// -------------------------------------
void
CalendarLimitTest::test(UDate millis, icu::Calendar* cal, icu::DateFormat* fmt)
{
static const UDate kDrift = 1e-10;
UErrorCode exception = U_ZERO_ERROR;
UnicodeString theDate;
UErrorCode status = U_ZERO_ERROR;
cal->setTime(millis, exception);
if (U_SUCCESS(exception)) {
fmt->format(millis, theDate);
UDate dt = fmt->parse(theDate, status);
// allow a small amount of error (drift)
if(! withinErr(dt, millis, kDrift)) {
errln("FAIL:round trip for large milli, got: %.1lf wanted: %.1lf. (delta %.2lf greater than %.2lf)",
dt, millis, uprv_fabs(millis-dt), uprv_fabs(dt*kDrift));
logln(UnicodeString(" ") + theDate + " " + CalendarTest::calToStr(*cal));
} else {
logln(UnicodeString("OK: got ") + dt + ", wanted " + millis);
logln(UnicodeString(" ") + theDate);
}
}
}
double
NumberFormatRoundTripTest::proportionalError(const Formattable& a, const Formattable& b)
{
double aa,bb;
if(isDouble(a))
aa = a.getDouble();
else
aa = a.getLong();
if(isDouble(b))
bb = b.getDouble();
else
bb = b.getLong();
double error = aa - bb;
if(aa != 0 && bb != 0)
error /= aa;
return uprv_fabs(error);
}
void AstroTest::TestSunriseTimes(void) {
UErrorCode status = U_ZERO_ERROR;
initAstro(status);
ASSERT_OK(status);
// logln("Sunrise/Sunset times for San Jose, California, USA");
// CalendarAstronomer *astro2 = new CalendarAstronomer(-121.55, 37.20);
// TimeZone *tz = TimeZone::createTimeZone("America/Los_Angeles");
// We'll use a table generated by the UNSO website as our reference
// From: http://aa.usno.navy.mil/
//-Location: W079 25, N43 40
//-Rise and Set for the Sun for 2001
//-Zone: 4h West of Greenwich
int32_t USNO[] = {
6,59, 19,45,
6,57, 19,46,
6,56, 19,47,
6,54, 19,48,
6,52, 19,49,
6,50, 19,51,
6,48, 19,52,
6,47, 19,53,
6,45, 19,54,
6,43, 19,55,
6,42, 19,57,
6,40, 19,58,
6,38, 19,59,
6,36, 20, 0,
6,35, 20, 1,
6,33, 20, 3,
6,31, 20, 4,
6,30, 20, 5,
6,28, 20, 6,
6,27, 20, 7,
6,25, 20, 8,
6,23, 20,10,
6,22, 20,11,
6,20, 20,12,
6,19, 20,13,
6,17, 20,14,
6,16, 20,16,
6,14, 20,17,
6,13, 20,18,
6,11, 20,19,
};
logln("Sunrise/Sunset times for Toronto, Canada");
// long = 79 25", lat = 43 40"
CalendarAstronomer *astro3 = new CalendarAstronomer(-(79+25/60), 43+40/60);
// As of ICU4J 2.8 the ICU4J time zones implement pass-through
// to the underlying JDK. Because of variation in the
// underlying JDKs, we have to use a fixed-offset
// SimpleTimeZone to get consistent behavior between JDKs.
// The offset we want is [-18000000, 3600000] (raw, dst).
// [aliu 10/15/03]
// TimeZone tz = TimeZone.getTimeZone("America/Montreal");
TimeZone *tz = new SimpleTimeZone(-18000000 + 3600000, "Montreal(FIXED)");
GregorianCalendar *cal = new GregorianCalendar(tz->clone(), Locale::getUS(), status);
GregorianCalendar *cal2 = new GregorianCalendar(tz->clone(), Locale::getUS(), status);
cal->clear();
cal->set(UCAL_YEAR, 2001);
cal->set(UCAL_MONTH, UCAL_APRIL);
cal->set(UCAL_DAY_OF_MONTH, 1);
cal->set(UCAL_HOUR_OF_DAY, 12); // must be near local noon for getSunRiseSet to work
DateFormat *df_t = DateFormat::createTimeInstance(DateFormat::MEDIUM,Locale::getUS());
DateFormat *df_d = DateFormat::createDateInstance(DateFormat::MEDIUM,Locale::getUS());
DateFormat *df_dt = DateFormat::createDateTimeInstance(DateFormat::MEDIUM, DateFormat::MEDIUM, Locale::getUS());
if(!df_t || !df_d || !df_dt) {
dataerrln("couldn't create dateformats.");
return;
}
df_t->adoptTimeZone(tz->clone());
df_d->adoptTimeZone(tz->clone());
df_dt->adoptTimeZone(tz->clone());
for (int32_t i=0; i < 30; i++) {
logln("setDate\n");
astro3->setDate(cal->getTime(status));
logln("getRiseSet(TRUE)\n");
UDate sunrise = astro3->getSunRiseSet(TRUE);
logln("getRiseSet(FALSE)\n");
UDate sunset = astro3->getSunRiseSet(FALSE);
logln("end of getRiseSet\n");
cal2->setTime(cal->getTime(status), status);
cal2->set(UCAL_SECOND, 0);
cal2->set(UCAL_MILLISECOND, 0);
cal2->set(UCAL_HOUR_OF_DAY, USNO[4*i+0]);
cal2->set(UCAL_MINUTE, USNO[4*i+1]);
UDate exprise = cal2->getTime(status);
cal2->set(UCAL_HOUR_OF_DAY, USNO[4*i+2]);
cal2->set(UCAL_MINUTE, USNO[4*i+3]);
UDate expset = cal2->getTime(status);
// Compute delta of what we got to the USNO data, in seconds
int32_t deltarise = (int32_t)uprv_fabs((sunrise - exprise) / 1000);
int32_t deltaset = (int32_t)uprv_fabs((sunset - expset) / 1000);
// Allow a deviation of 0..MAX_DEV seconds
// It would be nice to get down to 60 seconds, but at this
// point that appears to be impossible without a redo of the
// algorithm using something more advanced than Duffett-Smith.
int32_t MAX_DEV = 180;
UnicodeString s1, s2, s3, s4, s5;
if (deltarise > MAX_DEV || deltaset > MAX_DEV) {
if (deltarise > MAX_DEV) {
errln("FAIL: (rise) " + df_d->format(cal->getTime(status),s1) +
", Sunrise: " + df_dt->format(sunrise, s2) +
" (USNO " + df_t->format(exprise,s3) +
" d=" + deltarise + "s)");
} else {
logln(df_d->format(cal->getTime(status),s1) +
", Sunrise: " + df_dt->format(sunrise,s2) +
" (USNO " + df_t->format(exprise,s3) + ")");
}
s1.remove(); s2.remove(); s3.remove(); s4.remove(); s5.remove();
if (deltaset > MAX_DEV) {
errln("FAIL: (set) " + df_d->format(cal->getTime(status),s1) +
", Sunset: " + df_dt->format(sunset,s2) +
" (USNO " + df_t->format(expset,s3) +
" d=" + deltaset + "s)");
} else {
logln(df_d->format(cal->getTime(status),s1) +
", Sunset: " + df_dt->format(sunset,s2) +
" (USNO " + df_t->format(expset,s3) + ")");
}
} else {
logln(df_d->format(cal->getTime(status),s1) +
", Sunrise: " + df_dt->format(sunrise,s2) +
" (USNO " + df_t->format(exprise,s3) + ")" +
", Sunset: " + df_dt->format(sunset,s4) +
" (USNO " + df_t->format(expset,s5) + ")");
}
cal->add(UCAL_DATE, 1, status);
}
// CalendarAstronomer a = new CalendarAstronomer(-(71+5/60), 42+37/60);
// cal.clear();
// cal.set(cal.YEAR, 1986);
// cal.set(cal.MONTH, cal.MARCH);
// cal.set(cal.DATE, 10);
// cal.set(cal.YEAR, 1988);
// cal.set(cal.MONTH, cal.JULY);
// cal.set(cal.DATE, 27);
// a.setDate(cal.getTime());
// long r = a.getSunRiseSet2(true);
delete astro3;
delete tz;
delete cal;
delete cal2;
delete df_t;
delete df_d;
delete df_dt;
closeAstro(status);
ASSERT_OK(status);
}
UBool
CalendarLimitTest::withinErr(double a, double b, double err)
{
return ( uprv_fabs(a - b) < uprv_fabs(a * err) );
}
static void TestPUtilAPI(void){
double n1=0.0, y1=0.0, expn1, expy1;
double value1 = 0.021;
char *str=0;
UBool isTrue=FALSE;
log_verbose("Testing the API uprv_modf()\n");
y1 = uprv_modf(value1, &n1);
expn1=0;
expy1=0.021;
if(y1 != expy1 || n1 != expn1){
log_err("Error in uprv_modf. Expected IntegralValue=%f, Got=%f, \n Expected FractionalValue=%f, Got=%f\n",
expn1, n1, expy1, y1);
}
if(getTestOption(VERBOSITY_OPTION)){
log_verbose("[float] x = %f n = %f y = %f\n", value1, n1, y1);
}
log_verbose("Testing the API uprv_fmod()\n");
expn1=uprv_fmod(30.50, 15.00);
doAssert(expn1, 0.5, "uprv_fmod(30.50, 15.00) failed.");
log_verbose("Testing the API uprv_ceil()\n");
expn1=uprv_ceil(value1);
doAssert(expn1, 1, "uprv_ceil(0.021) failed.");
log_verbose("Testing the API uprv_floor()\n");
expn1=uprv_floor(value1);
doAssert(expn1, 0, "uprv_floor(0.021) failed.");
log_verbose("Testing the API uprv_fabs()\n");
expn1=uprv_fabs((2.02-1.345));
doAssert(expn1, 0.675, "uprv_fabs(2.02-1.345) failed.");
log_verbose("Testing the API uprv_fmax()\n");
doAssert(uprv_fmax(2.4, 1.2), 2.4, "uprv_fmax(2.4, 1.2) failed.");
log_verbose("Testing the API uprv_fmax() with x value= NaN\n");
expn1=uprv_fmax(uprv_getNaN(), 1.2);
doAssert(expn1, uprv_getNaN(), "uprv_fmax(uprv_getNaN(), 1.2) failed. when one parameter is NaN");
log_verbose("Testing the API uprv_fmin()\n");
doAssert(uprv_fmin(2.4, 1.2), 1.2, "uprv_fmin(2.4, 1.2) failed.");
log_verbose("Testing the API uprv_fmin() with x value= NaN\n");
expn1=uprv_fmin(uprv_getNaN(), 1.2);
doAssert(expn1, uprv_getNaN(), "uprv_fmin(uprv_getNaN(), 1.2) failed. when one parameter is NaN");
log_verbose("Testing the API uprv_max()\n");
doAssert(uprv_max(4, 2), 4, "uprv_max(4, 2) failed.");
log_verbose("Testing the API uprv_min()\n");
doAssert(uprv_min(-4, 2), -4, "uprv_min(-4, 2) failed.");
log_verbose("Testing the API uprv_trunc()\n");
doAssert(uprv_trunc(12.3456), 12, "uprv_trunc(12.3456) failed.");
doAssert(uprv_trunc(12.234E2), 1223, "uprv_trunc(12.234E2) failed.");
doAssert(uprv_trunc(uprv_getNaN()), uprv_getNaN(), "uprv_trunc(uprv_getNaN()) failed. with parameter=NaN");
doAssert(uprv_trunc(uprv_getInfinity()), uprv_getInfinity(), "uprv_trunc(uprv_getInfinity()) failed. with parameter=Infinity");
log_verbose("Testing the API uprv_pow10()\n");
doAssert(uprv_pow10(4), 10000, "uprv_pow10(4) failed.");
log_verbose("Testing the API uprv_isNegativeInfinity()\n");
isTrue=uprv_isNegativeInfinity(uprv_getInfinity() * -1);
if(isTrue != TRUE){
log_err("ERROR: uprv_isNegativeInfinity failed.\n");
}
log_verbose("Testing the API uprv_isPositiveInfinity()\n");
isTrue=uprv_isPositiveInfinity(uprv_getInfinity());
if(isTrue != TRUE){
log_err("ERROR: uprv_isPositiveInfinity failed.\n");
}
log_verbose("Testing the API uprv_isInfinite()\n");
isTrue=uprv_isInfinite(uprv_getInfinity());
if(isTrue != TRUE){
log_err("ERROR: uprv_isInfinite failed.\n");
}
#if 0
log_verbose("Testing the API uprv_digitsAfterDecimal()....\n");
doAssert(uprv_digitsAfterDecimal(value1), 3, "uprv_digitsAfterDecimal() failed.");
doAssert(uprv_digitsAfterDecimal(1.2345E2), 2, "uprv_digitsAfterDecimal(1.2345E2) failed.");
doAssert(uprv_digitsAfterDecimal(1.2345E-2), 6, "uprv_digitsAfterDecimal(1.2345E-2) failed.");
doAssert(uprv_digitsAfterDecimal(1.2345E2), 2, "uprv_digitsAfterDecimal(1.2345E2) failed.");
doAssert(uprv_digitsAfterDecimal(-1.2345E-20), 24, "uprv_digitsAfterDecimal(1.2345E-20) failed.");
doAssert(uprv_digitsAfterDecimal(1.2345E20), 0, "uprv_digitsAfterDecimal(1.2345E20) failed.");
doAssert(uprv_digitsAfterDecimal(-0.021), 3, "uprv_digitsAfterDecimal(-0.021) failed.");
doAssert(uprv_digitsAfterDecimal(23.0), 0, "uprv_digitsAfterDecimal(23.0) failed.");
doAssert(uprv_digitsAfterDecimal(0.022223333321), 9, "uprv_digitsAfterDecimal(0.022223333321) failed.");
#endif
log_verbose("Testing the API u_errorName()...\n");
str=(char*)u_errorName((UErrorCode)0);
if(strcmp(str, "U_ZERO_ERROR") != 0){
log_err("ERROR: u_getVersion() failed. Expected: U_ZERO_ERROR Got=%s\n", str);
}
log_verbose("Testing the API u_errorName()...\n");
str=(char*)u_errorName((UErrorCode)-127);
if(strcmp(str, "U_USING_DEFAULT_WARNING") != 0){
log_err("ERROR: u_getVersion() failed. Expected: U_USING_DEFAULT_WARNING Got=%s\n", str);
}
log_verbose("Testing the API u_errorName().. with BOGUS ERRORCODE...\n");
str=(char*)u_errorName((UErrorCode)200);
if(strcmp(str, "[BOGUS UErrorCode]") != 0){
log_err("ERROR: u_getVersion() failed. Expected: [BOGUS UErrorCode] Got=%s\n", str);
}
{
const char* dataDirectory;
int32_t dataDirectoryLen;
UChar *udataDir=0;
UChar temp[100];
char *charvalue=0;
log_verbose("Testing chars to UChars\n");
/* This cannot really work on a japanese system. u_uastrcpy will have different results than */
/* u_charsToUChars when there is a backslash in the string! */
/*dataDirectory=u_getDataDirectory();*/
dataDirectory="directory1"; /*no backslashes*/
dataDirectoryLen=(int32_t)strlen(dataDirectory);
udataDir=(UChar*)malloc(sizeof(UChar) * (dataDirectoryLen + 1));
u_charsToUChars(dataDirectory, udataDir, (dataDirectoryLen + 1));
u_uastrcpy(temp, dataDirectory);
if(u_strcmp(temp, udataDir) != 0){
log_err("ERROR: u_charsToUChars failed. Expected %s, Got %s\n", austrdup(temp), austrdup(udataDir));
}
log_verbose("Testing UChars to chars\n");
charvalue=(char*)malloc(sizeof(char) * (u_strlen(udataDir) + 1));
u_UCharsToChars(udataDir, charvalue, (u_strlen(udataDir)+1));
if(strcmp(charvalue, dataDirectory) != 0){
log_err("ERROR: u_UCharsToChars failed. Expected %s, Got %s\n", charvalue, dataDirectory);
}
free(charvalue);
free(udataDir);
}
log_verbose("Testing uprv_timezone()....\n");
{
int32_t tzoffset = uprv_timezone();
log_verbose("Value returned from uprv_timezone = %d\n", tzoffset);
if (tzoffset != 28800) {
log_verbose("***** WARNING: If testing in the PST timezone, t_timezone should return 28800! *****");
}
if ((tzoffset % 1800 != 0)) {
log_info("Note: t_timezone offset of %ld (for %s : %s) is not a multiple of 30min.", tzoffset, uprv_tzname(0), uprv_tzname(1));
}
/*tzoffset=uprv_getUTCtime();*/
}
}
virtual double transformNumber(double number) const { return uprv_fabs(number); }
static void TestPUtilAPI(void){
double n1=0.0, y1=0.0, expn1, expy1;
double value1 = 0.021;
UVersionInfo versionArray = {0x01, 0x00, 0x02, 0x02};
char versionString[17]; /* xxx.xxx.xxx.xxx\0 */
char *str=0;
UBool isTrue=FALSE;
log_verbose("Testing the API uprv_modf()\n");
y1 = uprv_modf(value1, &n1);
expn1=0;
expy1=0.021;
if(y1 != expy1 || n1 != expn1){
log_err("Error in uprv_modf. Expected IntegralValue=%f, Got=%f, \n Expected FractionalValue=%f, Got=%f\n",
expn1, n1, expy1, y1);
}
if(VERBOSITY){
log_verbose("[float] x = %f n = %f y = %f\n", value1, n1, y1);
}
log_verbose("Testing the API uprv_fmod()\n");
expn1=uprv_fmod(30.50, 15.00);
doAssert(expn1, 0.5, "uprv_fmod(30.50, 15.00) failed.");
log_verbose("Testing the API uprv_ceil()\n");
expn1=uprv_ceil(value1);
doAssert(expn1, 1, "uprv_ceil(0.021) failed.");
log_verbose("Testing the API uprv_floor()\n");
expn1=uprv_floor(value1);
doAssert(expn1, 0, "uprv_floor(0.021) failed.");
log_verbose("Testing the API uprv_fabs()\n");
expn1=uprv_fabs((2.02-1.345));
doAssert(expn1, 0.675, "uprv_fabs(2.02-1.345) failed.");
log_verbose("Testing the API uprv_fmax()\n");
doAssert(uprv_fmax(2.4, 1.2), 2.4, "uprv_fmax(2.4, 1.2) failed.");
log_verbose("Testing the API uprv_fmax() with x value= NaN\n");
expn1=uprv_fmax(uprv_getNaN(), 1.2);
doAssert(expn1, uprv_getNaN(), "uprv_fmax(uprv_getNaN(), 1.2) failed. when one parameter is NaN");
log_verbose("Testing the API uprv_fmin()\n");
doAssert(uprv_fmin(2.4, 1.2), 1.2, "uprv_fmin(2.4, 1.2) failed.");
log_verbose("Testing the API uprv_fmin() with x value= NaN\n");
expn1=uprv_fmin(uprv_getNaN(), 1.2);
doAssert(expn1, uprv_getNaN(), "uprv_fmin(uprv_getNaN(), 1.2) failed. when one parameter is NaN");
log_verbose("Testing the API uprv_max()\n");
doAssert(uprv_max(4, 2), 4, "uprv_max(4, 2) failed.");
log_verbose("Testing the API uprv_min()\n");
doAssert(uprv_min(-4, 2), -4, "uprv_min(-4, 2) failed.");
log_verbose("Testing the API uprv_trunc()\n");
doAssert(uprv_trunc(12.3456), 12, "uprv_trunc(12.3456) failed.");
doAssert(uprv_trunc(12.234E2), 1223, "uprv_trunc(12.234E2) failed.");
doAssert(uprv_trunc(uprv_getNaN()), uprv_getNaN(), "uprv_trunc(uprv_getNaN()) failed. with parameter=NaN");
doAssert(uprv_trunc(uprv_getInfinity()), uprv_getInfinity(), "uprv_trunc(uprv_getInfinity()) failed. with parameter=Infinity");
log_verbose("Testing the API uprv_pow10()\n");
doAssert(uprv_pow10(4), 10000, "uprv_pow10(4) failed.");
log_verbose("Testing the API uprv_log10()\n");
doAssert(uprv_log10(3456), 3, "uprv_log10(3456) failed.");
#ifdef OS390
doAssert(uprv_log10(1.0e55), 55, "uprv_log10(1.0e55) failed.");
#else
doAssert(uprv_log10(1.0e300), 300, "uprv_log10(1.0e300) failed.");
#endif
log_verbose("Testing the API uprv_isNegativeInfinity()\n");
isTrue=uprv_isNegativeInfinity(uprv_getInfinity() * -1);
if(isTrue != TRUE){
log_err("ERROR: uprv_isNegativeInfinity failed.\n");
}
log_verbose("Testing the API uprv_isPositiveInfinity()\n");
isTrue=uprv_isPositiveInfinity(uprv_getInfinity());
if(isTrue != TRUE){
log_err("ERROR: uprv_isPositiveInfinity failed.\n");
}
log_verbose("Testing the API uprv_isInfinite()\n");
isTrue=uprv_isInfinite(uprv_getInfinity());
if(isTrue != TRUE){
log_err("ERROR: uprv_isInfinite failed.\n");
}
#if 0
log_verbose("Testing the API uprv_digitsAfterDecimal()....\n");
doAssert(uprv_digitsAfterDecimal(value1), 3, "uprv_digitsAfterDecimal() failed.");
doAssert(uprv_digitsAfterDecimal(1.2345E2), 2, "uprv_digitsAfterDecimal(1.2345E2) failed.");
doAssert(uprv_digitsAfterDecimal(1.2345E-2), 6, "uprv_digitsAfterDecimal(1.2345E-2) failed.");
doAssert(uprv_digitsAfterDecimal(1.2345E2), 2, "uprv_digitsAfterDecimal(1.2345E2) failed.");
doAssert(uprv_digitsAfterDecimal(-1.2345E-20), 24, "uprv_digitsAfterDecimal(1.2345E-20) failed.");
doAssert(uprv_digitsAfterDecimal(1.2345E20), 0, "uprv_digitsAfterDecimal(1.2345E20) failed.");
doAssert(uprv_digitsAfterDecimal(-0.021), 3, "uprv_digitsAfterDecimal(-0.021) failed.");
doAssert(uprv_digitsAfterDecimal(23.0), 0, "uprv_digitsAfterDecimal(23.0) failed.");
doAssert(uprv_digitsAfterDecimal(0.022223333321), 9, "uprv_digitsAfterDecimal(0.022223333321) failed.");
#endif
log_verbose("Testing the API u_versionToString().....\n");
u_versionToString(versionArray, versionString);
if(strcmp(versionString, "1.0.2.2") != 0){
log_err("ERROR: u_versionToString() failed. Expected: 1.0.2.2, Got=%s\n", versionString);
}
log_verbose("Testing the API u_versionToString().....with versionArray=NULL\n");
u_versionToString(NULL, versionString);
if(strcmp(versionString, "") != 0){
log_err("ERROR: u_versionToString() failed. with versionArray=NULL. It should just return\n");
}
log_verbose("Testing the API u_versionToString().....with versionArray=NULL\n");
u_versionToString(NULL, versionString);
if(strcmp(versionString, "") != 0){
log_err("ERROR: u_versionToString() failed . It should just return\n");
}
log_verbose("Testing the API u_versionToString().....with versionString=NULL\n");
u_versionToString(versionArray, NULL);
if(strcmp(versionString, "") != 0){
log_err("ERROR: u_versionToString() failed. with versionArray=NULL It should just return\n");
}
versionArray[0] = 0x0a;
log_verbose("Testing the API u_versionToString().....\n");
u_versionToString(versionArray, versionString);
if(strcmp(versionString, "10.0.2.2") != 0){
log_err("ERROR: u_versionToString() failed. Expected: 10.0.2.2, Got=%s\n", versionString);
}
versionArray[0] = 0xa0;
u_versionToString(versionArray, versionString);
if(strcmp(versionString, "160.0.2.2") != 0){
log_err("ERROR: u_versionToString() failed. Expected: 160.0.2.2, Got=%s\n", versionString);
}
versionArray[0] = 0xa0;
versionArray[1] = 0xa0;
u_versionToString(versionArray, versionString);
if(strcmp(versionString, "160.160.2.2") != 0){
log_err("ERROR: u_versionToString() failed. Expected: 160.160.2.2, Got=%s\n", versionString);
}
versionArray[0] = 0x01;
versionArray[1] = 0x0a;
u_versionToString(versionArray, versionString);
if(strcmp(versionString, "1.10.2.2") != 0){
log_err("ERROR: u_versionToString() failed. Expected: 160.160.2.2, Got=%s\n", versionString);
}
log_verbose("Testing the API u_versionFromString() ....\n");
u_versionFromString(versionArray, "1.3.5.6");
u_versionToString(versionArray, versionString);
if(strcmp(versionString, "1.3.5.6") != 0){
log_err("ERROR: u_getVersion() failed. Expected: 1.3.5.6, Got=%s\n", versionString);
}
log_verbose("Testing the API u_versionFromString() where versionArray=NULL....\n");
u_versionFromString(NULL, "1.3.5.6");
u_versionToString(versionArray, versionString);
if(strcmp(versionString, "1.3.5.6") != 0){
log_err("ERROR: u_getVersion() failed. Expected: 1.3.5.6, Got=%s\n", versionString);
}
log_verbose("Testing the API u_getVersion().....\n");
u_getVersion(versionArray);
u_versionToString(versionArray, versionString);
if(strcmp(versionString, U_ICU_VERSION) != 0){
log_err("ERROR: u_getVersion() failed. Got=%s, expected %s\n", versionString, U_ICU_VERSION);
}
log_verbose("Testing the API u_errorName()...\n");
str=(char*)u_errorName((UErrorCode)0);
if(strcmp(str, "U_ZERO_ERROR") != 0){
log_err("ERROR: u_getVersion() failed. Expected: U_ZERO_ERROR Got=%s\n", str);
}
log_verbose("Testing the API u_errorName()...\n");
str=(char*)u_errorName((UErrorCode)-127);
if(strcmp(str, "U_USING_DEFAULT_WARNING") != 0){
log_err("ERROR: u_getVersion() failed. Expected: U_USING_DEFAULT_WARNING Got=%s\n", str);
}
log_verbose("Testing the API u_errorName().. with BOGUS ERRORCODE...\n");
str=(char*)u_errorName((UErrorCode)200);
if(strcmp(str, "[BOGUS UErrorCode]") != 0){
log_err("ERROR: u_getVersion() failed. Expected: [BOGUS UErrorCode] Got=%s\n", str);
}
{
const char* dataDirectory;
UChar *udataDir=0;
UChar temp[100];
char *charvalue=0;
log_verbose("Testing chars to UChars\n");
/* This cannot really work on a japanese system. u_uastrcpy will have different results than */
/* u_charsToUChars when there is a backslash in the string! */
/*dataDirectory=u_getDataDirectory();*/
dataDirectory="directory1"; /*no backslashes*/
udataDir=(UChar*)malloc(sizeof(UChar) * (strlen(dataDirectory) + 1));
u_charsToUChars(dataDirectory, udataDir, (strlen(dataDirectory)+1));
u_uastrcpy(temp, dataDirectory);
if(u_strcmp(temp, udataDir) != 0){
log_err("ERROR: u_charsToUChars failed. Expected %s, Got %s\n", austrdup(temp), austrdup(udataDir));
}
log_verbose("Testing UChars to chars\n");
charvalue=(char*)malloc(sizeof(char) * (u_strlen(udataDir) + 1));
u_UCharsToChars(udataDir, charvalue, (u_strlen(udataDir)+1));
if(strcmp(charvalue, dataDirectory) != 0){
log_err("ERROR: u_UCharsToChars failed. Expected %s, Got %s\n", charvalue, dataDirectory);
}
free(charvalue);
free(udataDir);
}
log_verbose("Testing uprv_timezone()....\n");
{
int32_t tzoffset = uprv_timezone();
log_verbose("Value returned from uprv_timezone = %d\n", tzoffset);
if (tzoffset != 28800) {
log_verbose("***** WARNING: If testing in the PST timezone, t_timezone should return 28800! *****");
}
if ((tzoffset % 1800 != 0)) {
log_err("FAIL: t_timezone may be incorrect. It is not a multiple of 30min.");
}
tzoffset=uprv_getUTCtime();
}
}