static void
nmdm_task_tty(void *arg, int pending __unused)
{
struct tty *tp, *otp;
struct nmdmpart *np = arg;
char c;
tp = np->np_tty;
tty_lock(tp);
if (tty_gone(tp)) {
tty_unlock(tp);
return;
}
otp = np->np_other->np_tty;
KASSERT(otp != NULL, ("NULL otp in nmdmstart"));
KASSERT(otp != tp, ("NULL otp == tp nmdmstart"));
if (np->np_other->np_dcd) {
if (!tty_opened(tp)) {
np->np_other->np_dcd = 0;
ttydisc_modem(otp, 0);
}
} else {
if (tty_opened(tp)) {
np->np_other->np_dcd = 1;
ttydisc_modem(otp, 1);
}
}
/* This may happen when we are in detach process. */
if (tty_gone(otp)) {
tty_unlock(otp);
return;
}
while (ttydisc_rint_poll(otp) > 0) {
if (np->np_rate && !np->np_quota)
break;
if (ttydisc_getc(tp, &c, 1) != 1)
break;
np->np_quota--;
ttydisc_rint(otp, c, 0);
}
ttydisc_rint_done(otp);
tty_unlock(tp);
}
void
ucom_put_data(struct ucom_softc *sc, struct usb_page_cache *pc,
uint32_t offset, uint32_t len)
{
struct usb_page_search res;
struct tty *tp = sc->sc_tty;
char *buf;
uint32_t cnt;
mtx_assert(sc->sc_mtx, MA_OWNED);
if (tty_gone(tp))
return; /* multiport device polling */
if (len == 0)
return; /* no data */
/* set a flag to prevent recursation ? */
while (len > 0) {
usbd_get_page(pc, offset, &res);
if (res.length > len) {
res.length = len;
}
len -= res.length;
offset += res.length;
/* pass characters to tty layer */
buf = res.buffer;
cnt = res.length;
/* first check if we can pass the buffer directly */
if (ttydisc_can_bypass(tp)) {
if (ttydisc_rint_bypass(tp, buf, cnt) != cnt) {
DPRINTF("tp=%p, data lost\n", tp);
}
continue;
}
/* need to loop */
for (cnt = 0; cnt != res.length; cnt++) {
if (ttydisc_rint(tp, buf[cnt], 0) == -1) {
/* XXX what should we do? */
DPRINTF("tp=%p, lost %d "
"chars\n", tp, res.length - cnt);
break;
}
}
}
ttydisc_rint_done(tp);
}
/*------------------------------------------------------------------------*
* ucom_get_data
*
* Return values:
* 0: No data is available.
* Else: Data is available.
*------------------------------------------------------------------------*/
uint8_t
ucom_get_data(struct ucom_softc *sc, struct usb_page_cache *pc,
uint32_t offset, uint32_t len, uint32_t *actlen)
{
struct usb_page_search res;
struct tty *tp = sc->sc_tty;
uint32_t cnt;
uint32_t offset_orig;
mtx_assert(sc->sc_mtx, MA_OWNED);
if (tty_gone(tp) ||
!(sc->sc_flag & UCOM_FLAG_GP_DATA)) {
actlen[0] = 0;
return (0); /* multiport device polling */
}
offset_orig = offset;
while (len != 0) {
usbd_get_page(pc, offset, &res);
if (res.length > len) {
res.length = len;
}
/* copy data directly into USB buffer */
cnt = ttydisc_getc(tp, res.buffer, res.length);
offset += cnt;
len -= cnt;
if (cnt < res.length) {
/* end of buffer */
break;
}
}
actlen[0] = offset - offset_orig;
DPRINTF("cnt=%d\n", actlen[0]);
if (actlen[0] == 0) {
return (0);
}
return (1);
}
int
ttyinq_read_uio(struct ttyinq *ti, struct tty *tp, struct uio *uio,
size_t rlen, size_t flen)
{
MPASS(rlen <= uio->uio_resid);
while (rlen > 0) {
int error;
struct ttyinq_block *tib;
size_t cbegin, cend, clen;
/* See if there still is data. */
if (ti->ti_begin == ti->ti_linestart)
return (0);
tib = ti->ti_firstblock;
if (tib == NULL)
return (0);
/*
* The end address should be the lowest of these three:
* - The write pointer
* - The blocksize - we can't read beyond the block
* - The end address if we could perform the full read
*/
cbegin = ti->ti_begin;
cend = MIN(MIN(ti->ti_linestart, ti->ti_begin + rlen),
TTYINQ_DATASIZE);
clen = cend - cbegin;
MPASS(clen >= flen);
rlen -= clen;
/*
* We can prevent buffering in some cases:
* - We need to read the block until the end.
* - We don't need to read the block until the end, but
* there is no data beyond it, which allows us to move
* the write pointer to a new block.
*/
if (cend == TTYINQ_DATASIZE || cend == ti->ti_end) {
/*
* Fast path: zero copy. Remove the first block,
* so we can unlock the TTY temporarily.
*/
TTYINQ_REMOVE_HEAD(ti);
ti->ti_begin = 0;
/*
* Because we remove the first block, we must
* fix up the block offsets.
*/
#define CORRECT_BLOCK(t) do { \
if (t <= TTYINQ_DATASIZE) \
t = 0; \
else \
t -= TTYINQ_DATASIZE; \
} while (0)
CORRECT_BLOCK(ti->ti_linestart);
CORRECT_BLOCK(ti->ti_reprint);
CORRECT_BLOCK(ti->ti_end);
#undef CORRECT_BLOCK
/*
* Temporary unlock and copy the data to
* userspace. We may need to flush trailing
* bytes, like EOF characters.
*/
tty_unlock(tp);
error = uiomove(tib->tib_data + cbegin,
clen - flen, uio);
tty_lock(tp);
/* Block can now be readded to the list. */
TTYINQ_RECYCLE(ti, tib);
} else {
char ob[TTYINQ_DATASIZE - 1];
/*
* Slow path: store data in a temporary buffer.
*/
memcpy(ob, tib->tib_data + cbegin, clen - flen);
ti->ti_begin += clen;
MPASS(ti->ti_begin < TTYINQ_DATASIZE);
/* Temporary unlock and copy the data to userspace. */
tty_unlock(tp);
error = uiomove(ob, clen - flen, uio);
tty_lock(tp);
}
if (error != 0)
return (error);
if (tty_gone(tp))
return (ENXIO);
}
return (0);
}
void
ucom_put_data(struct ucom_softc *sc, struct usb_page_cache *pc,
uint32_t offset, uint32_t len)
{
struct usb_page_search res;
struct tty *tp = sc->sc_tty;
char *buf;
uint32_t cnt;
UCOM_MTX_ASSERT(sc, MA_OWNED);
if (sc->sc_flag & UCOM_FLAG_CONSOLE) {
unsigned int temp;
/* get maximum RX length */
temp = (UCOM_CONS_BUFSIZE - 1) - ucom_cons_rx_high + ucom_cons_rx_low;
temp %= UCOM_CONS_BUFSIZE;
/* limit RX length */
if (temp > (UCOM_CONS_BUFSIZE - ucom_cons_rx_high))
temp = (UCOM_CONS_BUFSIZE - ucom_cons_rx_high);
if (temp > len)
temp = len;
/* copy out data */
usbd_copy_out(pc, offset, ucom_cons_rx_buf + ucom_cons_rx_high, temp);
/* update counters */
ucom_cons_rx_high += temp;
ucom_cons_rx_high %= UCOM_CONS_BUFSIZE;
return;
}
if (tty_gone(tp))
return; /* multiport device polling */
if (len == 0)
return; /* no data */
/* set a flag to prevent recursation ? */
while (len > 0) {
usbd_get_page(pc, offset, &res);
if (res.length > len) {
res.length = len;
}
len -= res.length;
offset += res.length;
/* pass characters to tty layer */
buf = res.buffer;
cnt = res.length;
/* first check if we can pass the buffer directly */
if (ttydisc_can_bypass(tp)) {
/* clear any jitter buffer */
sc->sc_jitterbuf_in = 0;
sc->sc_jitterbuf_out = 0;
if (ttydisc_rint_bypass(tp, buf, cnt) != cnt) {
DPRINTF("tp=%p, data lost\n", tp);
}
continue;
}
/* need to loop */
for (cnt = 0; cnt != res.length; cnt++) {
if (sc->sc_jitterbuf_in != sc->sc_jitterbuf_out ||
ttydisc_rint(tp, buf[cnt], 0) == -1) {
uint16_t end;
uint16_t pos;
pos = sc->sc_jitterbuf_in;
end = sc->sc_jitterbuf_out +
UCOM_JITTERBUF_SIZE - 1;
if (end >= UCOM_JITTERBUF_SIZE)
end -= UCOM_JITTERBUF_SIZE;
for (; cnt != res.length; cnt++) {
if (pos == end)
break;
sc->sc_jitterbuf[pos] = buf[cnt];
pos++;
if (pos >= UCOM_JITTERBUF_SIZE)
pos -= UCOM_JITTERBUF_SIZE;
}
sc->sc_jitterbuf_in = pos;
/* set RTS in async fashion */
if (sc->sc_flag & UCOM_FLAG_RTS_IFLOW)
ucom_rts(sc, 1);
DPRINTF("tp=%p, lost %d "
"chars\n", tp, res.length - cnt);
break;
}
}
}
ttydisc_rint_done(tp);
}
/*------------------------------------------------------------------------*
* ucom_get_data
*
* Return values:
* 0: No data is available.
* Else: Data is available.
*------------------------------------------------------------------------*/
uint8_t
ucom_get_data(struct ucom_softc *sc, struct usb_page_cache *pc,
uint32_t offset, uint32_t len, uint32_t *actlen)
{
struct usb_page_search res;
struct tty *tp = sc->sc_tty;
uint32_t cnt;
uint32_t offset_orig;
UCOM_MTX_ASSERT(sc, MA_OWNED);
if (sc->sc_flag & UCOM_FLAG_CONSOLE) {
unsigned int temp;
/* get total TX length */
temp = ucom_cons_tx_high - ucom_cons_tx_low;
temp %= UCOM_CONS_BUFSIZE;
/* limit TX length */
if (temp > (UCOM_CONS_BUFSIZE - ucom_cons_tx_low))
temp = (UCOM_CONS_BUFSIZE - ucom_cons_tx_low);
if (temp > len)
temp = len;
/* copy in data */
usbd_copy_in(pc, offset, ucom_cons_tx_buf + ucom_cons_tx_low, temp);
/* update counters */
ucom_cons_tx_low += temp;
ucom_cons_tx_low %= UCOM_CONS_BUFSIZE;
/* store actual length */
*actlen = temp;
return (temp ? 1 : 0);
}
if (tty_gone(tp) ||
!(sc->sc_flag & UCOM_FLAG_GP_DATA)) {
actlen[0] = 0;
return (0); /* multiport device polling */
}
offset_orig = offset;
while (len != 0) {
usbd_get_page(pc, offset, &res);
if (res.length > len) {
res.length = len;
}
/* copy data directly into USB buffer */
cnt = ttydisc_getc(tp, res.buffer, res.length);
offset += cnt;
len -= cnt;
if (cnt < res.length) {
/* end of buffer */
break;
}
}
actlen[0] = offset - offset_orig;
DPRINTF("cnt=%d\n", actlen[0]);
if (actlen[0] == 0) {
return (0);
}
return (1);
}
