int fsl_usb_host_init(struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
struct fsl_xcvr_ops *xops;
pr_debug("%s: pdev=0x%p pdata=0x%p\n", __func__, pdev, pdata);
xops = fsl_usb_get_xcvr(pdata->transceiver);
if (!xops) {
printk(KERN_ERR "%s transceiver ops missing\n", pdata->name);
return -EINVAL;
}
pdata->xcvr_ops = xops;
pdata->xcvr_type = xops->xcvr_type;
pdata->pdev = pdev;
if (fsl_check_usbclk() != 0)
return -EINVAL;
pr_debug("%s: grab pins\n", __func__);
if (pdata->gpio_usb_active())
return -EINVAL;
if (clk_enable(usb_clk)) {
printk(KERN_ERR "clk_enable(usb_clk) failed\n");
return -EINVAL;
}
if (cpu_is_mx51()) {
usb_clk = clk_get(NULL, "usboh3_clk");
clk_enable(usb_clk);
clk_put(usb_clk);
}
/* enable board power supply for xcvr */
if (pdata->xcvr_pwr) {
if (pdata->xcvr_pwr->regu1)
regulator_enable(pdata->xcvr_pwr->regu1);
if (pdata->xcvr_pwr->regu2)
regulator_enable(pdata->xcvr_pwr->regu2);
}
if (xops->init)
xops->init(xops);
if (usb_register_remote_wakeup(pdev))
pr_debug("Host is not a wakeup source.\n");
if (xops->xcvr_type == PORTSC_PTS_SERIAL) {
if (cpu_is_mx35()) {
usbh2_set_serial_xcvr();
/* Close the internal 60Mhz */
USBCTRL &= ~UCTRL_XCSH2;
} else if (cpu_is_mx25())
usbh2_set_serial_xcvr();
else
usbh1_set_serial_xcvr();
} else if (xops->xcvr_type == PORTSC_PTS_ULPI) {
if (cpu_is_mx51()) {
#ifdef CONFIG_USB_EHCI_ARC_H1
if (pdata->name == "Host 1") {
usbh1_set_ulpi_xcvr();
if (cpu_is_mx51())
gpio_usbh1_setback_stp();
}
#endif
#ifdef CONFIG_USB_EHCI_ARC_H2
if (pdata->name == "Host 2") {
usbh2_set_ulpi_xcvr();
if (cpu_is_mx51())
gpio_usbh2_setback_stp();
}
#endif
} else
usbh2_set_ulpi_xcvr();
}
if (pdata->name == "Host 2")
/* disable remote wakeup irq */
USBCTRL &= ~UCTRL_H2WIE;
pr_debug("%s: %s success\n", __func__, pdata->name);
return 0;
}
int fsl_usb_host_init(struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
struct fsl_xcvr_ops *xops;
pr_debug("%s: pdev=0x%p pdata=0x%p\n", __func__, pdev, pdata);
xops = fsl_usb_get_xcvr(pdata->transceiver);
if (!xops) {
printk(KERN_ERR "%s transceiver ops missing\n", pdata->name);
return -EINVAL;
}
pdata->xcvr_ops = xops;
pdata->xcvr_type = xops->xcvr_type;
pdata->pdev = pdev;
if (fsl_check_usbclk() != 0)
return -EINVAL;
/* set host2 usb phy usb3317 power supply for imx31 3 stack */
if ((pdata->xcvr_type == PORTSC_PTS_ULPI) && (machine_is_mx31_3ds())) {
pdata->xcvr_pwr =
kmalloc(sizeof(struct fsl_xcvr_power), GFP_KERNEL);
if (!(pdata->xcvr_pwr))
return -ENOMEM;
pdata->xcvr_pwr->usb_pdev = pdev;
usbh2_get_xcvr_power(&(pdev->dev));
}
pr_debug("%s: grab pins\n", __func__);
if (pdata->gpio_usb_active())
return -EINVAL;
if (clk_enable(usb_clk)) {
printk(KERN_ERR "clk_enable(usb_clk) failed\n");
return -EINVAL;
}
if (cpu_is_mx51()) {
usb_clk = clk_get(NULL, "usboh3_clk");
clk_enable(usb_clk);
clk_put(usb_clk);
}
if (xops->init)
xops->init(xops);
if (xops->xcvr_type == PORTSC_PTS_SERIAL) {
if (machine_is_mx35_3ds())
usbh2_set_serial_xcvr();
else
usbh1_set_serial_xcvr();
} else if (xops->xcvr_type == PORTSC_PTS_ULPI) {
if (cpu_is_mx51()) {
usbh1_set_ulpi_xcvr();
gpio_usbh1_setback_stp();
} else
usbh2_set_ulpi_xcvr();
}
pr_debug("%s: %s success\n", __func__, pdata->name);
return 0;
}
int fsl_usb_host_init(struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
struct fsl_xcvr_ops *xops;
pr_debug("%s: pdev=0x%p pdata=0x%p\n", __func__, pdev, pdata);
xops = fsl_usb_get_xcvr(pdata->transceiver);
if (!xops) {
printk(KERN_ERR "%s transceiver ops missing\n", pdata->name);
return -EINVAL;
}
pdata->xcvr_ops = xops;
pdata->xcvr_type = xops->xcvr_type;
pdata->pdev = pdev;
if (fsl_check_usbclk() != 0)
return -EINVAL;
pr_debug("%s: grab pins\n", __func__);
if (pdata->gpio_usb_active && pdata->gpio_usb_active())
return -EINVAL;
if (cpu_is_mx50())
/* Turn on AHB CLK for H1*/
USB_CLKONOFF_CTRL &= ~H1_AHBCLK_OFF;
/* enable board power supply for xcvr */
if (pdata->xcvr_pwr) {
if (pdata->xcvr_pwr->regu1)
regulator_enable(pdata->xcvr_pwr->regu1);
if (pdata->xcvr_pwr->regu2)
regulator_enable(pdata->xcvr_pwr->regu2);
}
if (xops->init)
xops->init(xops);
if (usb_register_remote_wakeup(pdev))
pr_debug("%s port is not a wakeup source.\n", pdata->name);
if (!(cpu_is_mx6())) {
if (xops->xcvr_type == PORTSC_PTS_SERIAL) {
if (cpu_is_mx35()) {
usbh2_set_serial_xcvr();
/* Close the internal 60Mhz */
USBCTRL &= ~UCTRL_XCSH2;
} else if (cpu_is_mx25())
usbh2_set_serial_xcvr();
else
usbh1_set_serial_xcvr();
} else if (xops->xcvr_type == PORTSC_PTS_ULPI) {
if (!strcmp("Host 1", pdata->name))
usbh1_set_ulpi_xcvr();
if (!strcmp("Host 2", pdata->name))
usbh2_set_ulpi_xcvr();
} else if (xops->xcvr_type == PORTSC_PTS_UTMI) {
usbh1_set_utmi_xcvr();
}
} else {
#ifdef CONFIG_ARCH_MX6
if (!strcmp("Host 1", pdata->name)) {
if (machine_is_mx6q_arm2())
USB_H1_CTRL &= ~UCTRL_OVER_CUR_POL;
else if (machine_is_mx6q_sabrelite())
USB_H1_CTRL |= UCTRL_OVER_CUR_POL;
USB_H1_CTRL |= UCTRL_OVER_CUR_DIS;
if (machine_is_cm_fx6())
USB_H1_CTRL |= UCTRL_PWR_POL;
}
#endif
}
pr_debug("%s: %s success\n", __func__, pdata->name);
return 0;
}