示例#1
0
void QgsGeometryValidator::validatePolygon( int idx, const QgsPolygon &polygon )
{
  // check if holes are inside polygon
  for ( int i = 1; !mStop && i < polygon.size(); i++ )
  {
    if ( !ringInRing( polygon[i], polygon[0] ) )
    {
      QString msg = QObject::tr( "ring %1 of polygon %2 not in exterior ring" ).arg( i ).arg( idx );
      QgsDebugMsg( msg );
      emit errorFound( QgsGeometry::Error( msg ) );
      mErrorCount++;
    }
  }

  // check holes for intersections
  for ( int i = 1; !mStop && i < polygon.size(); i++ )
  {
    for ( int j = i + 1; !mStop && j < polygon.size(); j++ )
    {
      checkRingIntersections( idx, i, polygon[i], idx, j, polygon[j] );
    }
  }

  // check if rings are self-intersecting
  for ( int i = 0; !mStop && i < polygon.size(); i++ )
  {
    validatePolyline( i, polygon[i], true );
  }
}
示例#2
0
void QgsGeometryValidator::run()
{
  mErrorCount = 0;
  QSettings settings;
  if ( settings.value( QStringLiteral( "/qgis/digitizing/validate_geometries" ), 1 ).toInt() == 2 )
  {
    char *r = nullptr;
    const GEOSGeometry *g0 = mG.asGeos();
    GEOSContextHandle_t handle = QgsGeometry::getGEOSHandler();
    if ( !g0 )
    {
      emit errorFound( QgsGeometry::Error( QObject::tr( "GEOS error:could not produce geometry for GEOS (check log window)" ) ) );
    }
    else
    {
      GEOSGeometry *g1 = nullptr;
      if ( GEOSisValidDetail_r( handle, g0, GEOSVALID_ALLOW_SELFTOUCHING_RING_FORMING_HOLE, &r, &g1 ) != 1 )
      {
        if ( g1 )
        {
          const GEOSCoordSequence *cs = GEOSGeom_getCoordSeq_r( handle, g1 );

          unsigned int n;
          if ( GEOSCoordSeq_getSize_r( handle, cs, &n ) && n == 1 )
          {
            double x, y;
            GEOSCoordSeq_getX_r( handle, cs, 0, &x );
            GEOSCoordSeq_getY_r( handle, cs, 0, &y );
            emit errorFound( QgsGeometry::Error( QObject::tr( "GEOS error:%1" ).arg( r ), QgsPoint( x, y ) ) );
            mErrorCount++;
          }

          GEOSGeom_destroy_r( handle, g1 );
        }
        else
        {
          emit errorFound( QgsGeometry::Error( QObject::tr( "GEOS error:%1" ).arg( r ) ) );
          mErrorCount++;
        }

        GEOSFree_r( handle, r );
      }
    }

    return;
  }

  QgsDebugMsg( "validation thread started." );

  QgsWkbTypes::Type flatType = QgsWkbTypes::flatType( mG.wkbType() );
  //if ( flatType == QgsWkbTypes::Point || flatType == QgsWkbTypes::MultiPoint )
  //    break;
  if ( flatType == QgsWkbTypes::LineString )
  {
    validatePolyline( 0, mG.asPolyline() );
  }
  else if ( flatType == QgsWkbTypes::MultiLineString )
  {
    QgsMultiPolyline mp = mG.asMultiPolyline();
    for ( int i = 0; !mStop && i < mp.size(); i++ )
      validatePolyline( i, mp[i] );
  }
  else if ( flatType == QgsWkbTypes::Polygon )
  {
    validatePolygon( 0, mG.asPolygon() );
  }
  else if ( flatType == QgsWkbTypes::MultiPolygon )
  {
    QgsMultiPolygon mp = mG.asMultiPolygon();
    for ( int i = 0; !mStop && i < mp.size(); i++ )
    {
      validatePolygon( i, mp[i] );
    }

    for ( int i = 0; !mStop && i < mp.size(); i++ )
    {
      if ( mp[i].isEmpty() )
      {
        emit errorFound( QgsGeometry::Error( QObject::tr( "polygon %1 has no rings" ).arg( i ) ) );
        mErrorCount++;
        continue;
      }

      for ( int j = i + 1;  !mStop && j < mp.size(); j++ )
      {
        if ( mp[j].isEmpty() )
          continue;

        if ( ringInRing( mp[i][0], mp[j][0] ) )
        {
          emit errorFound( QgsGeometry::Error( QObject::tr( "polygon %1 inside polygon %2" ).arg( i ).arg( j ) ) );
          mErrorCount++;
        }
        else if ( ringInRing( mp[j][0], mp[i][0] ) )
        {
          emit errorFound( QgsGeometry::Error( QObject::tr( "polygon %1 inside polygon %2" ).arg( j ).arg( i ) ) );
          mErrorCount++;
        }
        else
        {
          checkRingIntersections( i, 0, mp[i][0], j, 0, mp[j][0] );
        }
      }
    }
  }

  else if ( flatType == QgsWkbTypes::Unknown )
  {
    QgsDebugMsg( QObject::tr( "Unknown geometry type" ) );
    emit errorFound( QgsGeometry::Error( QObject::tr( "Unknown geometry type %1" ).arg( mG.wkbType() ) ) );
    mErrorCount++;
  }

  QgsDebugMsg( "validation finished." );

  if ( mStop )
  {
    emit errorFound( QgsGeometry::Error( QObject::tr( "Geometry validation was aborted." ) ) );
  }
  else if ( mErrorCount > 0 )
  {
    emit errorFound( QgsGeometry::Error( QObject::tr( "Geometry has %1 errors." ).arg( mErrorCount ) ) );
  }
#if 0
  else
  {
    emit errorFound( QgsGeometry::Error( QObject::tr( "Geometry is valid." ) ) );
  }
#endif
}
示例#3
0
void QgsGeometryValidator::run()
{
  mErrorCount = 0;
  switch ( mMethod )
  {
    case QgsGeometry::ValidatorGeos:
    {
      char *r = nullptr;
      geos::unique_ptr g0( mGeometry.exportToGeos() );
      GEOSContextHandle_t handle = QgsGeometry::getGEOSHandler();
      if ( !g0 )
      {
        emit errorFound( QgsGeometry::Error( QObject::tr( "GEOS error: could not produce geometry for GEOS (check log window)" ) ) );
      }
      else
      {
        GEOSGeometry *g1 = nullptr;
        char res = GEOSisValidDetail_r( handle, g0.get(), GEOSVALID_ALLOW_SELFTOUCHING_RING_FORMING_HOLE, &r, &g1 );
        if ( res != 1 )
        {
          if ( g1 )
          {
            const GEOSCoordSequence *cs = GEOSGeom_getCoordSeq_r( handle, g1 );

            unsigned int n;
            if ( GEOSCoordSeq_getSize_r( handle, cs, &n ) && n == 1 )
            {
              double x, y;
              GEOSCoordSeq_getX_r( handle, cs, 0, &x );
              GEOSCoordSeq_getY_r( handle, cs, 0, &y );
              emit errorFound( QgsGeometry::Error( QObject::tr( "GEOS error: %1" ).arg( r ), QgsPointXY( x, y ) ) );
              mErrorCount++;
            }

            GEOSGeom_destroy_r( handle, g1 );
          }
          else
          {
            emit errorFound( QgsGeometry::Error( QObject::tr( "GEOS error: %1" ).arg( r ) ) );
            mErrorCount++;
          }

          GEOSFree_r( handle, r );
        }
      }

      break;
    }

    case QgsGeometry::ValidatorQgisInternal:
    {
      QgsWkbTypes::Type flatType = QgsWkbTypes::flatType( mGeometry.wkbType() );
      //if ( flatType == QgsWkbTypes::Point || flatType == QgsWkbTypes::MultiPoint )
      //    break;
      if ( flatType == QgsWkbTypes::LineString )
      {
        validatePolyline( 0, mGeometry.asPolyline() );
      }
      else if ( flatType == QgsWkbTypes::MultiLineString )
      {
        QgsMultiPolylineXY mp = mGeometry.asMultiPolyline();
        for ( int i = 0; !mStop && i < mp.size(); i++ )
          validatePolyline( i, mp[i] );
      }
      else if ( flatType == QgsWkbTypes::Polygon )
      {
        validatePolygon( 0, mGeometry.asPolygon() );
      }
      else if ( flatType == QgsWkbTypes::MultiPolygon )
      {
        QgsMultiPolygonXY mp = mGeometry.asMultiPolygon();
        for ( int i = 0; !mStop && i < mp.size(); i++ )
        {
          validatePolygon( i, mp[i] );
        }

        for ( int i = 0; !mStop && i < mp.size(); i++ )
        {
          if ( mp[i].isEmpty() )
          {
            emit errorFound( QgsGeometry::Error( QObject::tr( "polygon %1 has no rings" ).arg( i ) ) );
            mErrorCount++;
            continue;
          }

          for ( int j = i + 1;  !mStop && j < mp.size(); j++ )
          {
            if ( mp[j].isEmpty() )
              continue;

            if ( ringInRing( mp[i][0], mp[j][0] ) )
            {
              emit errorFound( QgsGeometry::Error( QObject::tr( "polygon %1 inside polygon %2" ).arg( i ).arg( j ) ) );
              mErrorCount++;
            }
            else if ( ringInRing( mp[j][0], mp[i][0] ) )
            {
              emit errorFound( QgsGeometry::Error( QObject::tr( "polygon %1 inside polygon %2" ).arg( j ).arg( i ) ) );
              mErrorCount++;
            }
            else
            {
              checkRingIntersections( i, 0, mp[i][0], j, 0, mp[j][0] );
            }
          }
        }
      }

      else if ( flatType == QgsWkbTypes::Unknown )
      {
        QgsDebugMsg( QObject::tr( "Unknown geometry type" ) );
        emit errorFound( QgsGeometry::Error( QObject::tr( "Unknown geometry type %1" ).arg( mGeometry.wkbType() ) ) );
        mErrorCount++;
      }

      if ( mStop )
      {
        emit errorFound( QgsGeometry::Error( QObject::tr( "Geometry validation was aborted." ) ) );
      }
      else if ( mErrorCount > 0 )
      {
        emit errorFound( QgsGeometry::Error( QObject::tr( "Geometry has %1 errors." ).arg( mErrorCount ) ) );
      }
#if 0
      else
      {
        emit errorFound( QgsGeometry::Error( QObject::tr( "Geometry is valid." ) ) );
      }
#endif
      break;
    }
  }
}