C++ (Cpp) usb_diag_close示例

示例#1

0

显示文件

文件： diagfwd_hsic.c 项目： mdeejay/android_kernel_dlxu

void diagfwd_bridge_exit(void)
{
	pr_debug("diag: in %s\n", __func__);

	if (driver->hsic_device_enabled) {
		diag_hsic_close();
		driver->hsic_device_enabled = 0;
		diagmem_exit(driver, POOL_TYPE_ALL);
	}
	if (driver->diag_smux_enabled) {
		driver->lcid = LCID_INVALID;
		kfree(driver->buf_in_smux);
		driver->diag_smux_enabled = 0;
	}
	platform_driver_unregister(&msm_hsic_ch_driver);
	platform_driver_unregister(&msm_diagfwd_smux_driver);
	
#ifdef CONFIG_DIAG_OVER_USB
	if (driver->usb_mdm_connected)
		usb_diag_free_req(driver->mdm_ch);
	usb_diag_close(driver->mdm_ch);
#endif
	kfree(driver->usb_buf_mdm_out);
	kfree(driver->hsic_buf_tbl);
	kfree(driver->write_ptr_mdm);
	kfree(driver->usb_read_mdm_ptr);
	destroy_workqueue(driver->diag_bridge_wq);
}

示例#2

0

显示文件

文件： diag_usb.c 项目： magnostik/kernel-msm-3.10

void diag_usb_exit(int id)
{
	struct diag_usb_info *ch = NULL;

	if (id < 0 || id >= NUM_DIAG_USB_DEV) {
		pr_err("diag: In %s, incorrect id %d\n", __func__, id);
		return;
	}

	ch = &diag_usb[id];
	ch->ops = NULL;
	ch->connected = 0;
	ch->enabled = 0;
	ch->ctxt = 0;
	ch->read_cnt = 0;
	ch->write_cnt = 0;
	ch->read_pending = 0;
	diagmem_exit(driver, ch->mempool);
	ch->mempool = 0;
	if (ch->hdl) {
		usb_diag_close(ch->hdl);
		ch->hdl = NULL;
	}
	if (ch->usb_wq)
		destroy_workqueue(ch->usb_wq);
	kfree(ch->read_ptr);
	ch->read_ptr = NULL;
	kfree(ch->read_buf);
	ch->read_buf = NULL;
}

示例#3

0

显示文件

void diagfwd_sdio_exit(void)
{
#ifdef CONFIG_DIAG_OVER_USB
#ifdef CONFIG_SH_USB_CUST
//	if (driver->usb_connected)
//		diag_close();
#else /* CONFIG_SH_USB_CUST */
	if (driver->usb_connected)
		usb_diag_free_req(driver->mdm_ch);
#endif /* CONFIG_SH_USB_CUST */
#endif
	platform_driver_unregister(&msm_sdio_ch_driver);
#ifdef CONFIG_DIAG_OVER_USB
#ifdef CONFIG_SH_USB_CUST
//	diag_usb_unregister();
#else /* CONFIG_SH_USB_CUST */
	usb_diag_close(driver->mdm_ch);
#endif /* CONFIG_SH_USB_CUST */
#endif
	kfree(driver->buf_in_sdio);
	kfree(driver->usb_buf_mdm_out);
	kfree(driver->write_ptr_mdm);
	kfree(driver->usb_read_mdm_ptr);
	destroy_workqueue(driver->diag_sdio_wq);
}

示例#4

0

显示文件

文件： diagfwd.c 项目： emuikernel/YulongKernel

void diagfwd_exit(void)
{
	int i;

	for (i = 0; i < NUM_SMD_DATA_CHANNELS; i++)
		diag_smd_destructor(&driver->smd_data[i]);

#ifdef CONFIG_DIAG_OVER_USB
	if (driver->usb_connected)
		usb_diag_free_req(driver->legacy_ch);
	usb_diag_close(driver->legacy_ch);
#endif
	platform_driver_unregister(&msm_smd_ch1_driver);
	platform_driver_unregister(&msm_diag_dci_driver);
	platform_driver_unregister(&diag_smd_lite_driver);

	kfree(driver->buf_msg_mask_update);
	kfree(driver->buf_log_mask_update);
	kfree(driver->buf_event_mask_update);
	kfree(driver->usb_buf_out);
	kfree(driver->hdlc_buf);
	kfree(driver->client_map);
	kfree(driver->buf_tbl);
	kfree(driver->data_ready);
	kfree(driver->table);
	kfree(driver->pkt_buf);
	kfree(driver->usb_read_ptr);
	kfree(driver->apps_rsp_buf);
	kfree(driver->user_space_data);
	destroy_workqueue(driver->diag_wq);
}

示例#5

0

显示文件

void diagfwd_exit(void)
{
	smd_close(driver->ch);
	smd_close(driver->chqdsp);
	driver->ch = 0;		/*SMD can make this NULL */
	driver->chqdsp = 0;
#ifdef CONFIG_DIAG_OVER_USB
	if (driver->usb_connected)
		usb_diag_free_req(driver->legacy_ch);
#endif
	platform_driver_unregister(&msm_smd_ch1_driver);
#ifdef CONFIG_DIAG_OVER_USB
	usb_diag_close(driver->legacy_ch);
#endif

	kfree(driver->buf_in_1);
	kfree(driver->buf_in_2);
	kfree(driver->buf_in_qdsp_1);
	kfree(driver->buf_in_qdsp_2);
#if defined(CONFIG_MACH_MECHA) //|| defined(CONFIG_ARCH_MSM8X60_LTE)
	kfree(driver->buf_in_mdm_1);
	kfree(driver->buf_in_mdm_2);
#endif
	kfree(driver->usb_buf_out);
	kfree(driver->hdlc_buf);
	kfree(driver->msg_masks);
	kfree(driver->log_masks);
	kfree(driver->event_masks);
	kfree(driver->client_map);
	kfree(driver->buf_tbl);
	kfree(driver->data_ready);
#if defined(CONFIG_MACH_MECHA) //|| defined(CONFIG_ARCH_MSM8X60_LTE)
	kfree(driver->mdmclient_map);
	//kfree(driver->mdmbuf_tbl);
	kfree(driver->mdmdata_ready);
#endif
	kfree(driver->table);
	kfree(driver->pkt_buf);
	kfree(driver->write_ptr_1);
	kfree(driver->write_ptr_2);
	kfree(driver->write_ptr_qdsp_1);
	kfree(driver->write_ptr_qdsp_2);
#if defined(CONFIG_MACH_MECHA) //|| defined(CONFIG_ARCH_MSM8X60_LTE)
	kfree(driver->write_ptr_mdm_1);
	kfree(driver->write_ptr_mdm_2);
#endif
	kfree(driver->usb_read_ptr);
#ifdef CONFIG_DIAG_NO_MODEM
	kfree(driver->apps_rsp_buf);
#endif
	destroy_workqueue(driver->diag_wq);
}

示例#6

0

显示文件

void diagfwd_exit(void)
{
	smd_close(driver->ch);
	smd_close(driver->chqdsp);
	driver->ch = 0;		/*SMD can make this NULL */
	driver->chqdsp = 0;
#ifdef CONFIG_DIAG_OVER_USB
#ifdef CONFIG_SH_USB_CUST
	if (driver->usb_connected)
		diag_close();
#else /* CONFIG_SH_USB_CUST */
	if (driver->usb_connected)
		usb_diag_free_req(driver->legacy_ch);
#endif /* CONFIG_SH_USB_CUST */
#endif
	platform_driver_unregister(&msm_smd_ch1_driver);
#ifdef CONFIG_DIAG_OVER_USB
#ifdef CONFIG_SH_USB_CUST
	diag_usb_unregister();
#else /* CONFIG_SH_USB_CUST */
	usb_diag_close(driver->legacy_ch);
#endif /* CONFIG_SH_USB_CUST */
#endif


	kfree(driver->buf_in_1);
	kfree(driver->buf_in_2);
	kfree(driver->buf_in_qdsp_1);
	kfree(driver->buf_in_qdsp_2);
	kfree(driver->usb_buf_out);
	kfree(driver->hdlc_buf);
	kfree(driver->msg_masks);
	kfree(driver->log_masks);
	kfree(driver->event_masks);
	kfree(driver->client_map);
	kfree(driver->buf_tbl);
	kfree(driver->data_ready);
	kfree(driver->table);
	kfree(driver->pkt_buf);
	kfree(driver->write_ptr_1);
	kfree(driver->write_ptr_2);
	kfree(driver->write_ptr_qdsp_1);
	kfree(driver->write_ptr_qdsp_2);
	kfree(driver->usb_read_ptr);
	kfree(driver->apps_rsp_buf);
#ifndef CONFIG_SH_USB_CUST
	destroy_workqueue(driver->diag_wq);
#endif /* CONFIG_SH_USB_CUST */
}

示例#7

0

显示文件

文件： diagfwd_sdio.c 项目： AmeriCanAndroid/kernel-android-msm-2.6.35

void diagfwd_sdio_exit(void)
{
#ifdef CONFIG_DIAG_OVER_USB
	if (driver->usb_connected)
		usb_diag_free_req(driver->mdm_ch);
#endif
	platform_driver_unregister(&msm_sdio_ch_driver);
#ifdef CONFIG_DIAG_OVER_USB
	usb_diag_close(driver->mdm_ch);
#endif
		kfree(driver->buf_in_sdio_1);
		kfree(driver->buf_in_sdio_2);
	kfree(driver->usb_buf_mdm_out);
		kfree(driver->write_ptr_mdm_1);
		kfree(driver->write_ptr_mdm_2);
	kfree(driver->usb_read_mdm_ptr);
	destroy_workqueue(driver->diag_sdio_wq);
}

示例#8

0

显示文件

文件： diagfwd.c 项目： dic1911/android_kernel_htc_gtou

void diagfwd_exit(void)
{
	smd_close(driver->ch);
	smd_close(driver->chqdsp);
	smd_close(driver->ch_wcnss);
	driver->ch = 0;		/* SMD can make this NULL */
	driver->chqdsp = 0;
	driver->ch_wcnss = 0;
	smd_diag_initialized = 0;
#ifdef CONFIG_DIAG_OVER_USB
	if (driver->usb_connected)
		usb_diag_free_req(driver->legacy_ch);
	usb_diag_close(driver->legacy_ch);
#endif
	platform_driver_unregister(&msm_smd_ch1_driver);
	platform_driver_unregister(&diag_smd_lite_driver);
	kfree(driver->buf_in_1);
	kfree(driver->buf_in_2);
	kfree(driver->buf_in_qdsp_1);
	kfree(driver->buf_in_qdsp_2);
	kfree(driver->buf_in_wcnss);
	kfree(driver->usb_buf_out);
	kfree(driver->hdlc_buf);
	kfree(driver->msg_masks);
	kfree(driver->log_masks);
	kfree(driver->event_masks);
	kfree(driver->client_map);
	kfree(driver->buf_tbl);
	kfree(driver->data_ready);
	kfree(driver->table);
	kfree(driver->pkt_buf);
	kfree(driver->write_ptr_1);
	kfree(driver->write_ptr_2);
	kfree(driver->write_ptr_qdsp_1);
	kfree(driver->write_ptr_qdsp_2);
	kfree(driver->write_ptr_wcnss);
	kfree(driver->usb_read_ptr);
	kfree(driver->apps_rsp_buf);
	kfree(driver->user_space_data);
	destroy_workqueue(driver->diag_wq);
}

示例#9

0

显示文件

文件： diagfwd_bridge.c 项目： ReflexBow/kernel_moto-x

void diagfwd_bridge_exit(void)
{
	int i;
	pr_debug("diag: in %s\n", __func__);

	for (i = 0; i < MAX_HSIC_CH; i++) {
		if (diag_hsic[i].hsic_device_enabled) {
			diag_hsic_close(i);
			diag_hsic[i].hsic_device_enabled = 0;
			diag_bridge[i].enabled = 0;
		}
		diag_hsic[i].hsic_inited = 0;
		kfree(diag_hsic[i].hsic_buf_tbl);
	}
	diagmem_exit(driver, POOL_TYPE_ALL);
	if (driver->diag_smux_enabled) {
		driver->lcid = LCID_INVALID;
		kfree(driver->buf_in_smux);
		driver->diag_smux_enabled = 0;
		diag_bridge[SMUX].enabled = 0;
	}
	platform_driver_unregister(&msm_hsic_ch_driver);
	platform_driver_unregister(&msm_diagfwd_smux_driver);
	/* destroy USB MDM specific variables */
	for (i = 0; i < MAX_BRIDGES; i++) {
		if (diag_bridge[i].enabled) {
#ifdef CONFIG_DIAG_OVER_USB
			if (diag_bridge[i].usb_connected)
				usb_diag_free_req(diag_bridge[i].ch);
			usb_diag_close(diag_bridge[i].ch);
#endif
			kfree(diag_bridge[i].usb_buf_out);
			kfree(diag_bridge[i].usb_read_ptr);
			destroy_workqueue(diag_bridge[i].wq);
			diag_bridge[i].enabled = 0;
		}
	}
	kfree(driver->write_ptr_mdm);
}

示例#10

0

显示文件

文件： diagfwd_hsic.c 项目： NooNameR/k3_bravo

void __exit diagfwd_hsic_exit(void)
{
	pr_debug("DIAG in %s\n", __func__);

	if (driver->hsic_initialized)
		diag_hsic_close();

#ifdef CONFIG_DIAG_OVER_USB
	if (driver->usb_mdm_connected)
		usb_diag_free_req(driver->mdm_ch);
#endif
	platform_driver_unregister(&msm_hsic_ch_driver);
#ifdef CONFIG_DIAG_OVER_USB
	usb_diag_close(driver->mdm_ch);
#endif
	kfree(driver->buf_in_hsic);
	kfree(driver->usb_buf_mdm_out);
	kfree(driver->write_ptr_mdm);
	kfree(driver->usb_read_mdm_ptr);
	destroy_workqueue(driver->diag_hsic_wq);

	driver->hsic_device_enabled = 0;
}

示例#11

0

显示文件

文件： diagfwd_hsic.c 项目： thedancomplex/BMW-OpenSource

void diagfwd_hsic_exit(void)
{
	pr_debug("diag: in %s\n", __func__);

	if (driver->hsic_initialized)
		diag_hsic_close();
	diagmem_exit(driver, POOL_TYPE_ALL);
	/* destroy USB MDM specific variables */
#ifdef CONFIG_DIAG_OVER_USB
	if (driver->usb_mdm_connected)
		usb_diag_free_req(driver->mdm_ch);
#endif
	platform_driver_unregister(&msm_hsic_ch_driver);
#ifdef CONFIG_DIAG_OVER_USB
	usb_diag_close(driver->mdm_ch);
#endif
	kfree(driver->usb_buf_mdm_out);
	kfree(driver->hsic_buf_tbl);
	kfree(driver->usb_read_mdm_ptr);
	destroy_workqueue(driver->diag_hsic_wq);

	driver->hsic_device_enabled = 0;
}