void ARMFrameLowering::emitPrologue(MachineFunction &MF) const { MachineBasicBlock &MBB = MF.front(); MachineBasicBlock::iterator MBBI = MBB.begin(); MachineFrameInfo *MFI = MF.getFrameInfo(); ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>(); const ARMBaseRegisterInfo *RegInfo = static_cast<const ARMBaseRegisterInfo*>(MF.getTarget().getRegisterInfo()); const ARMBaseInstrInfo &TII = *static_cast<const ARMBaseInstrInfo*>(MF.getTarget().getInstrInfo()); assert(!AFI->isThumb1OnlyFunction() && "This emitPrologue does not support Thumb1!"); bool isARM = !AFI->isThumbFunction(); unsigned VARegSaveSize = AFI->getVarArgsRegSaveSize(); unsigned NumBytes = MFI->getStackSize(); const std::vector<CalleeSavedInfo> &CSI = MFI->getCalleeSavedInfo(); DebugLoc dl = MBBI != MBB.end() ? MBBI->getDebugLoc() : DebugLoc(); unsigned FramePtr = RegInfo->getFrameRegister(MF); // Determine the sizes of each callee-save spill areas and record which frame // belongs to which callee-save spill areas. unsigned GPRCS1Size = 0, GPRCS2Size = 0, DPRCSSize = 0; int FramePtrSpillFI = 0; // Allocate the vararg register save area. This is not counted in NumBytes. if (VARegSaveSize) emitSPUpdate(isARM, MBB, MBBI, dl, TII, -VARegSaveSize, MachineInstr::FrameSetup); if (!AFI->hasStackFrame()) { if (NumBytes != 0) emitSPUpdate(isARM, MBB, MBBI, dl, TII, -NumBytes, MachineInstr::FrameSetup); return; } for (unsigned i = 0, e = CSI.size(); i != e; ++i) { unsigned Reg = CSI[i].getReg(); int FI = CSI[i].getFrameIdx(); switch (Reg) { case ARM::R4: case ARM::R5: case ARM::R6: case ARM::R7: case ARM::LR: if (Reg == FramePtr) FramePtrSpillFI = FI; AFI->addGPRCalleeSavedArea1Frame(FI); GPRCS1Size += 4; break; case ARM::R8: case ARM::R9: case ARM::R10: case ARM::R11: if (Reg == FramePtr) FramePtrSpillFI = FI; if (STI.isTargetDarwin()) { AFI->addGPRCalleeSavedArea2Frame(FI); GPRCS2Size += 4; } else { AFI->addGPRCalleeSavedArea1Frame(FI); GPRCS1Size += 4; } break; default: AFI->addDPRCalleeSavedAreaFrame(FI); DPRCSSize += 8; } } // Move past area 1. if (GPRCS1Size > 0) MBBI++; // Set FP to point to the stack slot that contains the previous FP. // For Darwin, FP is R7, which has now been stored in spill area 1. // Otherwise, if this is not Darwin, all the callee-saved registers go // into spill area 1, including the FP in R11. In either case, it is // now safe to emit this assignment. bool HasFP = hasFP(MF); if (HasFP) { unsigned ADDriOpc = !AFI->isThumbFunction() ? ARM::ADDri : ARM::t2ADDri; MachineInstrBuilder MIB = BuildMI(MBB, MBBI, dl, TII.get(ADDriOpc), FramePtr) .addFrameIndex(FramePtrSpillFI).addImm(0) .setMIFlag(MachineInstr::FrameSetup); AddDefaultCC(AddDefaultPred(MIB)); } // Move past area 2. if (GPRCS2Size > 0) MBBI++; // Determine starting offsets of spill areas. unsigned DPRCSOffset = NumBytes - (GPRCS1Size + GPRCS2Size + DPRCSSize); unsigned GPRCS2Offset = DPRCSOffset + DPRCSSize; unsigned GPRCS1Offset = GPRCS2Offset + GPRCS2Size; if (HasFP) AFI->setFramePtrSpillOffset(MFI->getObjectOffset(FramePtrSpillFI) + NumBytes); AFI->setGPRCalleeSavedArea1Offset(GPRCS1Offset); AFI->setGPRCalleeSavedArea2Offset(GPRCS2Offset); AFI->setDPRCalleeSavedAreaOffset(DPRCSOffset); // Move past area 3. if (DPRCSSize > 0) { MBBI++; // Since vpush register list cannot have gaps, there may be multiple vpush // instructions in the prologue. while (MBBI->getOpcode() == ARM::VSTMDDB_UPD) MBBI++; } NumBytes = DPRCSOffset; if (NumBytes) { // Adjust SP after all the callee-save spills. emitSPUpdate(isARM, MBB, MBBI, dl, TII, -NumBytes, MachineInstr::FrameSetup); if (HasFP && isARM) // Restore from fp only in ARM mode: e.g. sub sp, r7, #24 // Note it's not safe to do this in Thumb2 mode because it would have // taken two instructions: // mov sp, r7 // sub sp, #24 // If an interrupt is taken between the two instructions, then sp is in // an inconsistent state (pointing to the middle of callee-saved area). // The interrupt handler can end up clobbering the registers. AFI->setShouldRestoreSPFromFP(true); } if (STI.isTargetELF() && hasFP(MF)) MFI->setOffsetAdjustment(MFI->getOffsetAdjustment() - AFI->getFramePtrSpillOffset()); AFI->setGPRCalleeSavedArea1Size(GPRCS1Size); AFI->setGPRCalleeSavedArea2Size(GPRCS2Size); AFI->setDPRCalleeSavedAreaSize(DPRCSSize); // If we need dynamic stack realignment, do it here. Be paranoid and make // sure if we also have VLAs, we have a base pointer for frame access. if (RegInfo->needsStackRealignment(MF)) { unsigned MaxAlign = MFI->getMaxAlignment(); assert (!AFI->isThumb1OnlyFunction()); if (!AFI->isThumbFunction()) { // Emit bic sp, sp, MaxAlign AddDefaultCC(AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::BICri), ARM::SP) .addReg(ARM::SP, RegState::Kill) .addImm(MaxAlign-1))); } else { // We cannot use sp as source/dest register here, thus we're emitting the // following sequence: // mov r4, sp // bic r4, r4, MaxAlign // mov sp, r4 // FIXME: It will be better just to find spare register here. AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), ARM::R4) .addReg(ARM::SP, RegState::Kill)); AddDefaultCC(AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::t2BICri), ARM::R4) .addReg(ARM::R4, RegState::Kill) .addImm(MaxAlign-1))); AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), ARM::SP) .addReg(ARM::R4, RegState::Kill)); } AFI->setShouldRestoreSPFromFP(true); } // If we need a base pointer, set it up here. It's whatever the value // of the stack pointer is at this point. Any variable size objects // will be allocated after this, so we can still use the base pointer // to reference locals. // FIXME: Clarify FrameSetup flags here. if (RegInfo->hasBasePointer(MF)) { if (isARM) BuildMI(MBB, MBBI, dl, TII.get(ARM::MOVr), RegInfo->getBaseRegister()) .addReg(ARM::SP) .addImm((unsigned)ARMCC::AL).addReg(0).addReg(0); else AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), RegInfo->getBaseRegister()) .addReg(ARM::SP)); } // If the frame has variable sized objects then the epilogue must restore // the sp from fp. We can assume there's an FP here since hasFP already // checks for hasVarSizedObjects. if (MFI->hasVarSizedObjects()) AFI->setShouldRestoreSPFromFP(true); }
void Thumb1FrameLowering::emitPrologue(MachineFunction &MF) const { MachineBasicBlock &MBB = MF.front(); MachineBasicBlock::iterator MBBI = MBB.begin(); MachineFrameInfo *MFI = MF.getFrameInfo(); ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>(); const Thumb1RegisterInfo *RegInfo = static_cast<const Thumb1RegisterInfo*>(MF.getTarget().getRegisterInfo()); const Thumb1InstrInfo &TII = *static_cast<const Thumb1InstrInfo*>(MF.getTarget().getInstrInfo()); unsigned VARegSaveSize = AFI->getVarArgsRegSaveSize(); unsigned NumBytes = MFI->getStackSize(); const std::vector<CalleeSavedInfo> &CSI = MFI->getCalleeSavedInfo(); DebugLoc dl = MBBI != MBB.end() ? MBBI->getDebugLoc() : DebugLoc(); unsigned FramePtr = RegInfo->getFrameRegister(MF); unsigned BasePtr = RegInfo->getBaseRegister(); // Thumb add/sub sp, imm8 instructions implicitly multiply the offset by 4. NumBytes = (NumBytes + 3) & ~3; MFI->setStackSize(NumBytes); // Determine the sizes of each callee-save spill areas and record which frame // belongs to which callee-save spill areas. unsigned GPRCS1Size = 0, GPRCS2Size = 0, DPRCSSize = 0; int FramePtrSpillFI = 0; if (VARegSaveSize) emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -VARegSaveSize, MachineInstr::FrameSetup); if (!AFI->hasStackFrame()) { if (NumBytes != 0) emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -NumBytes, MachineInstr::FrameSetup); return; } for (unsigned i = 0, e = CSI.size(); i != e; ++i) { unsigned Reg = CSI[i].getReg(); int FI = CSI[i].getFrameIdx(); switch (Reg) { case ARM::R4: case ARM::R5: case ARM::R6: case ARM::R7: case ARM::LR: if (Reg == FramePtr) FramePtrSpillFI = FI; AFI->addGPRCalleeSavedArea1Frame(FI); GPRCS1Size += 4; break; case ARM::R8: case ARM::R9: case ARM::R10: case ARM::R11: if (Reg == FramePtr) FramePtrSpillFI = FI; if (STI.isTargetDarwin()) { AFI->addGPRCalleeSavedArea2Frame(FI); GPRCS2Size += 4; } else { AFI->addGPRCalleeSavedArea1Frame(FI); GPRCS1Size += 4; } break; default: AFI->addDPRCalleeSavedAreaFrame(FI); DPRCSSize += 8; } } if (MBBI != MBB.end() && MBBI->getOpcode() == ARM::tPUSH) { ++MBBI; if (MBBI != MBB.end()) dl = MBBI->getDebugLoc(); } // Determine starting offsets of spill areas. unsigned DPRCSOffset = NumBytes - (GPRCS1Size + GPRCS2Size + DPRCSSize); unsigned GPRCS2Offset = DPRCSOffset + DPRCSSize; unsigned GPRCS1Offset = GPRCS2Offset + GPRCS2Size; AFI->setFramePtrSpillOffset(MFI->getObjectOffset(FramePtrSpillFI) + NumBytes); AFI->setGPRCalleeSavedArea1Offset(GPRCS1Offset); AFI->setGPRCalleeSavedArea2Offset(GPRCS2Offset); AFI->setDPRCalleeSavedAreaOffset(DPRCSOffset); NumBytes = DPRCSOffset; // Adjust FP so it point to the stack slot that contains the previous FP. if (hasFP(MF)) { AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tADDrSPi), FramePtr) .addFrameIndex(FramePtrSpillFI).addImm(0) .setMIFlags(MachineInstr::FrameSetup)); if (NumBytes > 508) // If offset is > 508 then sp cannot be adjusted in a single instruction, // try restoring from fp instead. AFI->setShouldRestoreSPFromFP(true); } if (NumBytes) // Insert it after all the callee-save spills. emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -NumBytes, MachineInstr::FrameSetup); if (STI.isTargetELF() && hasFP(MF)) MFI->setOffsetAdjustment(MFI->getOffsetAdjustment() - AFI->getFramePtrSpillOffset()); AFI->setGPRCalleeSavedArea1Size(GPRCS1Size); AFI->setGPRCalleeSavedArea2Size(GPRCS2Size); AFI->setDPRCalleeSavedAreaSize(DPRCSSize); // If we need a base pointer, set it up here. It's whatever the value // of the stack pointer is at this point. Any variable size objects // will be allocated after this, so we can still use the base pointer // to reference locals. if (RegInfo->hasBasePointer(MF)) AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), BasePtr) .addReg(ARM::SP)); // If the frame has variable sized objects then the epilogue must restore // the sp from fp. We can assume there's an FP here since hasFP already // checks for hasVarSizedObjects. if (MFI->hasVarSizedObjects()) AFI->setShouldRestoreSPFromFP(true); }
void Thumb1RegisterInfo::emitPrologue(MachineFunction &MF) const { MachineBasicBlock &MBB = MF.front(); MachineBasicBlock::iterator MBBI = MBB.begin(); MachineFrameInfo *MFI = MF.getFrameInfo(); ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>(); unsigned VARegSaveSize = AFI->getVarArgsRegSaveSize(); unsigned NumBytes = MFI->getStackSize(); const std::vector<CalleeSavedInfo> &CSI = MFI->getCalleeSavedInfo(); DebugLoc dl = (MBBI != MBB.end() ? MBBI->getDebugLoc() : DebugLoc::getUnknownLoc()); // Thumb add/sub sp, imm8 instructions implicitly multiply the offset by 4. NumBytes = (NumBytes + 3) & ~3; MFI->setStackSize(NumBytes); // Determine the sizes of each callee-save spill areas and record which frame // belongs to which callee-save spill areas. unsigned GPRCS1Size = 0, GPRCS2Size = 0, DPRCSSize = 0; int FramePtrSpillFI = 0; if (VARegSaveSize) emitSPUpdate(MBB, MBBI, TII, dl, *this, -VARegSaveSize); if (!AFI->hasStackFrame()) { if (NumBytes != 0) emitSPUpdate(MBB, MBBI, TII, dl, *this, -NumBytes); return; } for (unsigned i = 0, e = CSI.size(); i != e; ++i) { unsigned Reg = CSI[i].getReg(); int FI = CSI[i].getFrameIdx(); switch (Reg) { case ARM::R4: case ARM::R5: case ARM::R6: case ARM::R7: case ARM::LR: if (Reg == FramePtr) FramePtrSpillFI = FI; AFI->addGPRCalleeSavedArea1Frame(FI); GPRCS1Size += 4; break; case ARM::R8: case ARM::R9: case ARM::R10: case ARM::R11: if (Reg == FramePtr) FramePtrSpillFI = FI; if (STI.isTargetDarwin()) { AFI->addGPRCalleeSavedArea2Frame(FI); GPRCS2Size += 4; } else { AFI->addGPRCalleeSavedArea1Frame(FI); GPRCS1Size += 4; } break; default: AFI->addDPRCalleeSavedAreaFrame(FI); DPRCSSize += 8; } } if (MBBI != MBB.end() && MBBI->getOpcode() == ARM::tPUSH) { ++MBBI; if (MBBI != MBB.end()) dl = MBBI->getDebugLoc(); } // Darwin ABI requires FP to point to the stack slot that contains the // previous FP. if (STI.isTargetDarwin() || hasFP(MF)) { BuildMI(MBB, MBBI, dl, TII.get(ARM::tADDrSPi), FramePtr) .addFrameIndex(FramePtrSpillFI).addImm(0); } // Determine starting offsets of spill areas. unsigned DPRCSOffset = NumBytes - (GPRCS1Size + GPRCS2Size + DPRCSSize); unsigned GPRCS2Offset = DPRCSOffset + DPRCSSize; unsigned GPRCS1Offset = GPRCS2Offset + GPRCS2Size; AFI->setFramePtrSpillOffset(MFI->getObjectOffset(FramePtrSpillFI) + NumBytes); AFI->setGPRCalleeSavedArea1Offset(GPRCS1Offset); AFI->setGPRCalleeSavedArea2Offset(GPRCS2Offset); AFI->setDPRCalleeSavedAreaOffset(DPRCSOffset); NumBytes = DPRCSOffset; if (NumBytes) { // Insert it after all the callee-save spills. emitSPUpdate(MBB, MBBI, TII, dl, *this, -NumBytes); } if (STI.isTargetELF() && hasFP(MF)) { MFI->setOffsetAdjustment(MFI->getOffsetAdjustment() - AFI->getFramePtrSpillOffset()); } AFI->setGPRCalleeSavedArea1Size(GPRCS1Size); AFI->setGPRCalleeSavedArea2Size(GPRCS2Size); AFI->setDPRCalleeSavedAreaSize(DPRCSSize); }