void SIM_PLOT_FRAME::onSettings( wxCommandEvent& event ) { SIM_PLOT_PANEL* plotPanel = CurrentPlot(); // Initial processing is required to e.g. display a list of power sources updateNetlistExporter(); if( !m_exporter->ProcessNetlist( NET_ALL_FLAGS ) ) { DisplayError( this, _( "There were errors during netlist export, aborted." ) ); return; } if( !m_settingsDlg ) m_settingsDlg = new DIALOG_SIM_SETTINGS( this ); if( plotPanel ) m_settingsDlg->SetSimCommand( m_plots[plotPanel].m_simCommand ); m_settingsDlg->SetNetlistExporter( m_exporter.get() ); if( m_settingsDlg->ShowModal() == wxID_OK ) { wxString newCommand = m_settingsDlg->GetSimCommand(); SIM_TYPE newSimType = NETLIST_EXPORTER_PSPICE_SIM::CommandToSimType( newCommand ); // If it is a new simulation type, open a new plot if( !plotPanel || ( plotPanel && plotPanel->GetType() != newSimType ) ) { plotPanel = NewPlotPanel( newSimType ); } m_plots[plotPanel].m_simCommand = newCommand; } }
void SIM_PLOT_FRAME::StartSimulation() { STRING_FORMATTER formatter; SIM_PLOT_PANEL* plotPanel = CurrentPlot(); if( !m_settingsDlg ) m_settingsDlg = new DIALOG_SIM_SETTINGS( this ); m_simConsole->Clear(); updateNetlistExporter(); if( plotPanel ) m_exporter->SetSimCommand( m_plots[plotPanel].m_simCommand ); if( !m_exporter->Format( &formatter, m_settingsDlg->GetNetlistOptions() ) ) { DisplayError( this, _( "There were errors during netlist export, aborted." ) ); return; } if( m_exporter->GetSimType() == ST_UNKNOWN ) { DisplayInfoMessage( this, _( "You need to select the simulation settings first." ) ); return; } m_simulator->LoadNetlist( formatter.GetString() ); updateTuners(); applyTuners(); m_simulator->Run(); }
SIM_PLOT_FRAME::SIM_PLOT_FRAME( KIWAY* aKiway, wxWindow* aParent ) : SIM_PLOT_FRAME_BASE( aParent ), m_lastSimPlot( nullptr ) { SetKiway( this, aKiway ); m_signalsIconColorList = NULL; m_schematicFrame = (SCH_EDIT_FRAME*) Kiway().Player( FRAME_SCH, false ); if( m_schematicFrame == NULL ) throw std::runtime_error( "There is no schematic window" ); // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( simulator_xpm ) ); SetIcon( icon ); m_simulator = SPICE_SIMULATOR::CreateInstance( "ngspice" ); if( !m_simulator ) { throw std::runtime_error( "Could not create simulator instance" ); return; } m_simulator->Init(); m_reporter = new SIM_THREAD_REPORTER( this ); m_simulator->SetReporter( m_reporter ); updateNetlistExporter(); Connect( wxEVT_CLOSE_WINDOW, wxCloseEventHandler( SIM_PLOT_FRAME::onClose ), NULL, this ); Connect( EVT_SIM_UPDATE, wxCommandEventHandler( SIM_PLOT_FRAME::onSimUpdate ), NULL, this ); Connect( EVT_SIM_REPORT, wxCommandEventHandler( SIM_PLOT_FRAME::onSimReport ), NULL, this ); Connect( EVT_SIM_STARTED, wxCommandEventHandler( SIM_PLOT_FRAME::onSimStarted ), NULL, this ); Connect( EVT_SIM_FINISHED, wxCommandEventHandler( SIM_PLOT_FRAME::onSimFinished ), NULL, this ); Connect( EVT_SIM_CURSOR_UPDATE, wxCommandEventHandler( SIM_PLOT_FRAME::onCursorUpdate ), NULL, this ); // Toolbar buttons m_toolSimulate = m_toolBar->AddTool( ID_SIM_RUN, _( "Run/Stop Simulation" ), KiBitmap( sim_run_xpm ), _( "Run Simulation" ), wxITEM_NORMAL ); m_toolAddSignals = m_toolBar->AddTool( ID_SIM_ADD_SIGNALS, _( "Add Signals" ), KiBitmap( sim_add_signal_xpm ), _( "Add signals to plot" ), wxITEM_NORMAL ); m_toolProbe = m_toolBar->AddTool( ID_SIM_PROBE, _( "Probe" ), KiBitmap( sim_probe_xpm ), _( "Probe signals on the schematic" ), wxITEM_NORMAL ); m_toolTune = m_toolBar->AddTool( ID_SIM_TUNE, _( "Tune" ), KiBitmap( sim_tune_xpm ), _( "Tune component values" ), wxITEM_NORMAL ); m_toolSettings = m_toolBar->AddTool( wxID_ANY, _( "Settings" ), KiBitmap( sim_settings_xpm ), _( "Simulation settings" ), wxITEM_NORMAL ); Connect( m_toolSimulate->GetId(), wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler( SIM_PLOT_FRAME::onSimulate ), NULL, this ); Connect( m_toolAddSignals->GetId(), wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler( SIM_PLOT_FRAME::onAddSignal ), NULL, this ); Connect( m_toolProbe->GetId(), wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler( SIM_PLOT_FRAME::onProbe ), NULL, this ); Connect( m_toolTune->GetId(), wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler( SIM_PLOT_FRAME::onTune ), NULL, this ); Connect( m_toolSettings->GetId(), wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler( SIM_PLOT_FRAME::onSettings ), NULL, this ); // Bind toolbar buttons event to existing menu event handlers, so they behave the same Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onSimulate, this, m_runSimulation->GetId() ); Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onAddSignal, this, m_addSignals->GetId() ); Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onProbe, this, m_probeSignals->GetId() ); Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onTune, this, m_tuneValue->GetId() ); Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onSettings, this, m_settings->GetId() ); m_toolBar->Realize(); m_plotNotebook->SetPageText( 0, _( "Welcome!" ) ); // the settings dialog will be created later, on demand. // if created in the ctor, for some obscure reason, there is an issue // on Windows: when open it, the simulator frame is sent to the background. // instead of beeing behind the dialog frame (as it does) m_settingsDlg = NULL; }
SIM_PLOT_FRAME::SIM_PLOT_FRAME( KIWAY* aKiway, wxWindow* aParent ) : SIM_PLOT_FRAME_BASE( aParent ), m_lastSimPlot( nullptr ) { SetKiway( this, aKiway ); m_signalsIconColorList = NULL; m_schematicFrame = (SCH_EDIT_FRAME*) Kiway().Player( FRAME_SCH, false ); if( m_schematicFrame == NULL ) throw std::runtime_error( "There is no schematic window" ); // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( simulator_xpm ) ); SetIcon( icon ); // Gives a minimal size SetSizeHints( 500, 400, -1, -1, -1, -1 ); // Get the previous size and position of windows: LoadSettings( config() ); m_simulator = SPICE_SIMULATOR::CreateInstance( "ngspice" ); if( !m_simulator ) { throw std::runtime_error( "Could not create simulator instance" ); return; } m_simulator->Init(); if( m_savedWorkbooksPath.IsEmpty() ) { m_savedWorkbooksPath = Prj().GetProjectPath(); } m_reporter = new SIM_THREAD_REPORTER( this ); m_simulator->SetReporter( m_reporter ); updateNetlistExporter(); Connect( wxEVT_CLOSE_WINDOW, wxCloseEventHandler( SIM_PLOT_FRAME::onClose ), NULL, this ); Connect( EVT_SIM_UPDATE, wxCommandEventHandler( SIM_PLOT_FRAME::onSimUpdate ), NULL, this ); Connect( EVT_SIM_REPORT, wxCommandEventHandler( SIM_PLOT_FRAME::onSimReport ), NULL, this ); Connect( EVT_SIM_STARTED, wxCommandEventHandler( SIM_PLOT_FRAME::onSimStarted ), NULL, this ); Connect( EVT_SIM_FINISHED, wxCommandEventHandler( SIM_PLOT_FRAME::onSimFinished ), NULL, this ); Connect( EVT_SIM_CURSOR_UPDATE, wxCommandEventHandler( SIM_PLOT_FRAME::onCursorUpdate ), NULL, this ); // Toolbar buttons m_toolSimulate = m_toolBar->AddTool( ID_SIM_RUN, _( "Run/Stop Simulation" ), KiBitmap( sim_run_xpm ), _( "Run Simulation" ), wxITEM_NORMAL ); m_toolAddSignals = m_toolBar->AddTool( ID_SIM_ADD_SIGNALS, _( "Add Signals" ), KiBitmap( sim_add_signal_xpm ), _( "Add signals to plot" ), wxITEM_NORMAL ); m_toolProbe = m_toolBar->AddTool( ID_SIM_PROBE, _( "Probe" ), KiBitmap( sim_probe_xpm ), _( "Probe signals on the schematic" ), wxITEM_NORMAL ); m_toolTune = m_toolBar->AddTool( ID_SIM_TUNE, _( "Tune" ), KiBitmap( sim_tune_xpm ), _( "Tune component values" ), wxITEM_NORMAL ); m_toolSettings = m_toolBar->AddTool( wxID_ANY, _( "Settings" ), KiBitmap( sim_settings_xpm ), _( "Simulation settings" ), wxITEM_NORMAL ); Connect( m_toolSimulate->GetId(), wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler( SIM_PLOT_FRAME::onSimulate ), NULL, this ); Connect( m_toolAddSignals->GetId(), wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler( SIM_PLOT_FRAME::onAddSignal ), NULL, this ); Connect( m_toolProbe->GetId(), wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler( SIM_PLOT_FRAME::onProbe ), NULL, this ); Connect( m_toolTune->GetId(), wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler( SIM_PLOT_FRAME::onTune ), NULL, this ); Connect( m_toolSettings->GetId(), wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler( SIM_PLOT_FRAME::onSettings ), NULL, this ); // Bind toolbar buttons event to existing menu event handlers, so they behave the same Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onSimulate, this, m_runSimulation->GetId() ); Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onAddSignal, this, m_addSignals->GetId() ); Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onProbe, this, m_probeSignals->GetId() ); Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onTune, this, m_tuneValue->GetId() ); Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onShowNetlist, this, m_showNetlist->GetId() ); Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onSettings, this, m_settings->GetId() ); m_toolBar->Realize(); m_plotNotebook->SetPageText( 0, _( "Welcome!" ) ); // the settings dialog will be created later, on demand. // if created in the ctor, for some obscure reason, there is an issue // on Windows: when open it, the simulator frame is sent to the background. // instead of being behind the dialog frame (as it does) m_settingsDlg = NULL; // resize the subwindows size. At least on Windows, calling wxSafeYield before // resizing the subwindows forces the wxSplitWindows size events automatically generated // by wxWidgets to be executed before our resize code. // Otherwise, the changes made by setSubWindowsSashSize are overwritten by one these // events wxSafeYield(); setSubWindowsSashSize(); }