int main(int argc, char **argv)
{
    int    i, c, interlace, frames, err;
    int    ywidth, yheight, uvwidth, uvheight, ylen, uvlen;
    int    verbose = 0, fdin;
    int    NlumaX = 4, NlumaY = 4, NchromaX = 4, NchromaY = 4;
    float  BWlumaX = 0.8, BWlumaY = 0.8, BWchromaX = 0.7, BWchromaY = 0.7;
    struct filter *lumaXtaps, *lumaYtaps, *chromaXtaps, *chromaYtaps;
    u_char *yuvinout[3];
    float *yuvtmp1,*yuvtmp2;
    y4m_stream_info_t istream, ostream;
    y4m_frame_info_t iframe;

    fdin = fileno(stdin);
    
    y4m_accept_extensions(1);

    /* read command line */
    opterr = 0;
    while   ((c = getopt(argc, argv, "hvL:C:x:X:y:Y:")) != EOF)
	{
	    switch  (c)
		{
		case    'L':
		    sscanf(optarg,"%d,%f,%d,%f",&NlumaX,&BWlumaX,&NlumaY,&BWlumaY);
		    break;
		case    'C':
		    sscanf(optarg,"%d,%f,%d,%f",&NchromaX,&BWchromaX,&NchromaY,&BWchromaY);
		    break;
		case    'x':
		    sscanf(optarg,"%d,%f",&NchromaX,&BWchromaX);
		    break;
		case    'X':
		    sscanf(optarg,"%d,%f",&NlumaX,&BWlumaX);
		    break;
		case    'y':
		    sscanf(optarg,"%d,%f",&NchromaY,&BWchromaY);
		    break;
		case    'Y':
		    sscanf(optarg,"%d,%f",&NlumaY,&BWlumaY);
		    break;
		case    'v':
		    verbose++;
		    break;
		case    '?':
		case    'h':
		default:
		    usage();
		}
	}
    
    if (BWlumaX <= 0.0 || BWlumaX > 1.0)
       mjpeg_error_exit1("Horizontal luma bandwidth '%f' not >0 and <=1.0", BWlumaX);
    if (BWlumaY <= 0.0 || BWlumaY > 1.0)
       mjpeg_error_exit1("Vertical luma bandwidth '%f' not >0 and <=1.0", BWlumaY);
    if (BWchromaX <= 0.0 || BWchromaX > 1.0)
       mjpeg_error_exit1("Horizontal chroma bandwidth '%f' not >0 and <=1.0", BWchromaX);
    if (BWchromaY <= 0.0 || BWchromaY > 1.0)
       mjpeg_error_exit1("Vertical chroma bandwidth '%f' not >0 and <=1.0", BWchromaY);

    /* initialize input stream and check chroma subsampling and interlacing */
    y4m_init_stream_info(&istream);
    y4m_init_frame_info(&iframe);
    err = y4m_read_stream_header(fdin, &istream);
    if (err != Y4M_OK)
	mjpeg_error_exit1("Input stream error: %s\n", y4m_strerr(err));

    if	(y4m_si_get_plane_count(&istream) != 3)
	mjpeg_error_exit1("Only the 3 plane formats supported");

    i = y4m_si_get_interlace(&istream);
    switch (i)
        {
        case Y4M_ILACE_NONE:
	    interlace = 0;
	    break;
        case Y4M_ILACE_BOTTOM_FIRST:
        case Y4M_ILACE_TOP_FIRST:
	    interlace = 1;
	    break;
        default:
	    mjpeg_warn("Unknown interlacing '%d', assuming non-interlaced", i);
	    interlace = 0;
	    break;
        }

    ywidth = y4m_si_get_width(&istream);	/* plane 0 = Y */
    yheight = y4m_si_get_height(&istream);
    ylen = ywidth * yheight;
    uvwidth = y4m_si_get_plane_width(&istream, 1);	/* planes 1&2 = U+V */
    uvheight = y4m_si_get_plane_height(&istream, 1);
    uvlen = y4m_si_get_plane_length(&istream, 1);
    
    /* initialize output stream */
    y4m_init_stream_info(&ostream);
    y4m_copy_stream_info(&ostream, &istream);
    y4m_write_stream_header(fileno(stdout), &ostream);
    
    /* allocate input and output buffers */
    yuvinout[0] = my_malloc(ylen*sizeof(u_char));
    yuvinout[1] = my_malloc(uvlen*sizeof(u_char));
    yuvinout[2] = my_malloc(uvlen*sizeof(u_char));
    yuvtmp1 = my_malloc(MAX(ylen,uvlen)*sizeof(float));
    yuvtmp2 = my_malloc(MAX(ylen,uvlen)*sizeof(float));

    /* get filter taps */
    lumaXtaps   = get_coeff(NlumaX, BWlumaX);
    lumaYtaps   = get_coeff(NlumaY, BWlumaY);
    chromaXtaps = get_coeff(NchromaX, BWchromaX);
    chromaYtaps = get_coeff(NchromaY, BWchromaY);

    set_accel(uvwidth,uvheight);

    if (verbose)
	y4m_log_stream_info(mjpeg_loglev_t("info"), "", &istream);
    
    /* main processing loop */
    for (frames=0; y4m_read_frame(fdin,&istream,&iframe,yuvinout) == Y4M_OK; frames++)
	{
	    if (verbose && ((frames % 100) == 0))
		mjpeg_info("Frame %d\n", frames);
	    
            convolveFrame(yuvinout[0],ywidth,yheight,interlace,lumaXtaps,lumaYtaps,yuvtmp1,yuvtmp2);
            convolveFrame(yuvinout[1],uvwidth,uvheight,interlace,chromaXtaps,chromaYtaps,yuvtmp1,yuvtmp2);
            convolveFrame(yuvinout[2],uvwidth,uvheight,interlace,chromaXtaps,chromaYtaps,yuvtmp1,yuvtmp2);

	    y4m_write_frame(fileno(stdout), &ostream, &iframe, yuvinout);

	}
    
    /* clean up */
    y4m_fini_frame_info(&iframe);
    y4m_fini_stream_info(&istream);
    y4m_fini_stream_info(&ostream);
    exit(0);
}
示例#2
0
int main(int argc, char *argv[])
{
   int verbosity = 1;
   double time_between_frames = 0.0;
   double frame_rate = 0.0;
   struct timeval time_now;
   int n, frame;
   unsigned char *yuv[3];
   int in_fd = 0;
   int screenwidth=0, screenheight=0;
   y4m_stream_info_t streaminfo;
   y4m_frame_info_t frameinfo;
   int frame_width;
   int frame_height;
   int wait_for_sync = 1;
   char *window_title = NULL;

   while ((n = getopt(argc, argv, "hs:t:f:cv:")) != EOF) {
      switch (n) {
         case 'c':
            wait_for_sync = 0;
            break;
         case 's':
            if (sscanf(optarg, "%dx%d", &screenwidth, &screenheight) != 2) {
               mjpeg_error_exit1( "-s option needs two arguments: -s 10x10");
               exit(1);
            }
            break;
	  case 't':
	    window_title = optarg;
	    break;
	  case 'f':
		  frame_rate = atof(optarg);
		  if( frame_rate <= 0.0 || frame_rate > 200.0 )
			  mjpeg_error_exit1( "-f option needs argument > 0.0 and < 200.0");
		  break;
          case 'v':
	    verbosity = atoi(optarg);
	    if ((verbosity < 0) || (verbosity > 2))
	      mjpeg_error_exit1("-v needs argument from {0, 1, 2} (not %d)",
				verbosity);
	    break;
	  case 'h':
	  case '?':
            usage();
            exit(1);
            break;
         default:
            usage();
            exit(1);
      }
   }

   mjpeg_default_handler_verbosity(verbosity);

   y4m_accept_extensions(1);
   y4m_init_stream_info(&streaminfo);
   y4m_init_frame_info(&frameinfo);
   if ((n = y4m_read_stream_header(in_fd, &streaminfo)) != Y4M_OK) {
      mjpeg_error("Couldn't read YUV4MPEG2 header: %s!",
         y4m_strerr(n));
      exit (1);
   }

   switch (y4m_si_get_chroma(&streaminfo)) {
   case Y4M_CHROMA_420JPEG:
   case Y4M_CHROMA_420MPEG2:
   case Y4M_CHROMA_420PALDV:
     break;
   default:
     mjpeg_error_exit1("Cannot handle non-4:2:0 streams yet!");
   }

   frame_width = y4m_si_get_width(&streaminfo);
   frame_height = y4m_si_get_height(&streaminfo);

   if ((screenwidth <= 0) || (screenheight <= 0)) {
     /* no user supplied screen size, so let's use the stream info */
     y4m_ratio_t aspect = y4m_si_get_sampleaspect(&streaminfo);
       
     if (!(Y4M_RATIO_EQL(aspect, y4m_sar_UNKNOWN))) {
       /* if pixel aspect ratio present, use it */
#if 1
       /* scale width, but maintain height (line count) */
       screenheight = frame_height;
       screenwidth = frame_width * aspect.n / aspect.d;
#else
       if ((frame_width * aspect.d) < (frame_height * aspect.n)) {
	 screenwidth = frame_width;
	 screenheight = frame_width * aspect.d / aspect.n;
       } else {
	 screenheight = frame_height;
	 screenwidth = frame_height * aspect.n / aspect.d;
       }
#endif
     } else {
       /* unknown aspect ratio -- assume square pixels */
       screenwidth = frame_width;
       screenheight = frame_height;
     }
   }

   /* Initialize the SDL library */
   if( SDL_Init(SDL_INIT_VIDEO) < 0 ) {
      mjpeg_error("Couldn't initialize SDL: %s", SDL_GetError());
      exit(1);
   }

   /* set window title */
   SDL_WM_SetCaption(window_title, NULL);

   /* yuv params */
   yuv[0] = malloc(frame_width * frame_height * sizeof(unsigned char));
   yuv[1] = malloc(frame_width * frame_height / 4 * sizeof(unsigned char));
   yuv[2] = malloc(frame_width * frame_height / 4 * sizeof(unsigned char));

   screen = SDL_SetVideoMode(screenwidth, screenheight, 0, SDL_SWSURFACE);
   if ( screen == NULL ) {
      mjpeg_error("SDL: Couldn't set %dx%d: %s",
		  screenwidth, screenheight, SDL_GetError());
      exit(1);
   }
   else {
      mjpeg_debug("SDL: Set %dx%d @ %d bpp",
		  screenwidth, screenheight, screen->format->BitsPerPixel);
   }

   /* since IYUV ordering is not supported by Xv accel on maddog's system
    *  (Matrox G400 --- although, the alias I420 is, but this is not
    *  recognized by SDL), we use YV12 instead, which is identical,
    *  except for ordering of Cb and Cr planes...
    * we swap those when we copy the data to the display buffer...
    */
   yuv_overlay = SDL_CreateYUVOverlay(frame_width, frame_height,
				      SDL_YV12_OVERLAY,
				      screen);
   if ( yuv_overlay == NULL ) {
      mjpeg_error("SDL: Couldn't create SDL_yuv_overlay: %s",
		      SDL_GetError());
      exit(1);
   }
   if ( yuv_overlay->hw_overlay ) 
     mjpeg_debug("SDL: Using hardware overlay.");

   rect.x = 0;
   rect.y = 0;
   rect.w = screenwidth;
   rect.h = screenheight;

   SDL_DisplayYUVOverlay(yuv_overlay, &rect);

   signal (SIGINT, sigint_handler);

   frame = 0;
   if ( frame_rate == 0.0 ) 
   {
	   /* frame rate has not been set from command-line... */
	   if (Y4M_RATIO_EQL(y4m_fps_UNKNOWN, y4m_si_get_framerate(&streaminfo))) {
	     mjpeg_info("Frame-rate undefined in stream... assuming 25Hz!" );
	     frame_rate = 25.0;
	   } else {
	     frame_rate = Y4M_RATIO_DBL(y4m_si_get_framerate(&streaminfo));
	   }
   }
   time_between_frames = 1.e6 / frame_rate;

   gettimeofday(&time_now,0);

   while ((n = y4m_read_frame(in_fd, &streaminfo, &frameinfo, yuv)) == Y4M_OK && (!got_sigint)) {

      /* Lock SDL_yuv_overlay */
      if ( SDL_MUSTLOCK(screen) ) {
         if ( SDL_LockSurface(screen) < 0 ) break;
      }
      if (SDL_LockYUVOverlay(yuv_overlay) < 0) break;

      /* let's draw the data (*yuv[3]) on a SDL screen (*screen) */
      memcpy(yuv_overlay->pixels[0], yuv[0], frame_width * frame_height);
      memcpy(yuv_overlay->pixels[1], yuv[2], frame_width * frame_height / 4);
      memcpy(yuv_overlay->pixels[2], yuv[1], frame_width * frame_height / 4);

      /* Unlock SDL_yuv_overlay */
      if ( SDL_MUSTLOCK(screen) ) {
         SDL_UnlockSurface(screen);
      }
      SDL_UnlockYUVOverlay(yuv_overlay);

      /* Show, baby, show! */
      SDL_DisplayYUVOverlay(yuv_overlay, &rect);
      mjpeg_info("Playing frame %4.4d - %s",
		 frame, print_status(frame, frame_rate));

      if (wait_for_sync)
         while(get_time_diff(time_now) < time_between_frames) {
            usleep(1000);
         }
      frame++;

      gettimeofday(&time_now,0);
   }

   if ((n != Y4M_OK) && (n != Y4M_ERR_EOF))
      mjpeg_error("Couldn't read frame: %s", y4m_strerr(n));

   for (n=0; n<3; n++) {
      free(yuv[n]);
   }

   mjpeg_info("Played %4.4d frames (%s)",
	      frame, print_status(frame, frame_rate));

   SDL_FreeYUVOverlay(yuv_overlay);
   SDL_Quit();

   y4m_fini_frame_info(&frameinfo);
   y4m_fini_stream_info(&streaminfo);
   return 0;
}
示例#3
0
static void process(  int fdIn , y4m_stream_info_t  *inStrInfo,
                      int fdOut, y4m_stream_info_t  *outStrInfo,
                      int max,int search, int noshift)
{
    y4m_frame_info_t   in_frame ;
    uint8_t            *yuv_data[3],*yuv_odata[3];
    // int result[720]; // will change to malloc based on max shift
    int *lineresult;
    int                y_frame_data_size, uv_frame_data_size ;
    int                read_error_code  = Y4M_OK;
    int                write_error_code = Y4M_OK ;
    int                src_frame_counter ;
    int x,y,w,h,cw,ch;

    h = y4m_si_get_plane_height(inStrInfo,0);
    ch = y4m_si_get_plane_height(inStrInfo,1);

    lineresult = (int *) malloc(sizeof(int) * h);

    chromalloc(yuv_data,inStrInfo);

// initialise and read the first number of frames
    y4m_init_frame_info( &in_frame );
    read_error_code = y4m_read_frame(fdIn,inStrInfo,&in_frame,yuv_data );

    while( Y4M_ERR_EOF != read_error_code && write_error_code == Y4M_OK ) {
        for (y=0; y<h-1; y++)
            lineresult[y] = search_video(max,search,y,yuv_data,inStrInfo);


        if (noshift) {
            /* graphing this would be nice */
            for (x=0; x < h; x++) {
                if (x!=0) printf(", ");
                printf ("%d",lineresult[x]);
            }
            printf("\n");

        } else {

            int shifter = 0;
            for (y=0; y<h-1; y++) {
                // shifter += lineresult[y];
                shifter = -lineresult[y];
                shift_video(shifter,y,yuv_data,inStrInfo);

            }
            write_error_code = y4m_write_frame( fdOut, outStrInfo, &in_frame, yuv_data );
        }
        y4m_fini_frame_info( &in_frame );
        y4m_init_frame_info( &in_frame );
        read_error_code = y4m_read_frame(fdIn,inStrInfo,&in_frame,yuv_data );
        ++src_frame_counter ;
    }

    // Clean-up regardless an error happened or not

    y4m_fini_frame_info( &in_frame );

    free (lineresult);
    chromafree(yuv_data);

    if( read_error_code != Y4M_ERR_EOF )
        mjpeg_error_exit1 ("Error reading from input stream!");
    if( write_error_code != Y4M_OK )
        mjpeg_error_exit1 ("Error writing output stream!");

}
示例#4
0
static void filter(  int fdIn  , y4m_stream_info_t  *inStrInfo, int qual, char *format )
{
	y4m_frame_info_t   in_frame ;
	uint8_t            *yuv_data[3] ;
	int                read_error_code ;
	int                write_error_code ;
	FILE *fh;
	char filename[1024]; // has potential for buffer overflow
	int frame_count=1;


	// to be moved to command line parameters
	//char *format = "frame%03d.jpg";
	//int qual = 95;

	// Allocate memory for the YUV channels

	if (chromalloc(yuv_data,inStrInfo))
		mjpeg_error_exit1 ("Could'nt allocate memory for the YUV4MPEG data!");

	/* Initialize counters */

	write_error_code = Y4M_OK ;

	y4m_init_frame_info( &in_frame );
	read_error_code = y4m_read_frame(fdIn, inStrInfo,&in_frame,yuv_data );


	while( Y4M_ERR_EOF != read_error_code && write_error_code == Y4M_OK ) {

		// do work
		if (read_error_code == Y4M_OK) {

		//	fprintf(stderr,"sprintf filename\n");
			sprintf(filename,format,frame_count);
		//	fprintf(stderr,"fopen filename\n");
		//	fprintf(stderr,"filename: %s\n",filename);

			fh = fopen(filename , "w"); // should check for error
		//	fprintf(stderr,"call put_jpeg_yuv420p_file\n");

			if (fh != NULL) {
				put_jpeg_yuv420p_file(fh,yuv_data,inStrInfo,qual);
				fclose (fh);
			} else {
				perror ("fopen jpeg file");
			}
		}

		y4m_fini_frame_info( &in_frame );
		y4m_init_frame_info( &in_frame );
		read_error_code = y4m_read_frame(fdIn, inStrInfo,&in_frame,yuv_data );
		frame_count++;
	}
	// Clean-up regardless an error happened or not
	y4m_fini_frame_info( &in_frame );

	free( yuv_data[0] );
	free( yuv_data[1] );
	free( yuv_data[2] );

	if( read_error_code != Y4M_ERR_EOF )
		mjpeg_error_exit1 ("Error reading from input stream!");

}
示例#5
0
int main(int argc, char **argv)
	{
	int	c, err, ilace;
	int	fd_in = fileno(stdin), fd_out = fileno(stdout);
	y4m_ratio_t rate;
	y4m_stream_info_t si, so;
	y4m_frame_info_t fi;
	uint8_t *top1[3], *bot1[3], *top2[3], *bot2[3];

	opterr = 0;
	while	((c = getopt(argc, argv, "h")) != EOF)
		{
		switch	(c)
			{
			case	'h':
			case	'?':
			default:
				usage();
			}
		}

	y4m_accept_extensions(1);
	y4m_init_stream_info(&si);
	y4m_init_stream_info(&so);
	y4m_init_frame_info(&fi);

	err = y4m_read_stream_header(fd_in, &si);
	if	(err != Y4M_OK)
		mjpeg_error_exit1("Input stream error: %s\n", y4m_strerr(err));

	if	(y4m_si_get_plane_count(&si) != 3)
		mjpeg_error_exit1("only 3 plane formats supported");

	rate = y4m_si_get_framerate(&si);
	if	(!Y4M_RATIO_EQL(rate, y4m_fps_NTSC))
		mjpeg_error_exit1("input stream not NTSC 30000:1001");

	ilace = y4m_si_get_interlace(&si);
	if	(ilace != Y4M_ILACE_BOTTOM_FIRST && ilace != Y4M_ILACE_TOP_FIRST)
		mjpeg_error_exit1("input stream not interlaced");

	top1[0] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,0) / 2);
	top1[1] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,1) / 2);
	top1[2] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,2) / 2);

	bot1[0] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,0) / 2);
	bot1[1] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,1) / 2);
	bot1[2] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,2) / 2);

	top2[0] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,0) / 2);
	top2[1] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,1) / 2);
	top2[2] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,2) / 2);

	bot2[0] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,0) / 2);
	bot2[1] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,1) / 2);
	bot2[2] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,2) / 2);

	y4m_copy_stream_info(&so, &si);
	y4m_si_set_framerate(&so, y4m_fps_NTSC_FILM);
	y4m_si_set_interlace(&so, Y4M_ILACE_NONE);

/*
 * At this point the input stream has been verified to be interlaced NTSC,
 * the output stream rate set to NTSC_FILM, interlacing tag changed to 
 * progressive, and the field buffers allocated.
 *
 * Time to write the output stream header and commence processing input.
*/
	y4m_write_stream_header(fd_out, &so);

	while	(1)
		{
		err = y4m_read_fields(fd_in, &si, &fi, top1, bot1);
		if	(err != Y4M_OK)
			goto done;
		y4m_write_fields(fd_out, &so, &fi, top1, bot1);		/* A */

		err = y4m_read_fields(fd_in, &si, &fi, top1, bot1);
		if	(err != Y4M_OK)
			goto done;
		y4m_write_fields(fd_out, &so, &fi, top1, bot1);		/* B */

		err = y4m_read_fields(fd_in, &si, &fi, top1, bot1);
		if	(err != Y4M_OK)
			goto done;
		err = y4m_read_fields(fd_in, &si, &fi, top2, bot2);
		if	(err != Y4M_OK)
			{
/*
 * End of input when reading the 2nd "mixed field" frame (C+D).  The previous
 * frame was the first "mixed field" frame (B+C).  Rather than emit a mixed
 * interlaced frame duplicate a field and output the previous frame.
*/
			if	(ilace == Y4M_ILACE_BOTTOM_FIRST)
				y4m_write_fields(fd_out, &so, &fi, bot1,bot1);
			else
				y4m_write_fields(fd_out, &so, &fi, top1,top1);
			goto done;
			}
/*
 * Now the key part of the processing - effectively discarding the first mixed
 * frame with fields from frames B + C and creating the C frame from the two
 * mixed frames.  For a BOTTOM FIELD FIRST stream use the 'top' field from
 * frame 3 and the 'bottom' fields from frame 4.  With a TOP FIELD FIRST stream
 * it's the other way around - use the 'bottom' field from frame 3 and the
 * 'top' field from frame 4.
*/
		if	(ilace == Y4M_ILACE_BOTTOM_FIRST)
			y4m_write_fields(fd_out, &so, &fi, top1, bot2);	/* C */
		else
			y4m_write_fields(fd_out, &so, &fi, top2, bot1); /* C */
		
		err = y4m_read_fields(fd_in, &si, &fi, top1, bot1);
		y4m_write_fields(fd_out, &so, &fi, top1, bot1);		/* D */
		}
done:	y4m_fini_frame_info(&fi);
	y4m_fini_stream_info(&si);
	y4m_fini_stream_info(&so);
	exit(0);
	}
示例#6
0
static void convolve(  int fdIn , y4m_stream_info_t  *inStrInfo,
int fdOut, y4m_stream_info_t  *outStrInfo,
int *mat, int div, int mlen)
{
	y4m_frame_info_t   in_frame ;
	uint8_t            *yuv_data[3],*yuv_odata[3];
	int                read_error_code ;
	int                write_error_code ;
	int                src_frame_counter ;
	float vy,vu,vv;
	int x,y,w,h,cw,ch,mx,my,count;


	w = y4m_si_get_plane_width(inStrInfo,0);
	h = y4m_si_get_plane_height(inStrInfo,0);
	cw = y4m_si_get_plane_width(inStrInfo,1);
	ch = y4m_si_get_plane_height(inStrInfo,1);

	if (chromalloc(yuv_data, inStrInfo))
		mjpeg_error_exit1 ("Could'nt allocate memory for the YUV4MPEG data!");

	if (chromalloc(yuv_odata, inStrInfo))
		mjpeg_error_exit1 ("Could'nt allocate memory for the YUV4MPEG data!");


	write_error_code = Y4M_OK ;
	src_frame_counter = 0 ;

// initialise and read the first number of frames
	y4m_init_frame_info( &in_frame );
	read_error_code = y4m_read_frame(fdIn,inStrInfo,&in_frame,yuv_data );

	while( Y4M_ERR_EOF != read_error_code && write_error_code == Y4M_OK ) {

		for (x=0; x<w; x++) {
			for (y=0; y<h; y++) {
			// perform magic

				vy = 0; count = 0;
				// need to be handled differently for interlace
				for (my=-mlen/2;my <=mlen/2; my++) {
					for (mx=-mlen/2;mx <=mlen/2; mx++) {

					//	fprintf (stderr," x %d - y %d\n",mx,my);

						if ((x + mx >=0) && (x + mx <w) &&
						(y + my  >=0) && (y + my  <h) ) {
					//	fprintf (stderr,"matrix: %d => %d\n", count,mat[count]);
							vy += *(yuv_data[0]+x+mx+(y+my)*w) * mat[count];
						}
						count++;

					}
				}
				vy /= div;
				if (vy < 16) vy = 16;
				if (vy > 240) vy= 240;
				*(yuv_odata[0]+x+y*w) = vy;

				if ((x < cw) && (y<ch)) {

				vu = 0;
				vv = 0;
				count = 0;
				// may need to be handled differently for interlace
				for (my=-mlen/2;my <=mlen/2; my++) {
					for (mx=-mlen/2;mx <=mlen/2; mx++) {

						if ((x + mx >=0) && (x + mx <cw) &&
						(y + my  >=0) && (y + my  <ch) ) {
							vu += (*(yuv_data[1]+x+mx+(y+my)*cw) -128) * mat[count];
							vv += (*(yuv_data[2]+x+mx+(y+my)*cw) -128) * mat[count];

						}
						count ++;

					}
				}
				vu /= div;
				vv /= div;

				if (vu < -112) vu = -112;
				if (vu > 112) vu = 112;

				if (vv < -112) vv = -112;
				if (vv > 112) vv = 112;


				*(yuv_odata[1]+x+y*cw) = vu + 128;
				*(yuv_odata[2]+x+y*cw) = vv + 128;

				}
			}
		}
	write_error_code = y4m_write_frame( fdOut, outStrInfo, &in_frame, yuv_odata );
		y4m_fini_frame_info( &in_frame );
		y4m_init_frame_info( &in_frame );
		read_error_code = y4m_read_frame(fdIn,inStrInfo,&in_frame,yuv_data );
		++src_frame_counter ;

	}

  // Clean-up regardless an error happened or not

	y4m_fini_frame_info( &in_frame );

	free( yuv_data[0] );
	free( yuv_data[1] );
	free( yuv_data[2] );
	free( yuv_odata[0] );
	free( yuv_odata[1] );
	free( yuv_odata[2] );


  if( read_error_code != Y4M_ERR_EOF )
    mjpeg_error_exit1 ("Error reading from input stream!");
  if( write_error_code != Y4M_OK )
    mjpeg_error_exit1 ("Error writing output stream!");

}
static int yw_open_video(YWPrivateData *pd, vob_t *vob)
{
    int errnum = Y4M_OK;
    int ch_mode = 0;
        
    /* initialize stream-information */
    y4m_accept_extensions(1);
    y4m_init_stream_info(&pd->streaminfo);
    y4m_init_frame_info(&pd->frameinfo);
    
    if (vob->im_v_codec == CODEC_YUV) {
	    pd->dstfmt = IMG_YUV_DEFAULT;
    } else if (vob->im_v_codec == CODEC_RGB) {
	    pd->dstfmt = IMG_RGB_DEFAULT;
    } else {
	    tc_log_error(MOD_NAME, "unsupported video format %d",
		            vob->im_v_codec);
        return(TC_EXPORT_ERROR);
    }

    /* we trust autoprobing */
    pd->width = vob->im_v_width;
    pd->height = vob->im_v_height;
    
    pd->fd_vid = open(vob->video_in_file, O_RDONLY);
    if (pd->fd_vid == -1) {
        tc_log_error(MOD_NAME, "can't open video source '%s'"
                               " (reason: %s)", vob->video_in_file,
                               strerror(errno));
    } else {
        if (verbose >= TC_DEBUG) {
            tc_log_info(MOD_NAME, "using video source: %s",
                                  vob->video_in_file);
        }
    }
    
    pd->tcvhandle = tcv_init();
    if (!pd->tcvhandle) {
	tc_log_error(MOD_NAME, "image conversion init failed");
        return(TC_EXPORT_ERROR);
    }

    errnum = y4m_read_stream_header(pd->fd_vid, &pd->streaminfo);
    if (errnum != Y4M_OK) {
        tc_log_error(MOD_NAME, "Couldn't read YUV4MPEG header: %s!",
                     y4m_strerr(errnum));
        tcv_free(pd->tcvhandle);
        close(pd->fd_vid);
        return(TC_IMPORT_ERROR);
    }
    
    if (y4m_si_get_plane_count(&pd->streaminfo) != 3) {
        tc_log_error(MOD_NAME, "Only 3-plane formats supported");
        close(pd->fd_vid);
        return(TC_IMPORT_ERROR);
    }
    ch_mode = y4m_si_get_chroma(&pd->streaminfo);
    if (ch_mode != Y4M_CHROMA_420JPEG
     && ch_mode != Y4M_CHROMA_420MPEG2
     && ch_mode != Y4M_CHROMA_420PALDV) {
        tc_log_error(MOD_NAME, "sorry, chroma mode `%s' (%i) not supported",
                     y4m_chroma_description(ch_mode), ch_mode);
        tcv_free(pd->tcvhandle);
        close(pd->fd_vid);
        return(TC_IMPORT_ERROR);
    }

    if (verbose) {
        tc_log_info(MOD_NAME, "chroma mode: %s",
                    y4m_chroma_description(ch_mode));
    }
    return(TC_IMPORT_OK);
}
int
main(int argc, char **argv)
	{
	int	sts, c, width = 640, height = 480, noheader = 0;
	int	Y = 16, U = 128, V = 128, chroma_mode = Y4M_CHROMA_420MPEG2;
	int	numframes = 1, force = 0;
	y4m_ratio_t	rate_ratio = y4m_fps_NTSC;
	y4m_ratio_t	aspect_ratio = y4m_sar_SQUARE;
	int	plane_length[3];
	u_char	*yuv[3];
	y4m_stream_info_t ostream;
	y4m_frame_info_t oframe;
	char	interlace = Y4M_ILACE_NONE;

	opterr = 0;
	y4m_accept_extensions(1);

	while	((c = getopt(argc, argv, "Hfx:w:h:r:i:a:Y:U:V:n:")) != EOF)
		{
		switch	(c)
			{
			case	'H':
				noheader = 1;
				break;
			case	'a':
				sts = y4m_parse_ratio(&aspect_ratio, optarg);
				if	(sts != Y4M_OK)
					mjpeg_error_exit1("Invalid aspect: %s",
						optarg);
				break;
			case	'w':
				width = atoi(optarg);
				break;
			case	'h':
				height = atoi(optarg);
				break;
			case	'r':
				sts = y4m_parse_ratio(&rate_ratio, optarg);
				if	(sts != Y4M_OK)
					mjpeg_error_exit1("Invalid rate: %s", optarg);
				break;
			case	'Y':
				Y = atoi(optarg);
				break;
			case	'U':
				U = atoi(optarg);
				break;
			case	'V':
				V = atoi(optarg);
				break;
			case	'i':
				switch	(optarg[0])
					{
					case	'p':
						interlace = Y4M_ILACE_NONE;
						break;
					case	't':
						interlace = Y4M_ILACE_TOP_FIRST;
						break;
					case	'b':
						interlace = Y4M_ILACE_BOTTOM_FIRST;
						break;
					default:
						usage();
					}
				break;
			case	'x':
				chroma_mode = y4m_chroma_parse_keyword(optarg);
				if	(chroma_mode == Y4M_UNKNOWN)
					{
					if	(strcmp(optarg, "help") != 0)
						mjpeg_error("Invalid -x arg '%s'", optarg);
					chroma_usage();
					}

				break;
			case	'f':
				force = 1;
				break;
			case	'n':
				numframes = atoi(optarg);
				break;
			case	'?':
			default:
				usage();
			}
		}

	if	(width <= 0)
		mjpeg_error_exit1("Invalid Width: %d", width);

	if	(height <= 0)
		mjpeg_error_exit1("Invalid Height: %d", height);

	if	(!force && (Y < 16 || Y > 235))
		mjpeg_error_exit1("16 < Y < 235");

	if	(!force && (U < 16 || U > 240))
		mjpeg_error_exit1("16 < U < 240");

	if	(!force && (V < 16 || V > 240))
		mjpeg_error_exit1("16 < V < 240");

	y4m_init_stream_info(&ostream);
	y4m_init_frame_info(&oframe);
	y4m_si_set_width(&ostream, width);
	y4m_si_set_height(&ostream, height);
	y4m_si_set_interlace(&ostream, interlace);
	y4m_si_set_framerate(&ostream, rate_ratio);
	y4m_si_set_sampleaspect(&ostream, aspect_ratio);
	y4m_si_set_chroma(&ostream, chroma_mode);

	if	(y4m_si_get_plane_count(&ostream) != 3)
		mjpeg_error_exit1("Only the 3 plane formats supported");

	plane_length[0] = y4m_si_get_plane_length(&ostream, 0);
	plane_length[1] = y4m_si_get_plane_length(&ostream, 1);
	plane_length[2] = y4m_si_get_plane_length(&ostream, 2);

	yuv[0] = malloc(plane_length[0]);
	yuv[1] = malloc(plane_length[1]);
	yuv[2] = malloc(plane_length[2]);

/*
 * Now fill the array once with black but use the provided Y, U and V values
*/
	memset(yuv[0], Y, plane_length[0]);
	memset(yuv[1], U, plane_length[1]);
	memset(yuv[2], V, plane_length[2]);

	if	(noheader == 0)
		y4m_write_stream_header(fileno(stdout), &ostream);
	while	(numframes--)
		y4m_write_frame(fileno(stdout), &ostream, &oframe, yuv);

	free(yuv[0]);
	free(yuv[1]);
	free(yuv[2]);
	y4m_fini_stream_info(&ostream);
	y4m_fini_frame_info(&oframe);
	exit(0);
	}
int
main(int argc, char **argv)
	{
	int	fdin, fdout, err, c, i, verbose = 1;
	y4m_stream_info_t istream, ostream;
	y4m_frame_info_t iframe;

	fdin = fileno(stdin);
	fdout = fileno(stdout);

	y4m_accept_extensions(1);
	y4m_init_stream_info(&istream);
	y4m_init_frame_info(&iframe);

	while	((c = getopt(argc, argv, "L:C:hv:N")) != EOF)
		{
		switch	(c)
			{
			case	'N':
				lowuv = lowy = 0;
				lowuv = highy = 255;
				break;
			case	'L':
				i = sscanf(optarg, "%lf,%lf,%d", &y_radius, 
						&y_amount, &y_threshold);
				if	(i != 3)
					{
					mjpeg_error("-L r,a,t");
					usage();
					}
				break;
			case	'C':
				i = sscanf(optarg, "%lf,%lf,%d", &uv_radius,
						&uv_amount, &uv_threshold);
				if	(i != 3)
					{
					mjpeg_error("-C r,a,t");
					usage();
					}
				break;
			case	'v':
				verbose = atoi(optarg);
				if	(verbose < 0 || verbose > 2)
					mjpeg_error_exit1("-v 0|1|2");
				break;
			case	'h':
			default:
				usage();
				break;
			}
		}

	if	(isatty(fdout))
		mjpeg_error_exit1("stdout must not be a terminal");

	mjpeg_default_handler_verbosity(verbose);

	err = y4m_read_stream_header(fdin, &istream);
	if	(err != Y4M_OK)
		mjpeg_error_exit1("Couldn't read input stream header");

	switch	(y4m_si_get_interlace(&istream))
		{
		case	Y4M_ILACE_NONE:
			interlaced = 0;
			break;
		case	Y4M_ILACE_BOTTOM_FIRST:
		case	Y4M_ILACE_TOP_FIRST:
			interlaced = 1;
			break;
		default:
			mjpeg_error_exit1("Unsupported/unknown interlacing");
		}

	if	(y4m_si_get_plane_count(&istream) != 3)
		mjpeg_error_exit1("Only 3 plane formats supported");

	yheight = y4m_si_get_plane_height(&istream, 0);
	uvheight = y4m_si_get_plane_height(&istream, 1);
	ywidth = y4m_si_get_plane_width(&istream, 0);
	uvwidth = y4m_si_get_plane_width(&istream, 1);
	ylen = y4m_si_get_plane_length(&istream, 0);
	uvlen = y4m_si_get_plane_length(&istream, 1);

/* Input and output frame buffers */
	i_yuv[0] = (u_char *)malloc(ylen);
	i_yuv[1] = (u_char *)malloc(uvlen);
	i_yuv[2] = (u_char *)malloc(uvlen);
	o_yuv[0] = (u_char *)malloc(ylen);
	o_yuv[1] = (u_char *)malloc(uvlen);
	o_yuv[2] = (u_char *)malloc(uvlen);

/*
 * general purpose row/column scratch buffers.  Slightly over allocated to
 * simplify life.
*/
	cur_col = (u_char *)malloc(MAX(ywidth, yheight));
	dest_col = (u_char *)malloc(MAX(ywidth, yheight));
	cur_row = (u_char *)malloc(MAX(ywidth, yheight));
	dest_row = (u_char *)malloc(MAX(ywidth, yheight));

/*
 * Generate the convolution matrices.  The generation routine allocates the
 * memory and returns the length.
*/
	cmatrix_y_len = gen_convolve_matrix(y_radius, &cmatrix_y);
	cmatrix_uv_len = gen_convolve_matrix(uv_radius, &cmatrix_uv);
	ctable_y = gen_lookup_table(cmatrix_y, cmatrix_y_len);
	ctable_uv = gen_lookup_table(cmatrix_uv, cmatrix_uv_len);

	y4m_init_stream_info(&ostream);
	y4m_copy_stream_info(&ostream, &istream);
	y4m_write_stream_header(fileno(stdout), &ostream);

	mjpeg_info("Luma radius: %f", y_radius);
	mjpeg_info("Luma amount: %f", y_amount);
	mjpeg_info("Luma threshold: %d", y_threshold);
	if	(uv_radius != -1.0)
		{
		mjpeg_info("Chroma radius: %f", uv_radius);
		mjpeg_info("Chroma amount: %f", uv_amount);
		mjpeg_info("Chroma threshold: %d", uv_threshold);
		}

	for	(frameno = 0; y4m_read_frame(fdin, &istream, &iframe, i_yuv) == Y4M_OK; frameno++)
		{
		y4munsharp();
		err = y4m_write_frame(fdout, &ostream, &iframe, o_yuv);
		if	(err != Y4M_OK)
			{
			mjpeg_error("y4m_write_frame err at frame %d", frameno);
			break;
			}
		}
	y4m_fini_frame_info(&iframe);
	y4m_fini_stream_info(&istream);
	y4m_fini_stream_info(&ostream);
	exit(0);
	}
示例#10
0
static int generate_YUV4MPEG(parameters_t *param)
{
  uint32_t frame;
  //size_t pngsize;
  char pngname[FILENAME_MAX];
  uint8_t *yuv[3];  /* buffer for Y/U/V planes of decoded PNG */
  y4m_stream_info_t streaminfo;
  y4m_frame_info_t frameinfo;

  if ((param->width % 2) == 0)
    param->new_width = param->width;
  else
    {
      param->new_width = ((param->width >> 1) + 1) << 1;
      printf("Setting new, even image width %d", param->new_width);
    }

  mjpeg_info("Now generating YUV4MPEG stream.");
  y4m_init_stream_info(&streaminfo);
  y4m_init_frame_info(&frameinfo);

  y4m_si_set_width(&streaminfo, param->new_width);
  y4m_si_set_height(&streaminfo, param->height);
  y4m_si_set_interlace(&streaminfo, param->interlace);
  y4m_si_set_framerate(&streaminfo, param->framerate);
  y4m_si_set_chroma(&streaminfo, param->ss_mode);

  yuv[0] = (uint8_t *)malloc(param->new_width * param->height * sizeof(yuv[0][0]));
  yuv[1] = (uint8_t *)malloc(param->new_width * param->height * sizeof(yuv[1][0]));
  yuv[2] = (uint8_t *)malloc(param->new_width * param->height * sizeof(yuv[2][0]));

  y4m_write_stream_header(STDOUT_FILENO, &streaminfo);

  for (frame = param->begin;
       (frame < param->numframes + param->begin) || (param->numframes == -1);
       frame++) 
    {
      //      if (frame < 25)
      //      else      
      //snprintf(pngname, sizeof(pngname), param->pngformatstr, frame - 25);
      snprintf(pngname, sizeof(pngname), param->pngformatstr, frame);
            
      raw0 = yuv[0];
      raw1 = yuv[1];
      raw2 = yuv[2];
      if (decode_png(pngname, 1, param) == -1)
	{
	  mjpeg_info("Read from '%s' failed:  %s", pngname, strerror(errno));
	  if (param->numframes == -1) 
	    {
	      mjpeg_info("No more frames.  Stopping.");
	      break;  /* we are done; leave 'while' loop */
	    } 
	  else 
	    {
	      mjpeg_info("Rewriting latest frame instead.");
	    }
	} 
      else 
	{
#if 0 
	  mjpeg_debug("Preparing frame");
	  
	  /* Now open this PNG file, and examine its header to retrieve the 
	     YUV4MPEG info that shall be written */

	  if ((param->interlace == Y4M_ILACE_NONE) || (param->interleave == 1)) 
	    {
	      mjpeg_info("Processing non-interlaced/interleaved %s.", 
			 pngname, pngsize);

	      decode_png(imagedata, 0, 420, yuv[0], yuv[1], yuv[2], 
			 param->width, param->height, param->new_width);
	      
#if 0 
	      if (param->make_z_alpha)
		{
		  mjpeg_info("Writing Z/Alpha data.\n");
		  za_write(real_z_imagemap, param->width, param->height,z_alpha_fp,frame);
		}
#endif
	    } 
	  else 
	    {
	      mjpeg_error_exit1("Can't handle interlaced PNG information (yet) since there is no standard for it.\n"
				"Use interleaved mode (-L option) to create interlaced material.");

	      switch (param->interlace) 
		{		  
		case Y4M_ILACE_TOP_FIRST:
		  mjpeg_info("Processing interlaced, top-first %s", pngname);
#if 0 
		  decode_jpeg_raw(jpegdata, jpegsize,
				  Y4M_ILACE_TOP_FIRST,
				  420, param->width, param->height,
				  yuv[0], yuv[1], yuv[2]);
#endif
		  break;
		case Y4M_ILACE_BOTTOM_FIRST:
		  mjpeg_info("Processing interlaced, bottom-first %s", pngname);
#if 0 
		  decode_jpeg_raw(jpegdata, jpegsize,
				  Y4M_ILACE_BOTTOM_FIRST,
				  420, param->width, param->height,
				  yuv[0], yuv[1], yuv[2]);
#endif
		  break;
		default:
		  mjpeg_error_exit1("FATAL logic error?!?");
		  break;
		}
	    }
#endif
	  mjpeg_debug("Converting frame to YUV format.");
	  /* Transform colorspace, then subsample (in place) */
	  convert_RGB_to_YCbCr(yuv, param->height *  param->new_width);
	  chroma_subsample(param->ss_mode, yuv, param->new_width, param->height);

	  mjpeg_debug("Frame decoded, now writing to output stream.");
	}
      
      mjpeg_debug("Frame decoded, now writing to output stream.");
      y4m_write_frame(STDOUT_FILENO, &streaminfo, &frameinfo, yuv);
    }

#if 0 
  if (param->make_z_alpha)
    {
      za_write_end(z_alpha_fp);
      fclose(z_alpha_fp);
    }
#endif

  y4m_fini_stream_info(&streaminfo);
  y4m_fini_frame_info(&frameinfo);
  free(yuv[0]);
  free(yuv[1]);
  free(yuv[2]);

  return 0;
}
示例#11
0
int
main(int argc, char *argv[])
{
	int	i;
	long long avg, total;
	int	input_fd = 0;
	int	output_fd = 1;
	int	horz;
	int	vert;
	int	c;
	int	frame_count;

	y4m_stream_info_t istream, ostream;
	y4m_frame_info_t iframe;

	y4m_accept_extensions(1);

	while((c = getopt(argc, argv, "r:R:t:T:v:S:hI:w:fc:")) != EOF) {
		switch(c) {
		case 'r':
			radius_luma = atoi(optarg);
			break;
		case 'R':
			radius_chroma = atoi(optarg);
			break;
		case 't':
			threshold_luma = atoi(optarg);
			break;
		case 'T':
			threshold_chroma = atoi(optarg);
			break;
		case 'I':
			interlace = atoi (optarg);
			if (interlace != 0 && interlace != 1)
			{
				Usage (argv[0]);
				exit (1);
			}
			break;
		case 'S':
			param_skip = atoi (optarg);
			break;
		case 'f':
			param_fast = 1;
			break;
		case 'w':
			if (strcmp (optarg, "8") == 0)
				param_weight_type = 1;
			else if (strcmp (optarg, "2.667") == 0)
				param_weight_type = 2;
			else if (strcmp (optarg, "13.333") == 0)
				param_weight_type = 3;
			else if (strcmp (optarg, "24") == 0)
				param_weight_type = 4;
			else
				param_weight_type = 0;
			param_weight = atof (optarg);
			break;
                case 'c':
                        cutoff = atof(optarg);
                        break;
		case 'v':
			verbose = atoi (optarg);
			if (verbose < 0 || verbose >2)
			{
				Usage (argv[0]);
				exit (1);
			}
			break;		  
			
		case 'h':
                        Usage (argv[0]);
		default:
			exit(0);
		}
	}

        if( param_weight < 0 ) {
            if( param_fast )
                param_weight = 8.0;
            else
                param_weight = 1.0;
        }

        for( i=1; i<NUMAVG; i++ ) {
            avg_replace[i]=0;
            divisor[i]=((1<<DIVISORBITS)+(i>>1))/i;
            divoffset[i]=divisor[i]*(i>>1)+(divisor[i]>>1);
        }

#ifdef HAVE_ASM_MMX
        if( cpu_accel() & ACCEL_X86_MMXEXT )
            domean8=1;
#endif

	mjpeg_info ("fast %d, weight type %d\n", param_fast,
		param_weight_type);

	if (radius_luma <= 0 || radius_chroma <= 0)
	   mjpeg_error_exit1("radius values must be > 0!");

	if (threshold_luma < 0 || threshold_chroma < 0)
	   mjpeg_error_exit1("threshold values must be >= 0!");

   (void)mjpeg_default_handler_verbosity(verbose);

	y4m_init_stream_info(&istream);
	y4m_init_stream_info(&ostream);
	y4m_init_frame_info(&iframe);

	i = y4m_read_stream_header(input_fd, &istream);
	if (i != Y4M_OK)
	  mjpeg_error_exit1("Input stream error: %s", y4m_strerr(i));

	if (y4m_si_get_plane_count(&istream) != 3)
	   mjpeg_error_exit1("Only 3 plane formats supported");

	chroma_mode = y4m_si_get_chroma(&istream);
	SS_H = y4m_chroma_ss_x_ratio(chroma_mode).d;
	SS_V = y4m_chroma_ss_y_ratio(chroma_mode).d;

	mjpeg_debug("chroma subsampling: %dH %dV\n",SS_H,SS_V);

	if (interlace == -1)
	{
	  i = y4m_si_get_interlace(&istream);
	  switch (i)
	  {
	  case Y4M_ILACE_NONE:
	       interlace = 0;
	       break;
	  case Y4M_ILACE_BOTTOM_FIRST:
	  case Y4M_ILACE_TOP_FIRST:
	       interlace = 1;
	       break;
	  default:
	       mjpeg_warn("Unknown interlacing '%d', assuming non-interlaced", i);
	       interlace = 0;
	       break;
	  }
	}

	if( interlace && y4m_si_get_height(&istream) % 2 != 0 )
		mjpeg_error_exit1("Input images have odd number of lines - can't treats as interlaced!" );

	horz = y4m_si_get_width(&istream);
	vert = y4m_si_get_height(&istream);
	mjpeg_debug("width=%d height=%d luma_r=%d chroma_r=%d luma_t=%d chroma_t=%d", horz, vert, radius_luma, radius_chroma, threshold_luma, threshold_chroma);

	y4m_copy_stream_info(&ostream, &istream);

	input_frame[0] = malloc(horz * vert);
	input_frame[1] = malloc((horz / SS_H) * (vert / SS_V));
	input_frame[2] = malloc((horz / SS_H) * (vert / SS_V));

	output_frame[0] = malloc(horz * vert);
	output_frame[1] = malloc((horz / SS_H) * (vert / SS_V));
	output_frame[2] = malloc((horz / SS_H) * (vert / SS_V));


	y4m_write_stream_header(output_fd, &ostream);

	frame_count = 0;
	while (y4m_read_frame(input_fd, &istream, &iframe, input_frame) == Y4M_OK)
	{ 
		frame_count++;
		if (frame_count > param_skip)
		{
		  filter(horz, vert,  input_frame, output_frame);
		  y4m_write_frame(output_fd, &ostream, &iframe, output_frame);
		}
		else
		  y4m_write_frame(output_fd, &ostream, &iframe, input_frame);
	}

	for (total=0, avg=0, i=0; i < NUMAVG; i++) {
		total += avg_replace[i];
                avg   += avg_replace[i] * i; 
        }
	mjpeg_info("frames=%d avg=%3.1f", frame_count, ((double)avg)/((double)total));

	for (i=0; i < NUMAVG; i++) {
		mjpeg_debug( "%02d: %6.2f", i,
			(((double)avg_replace[i]) * 100.0)/(double)(total));
	}

	y4m_fini_stream_info(&istream);
	y4m_fini_stream_info(&ostream);
	y4m_fini_frame_info(&iframe);
	exit(0);
}
示例#12
0
int main (int argc, char *argv[])
{
   int verbose = 1;
   int in_fd  = 0;         /* stdin */
   int out_fd = 1;         /* stdout */
   unsigned char *yuv0[3]; /* input 0 */
   unsigned char *yuv1[3]; /* input 1 */
   unsigned char *yuv[3];  /* output */
   int w, h, len, lensr2;
   int i, j, opacity, opacity_range, frame, numframes, r = 0;
   unsigned int param_opacity0   = 0;     /* opacity of input1 at the beginning */
   unsigned int param_opacity1   = 255;   /* opacity of input1 at the end */
   unsigned int param_duration   = 0;     /* duration of transistion effect */
   unsigned int param_skipframes = 0;     /* # of frames to skip */
   unsigned int param_numframes  = 0;     /* # of frames to (process - skip+num) * framerepeat <= duration */
   unsigned int param_framerep   = 1;    /* # of repititions per frame */
   y4m_stream_info_t streaminfo;
   y4m_frame_info_t frameinfo;

   y4m_init_stream_info (&streaminfo);
   y4m_init_frame_info (&frameinfo);

   while ((i = getopt(argc, argv, "v:o:O:d:s:n:r:")) != -1) {
      switch (i) {
      case 'v':
         verbose = atoi (optarg);
		 if( verbose < 0 || verbose >2 )
		 {
			 usage ();
			 exit (1);
		 }
         break;		  
      case 'o':
         param_opacity0 = atoi (optarg);
         if (param_opacity0 > 255) {
            mjpeg_warn( "start opacity > 255");
            param_opacity0 = 255;
         }
         break;
      case 'O':
         param_opacity1 = atoi (optarg);
         if (param_opacity1 > 255) {
            mjpeg_warn( "end opacity > 255");
            param_opacity1 = 255;
         }
         break;
      case 'd':
         param_duration = atoi (optarg);
         if (param_duration == 0) {
            mjpeg_error_exit1( "error: duration = 0 frames");
         }
         break;
      case 's':
         param_skipframes = atoi (optarg);
         break;
      case 'n':
         param_numframes = atoi (optarg);
         break;
      case 'r':
         param_framerep = atoi (optarg);
         break;
      }
   }
   if (param_numframes == 0)
      param_numframes = (param_duration - param_skipframes) / param_framerep;
   if (param_duration == 0) {
      usage ();
      exit (1);
   }
   numframes = (param_skipframes + param_numframes) * param_framerep;
   if (numframes > param_duration) {
      mjpeg_error_exit1( "skip + num > duration");
   }

   (void)mjpeg_default_handler_verbosity(verbose);


   i = y4m_read_stream_header (in_fd, &streaminfo);
   if (i != Y4M_OK) {
      fprintf (stderr, "%s: input stream error - %s\n", 
	       argv[0], y4m_strerr(i));
      exit (1);
   }
   w = y4m_si_get_width(&streaminfo);
   h = y4m_si_get_height(&streaminfo);
   
   len = w*h;
   lensr2 = len >> 2;
   yuv[0] = malloc (len);
   yuv0[0] = malloc (len);
   yuv1[0] = malloc (len);
   yuv[1] = malloc (lensr2);
   yuv0[1] = malloc (lensr2);
   yuv1[1] = malloc (lensr2);
   yuv[2] = malloc (lensr2); 
   yuv0[2] = malloc (lensr2); 
   yuv1[2] = malloc (lensr2);

   y4m_write_stream_header (out_fd, &streaminfo);

   frame = param_skipframes;
   param_duration--;
   opacity_range = param_opacity1 - param_opacity0;
   while (1) {

      if (!r) {
        r = param_framerep;

      i = y4m_read_frame(in_fd, &streaminfo, &frameinfo, yuv0);
      if (i != Y4M_OK)
          exit (frame < numframes);

      j = y4m_read_frame(in_fd, &streaminfo, &frameinfo, yuv1);
      if (j != Y4M_OK)
          exit (frame < numframes);
      }
      r--;

      opacity = param_opacity0 + ((frame * opacity_range) / param_duration);

      blend (yuv0, yuv1, opacity, len, yuv);
      y4m_write_frame (out_fd, &streaminfo, &frameinfo, yuv);
      if (++frame == numframes)
         exit (0);
   }

}
/** MAIN */
int main( int argc, char **argv)
{
int i, frame_count;
int horz, vert;      /* width and height of the frame */
uint8_t *frame[3];  /*pointer to the 3 color planes of the input frame */
struct area_s inarea;
struct color_yuv coloryuv;
int input_fd = 0;    /* std in */
int output_fd = 1;   /* std out */
int darker = 0;  /* how much darker should the image be */
int copy_pixel = 0; /* how much pixels we should use for filling up the area */
int average_pixel = 0; /* how much pixel to use for average */
y4m_stream_info_t istream, ostream;
y4m_frame_info_t iframe;

inarea.width=0; inarea.height=0; inarea.voffset=0; inarea.hoffset=0;

coloryuv.luma    = LUMA;  /*Setting the luma to black */
coloryuv.chroma_b = CHROMA; /*Setting the chroma to center, means white */
coloryuv.chroma_r = CHROMA; /*Setting the chroma to center, means white */

(void)mjpeg_default_handler_verbosity(verbose);

  /* processing commandline */
  process_commandline(argc, argv, &inarea, &darker, &copy_pixel, &coloryuv,
                      &average_pixel);

  y4m_init_stream_info(&istream);
  y4m_init_stream_info(&ostream);
  y4m_init_frame_info(&iframe);

  /* First read the header of the y4m stream */
  i = y4m_read_stream_header(input_fd, &istream);
  
  if ( i != Y4M_OK)   /* a basic check if we really have y4m stream */
    mjpeg_error_exit1("Input stream error: %s", y4m_strerr(i));
  else 
    {
      /* Here we copy the input stream info to the output stream info header */
      y4m_copy_stream_info(&ostream, &istream);

      /* Here we write the new output header to the output fd */
      y4m_write_stream_header(output_fd, &ostream);

      horz = y4m_si_get_width(&istream);   /* get the width of the frame */
      vert = y4m_si_get_height(&istream);  /* get the height of the frame */

      if ( (inarea.width + inarea.hoffset) > horz)
      mjpeg_error_exit1("Input width and offset larger than framewidth,exit");
 
      if ( (inarea.height + inarea.voffset) > vert)
      mjpeg_error_exit1("Input height and offset larger than frameheight,exit");

      /* Here we allocate the memory for on frame */
      frame[0] = malloc( horz * vert );
      frame[1] = malloc( (horz/2) * (vert/2) );
      frame[2] = malloc( (horz/2) * (vert/2) );

      /* Here we set the initial number of of frames */
      /* We do not need it. Just for showing that is does something */
      frame_count = 0 ; 

      /* This is the main loop here can filters effects, scaling and so 
      on be done with the video frames. Just up to your mind */
      /* We read now a single frame with the header and check if it does not
      have any problems or we have alreaddy processed the last without data */
      while(y4m_read_frame(input_fd, &istream, &iframe, frame) == Y4M_OK)
        {
           frame_count++; 

           /* You can do something usefull here */
           if (darker != 0)
             set_darker(inarea, horz, vert, frame, darker);
           else if (copy_pixel != 0)
             copy_area(inarea, horz, vert, frame, copy_pixel);
           else if (average_pixel != 0)
             average_area(inarea, horz, vert, frame, average_pixel);
           else
             set_inactive(inarea, horz, vert, frame, &coloryuv);

           /* Now we put out the read frame */
           y4m_write_frame(output_fd, &ostream, &iframe, frame);
        }

      /* Cleaning up the data structures */
      y4m_fini_stream_info(&istream);
      y4m_fini_stream_info(&ostream);
      y4m_fini_frame_info(&iframe);

    }

    /* giving back the memory to the system */
    free(frame[0]);
    frame[0] = 0;
    free(frame[1]);
    frame[1] = 0;
    free(frame[2]);
    frame[2] = 0;

  exit(0); /* exiting */ 
}