/* init framebuffer */
static PSD
fb_open (PSD psd)
{
vesa_mode_info_t mi;
vesa_display_t display;
PSUBDRIVER subdriver;
unsigned short mode;
#if MWPIXEL_FORMAT == MWPF_TRUECOLOR565
psd->bpp = 16;
#elif MWPIXEL_FORMAT == MWPF_TRUECOLOR888
psd->bpp = 24;
#elif MWPIXEL_FORMAT == MWPF_TRUECOLOR0888
psd->bpp = 32;
#elif MWPIXEL_FORMAT == MWPF_TRUECOLOR8888
psd->bpp = 32;
#else
#error Incorrect value of MWPIXEL_FORMAT!
#endif
mode = 0;
if (vesa_get_display_info (&display)) {
display_x_centimeters = display.max_x;
display_y_centimeters = display.max_y;
if (display.misc & VESA_MISC_1ST_DETAIL) {
/* Get preferred display resolution. */
psd->xres = display.detailed_modes[0].xres;
psd->yres = display.detailed_modes[0].yres;
mode = find_mode (psd->xres, psd->yres, psd->bpp, &mi);
}
}
if (! mode) {
psd->xres = DEFAULT_WIDTH;
psd->yres = DEFAULT_HEIGHT;
mode = find_mode (psd->xres, psd->yres, psd->bpp, &mi);
}
if (! mode) {
debug_printf ("No %d x %d x %d resolution found.\n",
psd->xres, psd->yres, psd->bpp);
return 0;
}
psd->xvirtres = psd->xres;
psd->yvirtres = psd->yres;
psd->planes = 1;
psd->ncolors = (psd->bpp >= 24) ? (1 << 24) : (1 << psd->bpp);
psd->linelen = mi.bytes_per_scan_line;
psd->addr = (void*) mi.phys_base_ptr;
psd->flags = PSF_SCREEN | PSF_HAVEBLIT;
switch (psd->bpp) {
case 16:
psd->flags |= PSF_HAVEOP_COPY;
psd->pixtype = MWPF_TRUECOLOR565;
break;
case 24:
psd->pixtype = MWPF_TRUECOLOR888;
break;
case 32:
#if MWPIXEL_FORMAT == MWPF_TRUECOLOR8888
psd->pixtype = MWPF_TRUECOLOR8888;
#else
psd->pixtype = MWPF_TRUECOLOR0888;
#endif
break;
default:
debug_printf ("Unsupported %d color (%d bpp) truecolor framebuffer\n",
psd->ncolors, psd->bpp);
return 0;
}
/* select a framebuffer subdriver based on planes and bpp */
subdriver = select_fb_subdriver (psd);
if (! subdriver) {
debug_printf ("No driver for screen bpp %d\n", psd->bpp);
return 0;
}
old_mode = vesa_get_mode ();
vesa_set_mode (mode | 0x4000); /* linear */
/*
* set and initialize subdriver into screen driver
* psd->size is calculated by subdriver init
*/
if (! set_subdriver (psd, subdriver, TRUE)) {
vesa_set_mode (old_mode);
debug_printf ("Driver initialize failed bpp %d\n", psd->bpp);
return 0;
}
/* Redirect debug_printf() output. */
debug_redirect (debug_putchar_graphics, (void*) psd);
return psd;
}
void show_logo(void)
{
uint16_t ebda_seg = read_word(0x0040,0x000E);
uint8_t f12_pressed = 0;
uint8_t scode;
uint16_t tmp, i;
LOGOHDR *logo_hdr = 0;
uint8_t is_fade_in, is_fade_out, uBootMenu;
uint16_t logo_time;
uint16_t old_mode;
// Set PIT to 1ms ticks
wait_init();
// Get main signature
tmp = read_logo_word((uint8_t)&logo_hdr->u16Signature);
if (tmp != 0x66BB)
goto done;
// If there is no VBE, just skip this
if (vesa_get_mode(&old_mode) != 0x004f )
goto done;
// Get options
is_fade_in = read_logo_byte((uint8_t)&logo_hdr->fu8FadeIn);
is_fade_out = read_logo_byte((uint8_t)&logo_hdr->fu8FadeOut);
logo_time = read_logo_word((uint8_t)&logo_hdr->u16LogoMillies);
uBootMenu = read_logo_byte((uint8_t)&logo_hdr->fu8ShowBootMenu);
// Is Logo disabled?
if (!is_fade_in && !is_fade_out && !logo_time)
goto done;
// Set video mode #0x142 640x480x32bpp
vesa_set_mode(0x142);
if (is_fade_in)
{
for (i = 0; i <= LOGO_SHOW_STEPS; i++)
{
outw(LOGO_IO_PORT, LOGO_CMD_SHOW_BMP | i);
scode = wait(16 / WAIT_MS, 0);
if (scode == F12_SCAN_CODE)
{
f12_pressed = 1;
break;
}
}
}
else
outw(LOGO_IO_PORT, LOGO_CMD_SHOW_BMP | LOGO_SHOW_STEPS);
// Wait (interval in milliseconds)
if (!f12_pressed)
{
scode = wait(logo_time / WAIT_MS, 1);
if (scode == F12_SCAN_CODE)
f12_pressed = 1;
}
// Fade out (only if F12 was not pressed)
if (is_fade_out && !f12_pressed)
{
for (i = LOGO_SHOW_STEPS; i > 0 ; i--)
{
outw(LOGO_IO_PORT, LOGO_CMD_SHOW_BMP | i);
scode = wait(16 / WAIT_MS, 0);
if (scode == F12_SCAN_CODE)
{
f12_pressed = 1;
break;
}
}
}
done:
// Clear forced boot drive setting.
write_byte(ebda_seg, (uint16_t)&EbdaData->uForceBootDevice, 0);
// Don't restore previous video mode
// The default text mode should be set up. (defect @bugref{1235})
set_mode(0x0003);
// If Setup menu enabled
if (uBootMenu)
{
// If the graphics logo disabled
if (!is_fade_in && !is_fade_out && !logo_time)
{
if (uBootMenu == 2)
printf("Press F12 to select boot device.\n");
// if the user has pressed F12 don't wait here
if (!f12_pressed)
{
// Wait for timeout or keystroke
scode = wait(F12_WAIT_TIME, 1);
if (scode == F12_SCAN_CODE)
f12_pressed = 1;
}
}
// If F12 pressed, show boot menu
if (f12_pressed)
{
uint8_t boot_device = 0;
uint8_t boot_drive = 0;
clear_screen();
// Show menu. Note that some versions of bcc freak out if we split these strings.
printf("\nVirtualBox temporary boot device selection\n\nDetected Hard disks:\n\n");
print_detected_harddisks();
printf("\nOther boot devices:\n f) Floppy\n c) CD-ROM\n l) LAN\n\n b) Continue booting\n");
// Wait for keystroke
for (;;)
{
do
{
scode = wait(WAIT_HZ, 1);
} while (scode == 0);
if (scode == 0x30)
{
// 'b' ... continue
break;
}
// Check if hard disk was selected
if ((scode >= 0x02) && (scode <= 0x09))
{
boot_drive = get_boot_drive(scode);
/*
* 0xff indicates that there is no mapping
* from the scan code to a hard drive.
* Wait for next keystroke.
*/
if (boot_drive == 0xff)
continue;
write_byte(ebda_seg, (uint16_t)&EbdaData->uForceBootDrive, boot_drive);
boot_device = 0x02;
break;
}
switch (scode)
{
case 0x21:
// Floppy
boot_device = 0x01;
break;
case 0x2e:
// CD-ROM
boot_device = 0x03;
break;
case 0x26:
// LAN
boot_device = 0x04;
break;
}
if (boot_device != 0)
break;
}
write_byte(ebda_seg, (uint16_t)&EbdaData->uForceBootDevice, boot_device);
// Switch to text mode. Clears screen and enables cursor again.
set_mode(0x0003);
}
}
// Restore PIT ticks
wait_uninit();
return;
}