示例#1
0
void MMA_init(void) {
		uint8_t data2[2];
		twi_master_transfer(MMA_ADDRESS, mma_init_cmd, 2, TWI_ISSUE_STOP);
        twi_master_transfer(MMA_ADDRESS, mma_init_cmd2, 2, TWI_ISSUE_STOP);
		twi_master_transfer(MMA_ADDRESS, mma_reg_who_am_i, 1, TWI_DONT_ISSUE_STOP);
		twi_master_transfer(MMA_ADDRESS | TWI_READ_BIT, data2, 1, TWI_ISSUE_STOP);
}
示例#2
0
文件: fb.c 项目: M-Blocks/MBlocks-MB
bool fb_getTopLEDs(uint8_t faceNum, bool *redOn, bool *greenOn, bool *blueOn) {
    uint8_t twiBuf[2];
    bool success = true;

    if ((faceNum < 1) || (faceNum > 6)) {
	return false;
    }

    twi_master_init();

    twiBuf[0] = FB_REGISTER_ADDR_LEDS_TOP;

    success &= twi_master_transfer((faceNum << 1), twiBuf, 1, true);
    success &= twi_master_transfer((faceNum << 1) | TWI_READ_BIT, twiBuf, 1, true);

    twi_master_deinit();

    if (success) {
	*redOn = (twiBuf[0] & 0x01) ? true : false;
	*greenOn = (twiBuf[0] & 0x02) ? true : false;
	*blueOn = (twiBuf[0] & 0x04) ? true : false;
    }

    return success;
}
示例#3
0
文件: fb.c 项目: M-Blocks/MBlocks-MB
bool fb_getIRTxLEDs(uint8_t faceNum, bool *led1, bool *led2, bool *led3, bool *led4) {
    uint8_t twiBuf[2];
    bool success = true;

    if ((faceNum < 1) || (faceNum > 6)) {
	return -1;
    }

    twi_master_init();

    twiBuf[0] = FB_REGISTER_ADDR_TX_LED_SELECT;

    success &= twi_master_transfer((faceNum << 1), twiBuf, 1, true);
    success &= twi_master_transfer((faceNum << 1) | TWI_READ_BIT, twiBuf, 1, true);

    twi_master_deinit();

    if (success) {
	*led1 = (twiBuf[0] & 0x01) ? true : false;
	*led2 = (twiBuf[0] & 0x02) ? true : false;
	*led3 = (twiBuf[0] & 0x04) ? true : false;
	*led4 = (twiBuf[0] & 0x08) ? true : false;
    }

    return success;
}
示例#4
0
文件: fb.c 项目: M-Blocks/MBlocks-MB
bool fb_getRxEnable(uint8_t faceNum, bool *rxEnabled) {
    uint8_t twiBuf[2];
    bool success = true;

    if (faceNum > 6) {
	return -1;
    }

    twi_master_init();

    twiBuf[0] = FB_REGISTER_ADDR_RX_ENABLE;

    success &= twi_master_transfer((faceNum << 1), twiBuf, 1, true);
    success &= twi_master_transfer((faceNum << 1) | TWI_READ_BIT, twiBuf, 1, true);

    twi_master_deinit();

    if (twiBuf[0] & 0x01) {
	*rxEnabled = true;
    } else {
	*rxEnabled = false;
    }

    return success;
}
示例#5
0
bool mpu6050_register_read(uint8_t register_address, uint8_t *destination, uint8_t number_of_bytes)
{
  bool transfer_succeeded;
  transfer_succeeded = twi_master_transfer(m_device_address, &register_address, 1, TWI_DONT_ISSUE_STOP);
  transfer_succeeded &= twi_master_transfer(m_device_address|TWI_READ_BIT, destination, number_of_bytes, TWI_ISSUE_STOP);
  return transfer_succeeded;
}
示例#6
0
文件: fb.c 项目: M-Blocks/MBlocks-MB
int16_t fb_getAmbientLight(uint8_t faceNum) {
    uint8_t twiBuf[2];
    bool success = true;
    int16_t ambientLight;

    if ((faceNum < 1) || (faceNum > 6)) {
	return -1;
    }

    twi_master_init();

    twiBuf[0] = FB_REGISTER_ADDR_AMBIENT_LIGHT;

    success &= twi_master_transfer((faceNum << 1), twiBuf, 1, true);
    success &= twi_master_transfer((faceNum << 1) | TWI_READ_BIT, twiBuf, 2, true);

    twi_master_deinit();

    /* The 10-bit result is returned left-shifted so that it is possible to
     * read just one byte and still get most of the resolution (even though
     * we still read both bytes). */
    ambientLight  = twiBuf[0] << 2;
    ambientLight |= twiBuf[1] >> 6;

    if (!success) {
	ambientLight = -1;
    }

    return ambientLight;
}
示例#7
0
bool AT24CXX_ReadOneByte(uint8_t register_address, uint8_t *destination, uint8_t number_of_bytes)
{
  bool transfer_succeeded;
  transfer_succeeded = twi_master_transfer(AT24XXADDRESS, &register_address, 1, TWI_DONT_ISSUE_STOP);
  transfer_succeeded &= twi_master_transfer(AT24XXADDRESS|TWI_READ_BIT, destination, number_of_bytes, TWI_ISSUE_STOP);
  return transfer_succeeded;
}
示例#8
0
/**
 * @brief Function for reading the current configuration of the sensor.
 *
 * @return uint8_t Zero if communication with the sensor failed. Contents (always non-zero) of configuration register (@ref SHT2X_ONESHOT_MODE and @ref SHT2X_CONVERSION_DONE) if communication succeeded.
 */
static sht2x_error_t sht2x_config_read(user_register_t* user_register)
{
  read_config_result_t result;

  sht2x_error_t error = SHT2X_ERROR_NONE;
  uint8_t command = USER_REG_R;

  // Write: command protocol
  if (twi_master_transfer(SHT2X_I2C_ADDRESS, &command, 1, TWI_DONT_ISSUE_STOP))
  {
    if (twi_master_transfer(SHT2X_I2C_ADDRESS | TWI_READ_BIT, (uint8_t*)&result.raw, sizeof(read_config_result_t), TWI_DONT_ISSUE_STOP)) // Read: current configuration
    {
      // validate checksum
      uint8_t checksum_error = sht2x_check_crc((uint8_t*)&result.result.user_register, sizeof(user_register_t), result.result.checksum);

      if (checksum_error == SHT2X_ERROR_CRC || checksum_error)
      {
        // propagate out the error.  Poor design probably.
        return SHT2X_ERROR_CRC;
      }
      // Read succeeded
      *user_register = result.raw;
    }
    else
    {
      error = SHT2X_ERROR_READ_FAILED;
    }
  }
  else
  {
    error = SHT2X_ERROR_READ_FAILED;
  }
  return error;
}
static void
adc121c02_read_register(uint8_t addr, void *data, size_t len)
{
        uint8_t cmd[] = { addr };

        twi_master_transfer(ADC121C02, cmd, sizeof(cmd), TWI_DONT_ISSUE_STOP);
        twi_master_transfer(ADC121C02 | TWI_READ_BIT, data, len, TWI_ISSUE_STOP);
}
示例#10
0
bool hs3000a_read(uint8_t register_address, uint8_t * destination, uint8_t number_of_bytes)
{
    bool transfer_succeeded;
	
    transfer_succeeded  = twi_master_transfer(HS3000A_ADDR, &register_address, 1, TWI_DONT_ISSUE_STOP);
    transfer_succeeded &= twi_master_transfer(HS3000A_ADDR|TWI_READ_BIT, destination, number_of_bytes, TWI_ISSUE_STOP);
    return transfer_succeeded;
}
示例#11
0
bool read_registers(uint8_t device_address, uint8_t register_address, int size, uint8_t *value)
{
  bool transfer_succeeded = true;
  transfer_succeeded &= twi_master_transfer(device_address, &register_address, 1, TWI_DONT_ISSUE_STOP);
  if (transfer_succeeded) 
  {
    transfer_succeeded &= twi_master_transfer(device_address | TWI_READ_BIT, value, size, TWI_ISSUE_STOP);
  }
  return transfer_succeeded;
}  
示例#12
0
bool mpu6050_readBytes(uint8_t addr, uint8_t *data, uint8_t nBytes) {
	bool success = true;

	/* The caller must initialize the TWI interface */
	if (!twi_master_get_init()) {
		return false;
	}

	success &= twi_master_transfer((mpu6050Address<<1), &addr, 1, TWI_DONT_ISSUE_STOP);
	success &= twi_master_transfer((mpu6050Address<<1) | TWI_READ_BIT, data, nBytes, TWI_ISSUE_STOP);
	return success;
}
示例#13
0
文件: db.c 项目: M-Blocks/MBlocks-MB
bool db_getVersion(char *verStr, uint8_t verStrSize) {
    uint8_t twiBuf[34];
    uint32_t time_ms;
    char *strPtr;

    twi_master_init();

    twiBuf[0] = DB_VERSION_CMD;

    if (!twi_master_transfer((DB_TWI_ADDR << 1), twiBuf, 1, true)) {
	twi_master_deinit();
	return false;
    }

    delay_ms(DB_POLL_FIRST_INTERVAL_MS);

    for (time_ms = 0; time_ms < DB_VERSION_TIMEOUT_MS; time_ms += DB_POLL_INTERVAL_MS) {
	if (!twi_master_transfer((DB_TWI_ADDR << 1) | TWI_READ_BIT, twiBuf, sizeof(twiBuf), true)) {
	    /* If the daughterboard fails to respond to the I2C master read,
	     * something is wrong, so we return failure. */
	    twi_master_deinit();
	    return false;
	}

	/* If the daughterboard responds and echoes the command code in the the
	 * first byte, and the second byte is 0x01, the version command was
	 * successful. */
	if ((twiBuf[0] == DB_VERSION_CMD) && (twiBuf[1] == 0x01)) {
	    /* The following bytes contain a human-readable version string. */
	    strPtr = (char *)&twiBuf[2];
	    /* If the version string will fit into the buffer provided by the
	     * caller, we copy it.  Otherwise, we copy whatever will fit and
	     * add a null-terminator. */
	    if (strlen(strPtr) < verStrSize) {
		strcpy(verStr, strPtr);
	    } else {
		strncpy(verStr, strPtr, verStrSize - 1);
		verStr[verStrSize-1] = '\0';
	    }

	    twi_master_deinit();
	    return true;
	}

	/* If the daughterboard responded but has not yet processed the command
	 * we delay and then try to read from the daughterboard again. */
	delay_ms(DB_POLL_INTERVAL_MS);
    }

    twi_master_deinit();
    return false;
}
示例#14
0
文件: db.c 项目: M-Blocks/MBlocks-MB
bool db_setLEDs(bool redOn, bool greenOn, bool blueOn) {
    uint8_t twiBuf[2];
    uint32_t time_ms;

    twi_master_init();

    twiBuf[0] = DB_LED_CMD;

    twiBuf[1] = 0x00;
    if (redOn) {
	twiBuf[1] |= 0x01;
    }

    if (greenOn) {
	twiBuf[1] |= 0x02;
    }

    if (blueOn) {
	twiBuf[1] |= 0x04;
    }

    if (!twi_master_transfer((DB_TWI_ADDR << 1), twiBuf, 2, true)) {
	twi_master_deinit();
	return false;
    }

    delay_ms(DB_POLL_FIRST_INTERVAL_MS);

    for (time_ms = 0; time_ms < DB_LED_TIMEOUT_MS; time_ms += DB_POLL_INTERVAL_MS) {
	if (!twi_master_transfer((DB_TWI_ADDR << 1) | TWI_READ_BIT, twiBuf, sizeof(twiBuf), true)) {
	    /* If the daughterboard fails to respond to the I2C master read,
	     * something is wrong, so we return failure. */
	    twi_master_deinit();
	    return false;
	}

	/* If the daughterboard responds and echoes the command code in the the
	 * first byte, and the second byte is 0x01, the temperature command was
	 * successful. */
	if ((twiBuf[0] == DB_LED_CMD) && (twiBuf[1] == 0x01)) {
	    twi_master_deinit();
	    return true;
	}

	/* If the daughterboard responded but has not yet processed the command
	 * we delay and then try to read from the daughterboard again. */
	delay_ms(DB_POLL_INTERVAL_MS);
    }

    twi_master_deinit();
    return false;
}
示例#15
0
bool nrf6350_lcd_set_contrast(uint8_t contrast)
{
  nrf_delay_us(10000);
  data_buffer[0] = FUNC_SET;
  data_buffer[1] = 0x70 | contrast;
  return twi_master_transfer(LCD_ADDR << 1, data_buffer, 2, TWI_ISSUE_STOP);
}
示例#16
0
static bool nrf6350_lcd_set_instruction(uint8_t instr)
{
  nrf_delay_us(10000);
  data_buffer[0] = FUNC_SET;
  data_buffer[1] = instr;
  return twi_master_transfer(LCD_ADDR << 1, data_buffer, 2, TWI_ISSUE_STOP);
}
示例#17
0
bool ds1624_init(uint8_t device_address)
{
    bool transfer_succeeded = true;
    m_device_address = DS1634_BASE_ADDRESS + (uint8_t)(device_address << 1);

    uint8_t config = ds1624_config_read();

    if (config != 0)
    {
        // Configure DS1624 for 1SHOT mode if not done so already.
        if (!(config & DS1624_ONESHOT_MODE))
        {
            uint8_t data_buffer[2];

            data_buffer[0] = command_access_config;
            data_buffer[1] = DS1624_ONESHOT_MODE;

            transfer_succeeded &= twi_master_transfer(m_device_address, data_buffer, 2, TWI_ISSUE_STOP);
        }
    }
    else
    {
        transfer_succeeded = false;
    }

    return transfer_succeeded;
}
示例#18
0
bool  nrf6350_js_get_value(int8_t *val)
{
  uint8_t js_data;

  if (!twi_master_transfer(JS_ADDR << 1 | TWI_READ_BIT, data_buffer, 1, TWI_ISSUE_STOP))
    return false;
  js_data = (~data_buffer[0] & 0x1D);        // Select the useful bits.

  if((js_data & 0x01) != 0)                  // Check joystick position.
  {
    val[X] = -1;
  }
  else if((js_data & 0x10) != 0)
  {
    val[X] = 1;
  }
  else
  {
    val[X] = 0;
  }

  if((js_data & 0x04) != 0)
  {
    val[Y] = 1;
  }
  else if((js_data & 0x08) != 0)
  {
    val[Y] = -1;
  }
  else
  {
    val[Y] = 0;
  }
  return true;
}
示例#19
0
文件: fb.c 项目: M-Blocks/MBlocks-MB
bool fb_sleep(uint8_t faceNum, bool sleepEnabled) {
    uint8_t twiBuf[2];
    bool success;

    if (faceNum > 6) {
	return false;
    }

    twi_master_init();

    twiBuf[0] = FB_REGISTER_ADDR_SLEEP;
    if (sleepEnabled) {
	twiBuf[1] = 0x01;
    } else {
	twiBuf[1] = 0x00;
    }

    success = twi_master_transfer((faceNum << 1), twiBuf, 2, true);

    /* After sending a sleep command, we do not attempt to read a response
     * because doing so will wake-up the daughterboard processor. */
    twi_master_deinit();

    return success;
}
示例#20
0
bool nrf6350_lcd_off(void)
{
  nrf_delay_us(10000);
  data_buffer[0] = FUNC_SET;
  data_buffer[1] = 0x08;
  return twi_master_transfer(LCD_ADDR << 1, data_buffer, 2, TWI_ISSUE_STOP);
}
示例#21
0
bool AT24CXX_WriteOneByte(uint8_t register_address, uint8_t value)
{	
	uint8_t w2_data[2];
	
	w2_data[0] = register_address;
	w2_data[1] = value;
  return twi_master_transfer(AT24XXADDRESS, w2_data, 2, TWI_ISSUE_STOP);	  
}
示例#22
0
文件: lcd.c 项目: aep/nrfbot
// send data
size_t rgb_lcd_write(uint8_t value)
{

    unsigned char dta[2] = {0x40, value};
// ardunio:    i2c_send_byteS(dta, 2);
    twi_master_transfer (LCD_ADDRESS, dta, 2, true);
    return 1; // assume sucess
}
示例#23
0
文件: oled.c 项目: CorBiNO/Atomwear
/**********************************************
//
// write cmd api

**********************************************/
void Write_Command(uint8_t command)
{
    uint8_t send[2];
    // send[0] = Slave_Address;
    send[0] = OP_Command;
    send[1] = command;
    twi_master_transfer(Slave_Address, send, 2 ,TWI_ISSUE_STOP );
}
示例#24
0
文件: oled.c 项目: CorBiNO/Atomwear
/**********************************************
//
// write data api
//
**********************************************/
void Write_Data(uint8_t data)
{
    uint8_t send[2];
    // send[0] = Slave_Address;
    send[0] = OP_Data;
    send[1] = data;
    twi_master_transfer(Slave_Address, send, 2 ,TWI_ISSUE_STOP );
}
示例#25
0
bool mpu6050_writeBytes(uint8_t *addrData, uint8_t nBytes) {
	/* The caller must initialize the TWI interface */
	if (!twi_master_get_init()) {
		return false;
	}

	return twi_master_transfer((mpu6050Address<<1), addrData, nBytes, TWI_ISSUE_STOP);
}
示例#26
0
char mpu6050_read(uint8_t device_addr, uint8_t register_addr, uint8_t *register_data, uint8_t read_length)
{
    if(read_length < 1)
    {
        xprintf("read length error.\r\n");
        return false;
    }
    else
    {
        device_addr = (device_addr << 1) & 0xFE;
        twi_master_transfer(device_addr, &register_addr, 1, TWI_DONT_ISSUE_STOP); // write
        
        device_addr = device_addr | 0x01;
        twi_master_transfer(device_addr, register_data, read_length, TWI_ISSUE_STOP); // read
        return true;
    }
}
示例#27
0
bool mpu6050_register_write(uint8_t register_address, uint8_t value)
{	
	uint8_t w2_data[2];
	
	w2_data[0] = register_address;
	w2_data[1] = value;
  return twi_master_transfer(m_device_address, w2_data, 2, TWI_ISSUE_STOP);	  
}
示例#28
0
static bool hs3000a_write(uint8_t register_address, uint8_t value)
{
    uint8_t w2_data[2];

    w2_data[0] = register_address;
    w2_data[1] = value;
    return twi_master_transfer(HS3000A_ADDR, w2_data, 2, TWI_ISSUE_STOP);
}
void
tcs3771_init(void)
{
        uint8_t data[] = {
                TCS3771_CONTROL_PDIODE_IR
        };
        tcs3771_write_register(TCS3771_CONTROL, data, sizeof(data));

        uint8_t data2[] = {
                1
        };
        tcs3771_write_register(TCS3771_PPULSE, data2, sizeof(data2));

        uint8_t data3[] = {
                216
        };
        tcs3771_write_register(TCS3771_WTIME, data3, sizeof(data3));

        uint16_t data4[] = {
                0x130,          /* lower limit */
                0x170           /* high limit */
        };
        tcs3771_write_register(TCS3771_PILT, data4, sizeof(data4));

        uint16_t data6[] = {
                0x130,          /* lower limit */
                0x170           /* high limit */
        };
        tcs3771_write_register(TCS3771_AILT, data6, sizeof(data6));

        uint8_t data5[] = {
                TCS3771_PERS_PPERS(10)
        };
        tcs3771_write_register(TCS3771_PERS, data5, sizeof(data5));

        uint8_t data1[] = {
                TCS3771_ENABLE_PON | TCS3771_ENABLE_PEN | TCS3771_ENABLE_WEN | TCS3771_ENABLE_AEN | TCS3771_ENABLE_PIEN | TCS3771_ENABLE_AIEN
        };
        tcs3771_write_register(TCS3771_ENABLE, data1, sizeof(data1));

        //reset RGBC and PROX INTs
        uint8_t int_reset[] = {
                // 0x05 CLEAR PROX INT
                // 0x06 CLEAR RGBC INT
                // 0x07 CLEAR BOTH INT
                TCS3771_COMMAND_SELECT | TCS3771_COMMAND_TYPE_SPECIAL | 0x07
        };
        twi_master_transfer(TCS3771, int_reset, sizeof(int_reset), TWI_ISSUE_STOP);
        
        uint8_t rgb_cycles[] = {
                252
        };
        tcs3771_write_register(TCS3771_ATIME, rgb_cycles, sizeof(rgb_cycles));
        uint8_t prox_cycles[] = {
                254
        };
        tcs3771_write_register(TCS3771_PTIME, prox_cycles, sizeof(prox_cycles));
}
示例#30
0
bool nrf6350_lcd_clear(void)
{
  nrf_delay_us(10000);
  data_buffer[0] = FUNC_SET;
  data_buffer[1] = (uint8_t)(DDRAM_ADR + LCD_UPPER_LINE);
  if (!twi_master_transfer(LCD_ADDR << 1, data_buffer, 2, TWI_ISSUE_STOP))
    return false;
  if (!twi_master_transfer(LCD_ADDR << 1, empty_str, 18, TWI_ISSUE_STOP))
  {
    return false;
  }
  data_buffer[1] = DDRAM_ADR + LCD_LOWER_LINE;
  if (!twi_master_transfer(LCD_ADDR << 1, data_buffer, 2, TWI_ISSUE_STOP))
    return false;
  if (!twi_master_transfer(LCD_ADDR << 1, empty_str, 18, TWI_ISSUE_STOP))
    return false;
  return true;
}