISH); tick_item("English" ,true); } else
if(strcmp(language,"Japanese") == 0) { m_gui.set_language(LANGUAGE_JAPANESE); tick_item("Japanese" ,true); }
} else {
m_gui.set_language(LANGUAGE_ENGLISH);
tick_item("English",true);
}
const char *svrem = flashstorage_keyval_get("SVREM");
if(strcmp(svrem,"REM") == 0) { tick_item("Roentgen",true); }
else { tick_item("Sievert",true);}
}
m_gui.jump_to_screen(1);
m_gui.push_stack(0,1);
for(;;) {
if(power_battery_level() < 1) {
power_standby();
}
//display_draw_text(0,110,"preupdate",0);
c.update();
//display_draw_text(0,110,"prerender",0);
m_gui.render();
//display_draw_text(0,110,"preserial",0);
serial_eventloop();
//display_draw_text(0,110,"preserial",0);
// It might be a good idea to move the following code to Controller.
// Hack to check that captouch is ok, and reset it if not.
bool c = cap_check();
if(c == false) {
display_draw_text(0,90,"CAPFAIL",0);
cap_init();
}
// Screen lock code
uint32_t release1_time = cap_last_press(KEY_BACK);
uint32_t press1_time = cap_last_release(KEY_BACK);
uint32_t release2_time = cap_last_press(KEY_SELECT);
uint32_t press2_time = cap_last_release(KEY_SELECT);
uint32_t current_time = realtime_get_unixtime();
if((release1_time != 0) &&
(release2_time != 0) &&
((current_time-press1_time) > 3) &&
((current_time-press2_time) > 3) &&
cap_ispressed(KEY_BACK ) &&
cap_ispressed(KEY_SELECT)) {
system_gui->toggle_screen_lock();
cap_clear_press();
}
power_wfi();
}
// should never get here
for(int n=0;n<60;n++) {
delay_us(100000);
buzzer_blocking_buzz(1000);
}
return 0;
}
