/** * ubifs_write_node - write node to the media. * @c: UBIFS file-system description object * @buf: the node to write * @len: node length * @lnum: logical eraseblock number * @offs: offset within the logical eraseblock * @dtype: node life-time hint (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN) * * This function automatically fills node magic number, assigns sequence * number, and calculates node CRC checksum. The length of the @buf buffer has * to be aligned to the minimal I/O unit size. This function automatically * appends padding node and padding bytes if needed. Returns zero in case of * success and a negative error code in case of failure. */ int ubifs_write_node(struct ubifs_info *c, void *buf, int len, int lnum, int offs, int dtype) { int err, buf_len = ALIGN(len, c->min_io_size); dbg_io("LEB %d:%d, %s, length %d (aligned %d)", lnum, offs, dbg_ntype(((struct ubifs_ch *)buf)->node_type), len, buf_len); ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0); ubifs_assert(offs % c->min_io_size == 0 && offs < c->leb_size); ubifs_assert(!c->ro_media && !c->ro_mount); ubifs_assert(!c->space_fixup); if (c->ro_error) return -EROFS; ubifs_prepare_node(c, buf, len, 1); err = ubi_leb_write(c->ubi, lnum, buf, offs, buf_len, dtype); if (err) { ubifs_err("cannot write %d bytes to LEB %d:%d, error %d", buf_len, lnum, offs, err); dbg_dump_node(c, buf); dbg_dump_stack(); } return err; }
int ubiblk_flush_writecache(struct ubiblk_dev *ubiblk) { if (STATE_UNUSED == ubiblk->write_cache_state) return 0; ubi_leb_write(ubiblk->uv, ubiblk->vbw, ubiblk->write_cache, 0, ubiblk->uv->vol->usable_leb_size, UBI_UNKNOWN); ubiblk->write_cache_state = STATE_UNUSED; return 0; }
/** * ubifs_wbuf_sync_nolock - synchronize write-buffer. * @wbuf: write-buffer to synchronize * * This function synchronizes write-buffer @buf and returns zero in case of * success or a negative error code in case of failure. */ int ubifs_wbuf_sync_nolock(struct ubifs_wbuf *wbuf) { struct ubifs_info *c = wbuf->c; int err, dirt; cancel_wbuf_timer_nolock(wbuf); if (!wbuf->used || wbuf->lnum == -1) /* Write-buffer is empty or not seeked */ return 0; dbg_io("LEB %d:%d, %d bytes", wbuf->lnum, wbuf->offs, wbuf->used); ubifs_assert(!(c->vfs_sb->s_flags & MS_RDONLY)); ubifs_assert(!(wbuf->avail & 7)); ubifs_assert(wbuf->offs + c->min_io_size <= c->leb_size); if (c->ro_media) return -EROFS; ubifs_pad(c, wbuf->buf + wbuf->used, wbuf->avail); err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs, c->min_io_size, wbuf->dtype); if (err) { ubifs_err("cannot write %d bytes to LEB %d:%d", c->min_io_size, wbuf->lnum, wbuf->offs); dbg_dump_stack(); return err; } dirt = wbuf->avail; spin_lock(&wbuf->lock); wbuf->offs += c->min_io_size; wbuf->avail = c->min_io_size; wbuf->used = 0; wbuf->next_ino = 0; spin_unlock(&wbuf->lock); if (wbuf->sync_callback) err = wbuf->sync_callback(c, wbuf->lnum, c->leb_size - wbuf->offs, dirt); return err; }
int ubifs_leb_write(struct ubifs_info *c, int lnum, const void *buf, int offs, int len) { int err; ubifs_assert(!c->ro_media && !c->ro_mount); if (c->ro_error) return -EROFS; if (!dbg_is_tst_rcvry(c)) err = ubi_leb_write(c->ubi, lnum, buf, offs, len); else err = dbg_leb_write(c, lnum, buf, offs, len); if (err) { ubifs_err("writing %d bytes to LEB %d:%d failed, error %d", len, lnum, offs, err); ubifs_ro_mode(c, err); dbg_dump_stack(); } return err; }
/** * ubifs_wbuf_write_nolock - write data to flash via write-buffer. * @wbuf: write-buffer * @buf: node to write * @len: node length * * This function writes data to flash via write-buffer @wbuf. This means that * the last piece of the node won't reach the flash media immediately if it * does not take whole max. write unit (@c->max_write_size). Instead, the node * will sit in RAM until the write-buffer is synchronized (e.g., by timer, or * because more data are appended to the write-buffer). * * This function returns zero in case of success and a negative error code in * case of failure. If the node cannot be written because there is no more * space in this logical eraseblock, %-ENOSPC is returned. */ int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len) { struct ubifs_info *c = wbuf->c; int err, written, n, aligned_len = ALIGN(len, 8); dbg_io("%d bytes (%s) to jhead %s wbuf at LEB %d:%d", len, dbg_ntype(((struct ubifs_ch *)buf)->node_type), dbg_jhead(wbuf->jhead), wbuf->lnum, wbuf->offs + wbuf->used); ubifs_assert(len > 0 && wbuf->lnum >= 0 && wbuf->lnum < c->leb_cnt); ubifs_assert(wbuf->offs >= 0 && wbuf->offs % c->min_io_size == 0); ubifs_assert(!(wbuf->offs & 7) && wbuf->offs <= c->leb_size); ubifs_assert(wbuf->avail > 0 && wbuf->avail <= wbuf->size); ubifs_assert(wbuf->size >= c->min_io_size); ubifs_assert(wbuf->size <= c->max_write_size); ubifs_assert(wbuf->size % c->min_io_size == 0); ubifs_assert(mutex_is_locked(&wbuf->io_mutex)); ubifs_assert(!c->ro_media && !c->ro_mount); ubifs_assert(!c->space_fixup); if (c->leb_size - wbuf->offs >= c->max_write_size) ubifs_assert(!((wbuf->offs + wbuf->size) % c->max_write_size)); if (c->leb_size - wbuf->offs - wbuf->used < aligned_len) { err = -ENOSPC; goto out; } cancel_wbuf_timer_nolock(wbuf); if (c->ro_error) return -EROFS; if (aligned_len <= wbuf->avail) { /* * The node is not very large and fits entirely within * write-buffer. */ memcpy(wbuf->buf + wbuf->used, buf, len); if (aligned_len == wbuf->avail) { dbg_io("flush jhead %s wbuf to LEB %d:%d", dbg_jhead(wbuf->jhead), wbuf->lnum, wbuf->offs); err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs, wbuf->size, wbuf->dtype); if (err) goto out; spin_lock(&wbuf->lock); wbuf->offs += wbuf->size; if (c->leb_size - wbuf->offs >= c->max_write_size) wbuf->size = c->max_write_size; else wbuf->size = c->leb_size - wbuf->offs; wbuf->avail = wbuf->size; wbuf->used = 0; wbuf->next_ino = 0; spin_unlock(&wbuf->lock); } else { spin_lock(&wbuf->lock); wbuf->avail -= aligned_len; wbuf->used += aligned_len; spin_unlock(&wbuf->lock); } goto exit; } written = 0; if (wbuf->used) { /* * The node is large enough and does not fit entirely within * current available space. We have to fill and flush * write-buffer and switch to the next max. write unit. */ dbg_io("flush jhead %s wbuf to LEB %d:%d", dbg_jhead(wbuf->jhead), wbuf->lnum, wbuf->offs); memcpy(wbuf->buf + wbuf->used, buf, wbuf->avail); err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs, wbuf->size, wbuf->dtype); if (err) goto out; wbuf->offs += wbuf->size; len -= wbuf->avail; aligned_len -= wbuf->avail; written += wbuf->avail; } else if (wbuf->offs & (c->max_write_size - 1)) { /* * The write-buffer offset is not aligned to * @c->max_write_size and @wbuf->size is less than * @c->max_write_size. Write @wbuf->size bytes to make sure the * following writes are done in optimal @c->max_write_size * chunks. */ dbg_io("write %d bytes to LEB %d:%d", wbuf->size, wbuf->lnum, wbuf->offs); err = ubi_leb_write(c->ubi, wbuf->lnum, buf, wbuf->offs, wbuf->size, wbuf->dtype); if (err) goto out; wbuf->offs += wbuf->size; len -= wbuf->size; aligned_len -= wbuf->size; written += wbuf->size; } /* * The remaining data may take more whole max. write units, so write the * remains multiple to max. write unit size directly to the flash media. * We align node length to 8-byte boundary because we anyway flash wbuf * if the remaining space is less than 8 bytes. */ n = aligned_len >> c->max_write_shift; if (n) { n <<= c->max_write_shift; dbg_io("write %d bytes to LEB %d:%d", n, wbuf->lnum, wbuf->offs); err = ubi_leb_write(c->ubi, wbuf->lnum, buf + written, wbuf->offs, n, wbuf->dtype); if (err) goto out; wbuf->offs += n; aligned_len -= n; len -= n; written += n; } spin_lock(&wbuf->lock); if (aligned_len) /* * And now we have what's left and what does not take whole * max. write unit, so write it to the write-buffer and we are * done. */ memcpy(wbuf->buf, buf + written, len); if (c->leb_size - wbuf->offs >= c->max_write_size) wbuf->size = c->max_write_size; else wbuf->size = c->leb_size - wbuf->offs; wbuf->avail = wbuf->size - aligned_len; wbuf->used = aligned_len; wbuf->next_ino = 0; spin_unlock(&wbuf->lock); exit: if (wbuf->sync_callback) { int free = c->leb_size - wbuf->offs - wbuf->used; err = wbuf->sync_callback(c, wbuf->lnum, free, 0); if (err) goto out; } if (wbuf->used) new_wbuf_timer_nolock(wbuf); return 0; out: ubifs_err("cannot write %d bytes to LEB %d:%d, error %d", len, wbuf->lnum, wbuf->offs, err); dbg_dump_node(c, buf); dbg_dump_stack(); dbg_dump_leb(c, wbuf->lnum); return err; }
/** * ubifs_wbuf_sync_nolock - synchronize write-buffer. * @wbuf: write-buffer to synchronize * * This function synchronizes write-buffer @buf and returns zero in case of * success or a negative error code in case of failure. * * Note, although write-buffers are of @c->max_write_size, this function does * not necessarily writes all @c->max_write_size bytes to the flash. Instead, * if the write-buffer is only partially filled with data, only the used part * of the write-buffer (aligned on @c->min_io_size boundary) is synchronized. * This way we waste less space. */ int ubifs_wbuf_sync_nolock(struct ubifs_wbuf *wbuf) { struct ubifs_info *c = wbuf->c; int err, dirt, sync_len; cancel_wbuf_timer_nolock(wbuf); if (!wbuf->used || wbuf->lnum == -1) /* Write-buffer is empty or not seeked */ return 0; dbg_io("LEB %d:%d, %d bytes, jhead %s", wbuf->lnum, wbuf->offs, wbuf->used, dbg_jhead(wbuf->jhead)); ubifs_assert(!(wbuf->avail & 7)); ubifs_assert(wbuf->offs + wbuf->size <= c->leb_size); ubifs_assert(wbuf->size >= c->min_io_size); ubifs_assert(wbuf->size <= c->max_write_size); ubifs_assert(wbuf->size % c->min_io_size == 0); ubifs_assert(!c->ro_media && !c->ro_mount); if (c->leb_size - wbuf->offs >= c->max_write_size) ubifs_assert(!((wbuf->offs + wbuf->size) % c->max_write_size)); if (c->ro_error) return -EROFS; /* * Do not write whole write buffer but write only the minimum necessary * amount of min. I/O units. */ sync_len = ALIGN(wbuf->used, c->min_io_size); dirt = sync_len - wbuf->used; if (dirt) ubifs_pad(c, wbuf->buf + wbuf->used, dirt); err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs, sync_len, wbuf->dtype); if (err) { ubifs_err("cannot write %d bytes to LEB %d:%d", sync_len, wbuf->lnum, wbuf->offs); dbg_dump_stack(); return err; } spin_lock(&wbuf->lock); wbuf->offs += sync_len; /* * Now @wbuf->offs is not necessarily aligned to @c->max_write_size. * But our goal is to optimize writes and make sure we write in * @c->max_write_size chunks and to @c->max_write_size-aligned offset. * Thus, if @wbuf->offs is not aligned to @c->max_write_size now, make * sure that @wbuf->offs + @wbuf->size is aligned to * @c->max_write_size. This way we make sure that after next * write-buffer flush we are again at the optimal offset (aligned to * @c->max_write_size). */ if (c->leb_size - wbuf->offs < c->max_write_size) wbuf->size = c->leb_size - wbuf->offs; else if (wbuf->offs & (c->max_write_size - 1)) wbuf->size = ALIGN(wbuf->offs, c->max_write_size) - wbuf->offs; else wbuf->size = c->max_write_size; wbuf->avail = wbuf->size; wbuf->used = 0; wbuf->next_ino = 0; spin_unlock(&wbuf->lock); if (wbuf->sync_callback) err = wbuf->sync_callback(c, wbuf->lnum, c->leb_size - wbuf->offs, dirt); return err; }