/**
* bi_udc_exit - Stop using the USB Device Controller
*
* Stop using the USB Device Controller.
*
* Shutdown and free dma channels, de-register the interrupt handler.
*/
void bi_udc_exit(void)
{
int i;
dbg_init(1, "Unloading %s", udc_name());
for (i = 0; i < udc_max_endpoints(); i++) {
udc_disable_ep(i);
}
// free io and irq
udc_disconnect();
udc_disable();
udc_release_io();
udc_release_udc_irq();
if (have_cable_irq) {
udc_release_cable_irq();
}
}
/**
* bi_udc_init - initialize USB Device Controller
*
* Get ready to use the USB Device Controller.
*
* Register an interrupt handler and IO region. Return non-zero for error.
*/
int bi_udc_init (void)
{
dbg_init (1, "Loading %s", udc_name ());
bi_driver.name = udc_name ();
bi_driver.max_endpoints = udc_max_endpoints ();
bi_driver.maxpacketsize = udc_ep0_packetsize ();
dbg_init (1, "name: %s endpoints: %d ep0: %d", bi_driver.name, bi_driver.max_endpoints,
bi_driver.maxpacketsize);
// request device IRQ
if (udc_request_udc_irq ()) {
dbg_init (0, "name: %s request udc irq failed", udc_name ());
return -EINVAL;
}
// request device IO
if (udc_request_io ()) {
udc_release_udc_irq ();
dbg_init (0, "name: %s request udc io failed", udc_name ());
return -EINVAL;
}
// probe for device
if (udc_init ()) {
udc_release_udc_irq ();
udc_release_io ();
dbg_init (1, "name: %s probe failed", udc_name ());
return -EINVAL;
}
// optional cable IRQ
have_cable_irq = !udc_request_cable_irq ();
dbg_init (1, "name: %s request cable irq %d", udc_name (), have_cable_irq);
return 0;
}
/**
* bi_device_event - handle generic bus event
* @device: device pointer
* @event: interrupt event
*
* Called by usb core layer to inform bus of an event.
*/
int bi_device_event (struct usb_device_instance *device, usb_device_event_t event, int data)
{
//printk(KERN_DEBUG "bi_device_event: event: %d\n", event);
if (!device) {
return 0;
}
dbg_usbe (1,"%s", USBD_DEVICE_EVENTS(event));
switch (event) {
case DEVICE_UNKNOWN:
break;
case DEVICE_INIT:
break;
case DEVICE_CREATE: // XXX should this stuff be in DEVICE_INIT?
// enable upstream port
//ep0_enable(device);
// for net_create
bi_config (device);
// enable udc, enable interrupts, enable connect
printk(KERN_INFO"bi_device_event: call udc_enable\n");
udc_enable (device);
printk(KERN_INFO"bi_device_event: call udc_all_interrupts\n");
// XXX verify
udc_suspended_interrupts (device);
//udc_all_interrupts (device);
dbg_usbe (1, "CREATE done");
break;
case DEVICE_HUB_CONFIGURED:
udc_connect ();
break;
case DEVICE_RESET:
device->address = 0;
udc_set_address (device->address);
udc_reset_ep (0);
// XXX verify
udc_suspended_interrupts (device);
dbg_usbe (1, "DEVICE RESET done: %d", device->address);
break;
case DEVICE_ADDRESS_ASSIGNED:
udc_set_address (device->address);
device->status = USBD_OK;
// XXX verify
udc_all_interrupts (device); // XXX
break;
case DEVICE_CONFIGURED:
device->status = USBD_OK;
bi_config (device);
break;
case DEVICE_DE_CONFIGURED:
{
int ep;
for (ep = 1; ep < udc_max_endpoints (); ep++)
udc_reset_ep (ep);
}
break;
case DEVICE_SET_INTERFACE:
bi_config (device);
break;
case DEVICE_SET_FEATURE:
break;
case DEVICE_CLEAR_FEATURE:
break;
case DEVICE_BUS_INACTIVE:
// disable suspend interrupt
udc_suspended_interrupts (device);
// XXX check on linkup and sl11
// if we are no longer connected then force a reset
if (!udc_connected ()) {
usbd_device_event_irq (device, DEVICE_RESET, 0);
}
break;
case DEVICE_BUS_ACTIVITY:
// enable suspend interrupt
udc_all_interrupts (device);
break;
case DEVICE_POWER_INTERRUPTION:
break;
case DEVICE_HUB_RESET:
break;
case DEVICE_DESTROY:
udc_disconnect ();
bi_disable_endpoints (device);
udc_disable_interrupts (device);
udc_disable ();
break;
case DEVICE_FUNCTION_PRIVATE:
break;
}
return 0;
}
