EditHouseDialog::EditHouseDialog(wxWindow* parent, Map* map, House* house) :
wxDialog(parent, wxID_ANY, wxT("House"), wxDefaultPosition, wxSize(250,160)),
map(map),
what_house(house)
{
ASSERT(map);
ASSERT(house);
// Create topsizer
wxSizer* sizer = newd wxBoxSizer(wxVERTICAL);
wxSizer* tmpsizer;
house_name = wxstr(house->name);
house_id = i2ws(house->id);
house_rent = i2ws(house->rent);
// House options
tmpsizer = newd wxStaticBoxSizer(wxHORIZONTAL, this, wxT("Name"));
name_field = newd wxTextCtrl(this, wxID_ANY, wxT(""), wxDefaultPosition, wxSize(230,20), 0, wxTextValidator(wxFILTER_ASCII, &house_name));
tmpsizer->Add(name_field);
sizer->Add(tmpsizer, wxSizerFlags().Border(wxALL, 20));
tmpsizer = newd wxStaticBoxSizer(wxHORIZONTAL, this, wxT("Rent / ID"));
rent_field = newd wxTextCtrl(this, wxID_ANY, wxT(""), wxDefaultPosition, wxSize(160,20), 0, wxTextValidator(wxFILTER_NUMERIC, &house_rent));
tmpsizer->Add(rent_field);
id_field = newd wxTextCtrl(this, wxID_ANY, wxT(""), wxDefaultPosition, wxSize(70,20), 0, wxTextValidator(wxFILTER_NUMERIC, &house_id));
id_field->Enable(false);
tmpsizer->Add(id_field);
sizer->Add(tmpsizer, wxSizerFlags().Border(wxALL, 20));
// House options
guildhall_field = newd wxCheckBox(this, wxID_ANY, wxT("Guildhall"), wxDefaultPosition);
sizer->Add(guildhall_field, wxSizerFlags().Border(wxRIGHT | wxLEFT | wxBOTTOM, 20));
guildhall_field->SetValue(house->guildhall);
// OK/Cancel buttons
tmpsizer = newd wxBoxSizer(wxHORIZONTAL);
tmpsizer->Add(newd wxButton(this, wxID_OK, wxT("OK")), wxSizerFlags(1).Center());
tmpsizer->Add(newd wxButton(this, wxID_CANCEL, wxT("Cancel")), wxSizerFlags(1).Center());
sizer->Add(tmpsizer, wxSizerFlags(1).Center().Border(wxRIGHT | wxLEFT | wxBOTTOM, 20));
SetSizerAndFit(sizer);
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Key Bindings"), 1);
{
S.StartHorizontalLay(wxALIGN_CENTRE, false);
{
S.Id(CategoryID);
mCat = S.AddChoice(_("C&ategory:"),
mCats[0],
&mCats);
}
S.EndHorizontalLay();
mList = S.Id(CommandsListID).AddListControlReportMode();
mList->SetName(_("Key Bindings"));
S.StartThreeColumn();
{
if (!mKey) {
mKey = safenew wxTextCtrl(this,
CurrentComboID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1));
#else
wxSize(210, -1));
#endif
mKey->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnCaptureKeyDown));
mKey->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnCaptureChar));
}
S.AddWindow(mKey);
/* i18n-hint: (verb)*/
S.Id(SetButtonID).AddButton(_("Set"));
S.Id(ClearButtonID).AddButton(_("Cl&ear"));
}
S.EndThreeColumn();
#if defined(__WXMAC__)
S.AddFixedText(_("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartThreeColumn();
{
S.Id(ImportButtonID).AddButton(_("&Import..."));
S.Id(ExportButtonID).AddButton(_("&Export..."));
S.Id(AssignDefaultsButtonID).AddButton(_("&Defaults"));
}
S.EndThreeColumn();
}
DatDebugView::DatDebugView(wxWindow* parent) : wxPanel(parent)
{
wxSizer* sizer = newd wxBoxSizer(wxVERTICAL);
search_field = newd wxTextCtrl(this, wxID_ANY, wxT(""), wxDefaultPosition, wxDefaultSize);
search_field->SetFocus();
sizer->Add(search_field, 0, wxEXPAND, 2);
item_list = newd DatDebugViewListBox(this, wxID_ANY);
item_list->SetMinSize(wxSize(470, 400));
sizer->Add(item_list, 1, wxEXPAND | wxALL, 2);
SetSizerAndFit(sizer);
}
void GUI::ShowTextBox(wxWindow* parent, wxString title, wxString content)
{
wxDialog* dlg = newd wxDialog(parent, wxID_ANY, title, wxDefaultPosition, wxDefaultSize, wxRESIZE_BORDER | wxCAPTION | wxCLOSE_BOX);
wxSizer* topsizer = newd wxBoxSizer(wxVERTICAL);
wxTextCtrl* text_field = newd wxTextCtrl(dlg, wxID_ANY, content, wxDefaultPosition, wxDefaultSize, wxTE_MULTILINE | wxTE_READONLY);
text_field->SetMinSize(wxSize(400, 550));
topsizer->Add(text_field, wxSizerFlags(5).Expand());
wxSizer* choicesizer = newd wxBoxSizer(wxHORIZONTAL);
choicesizer->Add(newd wxButton(dlg, wxID_CANCEL, wxT("OK")), wxSizerFlags(1).Center());
topsizer->Add(choicesizer, wxSizerFlags(0).Center());
dlg->SetSizerAndFit(topsizer);
dlg->ShowModal();
}
CRefSelDlg::CRefSelDlg(wxWindow* pParent, wxString wxRefType) : wxDialog(pParent, wxID_ANY, wxT("Ref Select"), wxDefaultPosition, wxSize(600, 300), wxDEFAULT_DIALOG_STYLE|wxMINIMIZE_BOX|wxMAXIMIZE_BOX|wxRESIZE_BORDER)
{
m_pTextCtrl = ZION_NEW wxTextCtrl(this, ID_REF_TEXT, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxTE_LEFT);
wxBoxSizer* pSizer2 = ZION_NEW wxBoxSizer(wxHORIZONTAL);
pSizer2->AddStretchSpacer();
pSizer2->Add(ZION_NEW wxButton(this, wxID_OK, wxT("Confirm")), 0, wxALIGN_RIGHT | wxALL, 5);
pSizer2->Add(ZION_NEW wxButton(this, wxID_CANCEL, wxT("Cancel")), 0, wxALIGN_RIGHT | wxALL, 5);
wxBoxSizer* pSizer1 = ZION_NEW wxBoxSizer(wxVERTICAL);
pSizer1->Add(m_pTextCtrl, 0, wxGROW|wxALIGN_CENTER_VERTICAL|wxALL, 5);
m_pUUIDList = ZION_NEW wxListCtrl(this, ID_REF_LIST, wxDefaultPosition, wxDefaultSize, wxLC_REPORT);
pSizer1->Add(m_pUUIDList, 1, wxGROW|wxALIGN_CENTER_VERTICAL|wxALL, 5);
pSizer1->Add(pSizer2, 0, wxGROW|wxALIGN_CENTER_VERTICAL);
SetSizer(pSizer1);
m_strRefType = wxRefType;
m_pUUIDList->InsertColumn(0, wxT("Name"), 0, 120);
m_pUUIDList->InsertColumn(1, wxT("UUID"), 0, 800);
AppendItem(m_strRefType);
}
void TreeGeneratorFrame::createWxCtrls()
{
// menu
SetIcon(wxIcon(L"./Assets/Icons/Zee.xpm", wxBITMAP_TYPE_XPM));
wxMenu* menuFile = New wxMenu;
menuFile->Append(ID_MENU_OPEN, L"&Open");
menuFile->Append(ID_MENU_SAVE, L"&Save");
wxMenuBar* menuBar = New wxMenuBar;
menuBar->Append(menuFile, L"&File");
SetMenuBar(menuBar);
// wnd
wxBoxSizer* boxSizer1 = New wxBoxSizer(wxHORIZONTAL);
// left
mCtrlsPanel = New wxScrolledWindow(this, -1, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
mCtrlsPanel->SetScrollRate(0, 5);
wxBoxSizer* boxSizer2 = New wxBoxSizer(wxVERTICAL);
// -- generalParams
mPanelGeneralParams = New wxCollapsiblePane(mCtrlsPanel, ID_GENERAL_PARAMS, L"General Params");
wxWindow* generalParamsWnd = mPanelGeneralParams->GetPane();
wxFlexGridSizer* fgSizer1 = New wxFlexGridSizer(2, 2, 0, 0);
fgSizer1->SetFlexibleDirection(wxBOTH);
fgSizer1->SetNonFlexibleGrowMode(wxFLEX_GROWMODE_SPECIFIED);
wxStaticText* textLevels = New wxStaticText(generalParamsWnd, -1, L"Levels");
mSpinLevels = New wxSpinCtrl(generalParamsWnd, -1, wxEmptyString, wxDefaultPosition, wxDefaultSize,
wxSP_ARROW_KEYS, 0, 5, 1);
wxStaticText* textScale = New wxStaticText(generalParamsWnd, -1, L"Scale");
mTextScale = New wxTextCtrl(generalParamsWnd, -1, L"10.0", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textScaleV = New wxStaticText(generalParamsWnd, -1, L"ScaleV");
mTextScaleV = New wxTextCtrl(generalParamsWnd, -1, L"0", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textBaseSize = New wxStaticText(generalParamsWnd, -1, L"BaseSize");
mTextBaseSize = New wxTextCtrl(generalParamsWnd, -1, L"0", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textRadiusRatio = New wxStaticText(generalParamsWnd, -1, L"RadiusRatio");
mTextRadiusRatio = New wxTextCtrl(generalParamsWnd, -1, L"0.02", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textRatioPower = New wxStaticText(generalParamsWnd, -1, L"RatioPower");
mTextRatioPower = New wxTextCtrl(generalParamsWnd, -1, L"1", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textShape = New wxStaticText(generalParamsWnd, -1, L"Shape");
mSpinShape = New wxSpinCtrl(generalParamsWnd, -1, wxEmptyString, wxDefaultPosition, wxDefaultSize,
wxSP_ARROW_KEYS, 0, 10, 0);
wxStaticText* textBaseSplits = New wxStaticText(generalParamsWnd, -1, L"BaseSplits");
mSpinBaseSplits = New wxSpinCtrl(generalParamsWnd, -1, wxEmptyString, wxDefaultPosition, wxDefaultSize,
wxSP_ARROW_KEYS, 0, 10, 0);
fgSizer1->Add(textLevels, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer1->Add(mSpinLevels, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer1->Add(textScale, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer1->Add(mTextScale, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer1->Add(textScaleV, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer1->Add(mTextScaleV, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer1->Add(textBaseSize, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer1->Add(mTextBaseSize, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer1->Add(textRadiusRatio, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer1->Add(mTextRadiusRatio, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer1->Add(textRatioPower, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer1->Add(mTextRatioPower, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer1->Add(textShape, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer1->Add(mSpinShape, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer1->Add(textBaseSplits, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer1->Add(mSpinBaseSplits, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
generalParamsWnd->SetSizer(fgSizer1);
generalParamsWnd->Layout();
generalParamsWnd->Fit();
// -- LevelParams
mPanelLevelParmas0 = New wxCollapsiblePane(mCtrlsPanel, ID_GENERAL_PARAMS, L"Level Params");
wxWindow* levelParamsWnd = mPanelLevelParmas0->GetPane();
wxFlexGridSizer* fgSizer2 = New wxFlexGridSizer(2, 2, 0, 0);
fgSizer2->SetFlexibleDirection(wxBOTH);
fgSizer2->SetNonFlexibleGrowMode(wxFLEX_GROWMODE_SPECIFIED);
wxStaticText* textLevel = New wxStaticText(levelParamsWnd, -1, L"Level");
//mSpinLevel = new wxSpinCtrl(levelParamsWnd0, -1, wxEmptyString, wxDefaultPosition, wxDefaultSize,
// wxSP_ARROW_KEYS, 0, 10, 0);
wxArrayString choices;
choices.Add(wxT("0"));
mChoiceLevel = New wxChoice(levelParamsWnd, -1, wxDefaultPosition, wxDefaultSize, choices);
mChoiceLevel->SetSelection(0);
mSelectedLevel = 0;
wxStaticText* textSegSegsW = New wxStaticText(levelParamsWnd, -1, L"SegSegsW");
mSpinSegSegsW = New wxSpinCtrl(levelParamsWnd, -1, wxEmptyString, wxDefaultPosition, wxDefaultSize,
wxSP_ARROW_KEYS, 0, 100, 8);
wxStaticText* textSegSegsH = New wxStaticText(levelParamsWnd, -1, L"SegSegsH");
mSpinSegSegsH = New wxSpinCtrl(levelParamsWnd, -1, wxEmptyString, wxDefaultPosition, wxDefaultSize,
wxSP_ARROW_KEYS, 0, 100, 4);
wxStaticText* textLength = New wxStaticText(levelParamsWnd, -1, L"Length");
mTextLength = New wxTextCtrl(levelParamsWnd, -1, L"1.0", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textLengthV = New wxStaticText(levelParamsWnd, -1, L"LengthV");
mTextLengthV = New wxTextCtrl(levelParamsWnd, -1, L"0", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textTaper = New wxStaticText(levelParamsWnd, -1, L"Taper");
mTextTaper = New wxTextCtrl(levelParamsWnd, -1, L"1", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textCurveRes = New wxStaticText(levelParamsWnd, -1, L"CurveRes");
mSpinCurveRes = New wxSpinCtrl(levelParamsWnd, -1, wxEmptyString, wxDefaultPosition, wxDefaultSize,
wxSP_ARROW_KEYS, 0, 100, 3);
wxStaticText* textCurve = New wxStaticText(levelParamsWnd, -1, L"Curve");
mTextCurve = New wxTextCtrl(levelParamsWnd, -1, L"0", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textCurveV = New wxStaticText(levelParamsWnd, -1, L"CurveV");
mTextCurveV = New wxTextCtrl(levelParamsWnd, -1, L"0", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textCurveBack = New wxStaticText(levelParamsWnd, -1, L"CurveBack");
mTextCurveBack = New wxTextCtrl(levelParamsWnd, -1, L"0", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textSegSplits = New wxStaticText(levelParamsWnd, -1, L"SegSplits");
mTextSegSplits = New wxTextCtrl(levelParamsWnd, -1, L"0", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textSplitAngle = New wxStaticText(levelParamsWnd, -1, L"SplitAngle");
mTextSplitAngle = New wxTextCtrl(levelParamsWnd, -1, L"0", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textSplitAngleV = New wxStaticText(levelParamsWnd, -1, L"SplitAngleV");
mTextSplitAngleV = New wxTextCtrl(levelParamsWnd, -1, L"0", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textBranches = New wxStaticText(levelParamsWnd, -1, L"Branches");
mSpinBranches = New wxSpinCtrl(levelParamsWnd, -1, wxEmptyString, wxDefaultPosition, wxDefaultSize,
wxSP_ARROW_KEYS, 0, 100, 0);
wxStaticText* textDownAngle = New wxStaticText(levelParamsWnd, -1, L"DownAngle");
mTextDownAngle = New wxTextCtrl(levelParamsWnd, -1, L"0", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textDownAngleV = New wxStaticText(levelParamsWnd, -1, L"DownAngleV");
mTextDownAngleV = New wxTextCtrl(levelParamsWnd, -1, L"0", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textRotateAngle = New wxStaticText(levelParamsWnd, -1, L"RotateAngle");
mTextRotateAngle = New wxTextCtrl(levelParamsWnd, -1, L"0", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
wxStaticText* textRotateAngleV = New wxStaticText(levelParamsWnd, -1, L"RotateAngleV");
mTextRotateAngleV = New wxTextCtrl(levelParamsWnd, -1, L"0", wxDefaultPosition, wxDefaultSize, 0,
wxTextValidator(wxFILTER_NUMERIC));
fgSizer2->Add(textLevel, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mChoiceLevel, 0, wxALL | wxALIGN_CENTER_VERTICAL | wxEXPAND, 5);
fgSizer2->Add(textSegSegsW, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mSpinSegSegsW, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textSegSegsH, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mSpinSegSegsH, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textLength, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mTextLength, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textLengthV, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mTextLengthV, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textTaper, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mTextTaper, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textCurveRes, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mSpinCurveRes, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textCurve, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mTextCurve, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textCurveV, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mTextCurveV, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textCurveBack, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mTextCurveBack, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textSegSplits, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mTextSegSplits, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textSplitAngle, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mTextSplitAngle, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textSplitAngleV, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mTextSplitAngleV, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textBranches, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mSpinBranches, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textDownAngle, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mTextDownAngle, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textDownAngleV, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mTextDownAngleV, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textRotateAngle, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mTextRotateAngle, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(textRotateAngleV, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
fgSizer2->Add(mTextRotateAngleV, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5);
levelParamsWnd->SetSizer(fgSizer2);
levelParamsWnd->Layout();
levelParamsWnd->Fit();
// button
mButtonGenerate = New wxButton(mCtrlsPanel, ID_BUTTON_GENERATE, L"Generate");
boxSizer2->Add(mPanelGeneralParams, 0, wxALL, 5);
boxSizer2->Add(mPanelLevelParmas0, 0, wxALL, 5);
boxSizer2->Add(mButtonGenerate, 0, wxALL, 5);
mCtrlsPanel->SetSizer(boxSizer2);
mCtrlsPanel->SetMinSize(wxSize(240, 600));
mCtrlsPanel->FitInside();
mCtrlsPanel->Layout();
// right
mCanvasPanel = New wxPanel(this, -1);
mCanvasPanel->SetMinSize(wxSize(480, 600));
boxSizer1->Add(mCtrlsPanel, 0, wxALL, 5);
boxSizer1->Add(mCanvasPanel, 0, wxALL, 5);
this->SetSizer(boxSizer1);
this->Layout();
this->Fit();
mSpinLevels->Connect(wxEVT_COMMAND_SPINCTRL_UPDATED, wxSpinEventHandler(TreeGeneratorFrame::OnSpinLevels), NULL, this);
mChoiceLevel->Connect(wxEVT_COMMAND_CHOICE_SELECTED, wxCommandEventHandler(TreeGeneratorFrame::OnChoiceLevel), NULL, this);
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Key Bindings"), 1);
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.StartHorizontalLay(wxALIGN_LEFT|wxALIGN_CENTER_VERTICAL, 0);
{
S.AddTitle(_("View by:"));
S.StartRadioButtonGroup(wxT("/Prefs/KeyConfig/ViewBy"), wxT("tree"));
{
mViewByTree = S.Id(ViewByTreeID).TieRadioButton(_("&Tree"), wxT("tree"));
mViewByTree->SetName(_("View by tree"));
mViewByName = S.Id(ViewByNameID).TieRadioButton(_("&Name"), wxT("name"));
mViewByName->SetName(_("View by name"));
mViewByKey = S.Id(ViewByKeyID).TieRadioButton(_("&Key"), wxT("key"));
mViewByKey->SetName(_("View by key"));
}
S.EndRadioButtonGroup();
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_CENTER|wxALIGN_CENTER_VERTICAL, 0);
{
// just a spacer
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 0);
{
mFilterLabel = S.AddVariableText(_("Searc&h:"));
if (!mFilter) {
mFilter = safenew wxTextCtrl(this,
FilterID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1),
#else
wxSize(210, -1),
#endif
wxTE_PROCESS_ENTER);
mFilter->SetName(wxStripMenuCodes(mFilterLabel->GetLabel()));
mFilter->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnFilterKeyDown),
NULL,
this);
mFilter->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnFilterChar),
NULL,
this);
}
S.AddWindow(mFilter, wxALIGN_NOT | wxALIGN_LEFT);
}
S.EndHorizontalLay();
}
S.EndThreeColumn();
S.AddSpace(-1, 2);
S.StartHorizontalLay(wxEXPAND, 1);
{
if (!mView) {
mView = safenew KeyView(this, CommandsListID);
mView->SetName(_("Bindings"));
}
S.Prop(true);
S.AddWindow(mView, wxEXPAND);
}
S.EndHorizontalLay();
S.StartThreeColumn();
{
if (!mKey) {
mKey = safenew wxTextCtrl(this,
CurrentComboID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1),
#else
wxSize(210, -1),
#endif
wxTE_PROCESS_ENTER);
mKey->SetName(_("Short cut"));
mKey->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnHotkeyKeyDown),
NULL,
this);
mKey->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnHotkeyChar),
NULL,
this);
mKey->Connect(wxEVT_KILL_FOCUS,
wxFocusEventHandler(KeyConfigPrefs::OnHotkeyKillFocus),
NULL,
this);
}
S.AddWindow(mKey);
/* i18n-hint: (verb)*/
mSet = S.Id(SetButtonID).AddButton(_("&Set"));
mClear = S.Id(ClearButtonID).AddButton(_("Cl&ear"));
}
S.EndThreeColumn();
#if defined(__WXMAC__)
S.AddFixedText(_("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartThreeColumn();
{
S.Id(ImportButtonID).AddButton(_("&Import..."));
S.Id(ExportButtonID).AddButton(_("&Export..."));
S.Id(AssignDefaultsButtonID).AddButton(_("&Defaults"));
}
S.EndThreeColumn();
}
S.EndStatic();
// Need to layout so that the KeyView is properly sized before populating.
// Otherwise, the initial selection is not scrolled into view.
Layout();
}
