/* Mandatory */
Bool
LgPreInit(ScrnInfoPtr pScrn, int flags)
{
CirPtr pCir;
vgaHWPtr hwp;
MessageType from;
int i;
ClockRangePtr clockRanges;
int fbPCIReg, ioPCIReg;
char *s;
if (flags & PROBE_DETECT) {
cirProbeDDC( pScrn, xf86GetEntityInfo(pScrn->entityList[0])->index );
return TRUE;
}
#ifdef LG_DEBUG
ErrorF("LgPreInit\n");
#endif
/* Check the number of entities, and fail if it isn't one. */
if (pScrn->numEntities != 1)
return FALSE;
/* The vgahw module should be loaded here when needed */
if (!xf86LoadSubModule(pScrn, "vgahw"))
return FALSE;
xf86LoaderReqSymLists(vgahwSymbols, NULL);
/*
* Allocate a vgaHWRec
*/
if (!vgaHWGetHWRec(pScrn))
return FALSE;
hwp = VGAHWPTR(pScrn);
vgaHWGetIOBase(hwp);
/* Allocate the LgRec driverPrivate */
if (!LgGetRec(pScrn))
return FALSE;
pCir = CIRPTR(pScrn);
pCir->pScrn = pScrn;
pCir->PIOReg = hwp->PIOOffset + 0x3CE;
/* Get the entity, and make sure it is PCI. */
pCir->pEnt = xf86GetEntityInfo(pScrn->entityList[0]);
if (pCir->pEnt->location.type != BUS_PCI)
return FALSE;
pCir->Chipset = pCir->pEnt->chipset;
/* Find the PCI info for this screen */
pCir->PciInfo = xf86GetPciInfoForEntity(pCir->pEnt->index);
pCir->PciTag = pciTag(pCir->PciInfo->bus,
pCir->PciInfo->device,
pCir->PciInfo->func);
if (xf86LoadSubModule(pScrn, "int10")) {
xf86Int10InfoPtr int10InfoPtr;
xf86LoaderReqSymLists(int10Symbols, NULL);
int10InfoPtr = xf86InitInt10(pCir->pEnt->index);
if (int10InfoPtr)
xf86FreeInt10(int10InfoPtr);
}
/* Set pScrn->monitor */
pScrn->monitor = pScrn->confScreen->monitor;
/*
* The first thing we should figure out is the depth, bpp, etc.
* We support both 24bpp and 32bpp layouts, so indicate that.
*/
if (!xf86SetDepthBpp(pScrn, 0, 0, 0, Support24bppFb | Support32bppFb |
SupportConvert32to24 | PreferConvert32to24)) {
return FALSE;
}
/* Check that the returned depth is one we support */
switch (pScrn->depth) {
case 8:
case 15:
case 16:
case 24:
case 32:
/* OK */
break;
default:
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"Given depth (%d) is not supported by this driver\n", pScrn->depth);
return FALSE;
}
xf86PrintDepthBpp(pScrn);
/* Get the depth24 pixmap format */
if (pScrn->depth == 24 && pix24bpp == 0)
pix24bpp = xf86GetBppFromDepth(pScrn, 24);
/*
* This must happen after pScrn->display has been set because
* xf86SetWeight references it.
*/
if (pScrn->depth > 8) {
/* The defaults are OK for us */
rgb zeros = {0, 0, 0};
/* !!! I think we can force 5-6-5 weight for 16bpp here for
the 5462. */
if (!xf86SetWeight(pScrn, zeros, zeros)) {
return FALSE;
} else {
/* XXX check that weight returned is supported */
;
}
}
if (!xf86SetDefaultVisual(pScrn, -1))
return FALSE;
/* Collect all of the relevant option flags (fill in pScrn->options) */
xf86CollectOptions(pScrn, NULL);
/* Process the options */
if (!(pCir->Options = xalloc(sizeof(LgOptions))))
return FALSE;
memcpy(pCir->Options, LgOptions, sizeof(LgOptions));
xf86ProcessOptions(pScrn->scrnIndex, pScrn->options, pCir->Options);
pScrn->rgbBits = 6;
from = X_DEFAULT;
pCir->HWCursor = FALSE;
if (xf86GetOptValBool(pCir->Options, OPTION_HW_CURSOR, &pCir->HWCursor))
from = X_CONFIG;
xf86DrvMsg(pScrn->scrnIndex, from, "Using %s cursor\n",
pCir->HWCursor ? "HW" : "SW");
if (xf86ReturnOptValBool(pCir->Options, OPTION_NOACCEL, FALSE)) {
pCir->NoAccel = TRUE;
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Acceleration disabled\n");
}
if (pScrn->bitsPerPixel < 8) {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"Cannot use in less than 8 bpp\n");
return FALSE;
}
/*
* Set the ChipRev, allowing config file entries to
* override.
*/
if (pCir->pEnt->device->chipRev >= 0) {
pCir->ChipRev = pCir->pEnt->device->chipRev;
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "ChipRev override: %d\n",
pCir->ChipRev);
} else {
pCir->ChipRev = pCir->PciInfo->chipRev;
}
/* Cirrus swapped the FB and IO registers in the 5465 (by design). */
if (PCI_CHIP_GD5465 == pCir->Chipset) {
fbPCIReg = 0;
ioPCIReg = 1;
} else {
fbPCIReg = 1;
ioPCIReg = 0;
}
/* Find the frame buffer base address */
if (pCir->pEnt->device->MemBase != 0) {
/* Require that the config file value matches one of the PCI values. */
if (!xf86CheckPciMemBase(pCir->PciInfo, pCir->pEnt->device->MemBase)) {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"MemBase 0x%08lX doesn't match any PCI base register.\n",
pCir->pEnt->device->MemBase);
return FALSE;
}
pCir->FbAddress = pCir->pEnt->device->MemBase;
from = X_CONFIG;
} else {
if (pCir->PciInfo->memBase[fbPCIReg] != 0) {
pCir->FbAddress = pCir->PciInfo->memBase[fbPCIReg] & 0xff000000;
from = X_PROBED;
} else {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"No valid FB address in PCI config space\n");
LgFreeRec(pScrn);
return FALSE;
}
}
xf86DrvMsg(pScrn->scrnIndex, from, "Linear framebuffer at 0x%lX\n",
(unsigned long)pCir->FbAddress);
/* Find the MMIO base address */
if (pCir->pEnt->device->IOBase != 0) {
/* Require that the config file value matches one of the PCI values. */
if (!xf86CheckPciMemBase(pCir->PciInfo, pCir->pEnt->device->IOBase)) {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"IOBase 0x%08lX doesn't match any PCI base register.\n",
pCir->pEnt->device->IOBase);
return FALSE;
}
pCir->IOAddress = pCir->pEnt->device->IOBase;
from = X_CONFIG;
} else {
if (pCir->PciInfo->memBase[ioPCIReg] != 0) {
pCir->IOAddress = pCir->PciInfo->memBase[ioPCIReg] & 0xfffff000;
from = X_PROBED;
} else {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"No valid MMIO address in PCI config space\n");
}
}
xf86DrvMsg(pScrn->scrnIndex, from, "MMIO registers at 0x%lX\n",
(unsigned long)pCir->IOAddress);
/*
* If the user has specified the amount of memory in the XF86Config
* file, we respect that setting.
*/
if (pCir->pEnt->device->videoRam != 0) {
pScrn->videoRam = pCir->pEnt->device->videoRam;
from = X_CONFIG;
} else {
pScrn->videoRam = LgCountRam(pScrn);
from = X_PROBED;
}
if (2048 == pScrn->videoRam) {
/* Two-way interleaving */
pCir->chip.lg->memInterleave = 0x40;
} else if (4096 == pScrn->videoRam || 8192 == pScrn->videoRam) {
/* Four-way interleaving */
pCir->chip.lg->memInterleave = 0x80;
} else {
/* One-way interleaving */
pCir->chip.lg->memInterleave = 0x00;
}
xf86DrvMsg(pScrn->scrnIndex, from, "VideoRAM: %d kByte\n",
pScrn->videoRam);
pCir->FbMapSize = pScrn->videoRam * 1024;
pCir->IoMapSize = 0x4000; /* 16K for moment, will increase */
pScrn->racIoFlags = RAC_COLORMAP
#ifndef EXPERIMENTAL
| RAC_VIEWPORT
#endif
;
xf86SetOperatingState(resVgaMem, pCir->pEnt->index, ResUnusedOpr);
/* Register the PCI-assigned resources. */
if (xf86RegisterResources(pCir->pEnt->index, NULL, ResExclusive)) {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"xf86RegisterResources() found resource conflicts\n");
return FALSE;
}
if (!xf86LoadSubModule(pScrn, "ddc")) {
LgFreeRec(pScrn);
return FALSE;
}
xf86LoaderReqSymLists(ddcSymbols, NULL);
#if LGuseI2C
if (!xf86LoadSubModule(pScrn, "i2c")) {
LgFreeRec(pScrn);
return FALSE;
}
xf86LoaderReqSymLists(i2cSymbols, NULL);
#endif
/* Read and print the monitor DDC information */
pScrn->monitor->DDC = LgDoDDC(pScrn);
/* The gamma fields must be initialised when using the new cmap code */
if (pScrn->depth > 1) {
Gamma zeros = {0.0, 0.0, 0.0};
if (!xf86SetGamma(pScrn, zeros))
return FALSE;
}
if (xf86GetOptValBool(pCir->Options,
OPTION_SHADOW_FB,&pCir->shadowFB))
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "ShadowFB %s.\n",
pCir->shadowFB ? "enabled" : "disabled");
if ((s = xf86GetOptValString(pCir->Options, OPTION_ROTATE))) {
if(!xf86NameCmp(s, "CW")) {
/* accel is disabled below for shadowFB */
pCir->shadowFB = TRUE;
pCir->rotate = 1;
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
"Rotating screen clockwise - acceleration disabled\n");
} else if(!xf86NameCmp(s, "CCW")) {
pCir->shadowFB = TRUE;
pCir->rotate = -1;
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Rotating screen"
"counter clockwise - acceleration disabled\n");
} else {
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "\"%s\" is not a valid"
"value for Option \"Rotate\"\n", s);
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Valid options are \"CW\" or \"CCW\"\n");
}
}
if (pCir->shadowFB && !pCir->NoAccel) {
xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
"HW acceleration not supported with \"shadowFB\".\n");
pCir->NoAccel = TRUE;
}
if (pCir->rotate && pCir->HWCursor) {
xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
"HW cursor not supported with \"rotate\".\n");
pCir->HWCursor = FALSE;
}
/* We use a programmable clock */
pScrn->progClock = TRUE;
/* XXX Set HW cursor use */
/* Set the min pixel clock */
pCir->MinClock = 12000; /* XXX Guess, need to check this */
xf86DrvMsg(pScrn->scrnIndex, X_DEFAULT, "Min pixel clock is %d MHz\n",
pCir->MinClock / 1000);
/*
* If the user has specified ramdac speed in the XF86Config
* file, we respect that setting.
*/
if (pCir->pEnt->device->dacSpeeds[0]) {
ErrorF("Do not specify a Clocks line for Cirrus chips\n");
return FALSE;
} else {
int speed;
int *p;
switch (pCir->Chipset) {
case PCI_CHIP_GD5462:
p = gd5462_MaxClocks;
break;
case PCI_CHIP_GD5464:
case PCI_CHIP_GD5464BD:
p = gd5464_MaxClocks;
break;
case PCI_CHIP_GD5465:
p = gd5465_MaxClocks;
break;
default:
ErrorF("???\n");
return FALSE;
}
switch (pScrn->bitsPerPixel) {
case 8:
speed = p[1];
break;
case 15:
case 16:
speed = p[2];
break;
case 24:
speed = p[3];
break;
case 32:
speed = p[4];
break;
default:
/* Should not get here */
speed = 0;
break;
}
pCir->MaxClock = speed;
from = X_PROBED;
}
xf86DrvMsg(pScrn->scrnIndex, from, "Max pixel clock is %d MHz\n",
pCir->MaxClock / 1000);
/*
* Setup the ClockRanges, which describe what clock ranges are available,
* and what sort of modes they can be used for.
*/
clockRanges = xnfcalloc(sizeof(ClockRange), 1);
clockRanges->next = NULL;
clockRanges->minClock = pCir->MinClock;
clockRanges->maxClock = pCir->MaxClock;
clockRanges->clockIndex = -1; /* programmable */
clockRanges->interlaceAllowed = FALSE; /* XXX check this */
clockRanges->doubleScanAllowed = FALSE; /* XXX check this */
clockRanges->doubleScanAllowed = FALSE; /* XXX check this */
clockRanges->doubleScanAllowed = FALSE; /* XXX check this */
clockRanges->ClockMulFactor = 1;
clockRanges->ClockDivFactor = 1;
clockRanges->PrivFlags = 0;
/* Depending upon what sized tiles used, either 128 or 256. */
/* Aw, heck. Just say 128. */
pCir->Rounding = 128 >> pCir->BppShift;
/*
* xf86ValidateModes will check that the mode HTotal and VTotal values
* don't exceed the chipset's limit if pScrn->maxHValue and
* pScrn->maxVValue are set. Since our CIRValidMode() already takes
* care of this, we don't worry about setting them here.
*/
i = xf86ValidateModes(pScrn, pScrn->monitor->Modes, pScrn->display->modes,
clockRanges,
LgLinePitches[pScrn->bitsPerPixel / 8 - 1],
0, 0, 128 * 8,
0, 0, /* Any virtual height is allowed. */
pScrn->display->virtualX,
pScrn->display->virtualY,
pCir->FbMapSize,
LOOKUP_BEST_REFRESH);
pCir->chip.lg->lineDataIndex = LgFindLineData(pScrn->displayWidth,
pScrn->bitsPerPixel);
if (i == -1) {
LgFreeRec(pScrn);
return FALSE;
}
/* Prune the modes marked as invalid */
xf86PruneDriverModes(pScrn);
if (i == 0 || pScrn->modes == NULL) {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No valid modes found\n");
LgFreeRec(pScrn);
return FALSE;
}
/*
* Set the CRTC parameters for all of the modes based on the type
* of mode, and the chipset's interlace requirements.
*
* Calling this is required if the mode->Crtc* values are used by the
* driver and if the driver doesn't provide code to set them. They
* are not pre-initialised at all.
*/
xf86SetCrtcForModes(pScrn, INTERLACE_HALVE_V);
/* Set the current mode to the first in the list */
pScrn->currentMode = pScrn->modes;
/* Print the list of modes being used */
xf86PrintModes(pScrn);
/* Set display resolution */
xf86SetDpi(pScrn, 0, 0);
/* Load bpp-specific modules */
switch (pScrn->bitsPerPixel) {
case 8:
case 16:
case 24:
case 32:
if (xf86LoadSubModule(pScrn, "fb") == NULL) {
LgFreeRec(pScrn);
return FALSE;
}
xf86LoaderReqSymLists(fbSymbols, NULL);
break;
}
/* Load XAA if needed */
if (!pCir->NoAccel) {
if (!xf86LoadSubModule(pScrn, "xaa")) {
LgFreeRec(pScrn);
return FALSE;
}
xf86LoaderReqSymLists(xaaSymbols, NULL);
}
/* Load ramdac if needed */
if (pCir->HWCursor) {
if (!xf86LoadSubModule(pScrn, "ramdac")) {
LgFreeRec(pScrn);
return FALSE;
}
xf86LoaderReqSymLists(ramdacSymbols, NULL);
}
if (pCir->shadowFB) {
if (!xf86LoadSubModule(pScrn, "shadowfb")) {
LgFreeRec(pScrn);
return FALSE;
}
xf86LoaderReqSymLists(shadowSymbols, NULL);
}
return TRUE;
}
void
Permedia3PreInit(ScrnInfoPtr pScrn)
{
GLINTPtr pGlint = GLINTPTR(pScrn);
CARD32 LocalMemCaps;
TRACE_ENTER("Permedia3PreInit");
if (IS_J2000) {
unsigned char m,n,p;
if (pGlint->Chipset == PCI_VENDOR_3DLABS_CHIP_GAMMA)
GLINT_SLOW_WRITE_REG(GCSRSecondaryGLINTMapEn, GCSRAperture);
/* Memory timings for the Appian J2000 board.
* This is needed for the second head which is left un-initialized
* by the bios, thus freezing the machine. */
GLINT_SLOW_WRITE_REG(0x02e311B8, PM3LocalMemCaps);
GLINT_SLOW_WRITE_REG(0x07424905, PM3LocalMemTimings);
GLINT_SLOW_WRITE_REG(0x0c000003, PM3LocalMemControl);
GLINT_SLOW_WRITE_REG(0x00000061, PM3LocalMemRefresh);
GLINT_SLOW_WRITE_REG(0x00000000, PM3LocalMemPowerDown);
/* Let's program the K, M and S Clocks to the same values as the bios
* does for first head :
* - KClk and MClk are 105Mhz.
* - S Clock is set to PClk.
* Note 1 : pGlint->RefClock is not set yet, so use 14318 instead.
* Note 2 : KClk gets internally halved, so we need to double it.
*/
(void) PM3DAC_CalculateClock(2*105000, 14318, &m,&n,&p);
Permedia2vOutIndReg(pScrn, PM3RD_KClkPreScale, 0x00, m);
Permedia2vOutIndReg(pScrn, PM3RD_KClkFeedbackScale, 0x00, n);
Permedia2vOutIndReg(pScrn, PM3RD_KClkPostScale, 0x00, p);
Permedia2vOutIndReg(pScrn, PM3RD_KClkControl, 0x00,
PM3RD_KClkControl_STATE_RUN |
PM3RD_KClkControl_SOURCE_PLL |
PM3RD_KClkControl_ENABLE);
Permedia2vOutIndReg(pScrn, PM3RD_MClkControl, 0x00,
PM3RD_MClkControl_STATE_RUN |
PM3RD_MClkControl_SOURCE_KCLK |
PM3RD_MClkControl_ENABLE);
Permedia2vOutIndReg(pScrn, PM3RD_SClkControl, 0x00,
PM3RD_SClkControl_STATE_RUN |
PM3RD_SClkControl_SOURCE_PCLK |
PM3RD_SClkControl_ENABLE);
}
#if defined(__alpha__)
/*
* On Alpha, we have to "int10" secondary VX1 cards early;
* otherwise, some information taken from registers, like
* memory size, is incorrect.
*/
if (!xf86IsPrimaryPci(pGlint->PciInfo)) {
if ( IS_QVX1 ) {
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"VX1 secondary enabling VGA before int10\n");
/* Enable VGA on the current card. */
PCI_WRITE_BYTE(pGlint->PciInfo, 0, 0xf8);
PCI_WRITE_BYTE(pGlint->PciInfo, 0, 0xf4);
PCI_WRITE_BYTE(pGlint->PciInfo, 0, 0xfc);
/* The card we are on should be VGA-enabled now, so run int10. */
if (xf86LoadSubModule(pScrn, "int10")) {
xf86Int10InfoPtr pInt;
xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Initializing int10\n");
pInt = xf86InitInt10(pGlint->pEnt->index);
xf86FreeInt10(pInt);
}
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"VX1 secondary disabling VGA after int10\n");
/* Finally, disable VGA on the current card. */
PCI_WRITE_BYTE(pGlint->PciInfo, 0x70, 0xf8);
PCI_WRITE_BYTE(pGlint->PciInfo, 0x01, 0xf4);
PCI_WRITE_BYTE(pGlint->PciInfo, 0x00, 0xfc);
}
}
#endif /* __alpha__ */
/* If we have SDRAM instead of SGRAM, we have to do some things
differently in the FillRectSolid code. */
LocalMemCaps = GLINT_READ_REG(PM3LocalMemCaps);
pGlint->PM3_UsingSGRAM = !(LocalMemCaps & PM3LocalMemCaps_NoWriteMask);
xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Using %s memory\n",
pGlint->PM3_UsingSGRAM ? "SGRAM" : "SDRAM");
TRACE_EXIT("Permedia3PreInit");
}
