示例#1
0
int
subprocess_flush_io (struct subprocess *p)
{
    zio_flush (p->zio_in);
    while (zio_read (p->zio_out) > 0) {};
    while (zio_read (p->zio_err) > 0) {};
    return (0);
}
示例#2
0
文件: zio.c 项目: surajpkn/flux-core
static int zio_read_cb_common (zio_t *zio)
{
    int rc = zio_read (zio);
    if ((rc < 0) && (errno == EAGAIN))
        rc = 0;
    return (rc);
}
示例#3
0
/*
 * Read in the data for the dmu_sync()ed block, and change the log
 * record to write this whole block.
 */
void
zil_get_replay_data(zilog_t *zilog, lr_write_t *lr)
{
	blkptr_t *wbp = &lr->lr_blkptr;
	char *wbuf = (char *)(lr + 1); /* data follows lr_write_t */
	uint64_t blksz;

	if (BP_IS_HOLE(wbp)) {	/* compressed to a hole */
		blksz = BP_GET_LSIZE(&lr->lr_blkptr);
		/*
		 * If the blksz is zero then we must be replaying a log
		 * from an version prior to setting the blksize of null blocks.
		 * So we just zero the actual write size reqeusted.
		 */
		if (blksz == 0) {
			bzero(wbuf, lr->lr_length);
			return;
		}
		bzero(wbuf, blksz);
	} else {
		/*
		 * A subsequent write may have overwritten this block, in which
		 * case wbp may have been been freed and reallocated, and our
		 * read of wbp may fail with a checksum error.  We can safely
		 * ignore this because the later write will provide the
		 * correct data.
		 */
		zbookmark_t zb;

		zb.zb_objset = dmu_objset_id(zilog->zl_os);
		zb.zb_object = lr->lr_foid;
		zb.zb_level = 0;
		zb.zb_blkid = -1; /* unknown */

		blksz = BP_GET_LSIZE(&lr->lr_blkptr);
		(void) zio_wait(zio_read(NULL, zilog->zl_spa, wbp, wbuf, blksz,
		    NULL, NULL, ZIO_PRIORITY_SYNC_READ,
		    ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE, &zb));
	}
	lr->lr_offset -= lr->lr_offset % blksz;
	lr->lr_length = blksz;
}
示例#4
0
文件: binary.c 项目: jokester/eb
/*
 * Set monochrome bitmap picture as the current binary data.
 */
EB_Error_Code
eb_set_binary_gray_graphic(EB_Book *book, const EB_Position *position,
    int width, int height)
{
    EB_Error_Code error_code;
    EB_Binary_Context *context;
    EB_Position real_position;
    unsigned char *buffer_p;
    size_t line_pad_length;
    size_t data_size;
    size_t file_size;

    eb_lock(&book->lock);
    LOG(("in: eb_set_binary_gray_graphic(book=%d, position={%d,%d}, \
width=%d, height=%d)",
	(int)book->code, position->page, position->offset, width, height));

    eb_reset_binary_context(book);

    /*
     * Current subbook must have been set.
     */
    if (book->subbook_current == NULL) {
	error_code = EB_ERR_NO_CUR_SUB;
	goto failed;
    }

    /*
     * Current subbook must have a graphic file.
     */
    if (zio_file(&book->subbook_current->text_zio) < 0) {
	error_code = EB_ERR_NO_SUCH_BINARY;
	goto failed;
    }

    /*
     * If both width and height are 0,
     * we get real width, height and position of the graphic data.
     */
    if (position->page <= 0 || position->offset < 0) {
	error_code = EB_ERR_FAIL_SEEK_BINARY;
	goto failed;
    }

    if (width == 0 && height == 0) {
	char buffer[22];

	if (zio_lseek(&book->subbook_current->text_zio,
	    ((off_t) position->page - 1) * EB_SIZE_PAGE + position->offset,
	    SEEK_SET) < 0) {
	    error_code = EB_ERR_FAIL_SEEK_BINARY;
	    goto failed;
	}

	if (zio_read(&book->subbook_current->text_zio, buffer, 22) != 22) {
	    error_code = EB_ERR_FAIL_READ_BINARY;
	    goto failed;
	}
	if (eb_uint2(buffer) != 0x1f45
	    || eb_uint2(buffer + 4) != 0x1f31
	    || eb_uint2(buffer + 12) != 0x1f51
	    || eb_uint2(buffer + 20) != 0x1f65) {
	    error_code = EB_ERR_UNEXP_BINARY;
	    goto failed;
	}

	width = eb_bcd2(buffer + 8);
	height = eb_bcd2(buffer + 10);
	real_position.page = eb_bcd4(buffer + 14);
	real_position.offset = eb_bcd2(buffer + 18);
	position = &real_position;
    }

    if (width <= 0 || height <= 0) {
	error_code = EB_ERR_NO_SUCH_BINARY;
	goto failed;
    }

    /*
     * BMP requires that the number of bytes in a line must be multiple
     * of 4.  If not, 0x00 must be padded to end of each line.
     * `line_pad_length' (0...3) is the number of bytes to be padded.
     *
     * In case of EB_BINARY_GRAY_GRAPHIC, a pixel is represented with
     * 4 bits.
     */
    if (width % 8 == 0)
	line_pad_length = 0;
    else if (width % 8 <= 2)
	line_pad_length = 3;
    else if (width % 8 <= 4)
	line_pad_length = 2;
    else if (width % 8 <= 6)
	line_pad_length = 1;
    else
	line_pad_length = 0;

    data_size = (width / 2 + line_pad_length) * height;
    file_size = data_size + MONO_BMP_PREAMBLE_LENGTH;

    /*
     * Set binary context.
     */
    context = &book->binary_context;

    context->code = EB_BINARY_GRAY_GRAPHIC;
    context->zio = &book->subbook_current->text_zio;
    context->location = ((off_t) position->page - 1) * EB_SIZE_PAGE
	+ position->offset + (width + 1) / 2 * (height - 1);
    context->size = (width + 1) / 2 * height;
    context->offset = 0;
    context->cache_offset = 0;
    context->width = width;

    /*
     * Set BMP preamble.
     */
    context->cache_length = GRAY_BMP_PREAMBLE_LENGTH;
    memcpy(context->cache_buffer, gray_bmp_preamble,
	GRAY_BMP_PREAMBLE_LENGTH);

    buffer_p = (unsigned char *)context->cache_buffer + 2;
    *buffer_p++ =  file_size        & 0xff;
    *buffer_p++ = (file_size >> 8)  & 0xff;
    *buffer_p++ = (file_size >> 16) & 0xff;
    *buffer_p++ = (file_size >> 24) & 0xff;

    buffer_p = (unsigned char *)context->cache_buffer + 18;
    *buffer_p++ =  width        & 0xff;
    *buffer_p++ = (width >> 8)  & 0xff;
    *buffer_p++ = (width >> 16) & 0xff;
    *buffer_p++ = (width >> 24) & 0xff;

    *buffer_p++ =  height        & 0xff;
    *buffer_p++ = (height >> 8)  & 0xff;
    *buffer_p++ = (height >> 16) & 0xff;
    *buffer_p++ = (height >> 24) & 0xff;

    buffer_p = (unsigned char *)context->cache_buffer + 34;
    *buffer_p++ =  data_size        & 0xff;
    *buffer_p++ = (data_size >> 8)  & 0xff;
    *buffer_p++ = (data_size >> 16) & 0xff;
    *buffer_p++ = (data_size >> 24) & 0xff;

    /*
     * Seek graphic file.
     */
    if (zio_lseek(context->zio, context->location, SEEK_SET) < 0) {
	error_code = EB_ERR_FAIL_SEEK_BINARY;
	goto failed;
    }

    LOG(("out: eb_set_binary_gray_graphic() = %s",
	eb_error_string(EB_SUCCESS)));
    eb_unlock(&book->lock);

    return EB_SUCCESS;

    /*
     * An error occurs...
     */
  failed:
    eb_reset_binary_context(book);
    LOG(("out: eb_set_binary_gray_graphic() = %s",
	eb_error_string(error_code)));
    eb_unlock(&book->lock);
    return error_code;
}
示例#5
0
文件: zdb_il.c 项目: Acidburn0zzz/zfs
/* ARGSUSED */
static void
zil_prt_rec_write(zilog_t *zilog, int txtype, lr_write_t *lr)
{
	char *data, *dlimit;
	blkptr_t *bp = &lr->lr_blkptr;
	zbookmark_phys_t zb;
	char buf[SPA_MAXBLOCKSIZE];
	int verbose = MAX(dump_opt['d'], dump_opt['i']);
	int error;

	(void) printf("%sfoid %llu, offset %llx, length %llx\n", prefix,
	    (u_longlong_t)lr->lr_foid, (u_longlong_t)lr->lr_offset,
	    (u_longlong_t)lr->lr_length);

	if (txtype == TX_WRITE2 || verbose < 5)
		return;

	if (lr->lr_common.lrc_reclen == sizeof (lr_write_t)) {
		(void) printf("%shas blkptr, %s\n", prefix,
		    !BP_IS_HOLE(bp) &&
		    bp->blk_birth >= spa_first_txg(zilog->zl_spa) ?
		    "will claim" : "won't claim");
		print_log_bp(bp, prefix);

		if (BP_IS_HOLE(bp)) {
			(void) printf("\t\t\tLSIZE 0x%llx\n",
			    (u_longlong_t)BP_GET_LSIZE(bp));
			bzero(buf, sizeof (buf));
			(void) printf("%s<hole>\n", prefix);
			return;
		}
		if (bp->blk_birth < zilog->zl_header->zh_claim_txg) {
			(void) printf("%s<block already committed>\n", prefix);
			return;
		}

		SET_BOOKMARK(&zb, dmu_objset_id(zilog->zl_os),
		    lr->lr_foid, ZB_ZIL_LEVEL,
		    lr->lr_offset / BP_GET_LSIZE(bp));

		error = zio_wait(zio_read(NULL, zilog->zl_spa,
		    bp, buf, BP_GET_LSIZE(bp), NULL, NULL,
		    ZIO_PRIORITY_SYNC_READ, ZIO_FLAG_CANFAIL, &zb));
		if (error)
			return;
		data = buf;
	} else {
		data = (char *)(lr + 1);
	}

	dlimit = data + MIN(lr->lr_length,
	    (verbose < 6 ? 20 : SPA_MAXBLOCKSIZE));

	(void) printf("%s", prefix);
	while (data < dlimit) {
		if (isprint(*data))
			(void) printf("%c ", *data);
		else
			(void) printf("%2hhX", *data);
		data++;
	}
	(void) printf("\n");
}
示例#6
0
文件: unzipfile.c 项目: jokester/eb
/*
 * Internal function for ebzip_unzip_file() and ebzip_unzip_sebxa_start().
 * If it succeeds, 0 is returned.  Otherwise -1 is returned.
 */
static int
ebzip_unzip_file_internal(const char *out_file_name, const char *in_file_name,
    Zio_Code in_zio_code, int index_page)
{
    Zio in_zio;
    unsigned char *buffer = NULL;
    off_t total_length;
    int out_file = -1;
    ssize_t length;
    struct stat in_status, out_status;
    unsigned int crc = 1;
    int progress_interval;
    int total_slices;
    int i;

    zio_initialize(&in_zio);

    /*
     * Simply copy a file, when an input file is not compressed.
     */
    if (in_zio_code == ZIO_PLAIN)
	return ebzip_copy_file(out_file_name, in_file_name);

    /*
     * Output file name information.
     */
    if (!ebzip_quiet_flag) {
	fprintf(stderr, _("==> uncompress %s <==\n"), in_file_name);
	fprintf(stderr, _("output to %s\n"), out_file_name);
	fflush(stderr);
    }

    /*
     * Get status of the input file.
     */
    if (stat(in_file_name, &in_status) < 0 || !S_ISREG(in_status.st_mode)) {
        fprintf(stderr, _("%s: no such file: %s\n"), invoked_name,
            in_file_name);
        goto failed;
    }

    /*
     * Do nothing if the `in_file_name' and `out_file_name' are the same.
     */
    if (is_same_file(out_file_name, in_file_name)) {
	if (!ebzip_quiet_flag) {
	    fprintf(stderr,
		_("the input and output files are the same, skipped.\n\n"));
	    fflush(stderr);
	}
	return 0;
    }

    /*
     * Allocate memories for in/out buffers.
     */
    buffer = (unsigned char *)malloc(EB_SIZE_PAGE << ZIO_MAX_EBZIP_LEVEL);
    if (buffer == NULL) {
	fprintf(stderr, _("%s: memory exhausted\n"), invoked_name);
	goto failed;
    }

    /*
     * If the file `out_file_name' already exists, confirm and unlink it.
     */
    if (!ebzip_test_flag
	&& stat(out_file_name, &out_status) == 0
	&& S_ISREG(out_status.st_mode)) {
	if (ebzip_overwrite_mode == EBZIP_OVERWRITE_NO) {
	    if (!ebzip_quiet_flag) {
		fputs(_("already exists, skip the file\n\n"), stderr);
		fflush(stderr);
	    }
	    return 0;
	} else if (ebzip_overwrite_mode == EBZIP_OVERWRITE_CONFIRM) {
	    int y_or_n;

	    fprintf(stderr, _("\nthe file already exists: %s\n"),
		out_file_name);
	    y_or_n = query_y_or_n(_("do you wish to overwrite (y or n)? "));
	    fputc('\n', stderr);
	    fflush(stderr);
	    if (!y_or_n)
		return 0;
        }
	if (unlink(out_file_name) < 0) {
	    fprintf(stderr, _("%s: failed to unlink the file: %s\n"),
		invoked_name, out_file_name);
	    goto failed;
	}
    }

    /*
     * Open files.
     */
    if (zio_open(&in_zio, in_file_name, in_zio_code) < 0) {
	fprintf(stderr, _("%s: failed to open the file: %s\n"),
	    invoked_name, in_file_name);
	goto failed;
    }
    if (in_zio_code == ZIO_SEBXA) {
	off_t index_location;
	off_t index_base;
	off_t zio_start_location;
	off_t zio_end_location;

	if (get_sebxa_indexes(in_file_name, index_page, &index_location,
	    &index_base, &zio_start_location, &zio_end_location) < 0) {
	    goto failed;
	}
	zio_set_sebxa_mode(&in_zio, index_location, index_base,
	    zio_start_location, zio_end_location);
    }

    if (!ebzip_test_flag) {
	trap_file_name = out_file_name;
#ifdef SIGHUP
	signal(SIGHUP, trap);
#endif
	signal(SIGINT, trap);
#ifdef SIGQUIT
	signal(SIGQUIT, trap);
#endif
#ifdef SIGTERM
	signal(SIGTERM, trap);
#endif

#ifdef O_CREAT
	out_file = open(out_file_name, O_CREAT | O_TRUNC | O_WRONLY | O_BINARY,
	    0666 ^ get_umask());
#else
	out_file = creat(out_file_name, 0666 ^ get_umask());
#endif
	if (out_file < 0) {
	    fprintf(stderr, _("%s: failed to open the file: %s\n"),
		invoked_name, out_file_name);
	    goto failed;
	}
	trap_file = out_file;
    }

    /*
     * Read a slice from the input file, uncompress it if required,
     * and then write it to the output file.
     */
    total_length = 0;
    total_slices = (in_zio.file_size + in_zio.slice_size - 1)
	/ in_zio.slice_size;
    progress_interval = EBZIP_PROGRESS_INTERVAL_FACTOR;
    if (((total_slices + 999) / 1000) > progress_interval)
	progress_interval = ((total_slices + 999) / 1000);

    for (i = 0; i < total_slices; i++) {
	/*
	 * Read a slice.
	 */
	if (zio_lseek(&in_zio, total_length, SEEK_SET) < 0) {
	    fprintf(stderr, _("%s: failed to seek the file: %s\n"),
		invoked_name, in_file_name);
	    goto failed;
	}
	length = zio_read(&in_zio, (char *)buffer, in_zio.slice_size);
	if (length < 0) {
	    fprintf(stderr, _("%s: failed to read from the file: %s\n"),
		invoked_name, in_file_name);
	    goto failed;
	} else if (length == 0) {
	    fprintf(stderr, _("%s: unexpected EOF: %s\n"),
		invoked_name, in_file_name);
	    goto failed;
	} else if (length != in_zio.slice_size
	    && total_length + length != in_zio.file_size) {
	    fprintf(stderr, _("%s: unexpected EOF: %s\n"),
		invoked_name, in_file_name);
	    goto failed;
	}

	/*
	 * Update CRC.  (Calculate adler32 again.)
	 */
	if (in_zio.code == ZIO_EBZIP1)
	    crc = adler32((uLong)crc, (Bytef *)buffer, (uInt)length);

	/*
	 * Write the slice to `out_file'.
	 */
	if (!ebzip_test_flag) {
	    if (write(out_file, buffer, length) != length) {
		fprintf(stderr, _("%s: failed to write to the file, %s: %s\n"),
		    invoked_name, strerror(errno), out_file_name);
		goto failed;
	    }
	}
	total_length += length;

	/*
	 * Output status information unless `quiet' mode.
	 */
	if (!ebzip_quiet_flag && (i + 1) % progress_interval == 0) {
#if defined(PRINTF_LL_MODIFIER)
	    fprintf(stderr, _("%4.1f%% done (%llu / %llu bytes)\n"),
		(double) (i + 1) * 100.0 / (double) total_slices,
		(unsigned long long) total_length,
		(unsigned long long) in_zio.file_size);
#elif defined(PRINTF_I64_MODIFIER)
	    fprintf(stderr, _("%4.1f%% done (%I64u / %I64u bytes)\n"),
		(double) (i + 1) * 100.0 / (double) total_slices,
		(unsigned __int64) total_length,
		(unsigned __int64) in_zio.file_size);
#else
	    fprintf(stderr, _("%4.1f%% done (%lu / %lu bytes)\n"),
		(double) (i + 1) * 100.0 / (double) total_slices,
		(unsigned long) total_length,
		(unsigned long) in_zio.file_size);
#endif
	    fflush(stderr);
	}
    }

    /*
     * Output the result unless quiet mode.
     */
    if (!ebzip_quiet_flag) {
#if defined(PRINTF_LL_MODIFIER)
	fprintf(stderr, _("completed (%llu / %llu bytes)\n"),
	    (unsigned long long) in_zio.file_size,
	    (unsigned long long) in_zio.file_size);
#elif defined(PRINTF_I64_MODIFIER)
	fprintf(stderr, _("completed (%I64u / %I64u bytes)\n"),
	    (unsigned __int64) in_zio.file_size,
	    (unsigned __int64) in_zio.file_size);
#else
	fprintf(stderr, _("%lu -> %lu bytes\n\n"),
	    (unsigned long) in_status.st_size,
	    (unsigned long) total_length);
#endif
	fflush(stderr);
    }

    /*
     * Close files.
     */
    zio_close(&in_zio);
    zio_finalize(&in_zio);

    if (!ebzip_test_flag) {
	close(out_file);
	out_file = -1;
	trap_file = -1;
	trap_file_name = NULL;
#ifdef SIGHUP
	signal(SIGHUP, SIG_DFL);
#endif
	signal(SIGINT, SIG_DFL);
#ifdef SIGQUIT
	signal(SIGQUIT, SIG_DFL);
#endif
#ifdef SIGTERM
	signal(SIGTERM, SIG_DFL);
#endif
    }

    /*
     * Check for CRC.
     */
    if (in_zio.code == ZIO_EBZIP1 && in_zio.crc != crc) {
	fprintf(stderr, _("%s: CRC error: %s\n"), invoked_name, out_file_name);
	goto failed;
    }

    /*
     * Delete an original file unless the keep flag is set.
     */
    if (!ebzip_test_flag && !ebzip_keep_flag)
	unlink_files_add(in_file_name);

    /*
     * Set owner, group, permission, atime and mtime of `out_file'.
     * We ignore return values of `chown', `chmod' and `utime'.
     */
    if (!ebzip_test_flag) {
	struct utimbuf utim;

	utim.actime = in_status.st_atime;
	utim.modtime = in_status.st_mtime;
	utime(out_file_name, &utim);
    }

    /*
     * Dispose memories.
     */
    free(buffer);

    return 0;

    /*
     * An error occurs...
     */
  failed:
    if (buffer != NULL)
	free(buffer);

    zio_close(&in_zio);
    zio_finalize(&in_zio);

    if (0 <= out_file) {
	close(out_file);
	trap_file = -1;
	trap_file_name = NULL;
#ifdef SIGHUP
	signal(SIGHUP, SIG_DFL);
#endif
	signal(SIGINT, SIG_DFL);
#ifdef SIGQUIT
	signal(SIGQUIT, SIG_DFL);
#endif
#ifdef SIGTERM
	signal(SIGTERM, SIG_DFL);
#endif
    }

    fputc('\n', stderr);
    fflush(stderr);

    return -1;
}
示例#7
0
文件: zil.c 项目: harshada/zfs
static void
zil_replay_log_record(zilog_t *zilog, lr_t *lr, void *zra, uint64_t claim_txg)
{
	zil_replay_arg_t *zr = zra;
	const zil_header_t *zh = zilog->zl_header;
	uint64_t reclen = lr->lrc_reclen;
	uint64_t txtype = lr->lrc_txtype;
	char *name;
	int pass, error;

	if (!zilog->zl_replay)			/* giving up */
		return;

	if (lr->lrc_txg < claim_txg)		/* already committed */
		return;

	if (lr->lrc_seq <= zh->zh_replay_seq)	/* already replayed */
		return;

	/* Strip case-insensitive bit, still present in log record */
	txtype &= ~TX_CI;

	if (txtype == 0 || txtype >= TX_MAX_TYPE) {
		error = EINVAL;
		goto bad;
	}

	/*
	 * Make a copy of the data so we can revise and extend it.
	 */
	bcopy(lr, zr->zr_lrbuf, reclen);

	/*
	 * The log block containing this lr may have been byteswapped
	 * so that we can easily examine common fields like lrc_txtype.
	 * However, the log is a mix of different data types, and only the
	 * replay vectors know how to byteswap their records.  Therefore, if
	 * the lr was byteswapped, undo it before invoking the replay vector.
	 */
	if (zr->zr_byteswap)
		byteswap_uint64_array(zr->zr_lrbuf, reclen);

	/*
	 * If this is a TX_WRITE with a blkptr, suck in the data.
	 */
	if (txtype == TX_WRITE && reclen == sizeof (lr_write_t)) {
		lr_write_t *lrw = (lr_write_t *)lr;
		blkptr_t *wbp = &lrw->lr_blkptr;
		uint64_t wlen = lrw->lr_length;
		char *wbuf = zr->zr_lrbuf + reclen;

		if (BP_IS_HOLE(wbp)) {	/* compressed to a hole */
			bzero(wbuf, wlen);
		} else {
			/*
			 * A subsequent write may have overwritten this block,
			 * in which case wbp may have been been freed and
			 * reallocated, and our read of wbp may fail with a
			 * checksum error.  We can safely ignore this because
			 * the later write will provide the correct data.
			 */
			zbookmark_t zb;

			zb.zb_objset = dmu_objset_id(zilog->zl_os);
			zb.zb_object = lrw->lr_foid;
			zb.zb_level = -1;
			zb.zb_blkid = lrw->lr_offset / BP_GET_LSIZE(wbp);

			(void) zio_wait(zio_read(NULL, zilog->zl_spa,
			    wbp, wbuf, BP_GET_LSIZE(wbp), NULL, NULL,
			    ZIO_PRIORITY_SYNC_READ,
			    ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE, &zb));
			(void) memmove(wbuf, wbuf + lrw->lr_blkoff, wlen);
		}
	}

	/*
	 * We must now do two things atomically: replay this log record,
	 * and update the log header sequence number to reflect the fact that
	 * we did so. At the end of each replay function the sequence number
	 * is updated if we are in replay mode.
	 */
	for (pass = 1; pass <= 2; pass++) {
		zilog->zl_replaying_seq = lr->lrc_seq;
		/* Only byteswap (if needed) on the 1st pass.  */
		error = zr->zr_replay[txtype](zr->zr_arg, zr->zr_lrbuf,
		    zr->zr_byteswap && pass == 1);

		if (!error)
			return;

		/*
		 * The DMU's dnode layer doesn't see removes until the txg
		 * commits, so a subsequent claim can spuriously fail with
		 * EEXIST. So if we receive any error we try syncing out
		 * any removes then retry the transaction.
		 */
		if (pass == 1)
			txg_wait_synced(spa_get_dsl(zilog->zl_spa), 0);
	}

bad:
	ASSERT(error);
	name = kmem_alloc(MAXNAMELEN, KM_SLEEP);
	dmu_objset_name(zr->zr_os, name);
	cmn_err(CE_WARN, "ZFS replay transaction error %d, "
	    "dataset %s, seq 0x%llx, txtype %llu %s\n",
	    error, name, (u_longlong_t)lr->lrc_seq, (u_longlong_t)txtype,
	    (lr->lrc_txtype & TX_CI) ? "CI" : "");
	zilog->zl_replay = B_FALSE;
	kmem_free(name, MAXNAMELEN);
}