/* * v_eof -- * Vi end-of-file error. * * PUBLIC: void v_eof __P((SCR *, MARK *)); */ void v_eof(SCR *sp, MARK *mp) { recno_t lno; if (mp == NULL) v_emsg(sp, NULL, VIM_EOF); else { if (db_last(sp, &lno)) return; if (mp->lno >= lno) v_emsg(sp, NULL, VIM_EOF); else msgq(sp, M_BERR, "195|Movement past the end-of-file"); } }
/* * v_eol -- * Vi end-of-line error. * * PUBLIC: void v_eol __P((SCR *, MARK *)); */ void v_eol(SCR *sp, MARK *mp) { size_t len; if (mp == NULL) v_emsg(sp, NULL, VIM_EOL); else { if (db_get(sp, mp->lno, DBG_FATAL, NULL, &len)) return; if (mp->cno == len - 1) v_emsg(sp, NULL, VIM_EOL); else msgq(sp, M_BERR, "196|Movement past the end-of-line"); } }
/* * v_ulcase -- [count]~ * Toggle upper & lower case letters. * * !!! * Historic vi didn't permit ~ to cross newline boundaries. I can * think of no reason why it shouldn't, which at least lets the user * auto-repeat through a paragraph. * * !!! * In historic vi, the count was ignored. It would have been better * if there had been an associated motion, but it's too late to make * that the default now. * * PUBLIC: int v_ulcase __P((SCR *, VICMD *)); */ int v_ulcase(SCR *sp, VICMD *vp) { db_recno_t lno; size_t cno, lcnt, len; u_long cnt; CHAR_T *p; lno = vp->m_start.lno; cno = vp->m_start.cno; for (cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; cnt > 0; cno = 0) { /* SOF is an error, EOF is an infinite count sink. */ if (db_get(sp, lno, 0, &p, &len)) { if (lno == 1) { v_emsg(sp, NULL, VIM_EMPTY); return (1); } --lno; break; } /* Empty lines decrement the count by one. */ if (len == 0) { --cnt; vp->m_final.cno = 0; continue; } if (cno + cnt >= len) { lcnt = len - 1; cnt -= len - cno; vp->m_final.cno = len - 1; } else { lcnt = cno + cnt - 1; cnt = 0; vp->m_final.cno = lcnt + 1; } if (ulcase(sp, lno, p, len, cno, lcnt)) return (1); if (cnt > 0) ++lno; } vp->m_final.lno = lno; return (0); }
/* * v_z -- [count]z[count][-.+^<CR>] * Move the screen. * * PUBLIC: int v_z(SCR *, VICMD *); */ int v_z(SCR *sp, VICMD *vp) { recno_t lno; e_key_t value; /* * The first count is the line to use. If the value doesn't * exist, use the last line. */ if (F_ISSET(vp, VC_C1SET)) { lno = vp->count; if (!db_exist(sp, lno) && db_last(sp, &lno)) return (1); } else lno = vp->m_start.lno; /* Set default return cursor line. */ vp->m_final.lno = lno; vp->m_final.cno = vp->m_start.cno; /* * The second count is the displayed window size, i.e. the 'z' command * is another way to get artificially small windows. Note, you can't * grow beyond the size of the window. * * !!! * A window size of 0 was historically allowed, and simply ignored. * This could be much more simply done by modifying the value of the * O_WINDOW option, but that's not how it worked historically. */ if (F_ISSET(vp, VC_C2SET) && vp->count2 != 0) { if (vp->count2 > O_VAL(sp, O_WINDOW)) vp->count2 = O_VAL(sp, O_WINDOW); if (vs_crel(sp, vp->count2)) return (1); } switch (vp->character) { case '-': /* Put the line at the bottom. */ if (vs_sm_fill(sp, lno, P_BOTTOM)) return (1); break; case '.': /* Put the line in the middle. */ if (vs_sm_fill(sp, lno, P_MIDDLE)) return (1); break; case '+': /* * If the user specified a line number, put that line at the * top and move the cursor to it. Otherwise, scroll forward * a screen from the current screen. */ if (F_ISSET(vp, VC_C1SET)) { if (vs_sm_fill(sp, lno, P_TOP)) return (1); if (vs_sm_position(sp, &vp->m_final, 0, P_TOP)) return (1); } else if (vs_sm_scroll(sp, &vp->m_final, sp->t_rows, Z_PLUS)) return (1); break; case '^': /* * If the user specified a line number, put that line at the * bottom, move the cursor to it, and then display the screen * before that one. Otherwise, scroll backward a screen from * the current screen. * * !!! * Note, we match the off-by-one characteristics of historic * vi, here. */ if (F_ISSET(vp, VC_C1SET)) { if (vs_sm_fill(sp, lno, P_BOTTOM)) return (1); if (vs_sm_position(sp, &vp->m_final, 0, P_TOP)) return (1); if (vs_sm_fill(sp, vp->m_final.lno, P_BOTTOM)) return (1); } else if (vs_sm_scroll(sp, &vp->m_final, sp->t_rows, Z_CARAT)) return (1); break; default: /* Put the line at the top for <cr>. */ value = KEY_VAL(sp, vp->character); if (value != K_CR && value != K_NL) { v_emsg(sp, vp->kp->usage, VIM_USAGE); return (1); } if (vs_sm_fill(sp, lno, P_TOP)) return (1); break; } return (0); }
/* * v_replace -- [count]r<char> * * !!! * The r command in historic vi was almost beautiful in its badness. For * example, "r<erase>" and "r<word erase>" beeped the terminal and deleted * a single character. "Nr<carriage return>", where N was greater than 1, * inserted a single carriage return. "r<escape>" did cancel the command, * but "r<literal><escape>" erased a single character. To enter a literal * <literal> character, it required three <literal> characters after the * command. This may not be right, but at least it's not insane. * * PUBLIC: int v_replace __P((SCR *, VICMD *)); */ int v_replace(SCR *sp, VICMD *vp) { EVENT ev; VI_PRIVATE *vip; TEXT *tp; size_t blen, len; u_long cnt; int quote, rval; CHAR_T *bp; CHAR_T *p; vip = VIP(sp); /* * If the line doesn't exist, or it's empty, replacement isn't * allowed. It's not hard to implement, but: * * 1: It's historic practice (vi beeped before the replacement * character was even entered). * 2: For consistency, this change would require that the more * general case, "Nr", when the user is < N characters from * the end of the line, also work, which would be a bit odd. * 3: Replacing with a <newline> has somewhat odd semantics. */ if (db_get(sp, vp->m_start.lno, DBG_FATAL, &p, &len)) return (1); if (len == 0) { msgq(sp, M_BERR, "186|No characters to replace"); return (1); } /* * Figure out how many characters to be replace. For no particular * reason (other than that the semantics of replacing the newline * are confusing) only permit the replacement of the characters in * the current line. I suppose we could append replacement characters * to the line, but I see no compelling reason to do so. Check this * before we get the character to match historic practice, where Nr * failed immediately if there were less than N characters from the * cursor to the end of the line. */ cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; vp->m_stop.lno = vp->m_start.lno; vp->m_stop.cno = vp->m_start.cno + cnt - 1; if (vp->m_stop.cno > len - 1) { v_eol(sp, &vp->m_start); return (1); } /* * If it's not a repeat, reset the current mode and get a replacement * character. */ quote = 0; if (!F_ISSET(vp, VC_ISDOT)) { sp->showmode = SM_REPLACE; if (vs_refresh(sp, 0)) return (1); next: if (v_event_get(sp, &ev, 0, 0)) return (1); switch (ev.e_event) { case E_CHARACTER: /* * <literal_next> means escape the next character. * <escape> means they changed their minds. */ if (!quote) { if (ev.e_value == K_VLNEXT) { quote = 1; goto next; } if (ev.e_value == K_ESCAPE) return (0); } vip->rlast = ev.e_c; vip->rvalue = ev.e_value; break; case E_ERR: case E_EOF: F_SET(sp, SC_EXIT_FORCE); return (1); case E_INTERRUPT: /* <interrupt> means they changed their minds. */ return (0); case E_WRESIZE: /* <resize> interrupts the input mode. */ v_emsg(sp, NULL, VIM_WRESIZE); return (0); case E_REPAINT: if (vs_repaint(sp, &ev)) return (1); goto next; default: v_event_err(sp, &ev); return (0); } } /* Copy the line. */ GET_SPACE_RETW(sp, bp, blen, len); MEMMOVE(bp, p, len); p = bp; /* * Versions of nvi before 1.57 created N new lines when they replaced * N characters with <carriage-return> or <newline> characters. This * is different from the historic vi, which replaced N characters with * a single new line. Users complained, so we match historic practice. */ if ((!quote && vip->rvalue == K_CR) || vip->rvalue == K_NL) { /* Set return line. */ vp->m_stop.lno = vp->m_start.lno + 1; vp->m_stop.cno = 0; /* The first part of the current line. */ if (db_set(sp, vp->m_start.lno, p, vp->m_start.cno)) goto err_ret; /* * The rest of the current line. And, of course, now it gets * tricky. If there are characters left in the line and if * the autoindent edit option is set, white space after the * replaced character is discarded, autoindent is applied, and * the cursor moves to the last indent character. */ p += vp->m_start.cno + cnt; len -= vp->m_start.cno + cnt; if (len != 0 && O_ISSET(sp, O_AUTOINDENT)) for (; len && isblank(*p); --len, ++p); if ((tp = text_init(sp, p, len, len)) == NULL) goto err_ret; if (len != 0 && O_ISSET(sp, O_AUTOINDENT)) { if (v_txt_auto(sp, vp->m_start.lno, NULL, 0, tp)) goto err_ret; vp->m_stop.cno = tp->ai ? tp->ai - 1 : 0; } else vp->m_stop.cno = 0; vp->m_stop.cno = tp->ai ? tp->ai - 1 : 0; if (db_append(sp, 1, vp->m_start.lno, tp->lb, tp->len)) err_ret: rval = 1; else { text_free(tp); rval = 0; } } else { STRSET(bp + vp->m_start.cno, vip->rlast, cnt); rval = db_set(sp, vp->m_start.lno, bp, len); } FREE_SPACEW(sp, bp, blen); vp->m_final = vp->m_stop; return (rval); }
/* * v_motion -- * * Get resulting motion mark. */ static int v_motion( SCR *sp, VICMD *dm, VICMD *vp, int *mappedp) { VICMD motion; size_t len; u_long cnt; u_int flags; int tilde_reset, notused; /* * If '.' command, use the dot motion, else get the motion command. * Clear any line motion flags, the subsequent motion isn't always * the same, i.e. "/aaa" may or may not be a line motion. */ if (F_ISSET(vp, VC_ISDOT)) { motion = *dm; F_SET(&motion, VC_ISDOT); F_CLR(&motion, VM_COMMASK); } else { memset(&motion, 0, sizeof(VICMD)); if (v_cmd(sp, NULL, &motion, vp, ¬used, mappedp) != GC_OK) return (1); } /* * A count may be provided both to the command and to the motion, in * which case the count is multiplicative. For example, "3y4y" is the * same as "12yy". This count is provided to the motion command and * not to the regular function. */ cnt = motion.count = F_ISSET(&motion, VC_C1SET) ? motion.count : 1; if (F_ISSET(vp, VC_C1SET)) { motion.count *= vp->count; F_SET(&motion, VC_C1SET); /* * Set flags to restore the original values of the command * structure so dot commands can change the count values, * e.g. "2dw" "3." deletes a total of five words. */ F_CLR(vp, VC_C1SET); F_SET(vp, VC_C1RESET); } /* * Some commands can be repeated to indicate the current line. In * this case, or if the command is a "line command", set the flags * appropriately. If not a doubled command, run the function to get * the resulting mark. */ if (vp->key == motion.key) { F_SET(vp, VM_LDOUBLE | VM_LMODE); /* Set the origin of the command. */ vp->m_start.lno = sp->lno; vp->m_start.cno = 0; /* * Set the end of the command. * * If the current line is missing, i.e. the file is empty, * historic vi permitted a "cc" or "!!" command to insert * text. */ vp->m_stop.lno = sp->lno + motion.count - 1; if (db_get(sp, vp->m_stop.lno, 0, NULL, &len)) { if (vp->m_stop.lno != 1 || (vp->key != 'c' && vp->key != '!')) { v_emsg(sp, NULL, VIM_EMPTY); return (1); } vp->m_stop.cno = 0; } else vp->m_stop.cno = len ? len - 1 : 0; } else { /* * Motion commands change the underlying movement (*snarl*). * For example, "l" is illegal at the end of a line, but "dl" * is not. Set flags so the function knows the situation. */ motion.rkp = vp->kp; /* * XXX * Use yank instead of creating a new motion command, it's a * lot easier for now. */ if (vp->kp == &tmotion) { tilde_reset = 1; vp->kp = &vikeys['y']; } else tilde_reset = 0; /* * Copy the key flags into the local structure, except for the * RCM flags -- the motion command will set the RCM flags in * the vp structure if necessary. This means that the motion * command is expected to determine where the cursor ends up! * However, we save off the current RCM mask and restore it if * it no RCM flags are set by the motion command, with a small * modification. * * We replace the VM_RCM_SET flag with the VM_RCM flag. This * is so that cursor movement doesn't set the relative position * unless the motion command explicitly specified it. This * appears to match historic practice, but I've never been able * to develop a hard-and-fast rule. */ flags = F_ISSET(vp, VM_RCM_MASK); if (LF_ISSET(VM_RCM_SET)) { LF_SET(VM_RCM); LF_CLR(VM_RCM_SET); } F_CLR(vp, VM_RCM_MASK); F_SET(&motion, motion.kp->flags & ~VM_RCM_MASK); /* * Set the three cursor locations to the current cursor. This * permits commands like 'j' and 'k', that are line oriented * motions and have special cursor suck semantics when they are * used as standalone commands, to ignore column positioning. */ motion.m_final.lno = motion.m_stop.lno = motion.m_start.lno = sp->lno; motion.m_final.cno = motion.m_stop.cno = motion.m_start.cno = sp->cno; /* Run the function. */ if ((motion.kp->func)(sp, &motion)) return (1); /* * If the current line is missing, i.e. the file is empty, * historic vi allowed "c<motion>" or "!<motion>" to insert * text. Otherwise fail -- most motion commands will have * already failed, but some, e.g. G, succeed in empty files. */ if (!db_exist(sp, vp->m_stop.lno)) { if (vp->m_stop.lno != 1 || (vp->key != 'c' && vp->key != '!')) { v_emsg(sp, NULL, VIM_EMPTY); return (1); } vp->m_stop.cno = 0; } /* * XXX * See above. */ if (tilde_reset) vp->kp = &tmotion; /* * Copy cut buffer, line mode and cursor position information * from the motion command structure, i.e. anything that the * motion command can set for us. The commands can flag the * movement as a line motion (see v_sentence) as well as set * the VM_RCM_* flags explicitly. */ F_SET(vp, F_ISSET(&motion, VM_COMMASK | VM_RCM_MASK)); /* * If the motion command set no relative motion flags, use * the (slightly) modified previous values. */ if (!F_ISSET(vp, VM_RCM_MASK)) F_SET(vp, flags); /* * Commands can change behaviors based on the motion command * used, for example, the ! command repeated the last bang * command if N or n was used as the motion. */ vp->rkp = motion.kp; /* * Motion commands can reset all of the cursor information. * If the motion is in the reverse direction, switch the * from and to MARK's so that it's in a forward direction. * Motions are from the from MARK to the to MARK (inclusive). */ if (motion.m_start.lno > motion.m_stop.lno || (motion.m_start.lno == motion.m_stop.lno && motion.m_start.cno > motion.m_stop.cno)) { vp->m_start = motion.m_stop; vp->m_stop = motion.m_start; } else { vp->m_start = motion.m_start; vp->m_stop = motion.m_stop; } vp->m_final = motion.m_final; } /* * If the command sets dot, save the motion structure. The motion * count was changed above and needs to be reset, that's why this * is done here, and not in the calling routine. */ if (F_ISSET(vp->kp, V_DOT)) { *dm = motion; dm->count = cnt; } return (0); }
/* * v_cmd -- * * The command structure for vi is less complex than ex (and don't think * I'm not grateful!) The command syntax is: * * [count] [buffer] [count] key [[motion] | [buffer] [character]] * * and there are several special cases. The motion value is itself a vi * command, with the syntax: * * [count] key [character] */ static gcret_t v_cmd( SCR *sp, VICMD *dp, VICMD *vp, VICMD *ismotion, /* Previous key if getting motion component. */ int *comcountp, int *mappedp) { enum { COMMANDMODE, ISPARTIAL, NOTPARTIAL } cpart; EVENT ev; VIKEYS const *kp; gcret_t gcret; u_int flags; CHAR_T key; char *s; /* * Get a key. * * <escape> cancels partial commands, i.e. a command where at least * one non-numeric character has been entered. Otherwise, it beeps * the terminal. * * !!! * POSIX 1003.2-1992 explicitly disallows cancelling commands where * all that's been entered is a number, requiring that the terminal * be alerted. */ cpart = ismotion == NULL ? COMMANDMODE : ISPARTIAL; if ((gcret = v_key(sp, ismotion == NULL, &ev, EC_MAPCOMMAND)) != GC_OK) { if (gcret == GC_EVENT) vp->ev = ev; return (gcret); } if (ev.e_value == K_ESCAPE) goto esc; if (F_ISSET(&ev.e_ch, CH_MAPPED)) *mappedp = 1; key = ev.e_c; if (ismotion == NULL) cpart = NOTPARTIAL; /* Pick up an optional buffer. */ if (key == '"') { cpart = ISPARTIAL; if (ismotion != NULL) { v_emsg(sp, NULL, VIM_COMBUF); return (GC_ERR); } KEY(vp->buffer, 0); F_SET(vp, VC_BUFFER); KEY(key, EC_MAPCOMMAND); } /* * Pick up an optional count, where a leading 0 is not a count, * it's a command. */ if (ISDIGIT(key) && key != '0') { if (v_count(sp, key, &vp->count)) return (GC_ERR); F_SET(vp, VC_C1SET); *comcountp = 1; KEY(key, EC_MAPCOMMAND); } else *comcountp = 0; /* Pick up optional buffer. */ if (key == '"') { cpart = ISPARTIAL; if (F_ISSET(vp, VC_BUFFER)) { msgq(sp, M_ERR, "234|Only one buffer may be specified"); return (GC_ERR); } if (ismotion != NULL) { v_emsg(sp, NULL, VIM_COMBUF); return (GC_ERR); } KEY(vp->buffer, 0); F_SET(vp, VC_BUFFER); KEY(key, EC_MAPCOMMAND); } /* Check for an OOB command key. */ cpart = ISPARTIAL; if (key > MAXVIKEY) { v_emsg(sp, KEY_NAME(sp, key), VIM_NOCOM); return (GC_ERR); } kp = &vikeys[vp->key = key]; /* * !!! * Historically, D accepted and then ignored a count. Match it. */ if (vp->key == 'D' && F_ISSET(vp, VC_C1SET)) { *comcountp = 0; vp->count = 0; F_CLR(vp, VC_C1SET); } /* Check for command aliases. */ if (kp->func == NULL && (kp = v_alias(sp, vp, kp)) == NULL) return (GC_ERR); /* The tildeop option makes the ~ command take a motion. */ if (key == '~' && O_ISSET(sp, O_TILDEOP)) kp = &tmotion; vp->kp = kp; /* * Find the command. The only legal command with no underlying * function is dot. It's historic practice that <escape> doesn't * just erase the preceding number, it beeps the terminal as well. * It's a common problem, so just beep the terminal unless verbose * was set. */ if (kp->func == NULL) { if (key != '.') { v_emsg(sp, KEY_NAME(sp, key), ev.e_value == K_ESCAPE ? VIM_NOCOM_B : VIM_NOCOM); return (GC_ERR); } /* If called for a motion command, stop now. */ if (dp == NULL) goto usage; /* * !!! * If a '.' is immediately entered after an undo command, we * replay the log instead of redoing the last command. This * is necessary because 'u' can't set the dot command -- see * vi/v_undo.c:v_undo for details. */ if (VIP(sp)->u_ccnt == sp->ccnt) { vp->kp = &vikeys['u']; F_SET(vp, VC_ISDOT); return (GC_OK); } /* Otherwise, a repeatable command must have been executed. */ if (!F_ISSET(dp, VC_ISDOT)) { msgq(sp, M_ERR, "208|No command to repeat"); return (GC_ERR); } /* Set new count/buffer, if any, and return. */ if (F_ISSET(vp, VC_C1SET)) { F_SET(dp, VC_C1SET); dp->count = vp->count; } if (F_ISSET(vp, VC_BUFFER)) dp->buffer = vp->buffer; *vp = *dp; return (GC_OK); } /* Set the flags based on the command flags. */ flags = kp->flags; /* Check for illegal count. */ if (F_ISSET(vp, VC_C1SET) && !LF_ISSET(V_CNT)) goto usage; /* Illegal motion command. */ if (ismotion == NULL) { /* Illegal buffer. */ if (!LF_ISSET(V_OBUF) && F_ISSET(vp, VC_BUFFER)) goto usage; /* Required buffer. */ if (LF_ISSET(V_RBUF)) { KEY(vp->buffer, 0); F_SET(vp, VC_BUFFER); } } /* * Special case: '[', ']' and 'Z' commands. Doesn't the fact that * the *single* characters don't mean anything but the *doubled* * characters do, just frost your shorts? */ if (vp->key == '[' || vp->key == ']' || vp->key == 'Z') { /* * Historically, half entered [[, ]] or Z commands weren't * cancelled by <escape>, the terminal was beeped instead. * POSIX.2-1992 probably didn't notice, and requires that * they be cancelled instead of beeping. Seems fine to me. * * Don't set the EC_MAPCOMMAND flag, apparently ] is a popular * vi meta-character, and we don't want the user to wait while * we time out a possible mapping. This *appears* to match * historic vi practice, but with mapping characters, You Just * Never Know. */ KEY(key, 0); if (vp->key != key) { usage: if (ismotion == NULL) s = kp->usage; else if (ismotion->key == '~' && O_ISSET(sp, O_TILDEOP)) s = tmotion.usage; else s = vikeys[ismotion->key].usage; v_emsg(sp, s, VIM_USAGE); return (GC_ERR); } } /* Special case: 'z' command. */ if (vp->key == 'z') { KEY(vp->character, 0); if (ISDIGIT(vp->character)) { if (v_count(sp, vp->character, &vp->count2)) return (GC_ERR); F_SET(vp, VC_C2SET); KEY(vp->character, 0); } } /* * Commands that have motion components can be doubled to imply the * current line. */ if (ismotion != NULL && ismotion->key != key && !LF_ISSET(V_MOVE)) { msgq(sp, M_ERR, "210|%s may not be used as a motion command", KEY_NAME(sp, key)); return (GC_ERR); } /* Pick up required trailing character. */ if (LF_ISSET(V_CHAR)) KEY(vp->character, 0); /* Get any associated cursor word. */ if (F_ISSET(kp, V_KEYW) && v_curword(sp)) return (GC_ERR); return (GC_OK); esc: switch (cpart) { case COMMANDMODE: msgq(sp, M_BERR, "211|Already in command mode"); return (GC_ERR_NOFLUSH); case ISPARTIAL: break; case NOTPARTIAL: (void)sp->gp->scr_bell(sp); break; } return (GC_ERR); }
/* * v_increment -- [count]#[#+-] * Increment/decrement a keyword number. * * PUBLIC: int v_increment __P((SCR *, VICMD *)); */ int v_increment(SCR *sp, VICMD *vp) { enum nresult nret; u_long ulval; long change, ltmp, lval; size_t beg, blen, end, len, nlen, wlen; int base, isempty, rval; CHAR_T *ntype, nbuf[100]; CHAR_T *bp, *p, *t; /* Validate the operator. */ if (vp->character == '#') vp->character = '+'; if (vp->character != '+' && vp->character != '-') { v_emsg(sp, vp->kp->usage, VIM_USAGE); return (1); } /* If new value set, save it off, but it has to fit in a long. */ if (F_ISSET(vp, VC_C1SET)) { if (vp->count > LONG_MAX) { inc_err(sp, NUM_OVER); return (1); } change = vp->count; } else change = 1; /* Get the line. */ if (db_eget(sp, vp->m_start.lno, &p, &len, &isempty)) { if (isempty) goto nonum; return (1); } /* * Skip any leading space before the number. Getting a cursor word * implies moving the cursor to its beginning, if we moved, refresh * now. */ for (beg = vp->m_start.cno; beg < len && ISSPACE(p[beg]); ++beg); if (beg >= len) goto nonum; if (beg != vp->m_start.cno) { sp->cno = beg; (void)vs_refresh(sp, 0); } #undef ishex #define ishex(c) (ISXDIGIT(c)) #undef isoctal #define isoctal(c) ((c) >= '0' && (c) <= '7') /* * Look for 0[Xx], or leading + or - signs, guess at the base. * The character after that must be a number. Wlen is set to * the remaining characters in the line that could be part of * the number. */ wlen = len - beg; if (p[beg] == '0' && wlen > 2 && (p[beg + 1] == 'X' || p[beg + 1] == 'x')) { base = 16; end = beg + 2; if (!ishex(p[end])) goto decimal; ntype = p[beg + 1] == 'X' ? fmt[HEXC] : fmt[HEXL]; } else if (p[beg] == '0' && wlen > 1) { base = 8; end = beg + 1; if (!isoctal(p[end])) goto decimal; ntype = fmt[OCTAL]; } else if (wlen >= 1 && (p[beg] == '+' || p[beg] == '-')) { base = 10; end = beg + 1; ntype = fmt[SDEC]; if (!isdigit(p[end])) goto nonum; } else { decimal: base = 10; end = beg; ntype = fmt[DEC]; if (!isdigit(p[end])) { nonum: msgq(sp, M_ERR, "181|Cursor not in a number"); return (1); } } /* Find the end of the word, possibly correcting the base. */ while (++end < len) { switch (base) { case 8: if (isoctal(p[end])) continue; if (p[end] == '8' || p[end] == '9') { base = 10; ntype = fmt[DEC]; continue; } break; case 10: if (isdigit(p[end])) continue; break; case 16: if (ishex(p[end])) continue; break; default: abort(); /* NOTREACHED */ } break; } wlen = (end - beg); /* * XXX * If the line was at the end of the buffer, we have to copy it * so we can guarantee that it's NULL-terminated. We make the * buffer big enough to fit the line changes as well, and only * allocate once. */ GET_SPACE_RETW(sp, bp, blen, len + 50); if (end == len) { MEMMOVE(bp, &p[beg], wlen); bp[wlen] = '\0'; t = bp; } else t = &p[beg]; /* * Octal or hex deal in unsigned longs, everything else is done * in signed longs. */ if (base == 10) { if ((nret = nget_slong(&lval, t, NULL, 10)) != NUM_OK) goto err; ltmp = vp->character == '-' ? -change : change; if (lval > 0 && ltmp > 0 && !NPFITS(LONG_MAX, lval, ltmp)) { nret = NUM_OVER; goto err; } if (lval < 0 && ltmp < 0 && !NNFITS(LONG_MIN, lval, ltmp)) { nret = NUM_UNDER; goto err; } lval += ltmp; /* If we cross 0, signed numbers lose their sign. */ if (lval == 0 && ntype == fmt[SDEC]) ntype = fmt[DEC]; nlen = SPRINTF(nbuf, sizeof(nbuf), ntype, lval); } else { if ((nret = nget_uslong(&ulval, t, NULL, base)) != NUM_OK) goto err; if (vp->character == '+') { if (!NPFITS(ULONG_MAX, ulval, change)) { nret = NUM_OVER; goto err; } ulval += change; } else { if (ulval < change) { nret = NUM_UNDER; goto err; } ulval -= change; } /* Correct for literal "0[Xx]" in format. */ if (base == 16) wlen -= 2; nlen = SPRINTF(nbuf, sizeof(nbuf), ntype, wlen, ulval); } /* Build the new line. */ MEMMOVE(bp, p, beg); MEMMOVE(bp + beg, nbuf, nlen); MEMMOVE(bp + beg + nlen, p + end, len - beg - (end - beg)); len = beg + nlen + (len - beg - (end - beg)); nret = NUM_OK; rval = db_set(sp, vp->m_start.lno, bp, len); if (0) { err: rval = 1; inc_err(sp, nret); } if (bp != NULL) FREE_SPACEW(sp, bp, blen); return (rval); }