uint16_t uip_tcpcallback(struct uip_driver_s *dev, struct uip_conn *conn,
uint16_t flags)
{
/* Preserve the UIP_ACKDATA, UIP_CLOSE, and UIP_ABORT in the response.
* These is needed by uIP to handle responses and buffer state. The
* UIP_NEWDATA indication will trigger the ACK response, but must be
* explicitly set in the callback.
*/
nllvdbg("flags: %04x\n", flags);
/* Perform the data callback. When a data callback is executed from 'list',
* the input flags are normally returned, however, the implementation
* may set one of the following:
*
* UIP_CLOSE - Gracefully close the current connection
* UIP_ABORT - Abort (reset) the current connection on an error that
* prevents UIP_CLOSE from working.
*
* And/Or set/clear the following:
*
* UIP_NEWDATA - May be cleared to indicate that the data was consumed
* and that no further process of the new data should be
* attempted.
* UIP_SNDACK - If UIP_NEWDATA is cleared, then UIP_SNDACK may be set
* to indicate that an ACK should be included in the response.
* (In UIP_NEWDATA is cleared bu UIP_SNDACK is not set, then
* dev->d_len should also be cleared).
*/
flags = uip_callbackexecute(dev, conn, flags, conn->list);
/* There may be no new data handler in place at them moment that the new
* incoming data is received. If the new incoming data was not handled, then
* either (1) put the unhandled incoming data in the read-ahead buffer (if
* enabled) or (2) suppress the ACK to the data in the hope that it will
* be re-transmitted at a better time.
*/
if ((flags & UIP_NEWDATA) != 0)
{
/* Data was not handled.. dispose of it appropriately */
flags = uip_dataevent(dev, conn, flags);
}
/* Check if there is a connection-related event and a connection
* callback.
*/
if (((flags & UIP_CONN_EVENTS) != 0) && conn->connection_event)
{
/* Perform the callback */
conn->connection_event(conn, flags);
}
return flags;
}
void uip_udpcallback(struct uip_driver_s *dev, struct uip_udp_conn *conn,
uint16_t flags)
{
nllvdbg("flags: %04x\n", flags);
/* Some sanity checking */
if (conn)
{
/* Perform the callback */
flags = uip_callbackexecute(dev, conn, flags, conn->list);
}
}
void uip_icmpinput(struct uip_driver_s *dev)
{
struct uip_icmpip_hdr *picmp = ICMPBUF;
#ifdef CONFIG_NET_STATISTICS
uip_stat.icmp.recv++;
#endif
#ifndef CONFIG_NET_IPv6
/* ICMPv4 processing code follows. */
/* ICMP echo (i.e., ping) processing. This is simple, we only change the
* ICMP type from ECHO to ECHO_REPLY and adjust the ICMP checksum before
* we return the packet.
*/
if (picmp->type == ICMP_ECHO_REQUEST)
{
/* If we are configured to use ping IP address assignment, we use
* the destination IP address of this ping packet and assign it to
* ourself.
*/
#ifdef CONFIG_NET_PINGADDRCONF
if (dev->d_ipaddr == 0)
{
dev->d_ipaddr = picmp->destipaddr;
}
#endif
/* Change the ICMP type */
picmp->type = ICMP_ECHO_REPLY;
/* Swap IP addresses. */
uiphdr_ipaddr_copy(picmp->destipaddr, picmp->srcipaddr);
uiphdr_ipaddr_copy(picmp->srcipaddr, &dev->d_ipaddr);
/* Recalculate the ICMP checksum */
#if 0
/* The slow way... sum over the ICMP message */
picmp->icmpchksum = 0;
picmp->icmpchksum = ~uip_icmpchksum(dev, (((uint16_t)picmp->len[0] << 8) | (uint16_t)picmp->len[1]) - UIP_IPH_LEN);
if (picmp->icmpchksum == 0)
{
picmp->icmpchksum = 0xffff;
}
#else
/* The quick way -- Since only the type has changed, just adjust the
* checksum for the change of type
*/
if (picmp->icmpchksum >= HTONS(0xffff - (ICMP_ECHO_REQUEST << 8)))
{
picmp->icmpchksum += HTONS(ICMP_ECHO_REQUEST << 8) + 1;
}
else
{
picmp->icmpchksum += HTONS(ICMP_ECHO_REQUEST << 8);
}
#endif
nllvdbg("Outgoing ICMP packet length: %d (%d)\n",
dev->d_len, (picmp->len[0] << 8) | picmp->len[1]);
#ifdef CONFIG_NET_STATISTICS
uip_stat.icmp.sent++;
uip_stat.ip.sent++;
#endif
}
/* If an ICMP echo reply is received then there should also be
* a thread waiting to received the echo response.
*/
#ifdef CONFIG_NET_ICMP_PING
else if (picmp->type == ICMP_ECHO_REPLY && g_echocallback)
{
(void)uip_callbackexecute(dev, picmp, UIP_ECHOREPLY, g_echocallback);
}
#endif
/* Otherwise the ICMP input was not processed */
else
{
nlldbg("Unknown ICMP cmd: %d\n", picmp->type);
goto typeerr;
}
return;
typeerr:
#ifdef CONFIG_NET_STATISTICS
uip_stat.icmp.typeerr++;
uip_stat.icmp.drop++;
#endif
dev->d_len = 0;
#else /* !CONFIG_NET_IPv6 */
/* If we get a neighbor solicitation for our address we should send
* a neighbor advertisement message back.
*/
if (picmp->type == ICMP6_NEIGHBOR_SOLICITATION)
{
if (uip_ipaddr_cmp(picmp->icmp6data, dev->d_ipaddr))
{
if (picmp->options[0] == ICMP6_OPTION_SOURCE_LINK_ADDRESS)
{
/* Save the sender's address in our neighbor list. */
uiphdr_neighbor_add(picmp->srcipaddr, &(picmp->options[2]));
}
/* We should now send a neighbor advertisement back to where the
* neighbor solicitation came from.
*/
picmp->type = ICMP6_NEIGHBOR_ADVERTISEMENT;
picmp->flags = ICMP6_FLAG_S; /* Solicited flag. */
picmp->reserved1 = picmp->reserved2 = picmp->reserved3 = 0;
uiphdr_ipaddr_copy(picmp->destipaddr, picmp->srcipaddr);
uiphdr_ipaddr_copy(picmp->srcipaddr, &dev->d_ipaddr);
picmp->options[0] = ICMP6_OPTION_TARGET_LINK_ADDRESS;
picmp->options[1] = 1; /* Options length, 1 = 8 bytes. */
memcpy(&(picmp->options[2]), &dev->d_mac, IFHWADDRLEN);
picmp->icmpchksum = 0;
picmp->icmpchksum = ~uip_icmp6chksum(dev);
}
else
{
goto drop;
}
}
else if (picmp->type == ICMP6_ECHO_REQUEST)
{
/* ICMP echo (i.e., ping) processing. This is simple, we only
* change the ICMP type from ECHO to ECHO_REPLY and update the
* ICMP checksum before we return the packet.
*/
picmp->type = ICMP6_ECHO_REPLY;
uiphdr_ipaddr_copy(picmp->destipaddr, picmp->srcipaddr);
uiphdr_ipaddr_copy(picmp->srcipaddr, &dev->d_ipaddr);
picmp->icmpchksum = 0;
picmp->icmpchksum = ~uip_icmp6chksum(dev);
}
/* If an ICMP echo reply is received then there should also be
* a thread waiting to received the echo response.
*/
#ifdef CONFIG_NET_ICMP_PING
else if (picmp->type == ICMP6_ECHO_REPLY && g_echocallback)
{
uint16_t flags = UIP_ECHOREPLY;
if (g_echocallback)
{
/* Dispatch the ECHO reply to the waiting thread */
flags = uip_callbackexecute(dev, picmp, flags, g_echocallback);
}
/* If the ECHO reply was not handled, then drop the packet */
if (flags == UIP_ECHOREPLY)
{
/* The ECHO reply was not handled */
goto drop;
}
}
#endif
else
{
nlldbg("Unknown ICMP6 cmd: %d\n", picmp->type);
goto typeerr;
}
nllvdbg("Outgoing ICMP6 packet length: %d (%d)\n",
dev->d_len, (picmp->len[0] << 8) | picmp->len[1]);
#ifdef CONFIG_NET_STATISTICS
uip_stat.icmp.sent++;
uip_stat.ip.sent++;
#endif
return;
typeerr:
#ifdef CONFIG_NET_STATISTICS
uip_stat.icmp.typeerr++;
#endif
drop:
#ifdef CONFIG_NET_STATISTICS
uip_stat.icmp.drop++;
#endif
dev->d_len = 0;
#endif /* !CONFIG_NET_IPv6 */
}
